TSB_2074436_3
Service Bulletin/Repair Instructions
This bulletin provides information when the horn sound quality is poor.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
TSB_2074436_3
This bulletin provides information when the horn sound quality is poor.
TSB_2063546_5
This bulletin provides service infomraiton regardin gthe identifaction of noises with dynamic steering.
TSB_2069078_4
This bulletin provides information on the zirconium insercts in the brake piston (ceramic brakes only).
TSB_2069904_3
This bulletin provides information for all models regarding brake sounds.
TSB_2072304_4
This bulletin provides information when there is an ABS/ESC speed sensor implausible signal.
TSB_20741717_15
This bulletin provides information on the GFF test plan required for AC compressor replacements regardless of the concern.
TSB_2075120_3
This bulletin provides information about the general approach for brake vibration concerns.
TSB_2079732_2
This bulletin provides information when there is a paint issue on alloy wheels.
TSB_2082846_1
This bulletin provides a statement regarding the bottleneck of supply for VW approved oil types VW 504.00 and VW 507.00.
TSB_2073282_1
This bulletin provides information when there is a film/visible rings on the clear glass cover of the headlight when the dipped beam is switched on.
TSB_2028902_5
This bulletin provides informaiton when the transmission warning message appears in the cluster; P074100 stored in the TCM.
TSB_2028985_13
This bulleitn procides informaiton when tehre is a transmission warning mssage in the instrument cluster; P074100 is stored in the TCM.
TSB_2059335_7
This bulletin provides information when there are noises from the area around the instrument cluster.
TSB_2074729_3
This bulletin provides informationwhen noises/vibration are detected from front of vehicle in dynamic mode.
TSB_2082046_1
This bulletin provides information when there is a strong jolt after engine automatically starts in start-stop mode; vehicles with 0BK & 0BL Gearbox.
TSB_2082054_1
This bulleitn provides information when there is a delayed accelerator response.
TSB_2082323_1
This bulletin provides informaiton when the engine is not running smoothly, misfiring.
TSB_2052680_6
This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.
AOS-26-25
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle programming function: A software fix is needed to correct the issue: The ODIS Audi Brand update 2.41.1 is setting a ODS5003E error code when you perform the 90TV SVM flash.
TSB_2022032_12
This bulletin provides diagnostic information for the vehicle locking system.
TSB_2070568_6
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
TSB_2081531_1
This Reporting obligation requests that technicians contact the Technical Assistance Center (TAC) when the diagnostic tester refers to this reportin gobligation or to TPI 2033392.
TSB_2081409_1
This bulletin provides informaiton regarding the Universal Traffic Recorder.
TSB_2023187_8
This bulletin provides informaiotn regarding squeaking noises when steering or maneuvering.
TSB_2081405_1
This bulletin provides informaiotn about various infortainment system complaints.
TSB_2024323_13
This bulletin provides information when the parking assistance gives false warnings.
DC_Audi_CF_ Airbag
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent warning regarding counterfeit replacement airbag inflators that are being installed in used vehicles.
TSB_2024323_12
This bulletin provides information when the parking assistance gives false warnings.
TSB_2021205_10
This bulletin provides information on VIN Plates, Safety Certification labels, and the ordering procedures.
TSB_2059335_6
This TSB provides information when there are noises from the area around the instrument cluster.
TSB_2052680_4
This Reporting Obligation requires technicains to contact the Technical Assistance Center (TAC) in cases where the airbag/seatbelt is deployed/not deployed; general accident information; and fire and overheat damage.
TSB_2080329_1
This bulletin provides informaiotn when there are noises from the headliner.
TSB_2080681_1
This bulletin provides information regarding contact checks for event memories, intermittent.
TSB_2060750_5
This bulletin provides information regarding UV leak additive for finding oil leaks.
TSB_2074846_4
This bulletin provides information about vibrations and rotational steering vibrations.
TSB_2056019_5
This bulletin provides information when the anti-theft alarm activates for no reason, or does not activate.
TSB_2021205_9
This bulletin provides information on VIN Plates, Safety Certification labels, and the ordering procedures.
TSB_2018187_18
This bulletin provides information when there are speaker rattles, vibrations, or audio interference.
TSB_2069904_2
This bulletin provides information for all models regarding brake sounds.
TSB_2069078_3
This bulletin provides information on the zirconium insercts in the brake piston (ceramic brakes only).
TSB_2075120_2
This bulletin provides information regarding the general approach for all Audi vehicles regarding brake vibrations.
TSB_2030471_8
This bulletin provides informaiton when the license plate mouting bracket threaded inserts are stripped.
TSB_2056386_11
This bulletin provides information about the steering wheel alignment.
TSB_2072304_3
This bulletin provides information when there is an ABS/ESC speed sensor implausible signal.
TSB_2074846_3
This TSB provides information regarding rotational and other steerihng wheel vibrations.
TSB_2079732_1
This bulletin provides information when tehre is a paint issue on alloy wheels.
TSB_2047812_8
This bulletin provides information on how to set up and use the FMC for obtaining vehicle software updates (SD Creator decomissioned).
TSB_2073917_2
This bulletin provides information for when there is a fluid sample request from Product Support.
TSB_2076605_2
This TSB provides informaiton pertaining to noises from the guide link bush.
TSB_2071264_2
This bulleitn provides information whent here are complaints about route guidance with Navigation.
TSB_2041717_14
This bujlletin provides information regarding the GFF test plan required for A/C compressor replacements regardless of the concern.
TSB_2042920_3
This bulletin provides information when there is corrosion on the tailpipes.
TSB_2070568_5
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
TSB_2074436_2
This bulletin provides information when the horn sound quality is poor.
AOS-25-47
This is a notice for software changes with the ODIS diagnostic program to correct the communication during vehicle programming function: The hotfix is to correct the issue: Issue seen: ODS5003E Infrastructure Guided Fault Finding: An internal fatal error occurred during the G929 - Vehicle Interior Carbon Dioxide Concentration Sensor function test plan. NOTE: This ODS error could show up on any other GFF function test plans as well.
TSB_2060750_4
This bulleitn provides information regarding UV Leak additive for finding oil leaks.
TSB_2027368_7
This TSB provides information when the Audi advanced key is inoperative; door handle touch sensors.
TSB_2010353_6
This TSB provides informatin when the cigarette lighter element does not eject, or the cigarette lighter is inoperable.
TSB_2070568_4
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
TSB_2042920_2
This bulletin provides information when there is corrosion on the exhaust tail pipes.
TSB_2074857_2
This bulletin provides information when there are noises/vibrations in tight bends; Q7 and A8 models.
TSB_2056019_4
This bulletin provides information when the anti-theft alarm activates for no reason, or when the anti-theft alarm does not activate.
TSB_2077320_2
This TSB is a label placement guide as required by CARB for remanufactured parts.
TSB_2031473_6
This service information TSB describes a cosmetic issue after using a car wash.
TSB_2071893_2
This TSB provides damage assessment guidelines for textile seat covers.
TSB_2077320_1
This TSB is a label placement guide as required by CARB for remanufactured parts.
TSB_2075530_2
This bulletin provides informatin when the engine does not run smoothly at idling speeds.
TSB_2041717_13
This bulletin provides information regarding the GFF test plan required for A/C compressr replaements regardless of the concern.
TSB_2071185_2
This bulletin provides information regarding various comlaints related to Apple CarPlay with Apple iOS devices.
TSB-2076945_1
This bulletin provides information about leather care and seat repair.
A6625162049680_3
This TSB provides information when the exterior rubber trim is spotted.
A4025932076605_1
This TSB provides informaiton pertaining to noises from the guide link bush.
A3725312074822_2
This bulletin provides information when noises from wheel input shaft/drive shaft are reported.
A8724952041717_12
This bulletin provides information when a GFF test plan required for A/C compressor replacements regardless of concern.
A6624152046229_5
This bulletin provides informationw hen there are optical defects, scratches, and/or chrome peeling.
A2724842074729_2
This bulletin provides information in circumstances where there are noises/vibration from front of vehicle in dynamic mode.
A4424092056386_10
This bulletin provides information regarding wheel alignment.
A0124482014753_13
This bulletin provides information when the MIL is on; DTCs for misfire, air/fuel ratio imbalance, or lean fuel system stored in the ECM P030000.
A9124872024323_11
This TSB Provides information when parking assistance provides false warnings.
A9124842018187_17
This bulletin provides information when speaker rattles, vibrations, or audio interference is noted.
A0024992070568_3
This bulletin provides information about professional noise analysis with the VAS 611 015 PICO-NVH tool
A9624072056019_3
This bulletin provides information when the anti-theft alarm activates for no reason, or when the anti-theft alarm does not activate.
A5724652022032_11
This bulletin provides diagnostic information regarding the locking system.
SM 64-2024
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
A1524532075530_1
This bulletin provides informatin when the engine does not run smoothly at idling speeds.
CampTip_RNA_Audi
Vehicle Concerns Before Recall Repair Available
A3924742074859_1
This bulletin provides additional information pertaining to continued noises/vibrations in tight bends - Q7 and A8 vehicle models.
A2424632074810_2
This bulletin provides information when ther is an Engine: start/stop system fault shown and start/stop system not is working; mileage below 50 km/32 miles.
A8724892041717_11
This bulletin provides information pertaining to the GFF test plan required for A/C compressore replacements, regardless of the concern.
A0024932002047_13
This bulletin provides guidance in order to provid informaiton regarding preparatoin when calling the Audi Technical Assistnce Center (TAC).
A4424082074846_2
This bulletin provides information when there are vibrations and rotational steering wheel vibrations.
A0024922031473_5
This bulletin provides informationw hen there are car was brush bristles trapped in the seam between the headlight and fender.
A4324982075100_1
This bulletin provides information on repairs on the air spring strut of the frong axle; additional sealing.
A4524462072304_2
This bulleitn provides information when there is an implausible signal in the ABS/ESC speed sensor.
A4524492075120_1
This bulletin provides information regarding the general approach to brakes rubbing.
A4624592069078_2
This bulletin provides informaion regarding zirconium inserts in the bake piston for vehicle equipped with ceramic brakes.
A3924722059129_6
This bulletin provides information when there are noises and/or vibration in tight turns in vehicles with quattro drive.
A3924692074857_1
This bulletin provides information when there are noises/vibrations in tight bends; Q7 and A8 models.
A9124432074929_1
This bulletin proves information when the bluetooth does not work, adaption channel deactivated.
A0024902074853_1
This bulletin provides service information ror when the fuel tank cannot be fully filled.
A3724222074826_1
This bulletin offers information about the basic information needed for technical requests for gaerbox complaints.
A4424062074846_1
This bulletin provides information vibrations and rotational steering wheel vibrations.
A2424612074810_1
This bulletin provides information when there is a fault shown; Engine: start/stop system, and the start system is not working; mileage below 50 km/32 miles.
A2724762074729_1
This bulletin provides information when there are noises/vibration from the front of the vehicle while in dynamic mode.
A3724132074750_1
This bulletin provides information about replacing the clutch end cover.
A3724142074751_1
This bulletin provides information about replacing the clutch end cover.
A3724212074822_1
This bulletin provides service information pertaining to noises from wheel input shaft/drive shaft.
A9124322018187_16
This bulletin provides informaiton when there are speaker rattles, vibrations or audio interference in the sound system.
A8224002041717_10
This bulletin provides informatin for the GFF test plan that is requied for AC compressor replacements.
A0024872002047_12
This bulletin provides Audi technicians with information to prepare for contact to the Technical Assistance Center (TAC).
A9024082074436_1
This bulletin provides informaiton for when the horn sound quality is poor.
A9124252018187_15
This bulletin provides informaiton when there are speaker rattles, vibrations, or audio interference.A1
A9424822074347_1
This bulletin provides informationw hen there are optical concerns with the tail lights.
A9124162018187_14
This bulletin provides information when there are speaker rattles, vibration or audio interference.
A5724432027368_5
This bulletin provides information when the door handle touch sensors for Audi advanced key are inoperative.
A9424812073332_3
This bulletin provides information when there is noise while steering.
A5724422025031_3
This bulletin provides information when the exterior trunk handle is inoperative.
AWA 24-04
Diagnosed and confirmed malfunction of the vehicle’s AEB system that resulted from failure or malfunction of the AEB system’s control unit, camera(s), LIDAR, and/or sensor(s) which enable automatic emergency braking functionality.
A1124002073917_1
This bulletin provides information for when there is a fluid sample request from Product Support.
A0024852021205_8
This bulletin provides information on the ordering procedures for VIN Plates, and Safety Certification labels.
A9024842032113_9
This bulletin provides general information regarding outside air temperature readings.
A9624962027416_7
This bulletin provides information when the sunglass holder will not close or is stuck closed.
A9024832059335_5
This bulletin provides information when there is noise from around the instrument cluster.
A9424762073332_2
This bulletin provides information for when there is noise when steering.
A2724712067906_5
This bulletin provides information for when DTC P0A7D00 is stored.
A5724342017082_1
This bulletin provides information when the remote control key is inoperative.
A9624952073471_1
This bulletin provides information when various driver assistance systems are unavailable - DTC C110702, B201200.
A9424742073332_1
This bulletin provides information if there is noise when steering the vehicle.
A9424722073282_1
This bulletin provides information on visual concerns with the headlight lens.
A9124632044694_3
This bulletin provides information pertaining to MMI Navigation database concerns.
A6824452038904_2
This bulletin provides information when the power outlet compartment is detached from the center console.
A7024872038029_9
This bulletin provides information for when there are noises from the headliner/sunroof area.
A0023822047812_7
This bulletin provides information on how to set up and use the SD Creator for obtaining vehicle software updates via the Mirror Server.
A912306202432310
This bulletin provides information when the parking assistance provides false warnings.
A4523362072304_1
This bulletin provides information for when the ABS/ESC speed sensor has an implausible signal.
A9023562032113_8
This bulletin provides general information about the outside air temperature reading.
A6623042030471_7
This bulletin provides information for when the license plate mounting bracket threaded inserts are stripped.
A0023812070568_2
This bulletin provides information on the VAS 611 015 PICO-NVH tool for professional noise analysis.
A9423672071954_1
This bulletin provides information pertaining to when there are foreign objects inside of a headlight or taillight.
A7423262071893_1
This bulletin provides damage assessment guidelines for textile seat covers.
A0023762071721_1
This bulletin provides information for when unauthorized/unjustified DTC memory entries are captured in ODIS test Plans (Ghost faults).
A0123812028842_4
This bulletin provides instructions regarding unauthorized chip tuning (TD1).
A0023742052680_4
This bulletin provides information on the additional reporting requirements for safety related inquiries.
A0023712070568_1
This bulletin provides information on professional noise analysis with the VAS 611 015 PICO NVH Tool.
A9123262071264_1
This bulletin provides information for when the customer has concerns about the navigation route guidance.
A6423922020552_1
This bulletin provides information for when exterior glass cleaning is needed.
A8723452041717_9
This bulletin provides information on the GFF test plan required when replacing the A/C compressor.
A9023322059335_4
This bulletin provides information for when there is noise from the area around the instrument cluster.
A922336203815115
This bulletin provides information for when the washer solvent level warning is on.
A4623452070679_1
This bulletin provides information for when one or more DC is stored in the ABS control unit related to the parking switch; DTC C100C07 and/or C100C29.
A4823412028220_1
This bulletin provides information for instances where the steering wheel leather is damaged.
A102326201828810
This bulletin provides information on checking for debris when replacing an engine.
A9423652061922_3
This bulletin provides detailed information on the proper documentation of optical concerns for headlights and taillights.
A5723082027406_5
This bulletin provides information regarding the Audi advanced key.
A922335203815114
This bulletin provides instructions for when the washer level warning is on but the reservoir is full.
A0023702021205_7
This bulletin provides instructions for ordering replacement Safety Certification labels or VIN plates.
A0023692031473_4
This bulletin provides information for when car wash bristles become stuck in the body gap between the headlight and fender.
A912394201818713
This bulletin provides information for when the customer advises that there is cracking, grinding, rattling, humming, whining, or similar interference.
