Vehicle report

2019 ALFA ROMEO GIULIA

Compare every ALFA ROMEO GIULIA yearNHTSA and EPA records

Service bulletins

114 bulletins

Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.

22D Combo Rev1

Warranty Program/Extension

Emissions Recall 22D - On Board Diagnostics - Dealer Notification (Revision 1)

22D Combo

Warranty Program/Extension

Emissions Recall 22D - On Board Diagnostics - Dealer Notification

112842

Service Bulletin/Repair Instructions

BOLT - HEX FLANGE HEAD

2623000037 REV.A

Service Bulletin/Repair Instructions

Condensation Or Water Infiltration In Headlights, Daytime Running Lights (DRL), Turn Signals, Fog Lights, Taillights. Rev A

S2623000037

Service Bulletin/Repair Instructions

Condensation Or Water Infiltration In Headlights, Daytime Running Lights (DRL), Turn Signals, Fog Lights, Taillights.

01-001-26

Service Bulletin/Repair Instructions

Oil Change Monitor Displaying Prematurely Customers may experience the following: ● The oil change light illuminated on the dash shortly after taking delivery of the vehicle within 6,437 Km (4,000 miles) This bulletin involves resetting the oil life monitor and if necessary changing the engine oil and filter.

S2621000003 REV.A

Service Bulletin/Repair Instructions

The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.

S1408000384 REV.J

Service Bulletin/Repair Instructions

Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

S1408000384 REV.I

Service Bulletin/Repair Instructions

Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On

64C Combo

Service Campaign

Customer Satisfaction Notification 64C – Powertrain Control Module Wiring Harness- Dealer Notification

08-394-25 REV. A

Service Bulletin/Repair Instructions

Telematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present Technicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure.

9100734

Service Bulletin/Repair Instructions

If the DTC B1E21-96: Backup Battery-Component Internal Failure is active and customer states Popup message will show at the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347

08-394-25

Service Bulletin/Repair Instructions

Telematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present echnicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure

9100325 Rev 1

Service Bulletin/Repair Instructions

Before replacing any parts please refer to SOL S2518000008 if it applies to the vehicle you are working on based on a VIN search in Service Library. Before replacing this part due to Engine Light On with P1CEA (Boost Side EVAP Purge System Performance), check for: 1) Improperly connected or kinked/pinched Purge Hoses at the Ejector Tees on the Air Box or Duct. 2) Improperly connected or kinked/pinched Purge Hose at the Purge Solenoid or OBD Valve. 3) Improperly connected or kinked/pinched Purge Hose at the Intake. 4) Check for the correct Purge Hoses installation.

02-002-25 REV. A

Service Bulletin/Repair Instructions

Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts.

31-001-25 REV. B

Service Bulletin/Repair Instructions

Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

31-001-25 REV. A

Service Bulletin/Repair Instructions

Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.

31-001-25

Service Bulletin/Repair Instructions

Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates

02-002-25

Service Bulletin/Repair Instructions

Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts.

18-016-25

Service Bulletin/Repair Instructions

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0072-00 - Ambient Air Temperature Sensor Circuit Low. ● P0073-00 - Ambient Air Temperature Sensor Circuit High. ● P00B2-00 - Radiator Coolant Temperature Sensor Circuit Range-performance. ● P0607-00 - Control Module Performance. ● P02CD-00 - Cylinder 1 Fuel Injector Offset Learning At Max Limit. ● P02CF-00 - Cylinder 2 Fuel Injector Offset Learning At Max Limit. ● P02D1-00 - Cylinder 3 Fuel Injector Offset Learning At Max Limit. ● P02D3-00 - Cylinder 4 Fuel Injector Offset Learning At Max Limit. ● P02D5-00 - Cylinder 5 Fuel Injector Offset Learning At Max Limit. ● P02D7-00 - Cylinder 6 Fuel Injector Offset Learning At Max Limit. ● P02CC-00 - Cylinder 1 Fuel Injector Offset Learning At Min Limit. ● P02CE-00 - Cylinder 2 Fuel Injector Offset Learning At Min Limit. ● P02D0-00 - Cylinder 3 Fuel Injector Offset Learning At Min Limit. ● P02D2-00 - Cylinder 4 Fuel Injector Offset Learning At Min Limit. ● P02D4-00 - Cylinder 5 Fuel Injector Offset Learning At Min Limit. ● P02D6-00 - Cylinder 6 Fuel Injector Offset Learning At Min Limit.** ● P032D-00 - Knock Sensor 3 Circuit High. ● P008A-00 - Low Pressure Fuel System Pressure - Too Low. ● P034C-00 - ION Sense System Performance. **The customer may also experience the following: ● Vehicle is in limp mode.** REPAIR SUMMARY: This bulletin involves reprogramming the PCM with the latest available software.

