AWC 19-05
Service Bulletin/Repair Instructions
This communication is issued to inform dealers of updated shipping regulations related to lithium ion batteries.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
AWC 19-05
This communication is issued to inform dealers of updated shipping regulations related to lithium ion batteries.
AWC 19-04
This communication is issued to remind dealers of the repair validation process for repair group 19. 2005-2019 A3, 1996-2019 A4, 2008-2019 A5, 1992-2019 A6, 2012-2019 A7, 1997-2019 A8, 2019 E-Tron, 2015-2019 Q3, 2010-2019 Q5, 2007-2019 Q7, 2019 Q8, 2000-2019 TT, 2008-2018 R8
A941791 2012749-
This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
SM 44-2017 EN
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
A171782 2010043-
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
ATE-17-05
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
A441662 2010334-
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
A451510 2042048-
Vehicle will not communicate with diagnostic scan tool or emissions test equipment. Customers may have issues with vehicle passing state IM emissions test programs because the scan tool cannot communicate with the vehicle. ABS and/or brake lamp(s) will be illuminated in IP cluster. Broken ground bond wire within the ABS module (ABS 5.3 system) causes diagnostic communication issues with the ABS module, ECM, and TCM. Brake system and ABS system functionality are not affected by the broken ground circuit. This bulletin only addresses the communication issue (broken ground circuit) between the vehicle and the diagnostic scan tool described above. This bulletin does not address any subsequent vehicle diagnostic system issues that may exist. OBD system works normally; emission or diagnostic critical malfunctions will be indicated by MIL illumination. ABS system is not functionally affected by the broken ground circuit.
A191562 2025303-
Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
A1915612025303-5
Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
SB-01-15-29
AUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
A941565 2012749-
Supersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
A101511 2018288-
Supersedes Technical Service Bulletin Group 10 number 13-10 dated September 5, 2013. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these metal debris pieces are not removed prior to the installation and operation of the replacement engine, they could be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
A171557 2010043-
Supersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013. This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
A011507 2028344-
Supersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiring. This bulletin applies only to non-diesel engines.
Accessories Oper
This is an advance notice for Audi of America employees. This notice contains information for the accessories operations technical bulletin.
44145520103346
Tightening wheel bolts
A441455 2010334-
Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.
A001467 2002047-
Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
AUD4927ENG
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the State of Minnesota.
Edition92
Idenifying and mixing factory fill engine coolants
A191450 2025303-
Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Update91i8
Google Maps Street View (NVLW))
44134620103345
Tightening wheel bolts
A441346 2010334-
Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as outlined in Elsa. Proper use of a calibrated torque wrench ensures that all wheel bolts are tightened equally and reduces the chances of repeat repairs. Using methods other than a calibrated torque wrench to attain correct wheel bolt torque may lead to problems.
TSB-44-13-46
AUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
A901341 2010353-
Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
Edition53
Audi Elsa Newsletter
131020182884
If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
A101310 2018288-
Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
2013_06_ATU Audi
This document contains information on the Audi side assist update.
Edition42
Audi Elsa Newsletter
134120253033
Discontinuation and mixing of Audi-approved engine coolants.
A191341 2025303-
Supersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
133520253032
Discontinuation and mixing of Audi-approved engine coolants.
A001348 2002047-
Supersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
A191335 2025303-
Supersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
1335201004313
Engine oils that meet Audi Oil Quality Standards.
A941292 2012749-
Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens. Damp air settles on the inside of a cold lens, which creates condensation. The headlight circulation system allows air from the outside to flow through the headlights. This open waterprotected ventilation system (needed for pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively cool areas, where the lens is cooled own by the air flow. Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end, with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.
