SPL-30-1545
Service Bulletin/Repair Instructions
Phased Launch of Bosch MTS 6531 VCI Unit
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SPL-30-1545
Phased Launch of Bosch MTS 6531 VCI Unit
SPL-10-1520
Compliance with E10 Fuel
OTH-19-1368
Crankshaft Sensor - High RPM Test
OTH-30-1308
Customer Handover Checklist
SB-07-0434V2
Introduction to AMShift
SPL-04-1273
Tyre data for vehicles from 17MY onward
SPL-03-1261
Recommended Engine Oils for V8 and V12 Naturally Aspirated Engines
SPL-30-1257
Welcome to Technical Hub
WPL-30-0320V2
Parts return requests PRRs
SPL-30-1244
Technical Assessments launched on the training academy
SPL-30-1257V2
Welcome to Technical Hub V2
SPL-30-1235
The Introduction of Tech Hub and Spotlight
SPL-30-1150
Instructions for the ATEQ TPMS / RKE Tool
SPL-15-1157
Aftermarket dash camera questionnaire
SB-01-1094
Deployable Spoiler wear inspection - annual check required.
SPL-03-1088
Introduction of a remanufactured long-block V8 engine
SPL-30-1074
EPDR Submission process update to existing SPL-30-0458
SPL-30-1148
To inform about the changes we are making to Technical Training along with the introduction of the 3 tier Technician grading system
SPL-30-1017
Reminder to do OBD In-use Monitoring with AMDS.
SPL-30-1036
New electrical content and HTML5 upgrade for Cortona 3D content on the dealer communication system (DCS).
SPL-30-1047
2018 Technical Training Update.
SPL-30-1022
Client Services Department Team Update.
SB030400V3
Procedure for the Bosch engine management system (EMS) to do the variable valve timing (VVT) learn procedure, and the engine misfire and fuelling corrections.
SB010420
Some markets do not need a front licence plate plinth to be installed to a vehicle. This gives instruction on how to install a front licence plate plinth if a vehicle moves to a region where this becomes a legal requirement.
QN-01-0056
Because of an error during manufacture, it is possible that some of the vehicles in the affected VIN (7 vehicles) list do not have the heat deflector installed for the fuel line.
QN-15-0047V2
The software is now available to let you install the Apple CarPlay feature. Amended to update procedure.
SA-15-0267V2
The software is now available to let you install the Apple CarPlay feature. Amended to update procedure.
QN-15-0047
The software is now available to let you install the Apple CarPlay feature.
SA-15-0267
The software is now available to let you install the Apple CarPlay feature.
SB-07-0440
Process if a Customer complains about six-speed manual transmission shift quality when cold.
SB-07-0434
Introduction to the new AMShift transmission.
SPL-12-0568V3
Introduction of new air conditioning refrigerant type in EU cars to comply with EU directive. Amended and issued again to describe special offer of equipment necessary to Dealers.
QN-06-0039
A quantity of V12 Vantage S and GT12 vehicles have been released from the factory that do not have the link harness installed for the brake pedal sensor. This fault can have an unwanted effect on a number of systems - for example, the Adaptive Damping System (ADS), the Dynamic Stability Control (DSC) system, the Traction Control (TC) system, and the Engine Management Control Module (ECM) - and can cause a number of Diagnostic Trouble Codes (DTCs) to display on AMDS. Please do the Workshop Procedure that follows to install the link harness.
SA-06-0260
A quantity of V12 Vantage S and GT12 vehicles have been released from the factory that do not have the link harness installed for the brake pedal sensor. This fault can have an unwanted effect on a number of systems - for example, the Adaptive Damping System (ADS), the Dynamic Stability Control (DSC) system, the Traction Control (TC) system, and the Engine Management Control Module (ECM) - and can cause a number of Diagnostic Trouble Codes (DTCs) to display on AMDS. Please do the Workshop Procedure that follows to install the link harness.
BPL-01-0023
The reason for this policy letter is to give you information that was not available before, when body repair policy BPL-01-0021 "Change of Paint Supplier" was published.
QN-18-0036
Modifications to the Electrical Connections on the V12 Starter Solenoid.
SA-18-0252
Modifications to the Electrical Connections on the V12 Starter Solenoid.
SB-01-0426
We have introduced a new special tool 43-28335 Docking Station Bezel Release Tool.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.