18-017-25

Service Bulletin/Repair Instructions

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0072-00 - Ambient Air Temperature Sensor Circuit Low. ● P0073-00 - Ambient Air Temperature Sensor Circuit High. ● P00B2-00 - Radiator Coolant Temperature Sensor Circuit Range-performance. ● P0607-00 - Control Module Performance. ● P02CD-00 - Cylinder 1 Fuel Injector Offset Learning At Max Limit. ● P02CF-00 - Cylinder 2 Fuel Injector Offset Learning At Max Limit. REPAIR SUMMARY: This bulletin involves reprogramming the PCM with the latest available software ● P02D1-00 - Cylinder 3 Fuel Injector Offset Learning At Max Limit. ● P02D3-00 - Cylinder 4 Fuel Injector Offset Learning At Max Limit. ● P02D5-00 - Cylinder 5 Fuel Injector Offset Learning At Max Limit. ● P02D7-00 - Cylinder 6 Fuel Injector Offset Learning At Max Limit. ● P02CC-00 - Cylinder 1 Fuel Injector Offset Learning At Min Limit. ● P02CE-00 - Cylinder 2 Fuel Injector Offset Learning At Min Limit. ● P02D0-00 - Cylinder 3 Fuel Injector Offset Learning At Min Limit. ● P02D2-00 - Cylinder 4 Fuel Injector Offset Learning At Min Limit. ● P02D4-00 - Cylinder 5 Fuel Injector Offset Learning At Min Limit. ● P02D6-00 - Cylinder 6 Fuel Injector Offset Learning At Min Limit.** ● P032D-00 - Knock Sensor 3 Circuit High. ● P008A-00 - Low Pressure Fuel System Pressure - Too Low. ● P034C-00 - ION Sense System Performance. **The customer may also experience the following: ● Vehicle is in limp mode.* REPAIR SUMMARY: This bulletin involves reprogramming the PCM with the latest available software

S1408000384 REV.H

Service Bulletin/Repair Instructions

S1705000002 REV.A

Service Bulletin/Repair Instructions

Front Brake Pulsation and/or Clunk Noise

S1408000384 REV.G

Service Bulletin/Repair Instructions

S2408000056 REV.A

Service Bulletin/Repair Instructions

Forward Collision Warning (FCW), or Adaptive Cruise Control (ACC) Warning Lamps Illuminate on The Instrument Panel Cluster (IPC)

9100468

Service Bulletin/Repair Instructions

FUEL VAPOR CANISTER FILTER EVAP Fuel Filters are to be checked for restriction / blockage on a regular schedule as indicated in the Owner s Manual. If the Filter is restricted or blocked then replace the part. For customers that drive light duty trucks in extreme dusty and dirty road conditions, please reference information only TSB 25-009-24 for an available MOPAR Dual EVAP Filter kit that is customer paid.

9100469

Service Bulletin/Repair Instructions

VAPOR CANISTER If an issue is detected with the EVAPORATIVE SYSTEM INTEGRITY MODULE DETECTOR and not the VAPOR CANISTER, only replace the EVAPORATIVE SYSTEM INTEGRITY MODULE DETECTOR.