TSB-24-11-66
AUDI: IN COLD TEMPERATURES, ICE CAN ACCUMULATE ON THE THROTTLE BODY MAKING THE VEHICLE UNABLE TO RETURN TO IDLE.1998-1999 A6. *RM
TSB-44-08-14
AUDI: WHEEL BOLTS REQUIRE TORQUE ADJUSTMENT. TORQUE STICKS AND TORQUE EXTENSION BARS ARE NOT APPROVED BY AUDI OF AMERICA, INC. AND SHOULD NOT BE USED TO APPLY TORQUE TO WHEEL BOLTS. ALL AUDI MODELS INCLUDED. *PE
TSB-45-08-04
AUDI: ABS ACTIVATES DURING LIGHT BRAKE APPLICATION . CONTROL NOISES ARE HEARD FROM THE ABS UNIT AT LOW SPEED WITHOUT BRAKE APPLICATION. *PE
0715
EXTERIOR LIGHTS, MOISTURE ACCUMULATION. *NJ
TSB-94-07-15
AUDIO: EXTERIOR LIGHTS, MOISTURE ACCUMULATION. CONDENSATION IS VISIBLE ON THE INSIDE OF HEADLIGHTS, TAILLIGHTS, FOG LIGHTS, SIDE MARKER LIGHTS, FRONT TURN SIGNAL OR THIRD BRAKE LIGHT LENS. DAMP AIR SETTLES ON THE INSIDE OF A COLD LENS, WHICH CREATES CONDENSATION. *PE
20056243
HEADLIGHT AIMING, USING HELLA UNIVERSAL BEAMSETTER. *KB
2012749-2
EXTERIOR LIGHTS, MOSITURE ACCUMULATION. *PE
480501
POWER STEERING, NOISY. TO INCLUDE 2006 MODELS. *TT
0406
COOLANT LEAK AT OIL COOLER HOSES. *TT
11242004
SERVICE ACTION JE CAMPAIGN-CHECK/REPLACE FRONT SUSPENSION LOWER CONTROL ARMS. AUDI HAS FOUND THAT IN RARE CASES, ONE OR BOTH FRONT SUSPENSION LOWER CONTROL ARMS ON AFFECTED VEHICLES CAN EXHIBIT WEAR, EVEN THOUGH THE DAMAGE TO THE RUBBER BOOTS IS NOT OBVIOUS. *SC
JE
CHECK/REPLACE REPLACE FRONT SUSPENSION LOWER CONTROL ARMS. *TC
0404
THROTTLE BODY REPLACEMENT KIT INSTALLATION. *TC
0403
THROTTLE BODY REPLACEMENT KIT INSTALLATION. *TC
0408
LONG TERM FUEL TRIM - SYSTEM TOO RICH. DIAGNOSTIC TROUBLE CODE P1123, P1125, P1137 AND P1139. *TT
0402
VALVE COVER, DIAGNOSING OIL LEAKAGE FROM GASKETS. *TT
042804
SERVICE ACTION TO INSPECT LOWER CONTROL ARM SEALS. *TT
LQ
SERVICE ACTION CAMPAIGN - INSTALLATION OF FRONT BUMPER GUIDES. *TT
900104
SUBJECT REGARDING INSTRUMENT CLUSTER, DRIVER'S INFORMATION DISPLAY FADES. *JG
900102
SUBJECT REGARDING INSTRUMENT CLUSTER, DRIVER'S INFORMATION DISPLAY FADES. *JG
150102
A CONDITION MAY EXIST WHERE THE ENGINE CRANKS BUT WILL NOT START. *TT
0002
REVISED INFORMATION FOR VEHICLES EXHIBITING AN INCORRECT FUEL GAUGE READING. *TT
640001
A CONDITION MAY EXIST WHERE THE FRONT DOOR WINDOW(S) BIND OR DO NOT OPERATE WHEN OPENING OR CLOSING. *TT
0001
INFORMATION ON REPLACING DAMAGE FASTENERS WHEN A CONDITION EXIST WHERE THE REAR LICENSE PLATE FASTENERS MAY BE BROKEN, LOOSE OR FALLEN BEHIND THE LICENSE PLATE HOLDER / LENS ASSEMBLY.
9903
A CONDITION MAY EXIST WHERE THE FRONT DOOR WINDOW(S) BINDS OR DOES NOT OPERATE WHEN OPENING OR CLOSING. *TT
9808
SUBJECT ON CENTRAL LOCKING SYSTEM, FUNCTION OPTIONS. *YC
9802
CLUNKING OR RATTLING NOISE FROM ONE OR BOTH SIDES OF FRONT SUSPENSION WHEN DRIVING OVER ROUGH ROADS. *YC
9801
SUBJECT ON FLOOR MAT FASTENER VARIATIONS. *YC
9803
EXPERIENCING CREAKING / POPPING NOISES FROM REAR WINDOW. *YC
9809
SUBJECT REGARDING CELLULAR TELEPHONE INSTALLATION INSTRUCTIONS FOR VEHICLES WITHOUT INSULATED GLASS AND / OR WITHOUT FENDER MOUNTED ANTENNA. *TT
980598
SUBJECT PERTAINING TO AIRBAG SYSTEM WITH SIDE AIRBAGS. *YC
A9813
SUBJECT REGARDING REPAIR MANUAL BOOKLET. *AK
9803T
REVISIONS ON REPAIR MANUAL UPDATES. *YC
980269
DEACTIVATING AND ACTIVATING REAR SIDE AIRBAGS. *YC
9802J
REPAIR MANUAL UPDATES / REVISIONS ON THE CAMSHAFT POSITION (CMP) SENSOR. *YC
980491
INSTALLATION INSTRUCTIONS ON CELLULAR TELEPHONE FOR VEHICLES WITHOUT INSULATED GLASS. *YC
A9806
SUBJECT ON ELECTRICAL WIRING DIAGRAMS, TROUBLESHOOTING & COMPONENT LOCATIONS TECHNICAL BULLETING NO. 3. *YC
970298
CONDITION WITH WINDSHIELD WATER LEAK. *YC
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.