A9423632061922_2
This bulletin provides details on how to properly document optical concerns in headlights and taillights for warranty submissions.
A4423992056386_9
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
A4423982056386_8
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
A4623432069904_1
This bulletin provides information for when there are noises when braking, and the brake pad thickness is OK.
A9023222032113_7
This information bulletin contains a background on the outside air temperature reading.
A192336202530314
This bulletin provides information on the discontinuation and mixing of Audi-approved engine coolants.
A4023512023187_7
This bulletin states that squeaking noises which may be more prevalent in wet weather during steering is normal and repair is not needed.
A9623822056019_2
This bulletin provides instructions for when the anti-theft alarm has gone off for no reason, or did not go off at all. No DTCs are stored.
A462341203418123
This bulletin provides instructions for brake noise analysis and handling.
A012341201475312
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A9223332038151
This bulletin provides instructions for when the washer solvent level warning is on in the DIS but the washer solvent level is correct.
DC_Alternator_6
Support for Customers Affected by Alternator Back-order
A6623942049680_2
This bulletin provides instructions for when the exterior trim has spots.
A4423972022563_2
This bulletin provides instructions for when a vibration is felt in the floor, seat, footwell, pedals or steering wheel while driving at highway speeds from 55 - 80 mph.
DC_Alternator_4
Support for Customers Affected by Alternator Back-order
DC_Alternator_5
Support for Customers Affected by Alternator Back-order
A8023122062583_2
This bulletin provides instructions for when the customer advises that there is insufficient or uneven cabin heating from the HVAC system.
DC_Alternator_3
Support for Customers Affected by Alternator Back-order
A9123592036576_7
This bulletin advises that the MMI screen may freeze, or go blank and then restart when a special character like a symbol or emoticon is used in the name field for contact(s).
A4623402069078_1
This bulletin contains instructions for when the zirconium inserts found to be not firmly attached during service work.
DC_Alternator_2
Support for Customers Affected by Alternator Back-order
DC_Alternator
Support for Customers Affected by Alternator Back-order
DC_RECALLS
SAFETY RECALLS, COMPLIANCE RECALLS and STOP SALES
A572200202203210
This technical service bulletin provides troubleshooting information for the vehicle locking system.
SM 74-2022
This special notice is to inform dealers to return the parts listed only order the successor parts going forward.
A462234203418122
This technical service bulletin provides troubleshooting for brake noise.
A4822342065978_2
This bulletin explains that the steering wheel may warm up while being held leading to the impression that he steering wheel isn't heating evenly.
A922230203815112
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A642285202055211
This bulletin provides instructions on how to properly clean exterior glass.
SM 48-2022
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
A4622332051095_7
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
A462232203418121
This technical service bulletin provides troubleshooting for brake noise.
SM 47-2022
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
A4522262067132_1
This informational bulletin contains instructions for when the message "Audi pre sense currently restricted. See owner's manual" is displayed in the instrument cluster without DTCs.
A4622312051095_6
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
A442292202256321
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A8722272041717_8
This informational bulletin details on how to get a GFF test plan for A/C compressor replacements.
A872225201014617
This bulletin contains instructions for properly cleaning and removing a musty odor from the heating and ventilation system.
A9022572032113_6
This is an informational bulletin containing information about the outside temperature reading.
A9022582059335_3
This bulletin contains information on noises from the instrument cluster installation area.
A462230203418120
This technical service bulletin provides troubleshooting for brake noise.
A402237202431811
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
DC_20220329
Dealer Communication: Vehicle Sales Reporting, Reinstatement, and Audit Policy
A1722172060750_3
This bulletin contains instructions for using the UV additive to find engine oil leaks.
A4622282051095_5
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
A012216203300126
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A9122752024323_9
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A442287202256320
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A462226202258411
This informational bulletin provides diagnostic information for brake conditions.
A462227203418119
This technical service bulletin provides troubleshooting for brake noise.
A192228202530313
This bulletin contains instructions for identifying and mixing factory fill coolants.
A192227202530312
This bulletin contains instructions for identifying and mixing factory fill coolants.
A4421862056386_7
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
A4021302023187_6
This information bulletin provides an explanation for squeaking noises heard when the steering wheel is turned or maneuvered.
A4021312024318_1
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
A002155201173212
This bulletin contains general instructions for software updates.
A4421842065160_1
This informational bulletin explains how the temporary/collapsible spare wheel inflates.
DC 20210928
Dealer Communication - Vehicle Sales Reporting, Reinstatement, and Audit Policy Update - Effective September 30, 2021
A9121342018187_1
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
A012111203300125
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A8721162041717_7
This informational bulletin details on how to get a GFF test plan for A/C compressor replacements.
A0121102028842_3
This informational bulletin gives instructions for identifying chip tuning.
A4821092028220_9
This technical service bulletin informs the reader that damage to the appearance of the leather steering wheel caused by outside influence is not covered under warranty.
A4421832056386_6
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
A1921222046712_3
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant expansion tank cap.
A0021482021205_6
This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
A0021472031473_3
This information bulletin states to remove the car wash bristle and advise the customer to go somewhere else to prevent it from occurring again.
SM 44-2021
This special notice is to inform dealers to return the parts listed if it meets the criteria provided.
A9121042024323_8
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A0021442052680_3
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage).
A1021222018288_9
This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
A9021032058077_5
This bulletin contains instructions for determining unexpected Audi presense interventions.
A1721162060033_3
This bulletin contains repair instrructions for when there are noises in the engine compartment with DTC P052E00.
A4421822056386_5
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
A6421802020552_1
This bulletin provides instructions on how to clean exterior glass.
A8721132010146_1
This bulletin contains instructions for properly cleaning and removing a musty odor in the vehicle.
ELSAallignAudi
Elsa2Go campaign information is now 100% aligned with ElsaPro. This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time without any discrepancy.
37 13 04 2028561
New software in the gear shift control module addressed the condition.
A9021002032113_5
This information bulletin contains a background on the outside air temperature reading.
37 13 02 2029027
The DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored as a result of the following situations: ? DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is being maneuvered in or out of a parking spot). ? DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a low diagnosis threshold. ? DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to a low diagnosis threshold.
A4021242016453_4
This bulletin contains instructions for determining if bushings need to be replaced.
A9021982059335_2
This bulletin contains information on noises from the instrument cluster installation area.
A7021722038029_8
This bulletin contains repair instructions for various squeaks and/or rattles that are heard from the roof area on vehicles equipped with pananormic sunroof.
A5721752022032_9
This technical service bulletin provides troubleshooting information for the vehicle locking system.
A9121862062713_1
This bulletin contains repair instructions for when there is radio static when the rear heater is active.
A8021112062583_1
This bulletin contains instructions for addressing an insufficient or uneven heating performance from the HVAC system.
A9421362023322_3
This informational bulletin contains information on the different shading of LED headlights.
A1321132062387_1
This bulletin contains instructions for determining if a repair is needed when coolant touches a poly V-belt and/or a toothed belt.
A4621252054385_2
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill (crawling when pulling away or briefly before standstill).
A4421802056386_4
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
A4621222051095_4
This informational bulletin contains instructions on how to download and use the Audi Frequency App.
A462123202258410
This informational bulletin provides diagnostic information for brake conditions.
A462124203418118
This technical service bulletin provides troubleshooting for brake noise.
A4421792022563_1
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A6621692030471_6
This informational bulletin covers the condition of when license plate mounting bracket threaded inserts are stripped.
A9421332061922_1
This informational contains instruction on how to document optical concerns for warranty claims.
A1721122060750_2
This bulletin contains instructions for using the UV additive to find engine oil leaks.
A9121642024323_7
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
SM C-2020
This special notice is to inform dealers to return the part numbers listed (State of California only).
A012093203300124
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A9120242026611_7
This bulletin contains a guide for troubleshooting HD radio issues.
A1720112060750_1
This bulletin contains instructions for using the UV additive to find engine oil leaks.
21AUTIRECHAINS
Added new graphic to reflect where to find MY 21 information
A0120882033001_2
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A1920082042328_5
This bulletin contains repair instructions for when the tolerances of the opening spring in the thermostat are not enough.
A9020652032113_4
This information bulletin contains a background on the outside air temperature reading.
A1720102060033_2
This bulletin contains repair instrructions for when there are noises in the engine compartment with DTC P052E00.
Audi Part Labels
Recall Reminder Part Labels
A1720072060033_1
This bulletin contains repair instructions for when there are noises in the engine compartment with DTC P052E00.
A1720082060259_1
This bulletin contains repair instructions for when DTC P052E00 is stored with noise coming from the engine compartment.
A012072203300122
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A3720012039650_2
This bulletin contains instructions for addressing a leak from the transmission oil pan gasket or transfer case.
A1720062028440_5
This informational bulletin explains when the range display is empty in the on-board computer.
A1920042025303_1
This bulletin contains instructions for identifying and mixing factory fill coolants.
A9020512058077_4
This bulletin contains instructions for determining unexpected Audi pre sense interventions.
A0020382039206_3
This informational bulletin contains instructions on how to use the QR code in a TSB.
A9120732026390_7
This bulletin contains instructions for correcting the phonebook.
A9120702044694_2
This technical service bulletin provides troubleshooting for issues with the navigation map database.
A4020052024318_9
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
A9120652036576_6
This informational bulletin contains instructions for when a phone is connected to the vehicle via Bluetooth, one of the following conditions occurs when the user searches for a contact name in the MMI address book (by using the MMI control knob or the voice recognition system): *The MMI screen goes blank then restarts. *The MMI screen freezes for a few minutes then recovers.
A6420742020552_9
This bulletin provides instructions on how to clean exterior glass.
A012062203300121
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A0020372059437_1
The informational bulletin explains why during COVID-19 there is winter-blend fuel during a warmer season and causing some issues.
A872005201014615
This bulletin contains instructions for properly cleaning and removing a musty odor in the vehicle.
A9020442032113_3
This information bulletin contains a background on the outside air temperature reading.
A9020452059335_1
This bulletin contains information on noises from the instrument cluster installation area.
A0020362002047_1
This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
A012058203300120
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A012054201475311
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A942020201780613
This bulletin contains information regarding when the message 'Vehicle lights: malfunction' appears with DTC 03280, 01800, or B126AF0.
A5120132009967_1
This bulletin contains instructions for vehicle inspection, protection removal, and detailing.
A012046201475310
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A912039201818711
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
A4420732056386_3
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
A9020372058077_3
This bulletin contains instructions for determining unexpected Audi pre sense interventions.
A9020362058077_2
This bulletin contains instructions for determining unexpected Audi pre sense interventions.
12AUA8LFLUIDCAP
6.3L W12 CEJA engine oil capacity changed to 11.2L (11.8 qts).
A921924203815111
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A0019292031473_2
This informational bulletin contains instructions for when car wash bristles are stuck in the headlights. 2015-2021 A3 Cabriolet, 2015-2018 A3 e-tron, 2011-2021 A4 allroad, 2018-2021 A5 Sportback, 2011-2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 RS6 Avant
A9419182012749_1
Exterior lights, moisture accumulation 2013-2021 A3 Cabriolet, 2016-2018 Sportback, 2004-2005 A4 Cabriolet, 2004-2008 S4 Cabriolet, 2008 RS4 Cabriolet, 2010-2021 A4 allroad, 2018-2021 A5 Sportback, 2010-2012, 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2004-2006 A7, 2004-2011 S7, 2021 RS6 Avant, 2004-2006 S8
20AUTIRECHAINS
New document 2004-2020 A4 allroad, A6 allroad, A8L, R8 Spyder
A9219232038151_1
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct. 2015-2021 A3 Cabriolet, 2016-2018 A3 Sportback, 2018-2021 A5 Sportback, 2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 RS 6 Avant
A4419712022563_1
This bulletin provides information regarding vibrations or movement that are felt in the wheel. 2015-2020 A3 Cabriolet, 2016-2018 A3 Sportback, 2008-2009 S4 Cabriolet, 2008 and 2010 RS4 Cabriolet, 2018-2020 A5 Sportback, 2010-2012 and 2018-2020 RS5 Cabriolet, 2018-2020 S5 Sportback, 2008 A7, 2008-2011 S7
145320381292
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
A7019682038029_7
This bulletin contains repair instructions for various squeaks and/or rattles that are heard from the roof area on vehicles equipped with pananormic sunroof.
A4019972018194_9
This bulletin contains repair instructions for leaking shock absorbers.
A0019262052680_2
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage.
ATUBody2019
Body components - Examples of customer misuse
ATUChassis2019
Wheel change mode/jacking mode - Description and usage
A0019252011732_1
00 Software Version Management (SVM), operating instructions
A9419132017806_1
This bulletin contains information regarding when the message 'Vehicle lights: malfunction' appears with DTC 03280, 01800, or B126AF0.
A9119882024323_6
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A1719982028440_4
This informational bulletin explains when the range display is empty in the on-board computer. Also A3 Cabriolet 2015-2021, A3 Sportback 2016-2018, 2005 A4 Cabriolet , 2005-2009 S4 Cabriolet, 2010-2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 S6, 2005 and 2006 A7, 2005-2011 and 2021 S7 2005-2006 and 2021 S8, 2019-2021 E-Tron Quattro
A9619432056019_1
This bulletin contains instructions for when the anti-theft alarm went off for no reason or did not go off. Includes A3 Cabriolet 2015-2020, 2010-2020 A4 Allroad, 2018-2020 A5 Sportback, RS5 Cabriolet 2010-2012 and 2018-2020, 2018-2020 S5 Sportback, 2010-2011 S7, 2010 S8, 2019-2020 e-tron Quattro.
AWC 19-05
This communication is issued to inform dealers of updated shipping regulations related to lithium ion batteries.