01-002-24

Service Bulletin/Repair Instructions

Oil Change Monitor Displaying Prematurely Customers may experience the following: ● The oil change light illuminated on the dash shortly after taking delivery of the vehicle within 6,437 Km (4,000 miles). This bulletin involves resetting the oil life monitor and if necessary changing the engine oil and filter.

S228A000017 REV.A

Service Bulletin/Repair Instructions

Battery Drain Suspected or "Identified" From USB or Media Hub

31-001-24

Service Bulletin/Repair Instructions

Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

S1408000384 REV.F

Service Bulletin/Repair Instructions

S2408000056

Service Bulletin/Repair Instructions

Forward Collision Warning (FCW), or Adaptive Cruise Control (ACC) Warning Lamps Illuminate on The Instrument Panel Cluster (IPC)

S1408000384

Service Bulletin/Repair Instructions

9100229

Service Bulletin/Repair Instructions

LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.

9100226

Service Bulletin/Repair Instructions

Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.

93023

Service Bulletin/Repair Instructions

Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)

93120

Service Bulletin/Repair Instructions

FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC

9100196

Service Bulletin/Repair Instructions

Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used

S2308000089

Service Bulletin/Repair Instructions

The Replacement BCM Front Harness Is Not The Same As The Original

0700723

Service Bulletin/Repair Instructions

Water Quality When Mixed With Engine Coolant

9100142

Service Bulletin/Repair Instructions

Mirror

1804823

Service Bulletin/Repair Instructions

wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK

1804623

Service Bulletin/Repair Instructions

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set: ? **P0331-00 - Knock Sensor 2 Circuit Range/Performance.** ? P0106-00 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance. ? P013A-00 - O2 Sensor Slow Response Rich To Lean Bank 1 Sensor 2. ? P015A-00 - O2 Sensor Delayed Response Rich To Lean Bank 1 Sensor 1. ? P026E-00 - Charge Air Cooler Coolant Pump Performance. ? U1008-00 - LIN 1 BUS. ? P1CEA-00 - Boost Side EVAP Purge System Performance. Customers may experience one or more of the following: ? Not passing vehicle certification during state inspections if performed after a system reset. ? Drive-ability issues. In addition, the following improvement is also available: ? Turbo coolant pump after run duration and on-off strategy update, to improve turbo O-ring durability. This bulletin involves reprogramming the PCM with the latest available software.

3100123

Service Bulletin/Repair Instructions

Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

S2308000004

Service Bulletin/Repair Instructions

Vehicle Cranks, No Start

31-002-22

Service Bulletin/Repair Instructions

Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.

0100122

Service Bulletin/Repair Instructions

Oil Change Monitor Displaying Prematurely This bulletin involves resetting the oil life monitor and if necessary changing the engine oil and filter. The customer may experience the oil change light illuminated on the dash shortly after taking delivery of the vehicle within 6,437 Km (4,000 miles).

S2218000018

Service Bulletin/Repair Instructions

Check engine lamp/Mil lamp-on. Engine misfires.

3100122

Service Bulletin/Repair Instructions

Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.

S2223000047

Service Bulletin/Repair Instructions

ACC Does Not Operate. Start Stop Unavailable, ACC Unavailable Service Required Messages. C1452-86 Engine Torque DASM- Signal Invalid

S2209000004

Service Bulletin/Repair Instructions

If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.

S2208000073

Service Bulletin/Repair Instructions

No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting

S1708000118

Service Bulletin/Repair Instructions

Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off

S1708000118 RevB

Service Bulletin/Repair Instructions

Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off

S2108000198

Service Bulletin/Repair Instructions

Media Device Connection Guidelines For Bluetooth, Apple CarPlay, Android Auto Or USB To The Radio Head Unit

S2108000163

Service Bulletin/Repair Instructions

No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration

S2109000004

Service Bulletin/Repair Instructions

Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.

