B26-044
Service Bulletin/Repair Instructions
Service Bulletin - Certain 2024 ZDX vehicles may have improperly installed or missing cavity plugs from the rear chassis harness electrical connector.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
B26-044
Service Bulletin - Certain 2024 ZDX vehicles may have improperly installed or missing cavity plugs from the rear chassis harness electrical connector.
BEBM06262026901
Dealer Message - Due to improper manufacturing, the rear chassis harness connector may not be properly sealed and only partially seated. An unsealed connector in a half set condition may allow for water or debris intrusion, potentially causing corrosion or damage to wire harness connections which may lead to loss of brake assist, parking brake stuck on/off, or inconsistent unit operation while driving.
ONL6MH04202024A
Owner Notification Letter - The software update includes several system improvements designed to enhance the functionality of certain vehicle features. These enhancements may include updates related to braking, driver seat movement, virtual key card operation, adaptive cruise control, and active cabin ventilation.
BPOC04172026902
Dealer Message -American Honda is requesting parts in support of a quality investigation related to Rear View Camera part number 86583111. All dealers that have inventory of Rear View Camera part number 86583111 are asked to inspect current inventory and return parts meeting the described return criteria to American Honda.
ONL6MZ04102026
Owner Notification Letter - Some 2024 ZDX models may have misrouted camera wires causing the multi-view display images to be reversed.
ONL6YU04092026
Owner Notification Letter - Some 2024 ZDX vehicles’ Electric Park Brake (EPB) harness may not have enough clearance away from the half-shaft boot causing the harness to rub against the boot during normal driving and accelerating wear to the boot.
B26-039
Service Bulletin - The warning message "Service Leveling System" displaying on dash with an active C1194 DTC set against the K5 Automatic Level Control Module due to possible internal contamination of the Air Suspension Control Module Manifold.
ONL6WY01302026
Owner Notification Letter - During the manufacturing process of the rear electric drive module (eAxle), the mounting nut may have been improperly torqued or misaligned, potentially resulting in a loose or cross-threaded condition. This condition could lead to fluid leakage from the rear drive module, accompanied by a whine noise, possibly leading to a loss of driving force.
B25-038
Service Bulletin - During the manufacturing process of the rear electric drive module (eAxle), the mounting nut may have been improperly torqued or misaligned, potentially resulting in a loose or cross-threaded condition. This condition could lead to fluid leakage from the rear drive module, accompanied by a whine noise, possibly leading to a loss of driving force.
AEBM10312025901
Dealer Message - During the manufacturing process of the rear electric drive module, the mounting nut may have been improperly torqued or misaligned, potentially resulting in a loose or cross-threaded condition. This condition could lead to fluid leakage from the rear drive module, accompanied by a whine noise, possibly leading to a loss of driving force.
B25-044
Service Bulletin - Vehicle-Wide Programming (VWP), also known as SPS3-VWP, is a feature within Techline Connect (TLC) to update all applicable control module software at the same time. When initiated, all applicable updates are done in parallel, instead of the conventional individual control module update. Customers may have complaints or concerns that may get resolved by doing this software update.
B25-033
Service Bulletin - An update to A11 Radio Control Module software to address known issues.
B25-034
Service Bulletin - Customers are experiencing issues with OnStar and HondaLink due to the software within the telematics control unit needing a software update.
B25-025
Service Bulletin - A Malfunction Indicator Lamp (MIL) may illuminate, or a “Service High Voltage” message may appear. Additionally, the 12-volt battery may intermittently or persistently discharge due to an internal Battery Energy Control Module (BECM) calibration anomaly causing the setting of specific DTCs related to battery performance and communication.
ONL6MZ04072025
Owner Notification Letter - Some 2024 ZDX models may have misrouted camera wires causing the multi-view display images to be reversed.
ONL6YU04072025
Owner Notification Letter - Some 2024 ZDX vehicles’ Electric Park Brake (EPB) harness may not have enough clearance away from the half-shaft boot causing the harness to rub against the boot during normal driving and accelerating wear to the boot.
B25-022
Service Bulletin - An intermittent loss of heating or cooling in the cabin and may display a "Service High Voltage" message and DTC B2BAA due to a software issue.
B25-005
Service Bulletin - The Electric Park Brake (EPB) harness may not have enough clearance away from the half-shaft boot causing the harness to rub against the boot during normal driving and accelerating wear to the boot.
B25-016
Service Bulletin - During manufacturing, wires may have been misrouted in the multi-view camera wire harness causing the left and right images to be swapped when the vehicle is in reverse.
BEBM03072025901
Dealer Message - The Electric Park Brake (EPB) harness unit may have low clearance to the driveshaft boot resulting in increased wear.
BEBM03072025902
Dealer Message - During manufacturing, wire harnesses may have been misrouted in the multi-view camera causing the left and right images to be swapped when the vehicle is in reverse.
ONL6MZ032025
Dealer Notification Letter - During manufacturing, wire harnesses may have been misrouted in the multi-view camera causing the left and right images to be swapped when the vehicle is in reverse.
ONL6YU032025
Dealer Notification Letter - The Electric Park Brake (EPB) harness unit may have low clearance to the driveshaft boot resulting in increased wear.
B24-042
Service Bulletin - The procedure for the sunroof/sunshade motor initialization in Service Information is incorrect. Use the revised procedure outlined in this service bulletin.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.