AWC 19-04
This communication is issued to remind dealers of the repair validation process for repair group 19. 2005-2019 A3, 1996-2019 A4, 2008-2019 A5, 1992-2019 A6, 2012-2019 A7, 1997-2019 A8, 2019 E-Tron, 2015-2019 Q3, 2010-2019 Q5, 2007-2019 Q7, 2019 Q8, 2000-2019 TT, 2008-2018 R8
A011919203300119
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A4819792028220_8
This technical service bulletin informs the reader that damage to the appearance of the leather steering wheel caused by outside influence is not covered under warranty. 2008-2020 A3, 2015-2020 A3 Cabrio, 2005-2016 A3 Sportback, 2005-2020 A4, 2010-2020 A4 allroad, 2005-2012 A4 Avant, 2005-2009 A4 Cabrio, 2010-2020 A5 Cabrio, 2008-2020 A5 Coupe, 2018-2020 A5 Sportback, 2005-2020 A6, 2005-2011 A6 Avant, 2008-2020 A7, 2005-2020 A8, 2008-2019 e-tron, 2019-2020 e-tron quattro, 2015-2020 Q3, 2009-2020 Q5, 2007-2020 Q7, 2019-2020 Q8, 2008-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2007-2008 RS4, 2008 RS4 Cabrio, 2010-2020 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2004-2012 S4, 2004-2009 S4 Cabrio, 2010-2020 S5 Cabrio, 2008-2020 S5 Coupe, 2018-2020 S5 Sportback, 2007-2020 S6, 2008-2020 S7, 2007-2009 S8, 2018-2020 SQ5, 2004-2020 TT Coupe, 2004-2020 TT Roadster, 2012 TT/RS Coupe
A0019222047812_6
This informational bulletin contains instructions for setting up and using the SD Creator program. 2010-2021 A3, 2015-2021 A3 Cabrio, 2010-2016 A3 Sportback, 2010-2021 A4, 2010-2021 A4 allroad, 2010-2012 A4 Avant, 2010-2021 A5 Cabrio, 2010-2021 A5 Coupe, 2018-2021 A5 Sportback, 2010-2021 A6, 2010-2021 A7, 2010-2021 A8, 2010-2019 e-tron, 2019-2021 e-tron quattro, 2015-2021 Q3, 2010-2021 Q5, 2010-2021 Q7, 2019-2021 Q8, 2010-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2010-2021 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2010-2012 S4, 2010-2021 S5 Cabrio, 2010-2021 S5 Coupe, 2018-2021 S5 Sportback, 2010-2021 S6, 2010-2020 S7, 2010-2021 SQ5, 2010-2021 TT Coupe, 2010-2021 TT Roadster
A8719912041717_6
This informational bulletin details on how to get a GFF test plan for A/C compressor replacements. 2010-2021 A3, 2015-2021 A3 Cabrio, 2010-2016 A3 Sportback, 2010-2021 A4, 2010-2021 A4 allroad, 2010-2012 A4 Avant, 2010-2021 A5 Cabrio, 2010-2021 A5 Coupe, 2018-2021 A5 Sportback, 2010-2021 A6, 2010-2021 A7, 2010-2021 A8, 2010-2019 e-tron, 2015-2021 Q3, 2010-2021 Q5, 2010-2021 Q7, 2019-2021 Q8, 2010-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2010-2021 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2010-2012 S4, 2010-2021 S5 Cabrio, 2010-2021 S5 Coupe, 2018-2021 S5 Sportback, 2010-2021 S6, 2010-2020 S7, 2010-2021 SQ5, 2010-2021 TT Coupe, 2010-2021 TT Roadster
A9019192032113_2
This information bulletin contains a background on the outside air temperature reading. 2008-2020 A3, 2015-2020 A3 Cabrio, 2008-2016 A3 Sportback, 2008-2020 A4, 2010-2020 A4 allroad, 2008-2012 A4 Avant, 2008-2009 A4 Cabrio, 2010-2020 A5 Cabrio, 2008-2020 A5 Coupe, 2018-2020 A5 Sportback, 2008-2020 A6, 2008-2011 A6 Avant, 2008-2020 A7, 2008-2020 A8, 2008-2019 e-tron, 2015-2020 Q3, 2009-2020 Q5, 2007-2020 Q7, 2019-2020 Q8, 2008-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2008 RS4, 2008 RS4 Cabrio, 2010-2020 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2008-2012 S4, 2008-2009 S4 Cabrio, 2010-2020 S5 Cabrio, 2008-2020 S5 Coupe, 2018-2020 S5 Sportback, 2008-2020 S6, 2008-2020 S7, 2008-2009 S8, 2018-2021 SQ5, 2008-2020 TT Coupe, 2008-2020 TT Roadster, 2012 TT/RS Coupe
A9119652050565_2
This bulletin contains general software update instructions for vehicles with PR Code 7UH. 2016-2020 A3, 2016-2020 A3 Cabrio, 2016 A3 Sportback, 2016-2020 A4, 2016-2020 A4 allroad, 2016-2012 A4 Avant, 2016-2020 A5 Cabrio, 2016-2020 A5 Coupe, 2018-2020 A5 Sportback, 2016-2020 A6, 2016-2020 A7, 2016-2020 A8, 2016-2020 e-tron, 2019-2020 e-tron quattro, 2016-2020 Q3, 2016-2020 Q5, 2016-2020 Q7, 2016-2020 Q8, 2016-2020 R8 Coupe, 2016-2020 R8 Spyder, 2017-2019 RS3, 2016-2020 RS5, 2016-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2016-2020 S5 Cabrio, 2016-2020 S5 Coupe, 2018-2020 S5 Sportback, 2016-2020 S6, 2016-2020 S7, 2018-2021 SQ5, 2016-2020 TT Coupe, 2016-2020 TT Roadster
80B8_Closure
Dealer announcement of expiration of the campaign.
A0019212052680_1
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage). 2008-2021A3, 2015-2021A3 Cabrio, 2005-2016 A3 Sportback, 1999-2021 A4, 2010-2021 A4 allroad, 1999-2012 A4 Avant, 2003-2009 A4 Cabrio, 2010-2021 A5 Cabrio, 2008-2021 A5 Coupe, 2018-2021 A5 Sportback, 1999-2021A6, 1999-2011A6 Avant, 2008-2020 A7, 1999-2021 A8, 2008-2019 e-tron, 2019-2021 e-tron quattro, 2015-2021 Q3, 2009-2021 Q5, 2007-2021 Q7, 2019 Q8, 2008-2020 R8 Coupe, 2011-2020 R8 Spyder, 2017-2019 RS3, 2007-2008 RS4, 2008 RS4 Cabrio, 2010-2021 RS5, 2010-2020 RS5 Cabrio, 2016-2018 RS6, 2016-2018 RS7, 2004-2012 S4, 2004-2009 S4 Cabrio, 2010-2021 S5 Cabrio, 2008-2021 S5 Coupe, 2018-2021 S5 Sportback, 2007-2021 S6, 2008-2020 S7, 2007-2009 S8, 2018-2021 SQ5, 2000-2021 TT Coupe, 2001-2021 TT Roadster, 2012 TT/RS Coupe
A201916203507314
This bulletin contains repair instructions for when the MIL is on and the DTC P045600 is stored in the ECM. This document also applies to the 2015 A3 Cabriolet and the 2015 A4 Cabriolet.
A201913203507313
This bulletin contains repair instructions for when the MIL is on and the DTC P045600 is stored in the ECM. Vehicles also include 2015 A3 Cabriolet and 2012 RS7,
A571954 20220328
This technical service bulletin provides troubleshooting information for the vehicle locking system.
A961934 20489272
This informational bulletin contains instructions for minimizing the risk of an unintentional opening of the trunk lid with the remote.
A011902 2033001
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A921916 2038151
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A441969 2022563
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A461903 2034181
This technical service bulletin provides troubleshooting for brake noise.
A001915 2047812
This informational bulletin contains instructions for setting up and using the SD creator program.
A011894 2033001
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A911821 2051527
This informational bulletin contains instructions for when the Sirius presets are missing with no DTCs.
A011893 2033001-
This bulletin provides instructions on how to clean the secondary air ports if they have too much carbon and cause a restriction.
A911800 2051527-
This informational bulletin contains instructions for when the Sirius presets are missing with no DTCs.
A911899 2051527-
This informational bulletin contains instructions for when the Sirius presets are missing with no DTCs.
A911895
This bulletin contains instructions for removing the HD radio feature if requested by the customer.
A911895 2026657-
This bulletin contains instructions for removing the HD radio feature if requested by the customer.
A701866 2038029_
This bulletin contains repair instructions for various squeaks and/or rattles that are heard from the roof area on vehicles equipped with pananormic sunroof.
A911873 2039476_
This informational bulletin is hardware update for vehicles that can no longer receive 2G service from T Mobile.
A011852 2050329_
This bulletin contains repair instructions for when the MIL is on and there are one of several DTCs stored in the ECM.
A971860 2036764_
This bulletin contains repair instructions for when the vehicle will not start and DTC P068A00 is stored.
A001706 2047812-
This informational bulletin contains instructions for setting up and using the SD creator program.
A961721 2048927-
This informational bulletin contains instructions for minimizing the risk of an unintentional opening of the trunk lid with the remote.
A911757 2039476
This bulletin is hardware update for vehicles that can no longer receive 2G service from T Mobile
A511711 2009967-
This bulletin contains instructions for vehicle inspection, protection removal, and detailing.
A911750 2030465-
This technical service bulletin provides troubleshooting tips for various issues with the MMI3G+ functionality.
Maint Flip Chart
Revision to Tires-rotate: 5K only; added "(except R8)"
A911745 2030465-
This technical service bulletin provides troubleshooting tips for various issues with the MMI3G+ functionality.
A911743 2042097-
This informational bulletin contains resource information for when the traffic feature is inoperative in the MMI navigation.
SM 52-2017
This special notice is to inform dealers to return all tail lamps with the part number listed that are below generation 14s.
A941791 2012749-
This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
A911736 2024323-
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A401774 2024318-
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
A191789 2046712-
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant expansion tank cap.
A401770 2018194-
This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
A401768 2024318-
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
SM 44-2017 EN
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
A401766 2024318
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
A911732 2033355-
This informational bulletin contains information on why ACC sensor could be deactivated.
A001794 2035581-
This informational bulletins contains instructions for proper oil filling for a W12 engine.
A001793 2047812-
This informational bulletin contains instructions for setting up and using the SD creator program.
A191786 2042328-
This bulletin contains repair instructions for when the tolerences of the opening spring in the thermostat are not enough.
A441764 2022563-
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A171782 2010043-
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
A301722 2019850-
This technical service bulletin provides guidelines for diagnosing the clutch plate.
A011710 2035002-
This bulletin contains diagnosis and repair information for DTC P049100 and P049200.
A401761 2024318-
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
A571740 2047432-
This bulletin contains repair information for when the remote key has low range or the functions do not work. This is for all keys and there is no relevant DTCs stored.
A901775 2030193-
This informational bulletin contains details about a normal function of the top view camera system.
Edition76
Technical bulletins and updates
ATE-17-05
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
A941786 2030960-
This bulletin contains repair information for when moisture accumulates in the headlamps.
A701756 2038029-
This bulletin contains repair instructions for various squeaks and/or rattles that are heard from the roof area on vehicles equipped with pananormic sunroof.
A191777 2046712-
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant expansion tank cap.
A371773 2029027-
This bulletin provides a software update for a transmission warning light and in some cases the vehicle will not move.
A011695 2027732_
THIS BULLETING PROVIDES A SOFTWARE UPDATE AND POTENTIAL PART REPLACEMENT FOR A MIL ON BUT THERE IS NO LEAK IN THE EVAP SYSTEM.
A011694 2027732_
THIS BULLETING PROVIDES A SOFTWARE UPDATE AND POTENTIAL PART REPLACEMENT FOR A MIL ON BUT THERE IS NO LEAK IN THE EVAP SYSTEM.
A961613 2034000-
This bulletin provides a software update for lane change assistance faults stored in the control module.
A151631 2045732_
THIS BULLETIN PROVIDES INFORMATION ON REMOVING A DAMAGED SCREEN FROM THE NON-RETURN VALVE.
AWA-16-08
This is a general communication notifying dealers that there is extended Warranty coverage available for the NVLD pressure switch for certain models and model years. This document details the terms of the warranty extension.
A911693 2028141_
THIS BULLETIN PROVIDES SOFTWARE UPDATE INFORMATION FOR THE MMMI 3G OR RMC FOR NAVIGATION DATA.
A921614 2038151-
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A461662 2031135-
This technical bulletin provides an explanation for a one-time DTC that appears in the control module.
A871679 2041717-
This bulletin applies to any repair that requires replacement of the air conditioning compressor and details how to run a ODIS GFF test plan.
A011685 2041120-
This bulletin provides information regarding a software update for DTC P042000 and/or P043000.
A151630 2045732-
This bulletin provides information on removing a damaged screen from the non-return valve.
A441662 2010334-
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
A441663 2022563-
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A921613 2038151-
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A921612 2038151-
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A001684 2037949-
This technical bulletin provides instructions for an an error message and updating with an SVM code.
A911682 2045580-
This bulletin provides information regarding a data connection message dur to the SIM card for T - Mobile subscribers.
80B8 - Dealer le
The coolant shut-off valve N82 may sporadically stick. If this happens, the heating output of the air conditioner will be reduced.
A371669202930512
THIS BULLETIN PROVIDES UPDATED SOFTWARE FOR THE TRANSMISSION CONTROL MODULE WHEN A CUSTOMER REPORTS HARSH DOWNSHIFTS WHILE BRAKING.
A46166020351136
THIS TECHNICAL BULLETIN PROVIDES SERVICE INFORMATION FOR A RATTLING NOISES ON UNEVEN ROADS FROM THE FRONT AXLE.
A37166820300075
THIS BULLETIN PROVIDE INSTRUCTIONS FOR WHEN THERE ARE HARSH GEAR SHIFTS BUT THERE IS NO FAULTS STORED AND YOU CAN DUPLICATE THE CONCERN.
A91167020394767
THIS BULLETIN IS HARDWARE UPDATE FOR VEHICLES THAT CAN NO LONGER RECEIVE 2G SERVICE FROM T MOBILE
SM 76-2016
THIS SPECIAL NOTICE IS TO INFORM DEALERS TO RETURN ALL 07P-121-115-C /07P-198-210 AND ONLY ORDER PART NUMBER07P-121-115-E / 07P-198-210-A GOING FORWARD.
ATU 8/2016
RUNNING GEAR: AUDI MAGNETIC RIDE - KNOCKING NOISES FROM REAR SHOCKS ON S3 (8V) AND TTS (FV)
A911667 2030465-
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING TIPS FOR VARIOUS ISSUES WITH THE MMI3G+ FUNCTIONALITY.
A911667203046510
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING TIPS FOR VARIOUS ISSUES WITH THE MMI3G+ FUNCTIONALITY.
A40165520243184
THIS TECHNICAL SERVICE BULLETIN PROVIDES INSTRUCTIONS FOR CORRECTING A CLICKING SOUND FROM THE WHEEL BEARING(S).
A91164720304658
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING TIPS FOR VARIOUS ISSUES WITH THE MMI3G+ FUNCTIONALITY.
A91164920304659
THIS TECHNICAL SERVICE BULLETIN PROVIDES TROUBLESHOOTING TIPS FOR VARIOUS ISSUES WITH THE MMI3G+ FUNCTIONALITY.
2012-3-17-2016
MODIFIED WIPER BLADE CHECK FOR US: WIPER BLADES CHECK CONDITION AND REPLACE IF NECESSARY (USA ONLY) ADDED WIPER BLADE CHECK FOR CAN: WIPER BLADES CHECK CONDITION (CANADA ONLY)
A96160720295633
THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE.
A01166420442301
THIS TECHNICAL SERVICE BULLETIN PROVIDES A SOFTWARE CODE TO CORRECT AN ISSUE THAT CAUSES A CATALYST SYSTEM-RELATED DTC.
A96160620295632
THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE.
A91163920420133
THIS TECHNICAL SERVICE BULLETIN EXPLAINS HOW TO DIAGNOSE AND RESOLVE ISSUES WITH AUDI CONNECT ONLINE DESTINATION SEARCH, GOOGLE EARTH NAVIGATION VIEW, AND INRIX ONLINE TRAFFIC.
A011656 2040491-
The technical service bulletin is in regards to the MIL being on due to DTC P1B1C00 (coolant pump mechanical malfunction) being stored in the ECM. "Coolant System: Fault Turn Off Engine" and the Coolant symbol appear in the information panel. Condition can be caused by a defective thermostat or the diagnostic software is incorrectly displaying the warning.
A011655 2035002-
This technical service bulletin is about the MIL being on due to DTCs being stored in the ECM. The DTCs may appear during monitoring of the secondary air system during the engine cold starting phase. The secondary air pressure can be influenced by several factors; which may include a leak in the vacuum system.
A481668 2043629-
Steering angle sensor cannot be programmed. The steering angle sensors cannot be calibrated and the steering end stops cannot be adapted on a vehicle with dynamic steering.
A191668 2042328-
The red coolant light is illuminated , indicating that the coolant temperature is too high or that the coolant level is too low. The engine speed governing light is illuminated with the message " Engine speed maximum XXXX rpm". To prevent the engine from overheating, the engine speed is automatically limited to the displayed maximum. DTCs are stored in the ECM due to the problem. Tolerances of opening spring in thermostat cause the condition.
A911631 2039476-
The customer complains that the Audi connect online service in their 2011-2013 A8, 2012-2013 Q7, or 2013 A4, A5, A5 cabriolet, or Q5 vehicle only reaches 2G service. The customer has received a letter from T-Mobile and/or Audi of America regarding the issue. The VIN on the letter matches the VIN on the vehicle that is being serviced. The vehicle can be within or outside of the New Vehicle Limited Warranty. A telephone module that supports 3G service on the 1900MHZ band was installed beginning with model year 2014 vehicles. No repairs are necessary for model year 2014 vehicles and later. Video shows the service procedure.
A661546 2030471-
Supersedes Technical Service Bulletin Group 66 number 13-30 dated June 4, 2013. Customer may report that the license plate attachment screws do not install properly. License plate mounting bracket threaded inserts stripped.
A011653 2027732-
The MIL is on due to DTC P045600 (very small EVAP leak) being stored in the ECM. No leaks were found in the EVAP system. Software update needed.