S1809000007

Service Bulletin/Repair Instructions

Customer Complaint May Include Engine Oil Leak Or Consumption

S1809000007RevC

Service Bulletin/Repair Instructions

Customer Complaint May Include Engine Oil Leak Or Consumption

9004386

Service Bulletin/Repair Instructions

WIRING, Body Before replacing this harness, please contact FCA Redacted Content to see if a repair kit is available for your application. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content

S1608000226

Service Bulletin/Repair Instructions

Battery Tester Warranty Code Procedures, Midtronics Charger Update Process

S2008000113

Service Bulletin/Repair Instructions

No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message

S2008000113 Rev.

Service Bulletin/Repair Instructions

No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message

S16080002261

Service Bulletin/Repair Instructions

Battery Tester Warranty Code Procedures, Medtronic Update Process

S1821000001

Service Bulletin/Repair Instructions

Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders

9004009

Service Bulletin/Repair Instructions

Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.

S1809000007 Rev.

Service Bulletin/Repair Instructions

Customer complaint may include engine oil leak/consumption.

S2124000004

Service Bulletin/Repair Instructions

A/C does not cool and vehicle is low on Freon charge but no leak is found with sniffer or black light anywhere in the system

01-001-21

Service Bulletin/Repair Instructions

0100121

Service Bulletin/Repair Instructions

08-023-21

Service Bulletin/Repair Instructions

Flash: Drive Style Control Module (DSCM) Updates This bulletin involves checking if the vehicle dynamic (DNA) selector is operableand possibly reprogramming the DSCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DiagnosticTrouble Code (DTC) has been set in the DSCM:U1700-87 - Body Control Module (BCM) - Missing Message. U0011-14 - Down Rotary Knob Failure-Circuit Short To Ground Or Open. U0011-15 - Down Rotary Knob Failure-Circuit Short To Battery Or Open. U0012-15 - Up Rotary Knob Failure-Circuit Short To Battery Or Open. B1603-68 - Rotary Encoder Fault-Event Information. The following DTC has been set in the Body Control Module (BCM):U1A20-87 - DSCM (Drive Style Control Module) - Missing Message. The customer may also comment on the following: The vehicle dynamic (DNA) selector is inoperable.

0802321

Service Bulletin/Repair Instructions

08-107-20

Service Bulletin/Repair Instructions

Flash: Drive Style Control Module (DSCM) Updates This bulletin involves checking if the vehicle dynamic (DNA) selector is operable and possibly reprogramming the DSCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set in the DSCM:U1700-87 - BCM (Body Control Module) Node-Missing Message. The following DTC has been set in the Body Control Module (BCM):U1A20-87 - DSCM (Drive Style Control Module) - Missing Message. The customer may also comment on the following:The vehicle dynamic (DNA) selector is inoperable.

S2018000014

Service Bulletin/Repair Instructions

Customer complaint includes Mil/Check Engine light on and possibly experiencing engine running rough for 60-90 seconds following a cold start. Upon further investigation there may be a fault code for P0300 -Multiple Cylinder Misfire DTC pending, stored, or active in the Powertrain Control Module (PCM).

9004335

Service Bulletin/Repair Instructions

Turbocharger If the turbo is being replaced for an oil leak concern, please inspect the area around the turbo oil feed o-ring for a leak. The o-ring is serviced separately and complete turbo replacement may not be necessary.

S1708000262

Service Bulletin/Repair Instructions

(Rev. A) Check Engine Lamp Is On, Intermittent Module CAN Private Or LIN BUS Codes

S1708000262 Rev.

Service Bulletin/Repair Instructions

(Rev. A) Check Engine Lamp Is On, Intermittent Module CAN Private Or LIN BUS Codes

S2018000012

Service Bulletin/Repair Instructions

Check engine lamp on. Fault code P0244- TURBOCHARGER/SUPERCHARGER WASTEGATE SOLENOID "A" RANGE/PERFORMANCE is set in the Powertrain Control Module (PCM a.k.a. ECM) after the turbocharger assembly has been replaced.

