Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
CSR-3339
Service Bulletin/Repair Instructions
Altec Industries, Inc. has received notification from Ford Motor Company that certain 2017-2025 F-450 – F-600 Chassis Cab upfitted with an Aerial Bucket Second Unit Body (SUB) could have a condition related to the operation or customer satisfaction of the unit when equipped with an Altec aerial device. If the vehicle is upfitted with an Aerial Bucket Second Unit Body (SUB), the SUB may cause stress on the frame rail during use, which might lead to cracks in the frame rail.
CSR-3352
Service Bulletin/Repair Instructions
Altec Industries, Inc. has received notification from FCA US LLC that certain 2025-2026 Ram 3500, 4500, and 5500 cab chassis vehicles with 6.7L engines equipped with Altec equipment may contain an engine emissions-related defect that could affect emissions compliance or motor vehicle safety.
CSR-3320
Service Bulletin/Repair Instructions
Altec Industries, Inc. has been notified of a condition affecting certain International HV, HX, eMV, CV, LT, RH, LoneStar, and MV Series trucks equipped with Altec equipment. Outdated Body Control Module (BCM) software may generate erroneous fault codes after the vehicle has been inactive for two to three days.
SIL-3273
Service Bulletin/Repair Instructions
Altec has received notification from Parker Chelsea, the manufacturer, of an issue with some of their 281 and 890 Series PTOs. An unintended restriction in lubrication flow may produce elevated back pressure in cold-start scenarios, leading to partial engagement of the clutch. Once the vehicle reaches normal operating temperature, the clutch drag will abate. In extreme cases, repeated cold starts may result in clutch disk damage and failure to engage when activated.
CSR-3287
Service Bulletin/Repair Instructions
Altec Industries, Inc. has received notification from Daimler Truck North America LLC (DTNA) that certain 2020-2026 Freightliner 108SD, 114SD, 122SD and Business Class M2 and Western Star 4700, 47X, 48X RHD and 49x vehicles equipped with an Altec aerial device or equipment could have fasteners in the axle clamp group that might not have been properly tightened and can loosen and fail. As a result, the axle could shift, leading to loss of vehicle control, increasing the risk of a crash.
CSR-3290
Service Bulletin/Repair Instructions
Altec Industries, Inc. has received notification from FCA US LLC that a condition exists that relates to motor vehicle safety and affects certain 2025 and 2026 model year (DP) Ram 4500/5500 Cab Chassis equipped with an Altec aerial device or equipment. On the potentially affected units the trailer tow module may experience a loss of trailer lighting and trailer brakes. The trailer turn signal will not flash when the vehicle turn signal lever is actuated and the trailer stop lights will not be activated upon application of the vehicle service brakes. In addition, if equipped, the trailer brakes will not function.