A961604 2042811-
Audi connect Gen1 and Gen2 systems: Differences and troubleshooting. The customer has a general concern related to Audi connect. Different features are included with different generations of the Audi connect system. The Audi connect Gen1 system includes all vehicles that utilize a removable plastic SIM card. The Audi connect Gen2 system includes all vehicles that utilize an embedded SIM card. The root cause of all complaints cannot be attributed to the vehicle hardware because of the backend server configurations that need to be correct in order for Audi connect to work. For most sporadic complaints, the issue typically resides with the MBB backend server or with the source data provider (Google, INRIX, etc.), and not with the vehicle. In rare cases, the mobile network operator (AT&T, T-Mobile) can be the cause of the complaint. For most static complaints, the issue can be attributed to the user account subscription or possibly the vehicle hardware.
A191666 2043142-
The MIL is sporadically on. One or more of the following DTCs is stored in the engine control module (ECM, J623 (address word 01). They are DTC P261A00 (Coolant Pump ?B? Control Circuit/Open), DTC P261B00 (Coolant Pump ?B? Control Circuit Range/Performance), and DTC P261C00 (Coolant Pump ?B? Control Circuit Low). The continued coolant circulation pump sporadically fails.
Elsa Newsletter
TSBs in this newsletters include the MIL on due to DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) being stored in the ECM. New ECM software implemented to correct the condition.
A011649 2041120-
The MIL is on due to DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) being stored in the engine control module (ECM), J623 (address word 01). The diagnostic limitations were too narrow. New ECM software implemented to correct the condition.
A401549 2018194-
Supersedes Technical Service Bulletin Group 40 number 14-41 dated July 2, 2014. Oil appears on one or several shock absorbers. Oil may appear on a shock absorber As a result of a leak because the shock absorber is damaged. Oil may appear on a shock absorber As a result of residue from when the shock was filled during production, or as a result of slight condensation in the seal area. This small amount of oil is for lubrication and it reduces wear on the seal.
A911529 2013422-
Supersedes Technical Service Bulletin Group 91 number 13-04 dated September 11, 2013. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
A001578 2021205-
Supersedes Technical Service Bulletin Group 00 number 10-05 dated June 14, 2010. VIN plate and/or B-Pillar Safety Certification label requires replacement.
A171568 2028440-
Supersedes Technical Service Bulletin Group 17 number 14-49 dated April 3, 2014. When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
A201559 2011703-
Supersedes Technical Service Bulletin Group 20 number 13-29 dated November 15, 2013. The fuel tank has been removed from the vehicle and must be neutralized before shipment or disposal. When the fuel tank in a vehicle is replaced, the original tank must be properly flushed to neutralize the remaining gasoline or diesel fuel.
A911526 2042097-
The traffic feature in the MMI navigation is inoperative. If the vehicle is a model year 2016 A6 or A7, see TSB 2042013: 91 Audi connect online destination search, Google Earth navigation view, or INRIX online traffic is not available. There is a known server issue that can only be resolved through a change to the Audi AG backend server. Audi has changed traffic providers over the years as new technologies have developed. This bulletin provides an overview of the different systems and the basic checks that can be performed to diagnose complaints related to traffic in the MMI navigation system.
A401548 2042603-
When the vehicle is driven between 35 mph and 75 mph, a noise can be heard in the front of the vehicle. The customer may say that the noise is coming from the steering column area, and may describe the sound as buzzing, humming, whistling, whining, grinding, howling, and/or droning. The best way to understand the complaint is to discuss it with the customer. Faulty wheel bearing(s) may cause the noise.
A911524 2026611-
Supersedes Technical Service Bulletin Group 91 number 12-46 dated July 10, 2012. This Technical Bulletin provides an overview of HD Radio technology and terminology. The
A911528 2042013-
Supersedes Technical Service Bulletin Group 91 number 15-17 dated September 29, 2015. While using Audi connect, the customer cannot access the online destination search and/or the Google Earth navigation view. The following message appears in the MMI: ?This service is currently unavailable. Please try again later.? The customer may also see an error message in the myAudi portal indicating that one or multiple licenses are expired and must be renewed. Additionally, if the vehicle is a model year 2016 A6, A7, or TT, the customer may not be able to see speed and flow traffic information in the navigation map screen, and may consistently see that no traffic reports are available. For these vehicles, traffic is provided by INRIX online.
A191563 2042328-
The red coolant light is illuminated, indicating that the coolant temperature is too high or that the coolant level is too low. The engine speed governing light is illuminated with the message ?Engine speed maximum XXXX rpm?. To prevent the engine from overheating, the engine speed is automatically limited to the displayed maximum. DTCs are stored in the ECM. Tolerances of opening spring in thermostat cause the condition.
A201554 2035073-
Supersedes Technical Service Bulletin Group 20 number 15-52 dated October 28, 2015. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
A201552 2035073-
Supersedes Technical Service Bulletin Group 20 number 15-48 dated October 15, 2015. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
A511510 2009967-
Supersedes Technical Service Bulletin Group 51 number 15-09 dated October 2, 2015. Instructions for vehicle inspection, protection removal, and detailing.
A011547 2035002-
Supersedes Technical Service Bulletin Group 01 number 15-46 dated October 8, 2015. The Mil is on. DTCs are stored in the ECM. The DTCs may appear during monitoring of the secondary air system during the engine cold starting phase. With the electric solenoid valves controlled, a diagnosis cycle is performed and the secondary air pressure is measured for a specified value. The secondary air pressure can be influenced by several factors; which may include a leak in the vacuum system.
A461525 2022584-
Supersedes Technical Service Bulletin Group 46 number 14-86 dated July 14, 2014. DO NOT use this TSB if there is another TSB for same concern applicable to the VIN. This TSB is only intended for diagnostic purposes and does not serve as a guideline for determining warrantable conditions. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. driving style, environmental conditions, and service history of the vehicle. Additionally, as brake pads and discs wear, their dampening ability is reduced. Disc thickness variation (DTV) is a common condition that contributes to brake pulsation. DTV occurs when the two braking surfaces of the brake disc are no longer parallel to each other. This condition cannot be accurately measured with normal workshop tools.
A911521 2039476-
Supersedes Technical Service Bulletin Group 91 number 15-06 dated July 28, 2015. The customer complains that the Audi connect online service in their 2011-2013 A8, 2012-2013 Q7, or 2013 A4, A5, A5 cabriolet, or Q5 vehicle only reaches 2G service. This bulletin applies only to model year 2011-2013 A8, 2012-2013 Q7, and 2013 A4, A5, A5 cabriolet, and 2013 Q5 vehicles. For 2012-2013 A6 and A7 vehicles see TSB 2039515. This bulletin does not apply to model year 2014 and newer. Starting with model year 2014, the new telephone module was installed in production. The model year 2014 A8 is not included in this repair. Model year 2014 was the last year before the A8 product improvement and ElsaPro may classify these vehicles as model year 2013 because these vehicles are the same from a technical and design standpoint. But unlike the model year 2013 vehicles, the model year 14 vehicles already have the updated telephone module in the MMI. Recently, T-Mobile (the service provider for Audi connect) has repurposed some of the GSM spectrum (3G on 2100Mhz band) to maximize 4G LTE coverage in certain metropolitan areas. Devices that do not support 3G service on the 1900MHZ band (including MMI main units of the vehicles to which this bulletin applies) will only receive 2G service when the switch is completed. The change currently only affects the markets listed above, but will affect other markets in coming years. This bulletin will be updated to include these markets as changes occur.
A201548 2035073-
Supersedes Technical Service Bulletin Group 20 number 15-46 dated May 15, 2015. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
A701548 2038029-
Supersedes Technical Service Bulletin Group 70 number 15-47 dated September 21, 2015. Various squeaks and/or rattles are heard from the roof area on vehicles equipped with a panoramic sunroof. These noises can be created by the points of contact between the sunroof cover trim frame and the clips that retain it to the headliner.
A461523 2034181-
Supersedes Technical Service Bulletin Group 46 number 15-02 dated February 9, 2015. The customer may report hearing brake noise from front or rear brakes. The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking. DO NOT use this TSB if there is another brake noise TSB applicable to the VIN. For additional information, refer to the Audi Brake systems brochure. Brake noise can be attributed to many causes. Brake discs or brake pads are close to or below their wear limit. New brake pads and/or discs have not been properly imbedded after installation. Aftermarket pads or discs are installed. There is debris (such as small stones, grit, road salt, or sand) between brake disc and brake pad. Discs are covered with rust. Rust can form when the vehicle has not been driven for a long period of time. Discs are grooved. There is chemical contamination on the braking surface of the brake disc due to wheel or tire cleaner being sprayed directly onto the brake disc. There are ?pad marks? on the brake disc as a result of brake pad material transferring to the discs. Pad marks can occur when a vehicle has been parked for long periods of time in a wet or snowy environment.
A011546 2035002-
Supersedes Technical Service Bulletin Group 01 number 13-25 dated August 23, 2013. The MIL is on. DTCs are stored in the ECM. The DTCs may appear during monitoring of the secondary air system during the engine cold starting phase. With the electric solenoid valves controlled, a diagnosis cycle is performed and the secondary air pressure is measured for a specified value. The secondary air pressure can be influenced by several factors; which may include a leak in the vacuum system or a faulty exhaust catalyst.
A441557 2022563-
Supersedes Technical Service Bulletin Group 44 number 14-56 dated December 8, 2014. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. Customer feels the vibration while driving at highway speeds from 55 ? 80 mph (88 ? 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid. Tires with higher mileage and/or wear should be inspected to determine the best correction for the issue (repair or replacement). Tire life and condition should be determined prior to starting any diagnosis or repair for a vibration.
A511509 2009967-
Supersedes Technical Service Bulletin Group 51 number 13-07 dated September 30, 2013. Instructions for vehicle inspection, protection removal, and detailing.
Scheduled Maint
This document contains the scheduled maintenance intervals. The first scheduled service is due at 5,000 miles (8,000 km) or 1 year after delivery, whichever occurs first. Thereafter, all remaining scheduled services are due every 10,000 miles or 1 year after previous service, whichever occurs first.
A911517 2042013-
While using Audi connect, the customer cannot access the online destination search and/or the Google Earth navigation view. ?This service is currently unavailable. Please try again later" message appears in the MMI. The customer may also see an error message in the myAudi portal indicating that one or multiple licenses are expired and must be renewed. Replacing the SIM card or MMI hardware or performing the SVM recovery activation will not remedy the concern.
A871570 2041717-
Supersedes Technical Service Bulletin Group 87 number 15-67 dated August 19, 2015. This bulletin applies to any repair that requires replacement of the air conditioning compressor. Any replacement of A/C compressors?regardless of the reason for failure?must include an ODIS GFF cooling performance test plan of the A/C system with documentation of the recovered refrigerant volume. This GFF test plan requirement is mandatory without exception.
A701547 2038029-
Supersedes Technical Service Bulletin Group 70 number 15-44 dated February 25, 2015. Various squeaks and/or rattles are heard from the roof area on vehicles equipped with a panoramic sunroof. These noises can be created by the points of contact between the sunroof cover trim frame and the clips that retain it to the headliner.
A961501 2019260-
Supersedes Technical Service Bulletin Group 96 number 13-67 dated July 10, 2013. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer?s door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 model years 2005?2006 and A3 model year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer?s HomeLink® opener system is using an alternate code. The handheld transmitter?s programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
Email Mandatory
This document contains the important email to all Audi dealership personnel in regards to the immediate madatory stop-sale order that is in effect to all vehicles from 20110-2015 that have a 2.0L TDI engine.
A171565 2038129-
Supersedes Technical Service Bulletin Group 17 number 15-63 dated June 2, 2015. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
A191562 2025303-
Supersedes Technical Service Bulletin Group 19 number 15-61 dated July 7, 2015. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
A9615002027416-6
Supersedes Technical Service Bulletin Group 96 number 14-85 dated July 24, 2014. The sunglass holder in the dome light assembly will not latch closed or is stuck closed. The condition may be intermittent. The sunglass holder spring latch mechanism may have been damaged during the assembly procedure.
A871569 2020124-
Supersedes Technical Service Bulletin Group 87 number 14-49 dated April 25, 2014. Air conditioning is inoperative. The HVAC blower functions normally. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Q5 vehicles. The A6 and A8 are not affected by this type of failure. The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged. Sensor G395 is a LIN slave of the vehicle electrical system control module. The vehicle electrical system control module transfers the information provided by the sensor via the comfort data bus to the climate control module, J255.
A871567 2041717-
Customer may report poor performance of A/C system or that the A/C system is inoperative. Any replacement of A/C compressors must include an ODIS GFF test plan confirming a malfunction of the A/C system with documentation of the recovered refrigerant volume.
A571513 2027406-
Supersedes Technical Service Bulletin Group 57 number 11-54 dated August 18, 2011. Audi advanced key (keyless entry) is inoperative on all doors, but the engine can be started with the keyless starting system (keyless go). The keyless starting system (keyless go) is a standard feature; Audi advanced key is an optional feature. All vehicles have an engine start-stop button (-E408-) and touch sensor surface on the outer door handles, but this does not mean that the optional Audi advanced key function is installed.
A571512 2028207-
Supersedes Technical Service Bulletin Group 57 number 12-62 dated January 9, 2012. The trunk cannot be unlocked with the button on the remote, with the button in the driver?s door panel, or with the handle on the lid of the trunk. Vehicles have a ?VALET? button in the glove box that activates the valet parking feature, which prevents unauthorized access to the trunk. When the valet parking feature is activated, the trunk can only be opened mechanically with the key.
A721515 2041579-
One side of the front center armrest will not lay flat or even with the other side. The pin from the locking pawl is out of place.
A0115372027732-1
Supersedes Technical Service Bulletin Group 01 number 14-68 dated March 5, 2014. The MIL is on. DTC P045600 (very small EVAP leak) stored in engine control module. No leaks found in the EVAP system. Software update needed.
A0115362041120-2
Supersedes Technical Service Bulletin Group 01 number 15-26 dated June 30, 2015. The MIL is on. DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) is stored in the engine control module (ECM). The diagnostic limitations were too narrow.
A911506 2039476-
The customer complains that the Audi connect online service in their 2011-2013 A8, 2012-2013 Q7, or 2013 A4, A5, A5 cabriolet, or Q5 vehicle only reaches 2G service when in metropolitan areas. This bulletin applies only to model year 2011-2013 A8, 2012-2013 Q7, and 2013 A4, A5, A5 cabriolet, and 2013 Q5 vehicles. For 2012-2013 A6 and A7 vehicles see TSB 2039515. The model year 2014 A8 is not included in this repair. Model year 2014 was the last year before the A8 product improvement and ElsaPro may classify these vehicles as model year 2013 because these vehicles are the same from a technical and design standpoint. But unlike the model year 2013 vehicles, the model year 14 vehicles already have the updated telephone module in the MMI. Recently, T-Mobile (the service provider for Audi connect) has repurposed some of the GSM spectrum (3G on 2100Mhz band) to maximize 4G LTE coverage in certain metropolitan areas. Devices that do not support 3G service on the 1900MHZ band (including MMI main units of the vehicles to which this bulletin applies) will only receive 2G service when the switch is completed. The change currently only affects the markets listed above, but will affect other markets in coming years. This bulletin will be updated to include these markets as changes occur.
PRI-A
AUDI: ALL AUDI 2011-2012 MODEL YEAR WITH AN 2.0 TFSI ENGINE WILL BE EXTENDING THE WARRANTY ON ALL FUEL INJECTORS. 7/23/15 *TA
USA B
AUDI: SOME 2011-2012 AUDI VEHICLES WITH 2.0 TFSI ENGINES WILL HAVE THE WARRANTY EXTENDED FOR INTAKE MANIFOLD AND FUEL INJECTORS. 7/23/15 *TA
A0115312033806-7
Supersedes Technical Service Bulletin Group 80 number 14-07 dated August 11, 2014. The MIL is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults may be stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss as a result of coolant migration in the electrical harness, faults in 08-Heating and Air Conditioning Electronics that result from coolant migration in the electrical harness, or a faulty N82 control valve.