S2018000011

Service Bulletin/Repair Instructions

Issue includes a fault code(s) set in the Powertrain Control Module (PCM) for P0299, P0300, P0301, P0302, P0303, and/or P0304 after performing the PCM software update process for Customer Satisfaction Notification (CSN) W05.

S2024000006

Service Bulletin/Repair Instructions

After Module Replacement A/C Systems Do Not Operate Properly. DTC B1938-64 Humidity Sensor LIN Bus ? Signal Plausibility Failure

9003637

Service Bulletin/Repair Instructions

USB PORT, Media Hub For Android Auto and Apple Carplay issues, do not replace this part. Android Auto and Apple Carplay applications may not operate with the vehicle if an aftermarket cable is being used. Verify the functionality of these applications using an OEM Apple Lightning cable or an OEM provided USB cable for Android phones before performing any additional troubleshooting. For questions regarding Android Auto or Apply Carplay functionality, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.

S2008000010

Service Bulletin/Repair Instructions

Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns

S2008000093

Service Bulletin/Repair Instructions

Blind Spot Or Park Assist Warnings, False Activation

08-065-20

Service Bulletin/Repair Instructions

RAN RAP RAG and RSD 2.5 Radio Software Enhancements This bulletin involves inspecting and if required, updating the radio to software level to MV 090.000.061The customer should be informed that after the reprogram, the radio will need to have the phones paired to theEntertainment Telematics Module (ETM). The operative details for pairing telephones and settings are shown in the Owner Handbook of the infotainment module. Some customers may experience one or more of the following: Radio may reboot while driving.Software update will help correct existing issue. Radio stays on if you exit the vehicle during a phone call. When the vehicle is remote started the radio will turn on at the previously set volume level.

0806520

Service Bulletin/Repair Instructions

18-051-20

Service Bulletin/Repair Instructions

P00C0-00 Turbocharger-Supercharger Bypass Valve 2 Control Circuit This bulletin involves inspecting and if necessary replacing the connector for the left turbocharger bypass valve and installing a protective cover. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find the following Diagnostic Trouble Code (DTC) has been set:P00C0-00 Turbocharger-Supercharger Bypass Valve 2 Control Circuit

1805120

Service Bulletin/Repair Instructions

S2018000008

Service Bulletin/Repair Instructions

Engine Surge Feel and/or Diagnostic Trouble Code P0299 ? Turbo Underboost Condition After Updating The Powertrain Control Module (PCM) Software. (ETL, ETM, ETN Engines)

S2008000079

Service Bulletin/Repair Instructions

Cluster Engine Run Hours Resets To Zero While Driving

S2008000080

Service Bulletin/Repair Instructions

Intermittent Crank Not Start

23-015-20

Service Bulletin/Repair Instructions

Disinfectant Solution Recommended for COVID-19

08-049-20

Service Bulletin/Repair Instructions

Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.

18-039-20

Service Bulletin/Repair Instructions

Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season

S2019000002

Service Bulletin/Repair Instructions

Hands On Steering Wheel Message In EVIC

S2018000004

Service Bulletin/Repair Instructions

Issue includes a fault code set in the powertrain control module (PCM ) for U04B1-00-Invalid Data Received From Battery Monitor Module after flashing PCM for Customer Satisfaction Notification (CSN) W05.

01-001-20

Service Bulletin/Repair Instructions

18-025-20

Service Bulletin/Repair Instructions

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Engine Control Module (ECM), also knownas a PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs have been set:P0106-00 - Manifold Absolute Pressure/Barometric Pressure Circuit Range/Performance. P013A-00 - O2 Sensor Slow Response - Rich To Lean Bank 1 Sensor 2. P015A-00 - O2 Sensor Delayed Response - Rich To Lean Bank 1 Sensor 1. P026E-00 - Charge Air Cooler Coolant Pump Performance. U1008-00 - LIN 1 BUS. P1CEA-00 - Boost Side EVAP Purge System Performance. Customers may also experience one or more of the following:Not passing vehicle certification during state inspections if performedafter a system reset. Drive-ability issues. In addition, the following improvement is also available:Turbo coolant pump after run duration and on-off strategy update, to improveturbo O-ring durability.