TSB-01-15-31
AUDI: SOME VEHICLES WILL EXPERIENCE WARNING COOLANT LEVEL IS ON, ELEVATION OF ENGINE TEMPERATURE, AN ACTIVE LIMP HOME MODE DUE TO PERFORMANCE OF CLIMATE SYSTEM HEATING IS INSUFFICIENT DUE LOSS OF COOLANT RESULTING IN COOLANT MIGRATION OF ELECTRICAL HARNESS AND AIR CONDITIONING ELECTRONICS. MODEL 2010-14 A6, 7, 8, 4, 5, A5 CABRIOLET, TT, Q5, 7. *PE
A1915612025303-5
Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
A301519 2019850-
Supersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.
SB-01-15-29
AUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
A011526 2041120-
The MIL is on. DTC P042000 and/or P043000 (Catalyst system Bank 1/2, Efficiency below threshold) is stored in the engine control module (ECM), J623 (address word 01). The diagnostic limitations were too narrow.
A911501 2039476-
Supersedes Technical Service Bulletin Group 91 number 15-86 dated May 15, 2015. The customer complains that the Audi connect Online service in their 2011-2013 A8, 2012-2013 Q7, or 2013 A4, A5, A5 cabriolet, or Q5 vehicle only reaches 2G service when in metropolitan areas. This bulletin applies only to model year 2011-2013 A8, 2012-2013 Q7, and 2013 A4, A5, A5 cabriolet, and 2013 Q5 vehicles. For 2012-2013 A6 and A7 vehicles see TSB 2039515.
A911598 2018187-
Supersedes Technical Service Bulletin Group 91 number 14-50 dated July 10, 2014. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
A871564 2010146-
Supersedes Technical Service Bulletin Group 87 number 15-63 dated May 18, 2015. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor.
A911594 2036576-
Supersedes Technical Service Bulletin Group 91 number 14-28 dated March 6, 2014. MMI freezes or crashes and restarts when telephone address book is searched. This condition occurs because special characters (including symbols, emoticons, or map icons) are stored in the name field of a phonebook contact.
A911595 2040926-
The navigation map update database 8R0051884CJ cannot be activated using Software Version Management.
Executive Servic
This document contains a fluid capacity chart as well as a chart that contains the parts and part numbers needed for service.
A011524 2040491-
The MIL is on. "Coolant System: Fault Turn Off Engine" and the coolant symbol appears in the information panel. DTC P1B1C00 is stored in the ECM.
A901555 2030193-
Supersedes Technical Service Bulletin Group 90 number 12-31 dated July 16, 2012. Customer states all or part of the picture generated from the top view camera system has an unnatural hue. To achieve a natural-looking top view camera image, the camera system constantly adjusts the displayed colors based on environmental conditions. In certain lighting conditions, the system responds to vibrant nearby colors (from the vehicle or other objects) by automatically adding a complementary color to rebalance toward white, which can lead to color deviations. For example, a red object can cause the system to add a green hue. The strength of the added color depends on the brightness of the object and the ambient light.
A171563 2038129-
Supersedes Technical Service Bulletin Group 17 number 14-53 dated November 7, 2014. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
A971548 2013504-
Supersedes Technical Service Bulletin Group 97 number 10-15 dated October 20, 2010. Sporadic fault memory entries are stored in various control modules. Contacts may be widened (over 0.63 mm) if incorrect pins or incorrect methods for current flow tests are used. Either action may cause intermittent electrical connections, which can cause sporadic DTCs to be stored in various control modules.
A941567 2027773-
Supersedes Technical Service Bulletin Group 94 number 12-96 dated November 1, 2012. Part or all of the daytime running lights do not work on vehicles equipped with LED daytime running lights. For vehicles with halogen daytime running lights, refer to TSB 2017488: 94 Halogen Daytime running lights do not work. In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated control module. This TSB is for servicing information only.
A551537 2031273-
Supersedes Technical Service Bulletin Group 55 number 14-34 dated March 21, 2014. The movement-activated rear lid opening (also known as "Hands-free trunk release") is sporadically inoperative. This feature is installed on the A6/A7 from CW 22/2013 production and the A8 from CW 45/2011 production with Audi advanced key (PR No. 4I3).
A911588 2026390-
When a phonebook with a large number of contacts is being downloaded, the MMI screen freezes Briefly after the initial Bluetooth connection (shortly after the phone is bonded to the vehicle), after the ignition is switched on (shortly after the phone automatically reconnects with the vehicle), and after the phonebook has downloaded. When the voice recognition system is used, a message appears in the MMI screen stating that the phone book is too large and that the voice recognition system cannot be used. When music is streamed to the MMI system with the Bluetooth A2DP connection, the music intermittently pauses or seems to skip. The condition goes away once the phonebook transfer is completed. The MMI uses a limited portion of the total memory to convert the name and phone number fields of downloaded contacts into a voice command (text to speech). Extensive processing takes place if too many letters are used in the first and last name fields or if numbers or special characters are entered. The remaining memory is dynamically assigned to different applications which can also affect the capacity of the voice command processing. The MMI does not respond until the process is completed or it may freeze if phonebook fields are too large or do not follow typical formatting. In addition, the text-to-speech capacity is exceeded and the voice recognition system is rendered inactive.
A871563 2010146-
Supersedes Technical Service Bulletin Group 87 number 14-54 dated August 28, 2014. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
A201546 2035073-
Supersedes Technical Service Bulletin Group 20 number 15-45 dated May 6, 2015. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
A911586 2039476-
Supersedes Technical Service Bulletin Group 91 number 15-76 dated March 3, 2015. The customer complains that the Audi Connect Online service in their 2011-2013 A8, 2012-2013 Q7, or 2013 A4, A5, A5 cabriolet, or Q5 vehicle only reaches 2G service when some metropolitan areas. This bulletin applies only to model year 2011-2013 A8, 2012-2013 Q7, and 2013 A4, A5, A5 cabriolet, and Q5 vehicles. For 2012-2013 A6 and A7 vehicles, see TSB 2039515. Recently, T-Mobile (the service provider for Audi Connect) has repurposed some of the GSM spectrum (3G on 2100Mhz band) to maximize 4G LTE coverage in the Indianapolis metropolitan area. Devices that do not support 3G service on the 1900MHZ band (including MMI main units of the vehicles to which this bulletin applies) will only receive 2G service when the switch is completed. The change currently only affects the markets listed above, but will affect other markets in coming years. This bulletin will be updated to include these markets as changes occur.
A911583 2030465-
Supersedes Technical Service Bulletin Group 91 number 13-07 dated September 12, 2013. Group "A" complaints: Valid for vehicles with MMI software below version 566. Group "B" complaints: Valid for vehicles with MMI software at or above version 566 but below 715. Group "C" complaints: Valid for vehicles with MMI software at or above version 715 but not including 814. This bulletin only applies to vehicles with MMI3G+ Navigation (PR Number "7T6") and to vehicles with MMI3G+ Navigation, but without Audi Connect (PR Number "7T6" with additional PR code of "PND"). Continual improvements to MMI software provides solutions to issues experienced in the field.
A201545 2035073-
Supersedes Technical Service Bulletin Group 20 number 14-43 dated December 19, 2014. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
A921510 2038151-
Supersedes Technical Service Bulletin Group 92 number 14-09 dated September 12, 2014. The washer solvent level warning is on in the DIS, but the washer solvent level is correct. There is no functional restriction in the windshield washer system. The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank. The operation of the level sensor relies on the composition of the solvent to provide an accurate message on the solvent level. Incorrect concentration and the presence of additives can contaminate the sensor and reduce its sensitivity.
A391515 2028902-
Supersedes Technical Service Bulletin Group 39 number 14-14 dated May 5, 2014. A squealing, howling, or whistling noise may be heard coming from under the vehicle. The condition is typically noticed when the vehicle is cold (normally below freezing) and is moving at speeds of 5 - 60 mph. The noise is from the intermediate bearing of the propeller shaft.
A911582 2029903-
Supersedes Technical Service Bulletin Group 91 number 12-42 dated June 20, 2012. The customer complains about the picture quality of rearview backup camera image in the MMI screen. The picture is fuzzy or distorted. The picture looks too bright, too dark, or opaque in certain areas of the image. The colors of the objects in the image are incorrect or slightly off. The guidelines used for parking are fuzzy, distorted, or pixelated when compared with the guidelines displayed on another vehicle?s MMI.
A941565 2012749-
Supersedes Technical Service Bulletin Group 94 number 12-92 dated October 24, 2012. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens.
A941566 2017566-
Supersedes Technical Service Bulletin Group 94 number 13-12 dated March 29, 2013. The headlight switch knob was designed with a normal position and a pushed-in position. This feature was designed to avoid injuries during a collision.
A001573 2026692-
Supersedes Technical Service Bulletin Group 00 number 14-58 dated January 31, 2014. If a 2012 - 2016 Audi A8 L W12 arrives at an Audi dealership and requires diagnosis or repair, a Repair Authorization must be obtained. Prior to any repair, a Technical Assistance Center (TAC) ticket must be created for engine and transmission concerns only. Routine maintenance and PDI do not require prior authorization or a Technical Assistance Center (TAC) ticket. These procedures are mandatory until further notice.
Dealer Letter -
This document contains general information on the upcoming warranty extension on the high pressure fuel pump.
A661549 2030471-
Supersedes Technical Service Bulletin Group 66 number 15-46 dated February 19, 2015. Customer may report that the license plate attachment screws do not install properly. The license plate brackets are designed to be used with the appropriate-length screw installed by hand with a screwdriver. Damaged warranty parts have been returned to Audi of America with evidence of excessive torque used when installing the screw and/or excessive screw length.
A911579 2038824-
Supersedes Technical Service Bulletin Group 91 number 14-69 dated November 4, 2014. The following message appears on the MMI display: "Device or cable type not supported". The AMI cable being used is a genuine Audi-branded cable with an Audi part number (see Required Parts and Tools for a list of valid part numbers). The "Device or cable type not supported" message may be displayed when an incorrect AMI cable type is connected to the MMI system. Only cables with an Audi part number (i.e., 4F0.XXX.XXX) are supported by the MMI system. Volkswagen-branded cables look similar, but are not guaranteed to work with Audi MMI systems. The label on the end of an Audi-branded cable has an Audi logo and Audi part number. Audi-branded cables have unique firmware inside the hardware that can determine which MMI system and iOS device are connected to the cable. Volkswagen cables do not have this firmware. The firmware is required to allow the system to function normally due to the different technology available in the different MMI systems and in the different iPhones and iPod Touch devices. In addition, the AMI system was designed to play the music stored locally on the connected device only. Music streaming (from Spotify or Pandora, for example) is not supported, and music stored in the cloud (on Google Play, Amazon Prime, or iTunes Match/iCloud, for example) may drop out, pause, and skip when played.
A911580 2036575-
Supersedes Technical Service Bulletin Group 91 number 14-27 dated March 4, 2014. The addresses and contacts stored in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus disappear intermittently. Intermittently, the MMI system does not appear to remember that the user's myAudi PIN has already been entered, and it requires the user to enter the PIN again. The voice recognition system does not easily recognize commands spoken by the driver. This condition can be consistent or intermittent. Multiple voice recognition training sessions can be stored in the MMI for different users when different phones are Bluetooth-paired during each training session. If no phone is paired, the training session will be stored under a default profile. This profile will be used each time the voice recognition system is used without a phone being paired to the MMI. This TSB is informational only and not applicable to any Audi warranty.
A101511 2018288-
Supersedes Technical Service Bulletin Group 10 number 13-10 dated September 5, 2013. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these metal debris pieces are not removed prior to the installation and operation of the replacement engine, they could be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
A461507 2035113-
Customer may report hearing rattling noises from front axle when vehicle is driven on uneven roads. There are conflicting tolerances in the alignment of pin and hole on the front brake discs on specific models with a specific front brake PR code.
A911578 2011500-
Supersedes Technical Service Bulletin Group 91 number 08-129 dated November 12, 2008. Customer states that the reception of satellite radio occasionally fades or drops out. The information display may show a message related to the satellite radio, such as "Linking", "Updating", "Acquiring Signal", "Loading", "No Signal", or "No Sat".
A011514 2014753-
Supersedes Technical Service Bulletin Group 01 number 13-09 dated June 21, 2013. The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in excessive accumulation of deposits on intake valves, intake manifold, fuel injectors, and combustion chambers, engine running rough after cold start, excessive engine cranking time, hesitations while driving, rough engine idle, Reduced engine performance, and/or Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire, lean fuel system, or air/fuel ratio imbalance in the engine control module. Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
A011513 2030580-
Supersedes Technical Service Bulletin Group 01 number 15-08 dated February 17, 2015. The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTCs P15700 and/or P170100 may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
A171557 2010043-
Supersedes Technical Service Bulletin Group 17 number 13-35 dated January 9, 2013. This bulletin lists engine oils that meet Audi oil quality standards (VW 501 01, 502 00, 505 00, 505 01, and 504 00/507 00).
A941564 2017806-
Supersedes Technical Service Bulletin Group 94 number 15-60 dated February 12, 2015. The light bulb warning light is displayed in the instrument cluster with the following message: "Vehicle lights: malfunction". DTCs are stored in the vehicle electrical system control module. Exterior lights are functioning properly.
A911576 2039476-
The customer complains that the Audi Connect Online service only reaches 2G service within the Indianapolis metropolitan area. This bulletin applies only to model year 2011-2013 A8, 2012-2013 Q7, and 2013 A4, A5, A5 cabriolet, and Q7 vehicles. For 2012-2013 A6 and A7 vehicles, see TSB 2039515. A telephone module that supports 3G service on the 1900MHZ band was installed beginning with model year 2014 vehicles.
A701544 2038029-
Supersedes Technical Service Bulletin Group 70 number 14-39 dated August 11, 2014. Various squeaks and/or rattles are heard from the roof area on vehicles equipped with a panoramic sunroof. These noises can be created by the points of contact between the sunroof cover trim frame and the clips that retain it to the headliner.
A261525 2036070-
Supersedes Technical Service Bulletin Group 26 number 14-21 dated February 3, 2014. Various noises, such as humming, vibration, and/or rattling are heard coming from under the vehicle or from near the center console area. The noises may appear when the vehicle is driven at highway speeds, during hard acceleration when RPMs are high, during deceleration from 40 mph, or during acceleration from a stop.
A461505 2038056-
Supersedes Technical Service Bulletin Group 46 number 14-94 dated August 11, 2014. The brake pad wear indicator comes on, but brake pad thickness is above the wear limit.
A011508 2030580-
Supersedes Technical Service Bulletin Group 01 number 15-06 dated January 16, 2015. The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTC P157000 and/or DTC P170100 present in the ECM and the transmission control module, respectively.
A011507 2028344-
Supersedes Technical Service Bulletin Group 01 number 13-69 dated February 14, 2013. Noises and inconsistent engine operation after cold start during the catalyst heating phase. The customer may misinterpret these symptoms as engine misfiring. This bulletin applies only to non-diesel engines.
A941560 2017806-
Supersedes Technical Service Bulletin Group 94 number 14-32 dated January 23, 2014. The light bulb warning light is displayed in the instrument cluster with the following message: "Vehicle lights: malfunction". DTCs are stored in the vehicle electrical system control module. Exterior lights are functioning properly.
A461502 2034181-
Supersedes Technical Service Bulletin Group 46 number 15-00 dated January 23, 2015. The customer may report hearing brake noise from front or rear brakes. The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
A461500 2034181-
The customer may report hearing brake noise from front or rear brakes. The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking. Brake noise can be attributed to many causes. Aftermarket pads or discs have been installed. There is debris (such as small stones, grit, road salt, or sand) between brake disc and brake pad. Discs are covered with rust. Rust can form when the vehicle has not been driven for a long period of time
A011506 2030580-
The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTCs may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
A461599 2034181-
The customer may report hearing brake noise from front or rear brakes. The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking. Brake noise can be attributed to many causes. Brake discs or brake pads are close to or below their wear limit. Aftermarket pads or discs have been installed. There is debris (such as small stones, grit, road salt, or sand) between brake disc and brake pad. Discs are covered with rust. Rust can form when the vehicle has not been driven for a long period of time.