S2008000021

Service Bulletin/Repair Instructions

PCM ESS Inhibits List Show Driver Door Condition Inhibiting The S&S

W05

Service Bulletin/Repair Instructions

Customer Satisfaction Notification W05 Reprogram Powertrain Control Module

S2008000017

Service Bulletin/Repair Instructions

ESS Unavailable In Areas 5,250 Feet (1600 Meters) Above Sea Level

S2008000013

Service Bulletin/Repair Instructions

Key Programming, Security Pin Request, Pin Invalid

18-098-19

Service Bulletin/Repair Instructions

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Engine Control Module (ECM), also known as a PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P013A-00 - O2 Sensor Slow Response - Rich To Lean Bank 1 Sensor 2. P015A-00 - O2 Sensor Delayed Response - Rich To Lean Bank 1 Sensor 1. P026E-00 - Charge Air Cooler Coolant Pump Performance. U1008-00 - LIN 1 BUS. P1CEA-00 - Boost Side EVAP Purge System Performance. Customers may also experience one or more of the following:Not passing vehicle certification during state inspections if performed after a system reset. Drive-ability issues. In addition, the following improvement is also available:Turbo coolant pump after run duration and on-off strategy update, to improve turbo O-ring durability.

21-045-19

Service Bulletin/Repair Instructions

Flash: Transmission Control Module (TCM) Update This bulletin involves reprogramming the TCM with the latest available software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find thefollowing Diagnostic Trouble Codes (DTCs) have been set: P0002-00 - Fuel Volume Regulator "A" Control Circuit Performance. P026E-00 - Charge Air Cooler Coolant Pump Performance. P1066-00 - Cylinder 1 Oil Supply Solenoid Valve Switch Off Time Out Of Range. P26E4-00 - Starter Relay "B" Circuit. P2B61-00 - Engine Coolant Flow Control Valve Stuck Closed. P2BC1-00 - Lt Water Pump Smart Driver Module. U1008-00 - LIN 1 Bus. Enhancements to this software release:Transmission shift quality improvements.

31-004-19

Service Bulletin/Repair Instructions

Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.

31-005-19

Service Bulletin/Repair Instructions

Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.

3100319

Service Bulletin/Repair Instructions

Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.

3100419

Service Bulletin/Repair Instructions

3100519

Service Bulletin/Repair Instructions

Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.

3100619

Service Bulletin/Repair Instructions

Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.

18-089-19

Service Bulletin/Repair Instructions

wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK

1808919

Service Bulletin/Repair Instructions

wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK

9004150

Service Bulletin/Repair Instructions

SEAL, Input If looking to replace stubshaft due to ATX fluid leaking, do not replace PTU seals. None of the seals from the PTU side will need to be replaced whenever the ATX stubshaft is replaced, even though V-seal (68408748A$) is in direct contact with the stubshaft, it will not avoid grease/oil leakage from transmission side. PTU V-seals are intended to act as a dust cover for stubshaft - PTU input shaft spline interface. PTU Input shaft seal (68408749A$) is intended to hold PTU oil and debris ingress; it should be replaced only if the fluid leakage is confirmed to be PTU oil and not ATX trans. fluid.

9003220

Service Bulletin/Repair Instructions

RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.

08-081-19

Service Bulletin/Repair Instructions

RAN RAP RAG and RSD 2.5 Radio Software Enhancements This bulletin involves inspecting and if required, updating the radio to software level MV 085.000.046. The customer should be informed that after the reprogram, the radio will need to have the phones paired to the Entertainment Telematics Module (ETM). The operative details for pairing telephones and settings are shown in the OwnerHandbook of the infotainment module. Some customers may experience one or more of the following:Radio may reboot while driving. Radio stays on if you exit the vehicle during a phone call. When the vehicle is remote started the radio will turn on at the previously set volume level.

Reading this report

Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.