A371553 2029305-
Harsh downshifts when braking or harsh 1-2 upshift under acceleration. Further transmission control module software calibration to improve shift concerns.
Edition117
Product quality is Announcing a new innovation in technical service bulletins: portable, easy to access videos
20 14 43 2035073
EVAP System Leak Detected NVLD very small leak
20144320350737
System Leak Detected.
2035073/7
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A201443 2035073-
Supersedes Technical Service Bulletin Group 20 number 14-41 dated October 9, 2014. MIL on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
A911472 2024323-
Supersedes Technical Service Bulletin Group 91 number 13-74 dated February 5, 2013. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
00147020392061
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
A001470 2039206-
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet. Audi of America has started to host its TSB videos outside of ElsaPro. Doing so provides higher-quality videos, more reliable access to the videos, and the ability to view the videos on different devices.
441456202256311
Steering wheel shimmy, vibration, and/or oscillation
A441456 2022563-
Supersedes Technical Service Bulletin Group 44 number 14-50 dated May 14, 2014. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. Customer feels the vibration while driving at highway speeds from 55 ? 80 mph (88 ? 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid.
A901451 2021151-
Supersedes Technical Service Bulletin Group 91 number 12-63 dated October 4, 2012. The customer may report flickering of the dash insert lighting, of the A/C control panel lighting, or of the inside light. The condition occurs when the accelerator is pressed while the vehicle is in P or N, or when the vehicle is shifted down when moving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off when the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly-increased voltage, causing the lights to flicker.
Accessories Oper
This is an advance notice for Audi of America employees. This notice contains information for the accessories operations technical bulletin.
145320390181
A small amount of dry or crusted coolant is seen on the coolant pump housing (Figure 1, Figure 2, and Figure 3). The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.
A191453 2039018-
A small amount of dry or crusted coolant is seen on the coolant pump housing. The coolant level warning is not on. A minor coolant leak is possible during the break-in phase of the coolant seal on the coolant pump. The dry coolant marks are normal.
Edition112
Technical bulletins and updates
A171453 2038129-
Supersedes Technical Service Bulletin Group 17 number 14-50 dated August 15, 2014. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
2038904/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A681415 2038904-
The 12V outlet compartment in the rear center console is disengaged, causing the compartment to come out or to not close into the console. The compartment was bumped or kicked while open, causing it to disengage.
A911469 2038824-
The following message appears on the MMI display: ?Device or cable type not supported?. The ?Device or cable type not supported? message may be displayed when the wrong AMI cable type is used. See the Service section of this bulletin for an overview of the AMI cables that support iOS devices.
Edition110
Technical bulletins and updates
A571404 2027368-
Supersedes Technical Service Bulletin Group 57 number 13-86 dated March 20, 2013. The exterior door handle touch sensors (Audi advanced key) are inoperative on one or several doors. The key blade can be used mechanically (driver door or trunk) or remote electrically (key remote buttons) to unlock and lock the vehicle.
44145520103346
Tightening wheel bolts
48146320282204
Steering wheel leather damage, all vehicles
A481463 2028220-
Supersedes Technical Service Bulletin Group 48 number 13-54 dated September 13, 2013. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
EDITION 108
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A871458 2035582-
Supersedes Technical Service Bulletin Group 87 number 13-46 dated October 21, 2013. The A/C Compressor has been diagnosed as faulty and will be replaced under warranty. When performing replacement of an A/C Compressor under warranty, the amount of refrigerant and oil recovered must be documented.
2038727/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A911466 2020399-
Supersedes Technical Service Bulletin Group 91 number 14-24 dated January 24, 2014. The Audi MMI system will not play audio files from an SD card. The MMI system does not recognize the audio files on the SD card. The MMI system reports that the audio files on the SD card are damaged. The audio files on the SD card will play on one Audi vehicle, but will not play on a different Audi vehicle. The vehicle is equipped with RNS-E, Concert Radio with SD card slot, MMI3G, MMI3G+, or MIB.
A911467 2021037-
Supersedes Technical Service Bulletin Group 91 number 13-85 dated May 29, 2013. The iPod or the USB memory stick is not recognized or the iPod is not charged when either unit is connected to the Audi music interface (AMI). MMI3G or a Symphony/Concert CAN radio system with separate AMI control unit in the glove box or armrest. MMI3G+ with integrated AMI in the MMI main unit.
A941456 2038727-
A headlight system warning may be illuminated in the instrument cluster. One or more LEDs in the low beam are inoperative on one side. Internal cooling fan is inoperative in one headlight. DRL inoperative on one side. LED turn signal inoperative in one headlight. Diagnosis of the concern indicates that the headlight is at fault. Connector in the headlight is not properly seated.
TSB-94-14-56
AUDI: INFORMATION REGARDING THE ILLUMINATION IN THE INSTRUMENT CLUSTER OF HEADLIGHT SYSTEM WARNING DUE TO INOPERATIVE INTERNAL COOLING FAN IN HEADLIGHT, ON ONE SIDE, DRL INOPERATIVE AND THE LOW BEAMS ON ONE SIDE IS INOPERATIVE. 2010-13 A8. *PE
149820381661
The programmed values for the misfire adaption are not automatically reset when the memory is deleted. The adaption must be reset after the engine is installed.
A011498 2038166-
The engine warning light is on after engine replacement. The engine is not running roughly. However, fault codes are stored in the engine control module (ECM). The fault codes occur at light load, between 8% and 14% accelerator pedal position. The programmed values for the misfire adaption are not automatically reset when the memory is deleted. The adaption must be reset after the engine is installed.
A441455 2010334-
Supersedes Technical Service Bulletin Group 44 number 13-46 dated December 9, 2013. Wheel bolt requires torque adjustment.
144120350736
The NVLD pressure switch may erroneously detect a very small leak.
A201441 2035073-
Supersedes Technical Service Bulletin Group 20 number 14-34 dated June 26, 2014. MIL on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
144020338362
Beginning with MY2009, the filler necks of various TDI clean diesel vehicles were equipped with a misfueling guard (Figure 1). The guard minimizes the likelihood that fuel other than ultra-low sulfur diesel will be put into the vehicle. The misfueling guard is designed to remain in a locked position when a nozzle with a diameter typically suited for non-diesel fuels (approximately 13/16?, or 20.6mm) is inserted, to prevent further insertion of the nozzle into the filler neck. A nozzle with a larger diameter typically suited for diesel fuel (approximately 15/16?, or 23.8mm) will unlock the misfueling guard when inserted, allowing the nozzle to be further inserted into the filler neck.
2033836/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A201440 2033836-
Supersedes Technical Service Bulletin Group 20 number 13-26 dated May 15, 2013. Customer states that the vehicle cannot be refueled due to difficulty inserting the fuel pump nozzle into the filler neck. Customer may also state that the flap is stuck in a locked position and it cannot be moved with fingers.
Edition106
Audi Elsa Newsletter
37 14 48 2030007
TAC must be contacted before any repairs are attempted. Specific information about the concern must be gathered (as described in the Service portion of this bulletin) before TAC is contacted. Customer may report harsh shift concerns, but the customer is unable to determine the shift point because there is no gear indicator in the cluster. The concern can be reproduced.
37144820300075
Customer may report harsh shift concerns; no faults are stored and concern is reproducible
A371448 2030007-
Supersedes Technical Service Bulletin Group 37 number 12-65 dated September 25, 2012. Customer may report harsh shift concerns, but the customer is unable to determine the shift point because there is no gear indicator in the cluster. The concern can be reproduced. No faults are stored. TAC must be contacted before any repairs are attempted. Specific information about the concern must be gathered (as described in the Service portion of this bulletin) before TAC is contacted.
A911463 2028190-
Supersedes Technical Service Bulletin Group 91 number 13-08 dated September 20, 2013. The customer would like to add a different navigation map database for countries outside of the USA or Canada. The customer would like to change the MMI system language to a different language that is not already supported by MMI. When a song is being played and the track information for that song contains foreign language characters, the driver information system (DIS) in the cluster correctly displays the characters, but the MMI display does not.
2029027/11
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
37 14 46 2025535
If the memory is read with guided fault finding (GFF) or if Immobilizer test plans are performed, the above DTC entries may be stored due to a communication error between the VAS tester and the TCM. (In particular, the issue happens with tester VAS 5051B).
37 14 47 2029027
Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. The DTCs are stored due to an issue with the transmission control module software.
371447202902711
Transmission warning message in cluster (DTC P060A00)
A371446 2025535-
Supersedes Technical Service Bulletin Group 37 number 14-41 dated August 1, 2014. There is no customer complaint with this concern. Transmission faults stored (DTC P1703 or U1111).
A371447 2029027-
Supersedes Technical Service Bulletin Group 37 number 14-42 dated August 1, 2014. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs are stored in the transmission control module (TCM).
A641436 2020552-
Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
Edition104
Audi Elsa Newsletter
1494203058010
The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
2030580/10
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011494 2030580-
Supersedes Technical Service Bulletin Group 01 number 14-77 dated May 21, 2014. The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTCs may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
A921409 2038151-
Supersedes Technical Service Bulletin Group 92 number 14-08 dated August 19, 2014. The washer solvent level warning is on in the DIS, but the washer solvent level is correct. There is no functional restriction in the windshield washer system. The sensitivity of the washer solvent level sensor (G33) can be affected by the type, concentration, and the presence of additives in the washer solvent currently in the tank. The operation of the level sensor relies on the composition of the solvent to provide an accurate message on the solvent level. Incorrect concentration and the presence of additives can contaminate the sensor and reduce its sensitivity.
2033032/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A911461 2033032-
Supersedes Technical Service Bulletin Group 91 number 13-76 dated February 22, 2013. Call quality using the hands-free function is poor. Additionally, voice-activated functions may be restricted. The driver sounds muffled. The voice of the driver is quiet. The driver?s voice is accompanied by background interference. Voice-activated commands are not recognized. Various malfunctions can result from the normal airflow out of the center instrument panel vents that are directed upward at the microphones in the roof module, and can limit microphone sensitivity.
149120288422
Customer vehicle is fitted with unauthorized ECM tuning.
A011491 2028842-
Customer vehicle is fitted with unauthorized ECM tuning. All systems on Audi vehicles are engineered to work together using the factory calibrations, which have been extensively tested and validated before the vehicle is released for sale. The Audi warranty coverage is based on the results of developing the vehicle under the factory calibration. If a vehicle is equipped with unauthorized hardware or software tuning, it can cause stress on vehicle components outside of intended design limits, and can cause damage and additional wear. Subsequently, factory powertrain warranty coverage is reduced or voided.
Edition102
Audi Elsa Newsletter
Edition101
Audi Elsa Newsletter
145220285743
This condition may be caused by a leak on the tee connector hose located in the coolant pipe, between alternator, coolant pipe, and oil cooler.
2028574/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
145020381291
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
2038056/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
46149420380561
Brake pad wear warning - pads not at minimum
2029027/10
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
37 14 41 2025535
If the memory is read with guided fault finding (GFF) or if Immobilizer test plans are performed, the above DTC entries may be stored due to a communication error between the VAS tester and the TCM. (In particular, the issue happens with tester VAS 5051B).
37 14 42 2029027
Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction.
37144120255353
Transmission faults stored (DTC P1703 or U1111)
371442202902710
Transmission warning message in cluster (DTC P060A00)
A001467 2002047-
Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
00146620379491
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
A001466 2037949-
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated. This DTC is normal. It indicates that the parameter data has not been properly programmed into the ECU by SVM.
Edition96
Technical bulletins and updates
Edition96-1
i-wire new wiring diagram application
2037934/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A641434 2037934-
Creaking noises can be heard from the A-pillar, dash panel, or windshield. The small lug on the centering pins of the windshield can cause the creaking noises.
96148520274165
Sunglass holder will not close
A961485 2027416-
Supersedes Technical Service Bulletin Group 96 number 13-61 dated May 28, 2013. The sunglass holder in the dome light assembly will not latch closed. The sunglass holder spring latch mechanism may have been damaged during the assembly procedure.
A461491 2034181-
Supersedes Technical Service Bulletin Group 46 number 14-76 dated March 25, 2014. The customer may report hearing brake noise from front or rear brakes. The customer may describe these noises as a squeal, squeak, grinding, groaning, thumping, or creaking.
2033355/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2037761/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
46148820377611
Engine cannot be switched off if ABS warning on
A461488 2037761-
Customer may report that the engine cannot be switched off with warnings on in the instrument cluster (e.g., ABS/ESP).
A911451 2033355-
Supersedes Technical Service Bulletin Group 91 number 13-78 dated March 15, 2013. Adaptive Cruise Control (ACC) does not work. The message "ACC and braking guard: unavailable at this time. No sensor vision" appears in the instrument cluster. DTC C110BF0 (Adaptive cruise control sensor restricted view) is logged in the distance regulation control module, J428 (address word 13).
001465201173210
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
A001465 2011732-
Supersedes Technical Service Bulletin Group 00 number 12-32 dated February 7, 2012. This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
2035113/4
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
46148620225845
Brake pulsation diagnostic guidelines
46148720351134
Rattling noises from front axle on uneven roads (brake disc)
A461486 2022584-
Brake-related vibration and pulsation has several causes that depend on driving style and resulting brake disc temperature, as well as environmental conditions. Both the intensity of the wear of the brake system and the type of wear depend on the operating conditions of the vehicle. The wear of the brake discs is determined by the frequency and intensity of the brake operations. Dirt build-up, exposure to sand, long standing times, and road salt or similar, can also promote wear as well as cause scoring marks on the brake discs. The driving style of the driver also influences the wear of the brake system. An overly-aggressive driving style, which results in frequent sharp braking, can lead to more wear (particularly of the brake pads). A gentle driving style can result in very light brake applications. If the brakes are always applied with little pressure, a rust film and other airborne particles may settle on the brake discs and pads. Firm brake operations can help clean off such build-up from the brakes.
A461487 2035113-
Supersedes Technical Service Bulletin Group 46 number 14-65 dated January 3, 2014. Customer may report hearing rattling noises from front axle when vehicle is driven on uneven roads.
Edition94
Pending service solutions and bulletins
A911450 2018187-
Supersedes Technical Service Bulletin Group 91 number 13-02 dated August 30, 2013. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
AUD4927ENG
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the State of Minnesota.
46148420311353
Yellow warning light for electric parking brake on, ACC inoperative once
A461484 2031135-
Supersedes Technical Service Bulletin Group 46 number 13-57 dated August 16, 2013. The yellow warning for electromechanical parking brake (EPB) appeared once in the instrument cluster. The warning turned off after the ignition was cycled, and there have not been additional occurrences. EPB function was not affected. The adaptive cruise control (ACC) was inoperative once, but it resumed proper operation after the ignition was cycled, and there have not been additional occurrences. DTCs are logged in the EPB control module.
4014402023187
Squeaking noises when steering or maneuvering
40144020231874
Squeaking noises when steering or maneuvering
4014412018194
Shock absorber leaks: assessment aid
40144120181946
Shock absorber leaks: assessment aid
A401440 2023187-
Supersedes Technical Service Bulletin Group 40 number 13-35 dated September 23, 2013. Squeaking noises are heard when the steering wheel is turned or maneuvered. The noises may be more prevalent in wet weather. The folds of the outer rubber boots on the front axle shafts may come in contact with each other when the steering wheel is turned, causing squeaking noises. These noises are more likely to occur when the vehicle is new. The volume and occurrence of the noise will dissipate after a short break-in period.
A401441 2018194-
Supersedes Technical Service Bulletin Group 40 number 13-34 dated September 23, 2013. Oil appears on one or several shock absorbers.
37 14 33 2029305
Further transmission control module (TCM), J217 (address word 02), software calibration to improve shift concerns.
37 14 34 2028985
Transmission warning may appear in instrument cluster. After ignition cycle, the warning message is no longer present. The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
371433202930510
Harsh downshifts when braking or harsh 1-2 upshift under acceleration
371434202898512
Transmission warning message in cluster.
A371433 2029305-
Supersedes Technical Service Bulletin Group 37 number 13-96 dated March 4, 2013. Customer may report harsh downshifts while braking or harsh 1-2 upshift under acceleration. Further transmission control module (TCM), J217 (address word 02), software calibration to improve shift concerns.
A371434 2028985-
Supersedes Technical Service Bulletin Group 37 number 14-22 dated May 1, 2014. Transmission warning may appear in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or ?Stuck Off? is stored in transmission control module (TCM). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
00146420355812
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
A001464 2035581-
Supersedes Technical Service Bulletin Group 00 number 13-55 dated October 21, 2013. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to a W12 engine, the increased oil flow rate forces oil into the intake manifold or combustion chamber and damages the engine.
Edition92
Idenifying and mixing factory fill engine coolants
143420350735
The NVLD pressure switch may erroneously detect a very small leak.
A201434 2035073-
Supersedes Technical Service Bulletin Group 20 number 14-32 dated March 21, 2014. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
A191450 2025303-
Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Edition90
Technical bulletins and updates
SM552014
Drive Unit
Edition89
ElsaPro Software update and technical bulletins
2035757/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A741420 2035757-
Supersedes Technical Service Bulletin Group 74 number 14-17 dated February 21, 2014. Customer may complain that the seat pneumatics (side bolsters and lumbar support) actuate without any input from the customer. This condition can occur when the vehicle is driven at high altitudes or when the outside temperature fluctuates. DTCs may be present in the front seat pneumatics control modules, J873 and J872 (address words 88 and 89) or in the rear seat pneumatics control modules (in certain A8 models only), J875 and J874 (address words 8A and 8D). No leak is present. There is a software issue in the seat pneumatics control modules that causes the seat pneumatics to automatically actuate in high altitudes (change in air pressure) or in fluctuating temperatures in order to maintain pressure.
37 13 07 2033658
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
00146320335762
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
37 14 30 2003658
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
37143020036586
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
A001463 2033576-
Supersedes Technical Service Bulletin Group 00 number 13-49 dated May 14, 2013. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
A371430 2003658-
Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
Edition87
Technical bulletins and updates
37 14 29 2029027
Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. The DTCs are stored due to an issue with the transmission control module software.
37142920290279
Transmission warning message in cluster.
A371429 2029027-
Supersedes Technical Service Bulletin Group 37 number 13-17 dated September 11, 2013. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs are stored in the transmission control module (TCM). If DFCCs do not match exactly, this TSB does not apply. The DTCs are stored due to an issue with the transmission control module software.
147720305809
The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition. Improved software for the comfort system central control module, J393 (address word 46) in production. Service software update will follow at a later date (to be determined).
2030580/9
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011477 2030580-
Supersedes Technical Service Bulletin Group 01 number 14-51 dated January 3, 2014. The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTCs may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
EDITION 86
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Edition86
Technical bulletins and updates
37 14 26 2025535
If the memory is read with guided fault finding (GFF) or if Immobilizer test plans are performed, the above DTC entries may be stored due to a communication error between the VAS tester and the TCM. (In particular, the issue happens with tester VAS 5051B).
37142620255352
Transmission faults stored (DTC P1703 or U1111)
A371426 2025535-
Supersedes Technical Service Bulletin Group 37 number 11-20 dated May 13, 2011. There is no customer complaint with this concern. DTCs may be stored. If the memory is read with guided fault finding (GFF) or if Immobilizer test plans are performed, the above DTC entries may be stored due to a communication error between the VAS tester and the TCM. (In particular, the issue happens with tester VAS 5051B).
441450202256310
Steering wheel shimmy, vibration, and/or oscillation
A441450 2022563-
Supersedes Technical Service Bulletin Group 44 number 14-49 dated April 17, 2014. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration while driving at highway speeds from 55 ? 80 mph (88 ? 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid. The vibrations felt by the customer could be a result of the harmonic vibrations caused by the radial force variation (RFV) of the tires or an imbalance of the wheel and tire assembly.
Update91i8
Google Maps Street View (NVLW))
2028561/7
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
37 14 25 2028561
New software in the gear shift control module addressed the condition. There is no customer complaint about the gearbox. The gear lever display flashes. The following message is shown: "gearbox problem, journey can be continued with restrictions". This is a generic message in the instrument cluster that a transmission fault has occurred and Limp Home Mode might be activated if the malfunction continues.
37142520285617
Gearbox warning light on.
39141420289023
Squealing, howling, or whistling noise from under vehicle when cold
A371425 2028561-
Supersedes Technical Service Bulletin Group 37 number 13-06 dated May 13, 2013. There is no customer complaint about the gearbox. The gear lever display flashes. The following message is shown: "gearbox problem, journey can be continued with restrictions". This is a generic message in the instrument cluster that a transmission fault has occurred and Limp Home Mode might be activated if the malfunction continues. DTCs are stored in the gear shift control module. New software in the gear shift control module addressed the condition.
A391414 2028902-
Supersedes Technical Service Bulletin Group 39 number 12-12 dated June 12, 2012. A squealing, howling, or whistling noise may be heard coming from under the vehicle. The condition is typically noticed when the vehicle is cold and is moving at speeds of 5 - 60 mph. The noise is from the intermediate bearing of the propeller shaft.
371422202898511
Transmission warning message in cluster (P074100 stored in TCM)
A371422 2028985-
Supersedes Technical Service Bulletin Group 37 number 13-01 dated April 24, 2013. Transmission warning may appear in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or ?Stuck Off? is stored in transmission control module (TCM), J217 (address word 03). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
27 14 24 2025360
Low battery charge: Diagnosis tips and TAC instructions
96148320340004
Lane Change Assistant sporadically inoperative
A271424 2025360-
Supersedes Technical Service Bulletin Group 27 number 12-12 dated February 28, 2012. Customer may report that the vehicle does not start due to a discharged battery. The vehicle has either a battery diagnostic management control module or a battery energy management control module. This TSB provides basic diagnosis steps for discharged batteries, general tips for working with batteries, and system verification steps to ensure that the vehicle is configured correctly.
A961483 2034000-
Supersedes Technical Service Bulletin Group 96 number 13-78 dated October 31, 2013. Audi side assist deactivates or is sporadically inoperative. Message "Side Assist Unavailable" is displayed in the driver information system display when the system deactivates. Audi side assist deactivates or is sporadically inoperative. DTCs are stored in the Lane change assistance control module. A software issue within J769 causes a diagnostic fault, which deactivates the Audi side assist temporarily.
TSB-96-14-83
AUDI: ON SOME VEHICLES, THE SIDE ASSIST WILL BE SPORADICALLY INOPERATIVE OR WILL DEACTIVATES ITSELF AND MESSAGE APPEARS SIDE ASSIST UNAVAILABLE. *PE
Edition83
97 no start
A871449 2020124-
Supersedes Technical Service Bulletin Group 87 number 13-44 dated August 26, 2013. Air conditioning is inoperative. The HVAC blower functions normally. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Q5 vehicles. The A6 and A8 are not affected by this type of failure.The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged.
2030903/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A901448 2030903-
Supersedes Technical Service Bulletin Group 90 number 12-35 dated October 1, 2012. Customer complains that when the vehicle is driven, various warning lights illuminate, sometimes with restricted functions in the electrical system. The complaint occurs with another complaint regarding the MMI 3G+ infotainment system. After an ignition cycle, the condition is gone and therefore, it may not be reproducible. Sporadic DTCs may be present for communication errors, restricted functions, or missing/incorrect messages.
A911438 2033780-
Supersedes Technical Service Bulletin Group 91 number 13-83 dated May 2, 2013. Apple® devices with the new 8-pin plug will not play videos using the Audi Music Interface. The current Apple devices have a new plug assignment: the 30-pin plug has been replaced with an 8-pin plug. The old plug used an analog video transmission, whereas the new plug uses a digital video transmission that is not supported by the Audi Music Interface.
2037052/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
44144920225639
Steering wheel shimmy, vibration, and/or oscillation
A441449 2022563-
Supersedes Technical Service Bulletin Group 44 number 13-44 dated November 21, 2013. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration while driving at highway speeds from 55 - 80 mph (88 - 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. If an applicable Repair Authorization is not followed, the claim will not be paid. The vibrations felt by the customer could be a result of the harmonic vibrations caused by the radial force variation (RFV) of the tires or an imbalance of the wheel and tire assembly. Tires with higher mileage and/or wear should be inspected to determine the best correction for the issue (repair or replacement). Tire life and condition should be determined prior to starting any diagnosis or repair for a vibration.
A851421 2037052-
There is no airflow from the outer vents. Noises may be heard from the side of the dash during operation. DTCs are stored in the air conditioning control module. The mechanical stop for vent linkage is broken, allowing for the linkage to extend past intended range of operation.
97144320367643
97 No start (DTC P068A00)
A971443 2036764-
Supersedes Technical Service Bulletin Group 97 number 14-42 dated March 31, 2014. The MIL is on. Vehicle will not start. DTC P068A00 is stored in the ECM. The motronic engine control module power supply relay, J271, is not functioning properly. Because the J271 relay controls battery voltage (Terminal 30) via a ground signal sent from the ECM, numerous faults can occur in multiple control modules when it is not functioning properly.
Edition81
Elsa newsletter
A911436 2027903-
Supersedes Technical Service Bulletin Group 91 number 12-55 dated August 13, 2012. The most recent calls are not shown in the call lists of the vehicle. Call lists are not shown. The phone book (Directory) in the vehicle is not updated. The phone book is not downloaded to the vehicle. Vehicles with MMI 3G+ are affected.
A911437 2030947-
Supersedes Technical Service Bulletin Group 91 number 13-92 dated July 16, 2013. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone receives the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call because it assumes that the phone is not responding.
2027718/7
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A911434 2027718-
Supersedes Technical Service Bulletin Group 91 number 14-20 dated January 3, 2014. When the driver uses the Bluetooth hands-free telephone system to make a call, the listener on the other end cannot clearly understand the driver. The driver's voice sounds muffled, as if it is being heard from under water. The microphone seal was damaged during installation into the roof module.
A911435 2026895-
Supersedes Technical Service Bulletin Group 91 number 14-19 dated January 3, 2014. Customer complains that during Bluetooth calls, the person at the other end has trouble hearing the speaker in the vehicle. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
144920284402
The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
2036688/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
46147820366881
Vehicle does not start, battery flat DTC stored (DTC U101100)
A171449 2028440-
Supersedes Technical Service Bulletin Group 17 number 12-26 dated January 20, 2012. When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. The displayed vehicle range drops inconsistently. After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
A461478 2036688-
Customer may report that the vehicle does not start due to a discharged battery. DTC U101100 (supply voltage too low) is stored in the gateway, J533 (address word 19), and/or the electronic parking brake (EPB) control module. According to the test plan "19-Read Data Bus Keep-Awake Manager", the EPB control module kept the data bus active for prolonged periods of time. The EPB switch appears to be permanently operating (applying or releasing the parking brake) due to an internal mechanical issue or because it is jammed or blocked by debris or by a foreign object.
Edition75
Technical bulletins and updates
97144220367642
97 No Styart (DTC P068A00)
A691428 2023323-
Supersedes Technical Service Bulletin Group 69 number 13-26 dated October 21, 2013. After the airbag control module (J234) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model's SVM code is provided in a parts bulletin (GP bulletin), which should have been referenced through ETKA when the module was replaced. The control module cannot be coded until the SVM code has been executed. If the SVM code was not acquired through the GP bulletin in ETKA, follow the instructions in the Service section of this bulletin to update the control module.
A971442 2036764-
Supersedes Technical Service Bulletin Group 97 number 14-41 dated March 18, 2014. The MIL is on. Vehicle will not start. DTC P068A00 is stored in the engine control module (ECM), J623 (address word 01). Numerous unrelated DTCs are also stored in the system, including: P056200, P057100, P068700, P068A00, P162400, P190C00, U010000, U010100, U012100, U014600, U015500, U021200, U101100, U102600, U111100, U111300, U140000, VAG00003, VAG00185, VAG00263, VAG00317, VAG00384, VAG00446, VAG00456, VAG00457, VAG00466, VAG00473, VAG00532, VAG00565, VAG00591, VAG00714, VAG00819, VAG00955, VAG01217, VAG01299, VAG01314, VAG01315, VAG01317, VAG01320, VAG01330, VAG01331, VAG01332, VAG01334, VAG01333, VAG01336, VAG01705, VAG01964, VAG02067, VAG02072, VAG02095, VAG02103, VAG02203, VAG02214, VAG02635, VAG02812, VAG02874, VAG03041, VAG03157, VAG03166, VAG03220, VAG03278, and/or VAG03531. The motronic engine control module power supply relay, J271, is not functioning properly. Because the J271 relay controls battery voltage (Terminal 30) via a ground signal sent from the ECM, numerous faults can occur in multiple control modules when it is not functioning properly.
Edition79
Technical bulletins and updates
143220350734
The NVLD pressure switch may erroneously detect a very small leak.
2031273/4
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A201432 2035073-
upersedes Technical Service Bulletin Group 20 number 14-31 dated January 9, 2014. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. The NVLD pressure switch may erroneously detect a very small leak.
A551434 2031273-
Supersedes Technical Service Bulletin Group 55 number 13-29 dated March 29, 2013. The movement-activated rear lid opening (also known as "Hands-free trunk release") is sporadically inoperative.
A911429 2026888-
Supersedes Technical Service Bulletin Group 91 number 12-50 dated August 1, 2012. Echo effects, caller on either end cannot hear conversation, sound distortion or feedback, and the sound is distorted, hisses, or scrapes occur during a phone call. This bulletin provides guidelines for analyzing the call quality of the Bluetooth system in the vehicle, and is not applicable to any Audi warranty.
A971441 2036764-
The MIL is on. Vehicle will not start. DTC P068A00 is stored in the engine control module (ECM), J623 (address word 01). Numerous unrelated DTCs are also stored in the system. The motronic engine control module power supply relay, J271, is not functioning properly. Because the J271 relay controls battery voltage (Terminal 30) via a ground signal sent from the ECM, numerous faults can occur in multiple control modules when it is not functioning properly.
Edition77
Technical bulletins and updates
147220366871
The ECM software needs to be updated. Additionally, the intake camshaft position sensors, G40 and G163, need to be replaced due to an internal electrical issue.
2036687/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
97144120367641
97 No start (DTC P068A00)
A011472 2036687-
The MIL is on. DTCs are stored in the ECM. The customer reports that the engine may sporadically run rough, but without significant loss of power or stalling. The ECM software needs to be updated. Additionally, the intake camshaft position sensors, G40 and G163, need to be replaced due to an internal electrical issue.
144820364771
The coolant pump is sealed with a slip ring seal to the input shaft. To prevent the seal from drying out, a minor coolant leak is necessary to keep the seal lubricated. Excess coolant from the minor leak is discharged through two leakage holes on the coolant pump. This minor leak is normal operation of the coolant pump, and it is not responsible for coolant loss. This discharged coolant may dry and encrust the coolant pump (Figure 3).
A191448 2036477-
The red coolant warning light may be on. The customer may complain that there is coolant loss. There is evidence of dried coolant from two leakage holes on the drive of the coolant pump. The coolant pump is sealed with a slip ring seal to the input shaft. To prevent the seal from drying out, a minor coolant leak is necessary to keep the seal lubricated. Excess coolant from the minor leak is discharged through two leakage holes on the coolant pump. This minor leak is normal operation of the coolant pump, and it is not responsible for coolant loss. This discharged coolant may dry and encrust the coolant pump.
A801406 2033806-
Supersedes Technical Service Bulletin Group 80 number 13-05 dated September 11, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. "Limp Home" mode is active. Faults are stored in the transmission control module (address word 02). Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss, or due to a faulty N82 control valve. Inspection of the coolant control valves N82, N509, or N488 reveals the presence of coolant inside the electrical connector as shown in the illustration. The connectors, wiring harness, and/or connected control units may have been damaged from exposure to coolant.
A911428 2036576-
Supersedes Technical Service Bulletin Group 91 number 14-26 dated February 24, 2014. The MMI screen goes blank then restarts or the MMI screen freezes for a few minutes then recovers when a phone is connected to the vehicle via Bluetooth when the user searches for a contact name in the MMI address book (by using the MMI control knob or the voice recognition system). This condition occurs because special characters (including symbols, emoticons, or map icons) are stored in the name field of a phonebook contact.
011468202773213
No leaks found in the EVAP system. Software update needed.
2027732/13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011468 2027732-
Supersedes Technical Service Bulletin Group 01 number 13-21 dated August 9, 2013. The MIL is on. DTC P045600 (very small EVAP leak) stored in engine control module (ECM), J623 (address word 01). No leaks found in the EVAP system. Software update needed.
A911427 2036575-
The addresses and contacts stored in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus disappear intermittently in vehicles with MMI3G+ Navigation, and in vehicles with or without Audi connect. Intermittently, the MMI system does not appear to remember that the user's myAudi PIN has already been entered, and it requires the user to enter the PIN again in vehicles with Audi connect. If a user stores addresses and contacts in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus while a Bluetooth phone is paired to the vehicle, those addresses and contacts will only be visible any time that the same phone is paired to the vehicle. Any time that the same phone is not paired to the vehicle, the addresses and contacts will not be available. If a user stores addresses and contacts in the Navigation >> Favorites, Navigation >> Directory, and Navigation >> Last destinations submenus while a Bluetooth phone is not paired to the vehicle, the addresses and contacts will be available any time. In vehicles with Audi connect, the user is prompted to enter the myAudi PIN when selecting online destinations or when importing contacts from the myAudi account. If the user?s Bluetooth phone (the same phone that was paired to the vehicle when the PIN was entered initially) is paired to the vehicle, the user will not be prompted to re-enter the PIN after it has been entered.
A871447 2010146-
Supersedes Technical Service Bulletin Group 87 number 12-27 dated April 24, 2012. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor. If the odor is noticeable in the vehicle when the engine is not turned on, the cause may be mold and mildew in the passenger compartment, and not be related to the A/C system. All other possible sources of the odor must be investigated before this bulletin can be performed.
A911426 2036576-
The MMI screen goes blank then restarts or the MMI screen freezes for a few minutes then recovers when the user searches for a contact name in the MMI address book when a phone is connected to the vehicle via Bluetooth. This condition occurs because special characters (including symbols, emoticons, or map icons) are stored in the name field of a phonebook contact.
2035757/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A741417 2035757-
Supersedes Technical Service Bulletin Group 74 number 13-15 dated November 15, 2013. Customer may complain that the seat pneumatics (side bolsters and lumbar support) actuate without any input from the customer. This condition can occur when the vehicle is driven at high altitudes or when the outside temperature fluctuates. DTCs may be present in the front seat pneumatics control modules, J873 and J872 (address words 88 and 89) or in the rear seat pneumatics control modules (in certain A8 models only), J875 and J874 (address words 8A and 8D).
00145920297372
When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
A001459 2029737-
Supersedes Technical Service Bulletin Group 00 number 12-34 dated June 6, 2012. The process of draining oil through the drain plug is not always tidy. When oil is drained through the drain plug, the oil might spill on components around the oil pan area. If it is not properly cleaned up, this spilled oil could drip after the procedure is complete, causing unnecessary customer complaints.
01146720284453
Optimized software in the engine control module.
2028445/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011467 2028445-
Supersedes Technical Service Bulletin Group 01 number 13-43 dated November 26, 2013. The MIL is on, often illuminating at temperatures below 0°C/32°F. DTC P010600 is store in the ECM. Optimized software in the engine control module.
Edition73
Technical bulletins and updates
Edition72
Windows XP- End of Support (EOS) and new VAS diagnostic services
01146420356172
The engine control module (ECM) software needs to be updated.
2035617/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011464 2035617-
Supersedes Technical Service Bulletin Group 01 number 13-46 dated December 9, 2013. The customer reports that the engine sporadically may run rough at operating temperature, without significant loss of power or stalling. The engine control module (ECM) software needs to be updated.
2036070/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
26 14 21 2036070
While these types of noises could be attributed to a number of components in the vehicle, misaligned front exhaust hangers may be a contributing factor. Various noises, such as humming, vibration, and/or rattling are heard coming from under the vehicle or from near the center console area.
A261421 2036070-
Various noises, such as humming, vibration, and/or rattling are heard coming from under the vehicle or from near the center console area. While these types of noises could be attributed to a number of components in the vehicle, misaligned front exhaust hangers may be a contributing factor.
Edition71
Technical bulletins and updates
00145820266925
Audi A8 L W12 engine and transmission - Repair Authorization
2026692/5
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A001458 2026692-
Supersedes Technical Service Bulletin Group 00 number 12-43 dated December 21, 2012. If a 2012 - 2015 Audi A8 L W12 arrives at an Audi dealership and requires diagnosis or repair, a Repair Authorization must be obtained. Prior to any repair, a Technical Assistance Center (TAC) ticket must be created for engine and transmission concerns only. Routine maintenance and PDI do not require prior authorization or a Technical Assistance Center (TAC) ticket. These procedures are mandatory until further notice. Warranty repairs without repair authorization via a TAC contact will not be reimbursed.
01146220361693
In tank, fuel pump may be making a straining noise. Diesel fuel requires additive blending or ?winterization? to be useable at low temperatures. At temperatures below 20° F (-7° C), No. 2 Diesel with insufficient winterization blending may lose its fluidity due to wax separation. This may clog the fuel filter or in-tank filter, preventing the engine from operating properly. No. 2 Diesel is blended by refineries to various levels of winterization (minimum useable temperature) based on month, geographical location, and the 10th percentile minimum ambient air temperature for the given region. Although rare, during sudden periods of extreme low temperatures (record lows), fuel stations may not be adequately prepared with No. 2 Diesel fuel with sufficient winterization to resist wax formation or ?gelling?.
2036169/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011462 2036169-
Supersedes Technical Service Bulletin Group 01 number 14-59 dated January 21, 2014. The MIL is on. DTC may be stored in the ECM. Drivability concerns such as hard starting/no starting are present. Outside temperature is sub-freezing. In tank, fuel pump may be making a straining noise.
A941432 2017806-
Supersedes Technical Service Bulletin Group 94 number 13-19 dated May 23, 2013. The light bulb warning light is displayed in the instrument cluster with the ?Vehicle lights: malfunction? message. DTCs are stored in the vehicle electrical system control module. Exterior lights are functioning properly. If the headlight switch is moved to an intermediate position and remains there, the light bulb warning light and the error message appear after approximately ten seconds. Once displayed, the message turns off after approximately five seconds. The light bulb warning light turns off only after the headlight switch is turned to a defined position, and the status of DTC 03280 or DTC 01800 are changed to sporadic. After 40 driving cycles without an implausible signal detected, the DTCs are automatically cleared.
01145920361692
In tank, fuel pump may be making a straining noise. Diesel fuel requires additive blending or ?winterization? to be useable at low temperatures. At temperatures below 20° F (-7° C), No. 2 Diesel with insufficient winterization blending may lose its fluidity due to wax separation. This may clog the fuel filter or in-tank filter, preventing the engine from operating properly. No. 2 Diesel is blended by refineries to various levels of winterization (minimum useable temperature) based on month, geographical location, and the 10th percentile minimum ambient air temperature for the given region. Although rare, during sudden periods of extreme low temperatures (record lows), fuel stations may not be adequately prepared with No. 2 Diesel fuel with sufficient winterization to resist wax formation or ?gelling?.
2036169/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011459 2036169-
Supersedes Technical Service Bulletin Group 01 number 14-55 dated January 8, 2014. The MIL is on. DTC P0087 may be stored in the ECM. Drivability concerns such as hard starting/no starting are present. Outside temperature is sub-freezing. In tank, fuel pump may be making a straining noise.
Edition69
Technical bulletins and updates
A461466 2022584-
Supersedes Technical Service Bulletin Group 46 number 12-23 dated June 18, 2012. Customer may report that the steering wheel vibrates or pulsates when the brakes are applied. Document contains the brake pulsation diagnostic guidelines.
01145520361691
In tank, fuel pump may be making a straining noise. Diesel fuel requires additive blending or ?winterization? to be useable at low temperatures. At temperatures below 20° F (-7° C), No. 2 Diesel with insufficient winterization blending may lose its fluidity due to wax separation. This may clog the fuel filter or in-tank filter, preventing the engine from operating properly. No. 2 Diesel is blended by refineries to various levels of winterization (minimum useable temperature) based on month, geographical location, and the 10th percentile minimum ambient air temperature for the given region. Although rare, during sudden periods of extreme low temperatures (record lows), fuel stations may not be adequately prepared with No. 2 Diesel fuel with sufficient winterization to resist wax formation or ?gelling?.
2036169/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011455 2036169-
The MIL is on. DTC P0087 may be stored in the ECM. Drivability concerns such as hard starting/no starting are present. Outside temperature is sub-freezing. In tank, fuel pump may be making a straining noise. Diesel fuel requires additive blending or ?winterization? to be useable at low temperatures. At temperatures below 20° F (-7° C), No. 2 Diesel with insufficient winterization blending may lose its fluidity due to wax separation. This may clog the fuel filter or in-tank filter, preventing the engine from operating properly. No. 2 Diesel is blended by refineries to various levels of winterization (minimum useable temperature) based on month, geographical location, and the 10th percentile minimum ambient air temperature for the given region. Although rare, during sudden periods of extreme low temperatures (record lows), fuel stations may not be adequately prepared with No. 2 Diesel fuel with sufficient winterization to resist wax formation or ?gelling?.
01145120305808
The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
2030580/8
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2035113/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011451 2030580-
Supersedes Technical Service Bulletin Group 01 number 13-19 dated August 1, 2013. The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTCs may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
A461465 2035113-
Supersedes Technical Service Bulletin Group 46 number 13-60 dated October 16, 2013. Customer may report rattling noises from front axle on uneven roads. There are conflicting tolerances in the alignment of pin and hole on the front brake discs.
A571499 2029151-
Supersedes Technical Service Bulletin Group 57 number 13-87 dated March 27, 2013. The door cannot be opened from outside with the outer door handle, but it can be opened with the inner handle. The complaint is often described as follows: The customer locks the vehicle and checks by pulling the door handle whether the vehicle is locked. When opening the vehicle again, the door cannot be opened. It feels as if the handle is slack. When fitting the Bowden cable from the mounting bar to the door lock, the cable can get kinked. In some cases, this can increase the inner friction of the strand in the Bowden cable. As a result, the door lock stays in pressed position or does not completely return to its zero position. When the Bowden cable gets twisted during the installation, the rubber grommets can get distorted. Consequently, the Bowden cable has a too-high inner friction and the door lock does not move to the zero position.
A911419 2026895-
Supersedes Technical Service Bulletin Group 91 number 11-16 dated October 5, 2011. During a Bluetooth call, the sound is difficult to hear for the other party. Voice recognition accuracy is poor. This TSB provides guidelines for testing microphones in a vehicle.
TSB-57-14-99
AUDI: ONCE VEHICLE IS LOCKED AND DOOR IS CHECKED, DOOR FAILS TO RE-OPENED WHEN USING OUTSIDE DOOR HANDLE. *PE
01134620356171
Rough idle at operating temperature
2035617/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
44134620103345
Tightening wheel bolts
A011346 2035617-
The customer reports that the engine sporadically may run rough at operating temperature, without significant loss of power or stalling. The engine control module (ECM) software needs to be updated.
A441346 2010334-
Supersedes Technical Service Bulletin Group 44 number 12-32 dated August 2, 2012. Wheel bolt requires torque adjustment. Torque sticks, torque extension bars, and impact guns/wrenches are not approved by Audi of America, Inc., and should not be used to apply torque to wheel bolts. Always use a calibrated torque wrench to attain the correct wheel bolt torque and follow the proper wheel tightening procedure as outlined in Elsa. Proper use of a calibrated torque wrench ensures that all wheel bolts are tightened equally and reduces the chances of repeat repairs. Using methods other than a calibrated torque wrench to attain correct wheel bolt torque may lead to problems.
Edition65
Audi Elsa Newsletter
TSB-44-13-46
AUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
SB-48326
AUDI: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION PROVIDED REGARDING WARRANTY EXTENSION ON CARBON BUILDUP REMOVAL, ENGINE CYLINDER HEAD SECONDARY AIR PORTS. MODELS 2009-2012. NO MODEL PROVIDED. *PE
0113432028445 2
New software in engine control module addressed the condition.
01134320284452
Manifold Abs.Pressure or Bar.Pressure Range/Performance G71/-F96 - implausible signal)
2028445/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011343 2028445-
Supersedes Technical Service Bulletin Group 24 number 12-11 dated January 25, 2012. MIL on, often illuminating at temperatures below 0°C/32°F. DTC is store in the engine control module. Optimized software in the engine control module.
Audi Newsletter
Elso pro reminder.
4413442022563 8
Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel.
44134420225638
Steering wheel shimmy, vibration and/or oscillation
A441344 2022563-
Supersedes Technical Service Bulletin Group 44 number 13-42 dated September 27, 2013. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration while driving at highway speeds from 55 - 80 mph (88 - 128 km/h). This bulletin is not applicable if this vehicle has a Repair Authorization on this topic.
2035757/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
7413152035757 1
Customer may complain that the seat pneumatics (side bolsters and lumbar support) actuate without
A741315 2035757-
Customer may complain that the seat pneumatics (side bolsters and lumbar support) actuate without any input from the customer. This condition can occur when the vehicle is driven at high altitudes or when the outside temperature fluctuates. DTCs may be present in the front seat pneumatics control modules, J873 and J872 (address words 88 and 89) or in the rear seat pneumatics control modules (in certain A8 models only), J875 and J874 (address words 8A and 8D). No leak is present. There is a software issue in the seat pneumatics control modules that causes the seat pneumatics to automatically actuate in high altitudes (change in air pressure) or in fluctuating temperatures in order to maintain pressure.
9113142013790 8
The navigation DVD or other CD/DVD cannot be ejected.
A911314 2013790-
Supersedes Technical Service Bulletin Group 91 number 11-25 dated November 29, 2011. The navigation DVD or other CD/DVD cannot be ejected. There are no DTCs stored in the corresponding module. The eject button is not stuck. When the eject button is pushed, the drive does not sound as if it is trying to eject the CD/DVD. Vehicles with DVD-based navigation systems now have the navigation DVD installed during production. To prevent theft of the DVD during transportation, the eject button of the navigation drive is disabled. The navigation system itself (e.g., route guidance) functions as specified. The eject buttons of vehicles without DVD-based navigation systems are not disabled during production, but could behave as described in the Condition section of this bulletin. The eject button can be enabled through Guided Fault Finding.
Edition60
Audi Elsa Newsletter
2034000/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
96137820340003
Lane Change Assistant sporadically inoperative
A911311 2027718-
Supersedes Technical Service Bulletin Group 91 number 13-86 dated June 11, 2013. When the driver uses the Bluetooth hands-free telephone system to make a call, the listener on the other end cannot clearly understand the driver. The driver?s voice sounds muffled, as if it is being heard from under water. The microphone seal is damaged during installation into the roof module.
A961378 2034000-
Supersedes Technical Service Bulletin Group 96 number 13-74 dated September 11, 2013. Customer complains that Audi Lane Change Assistant deactivates or is sporadically inoperative. Message ?Side Assist Unavailable? is displayed in the Driver Information Display when the system deactivates. Workshop finds that Audi Lane Change Assistant can be activated without issue. DTCs are stored in the Lane Change Assistance control module. A software issue within J769 causes a diagnostic fault, which deactivates the Audi Lane Change Assistant temporarily.
TSB-96-13-78
AUDI: DRIVER INFORMATION DISPLAY MESSAGE SIDE ASSIST UNAVAILABLE AND LANE CHANGE ASSIST IS SPORADIC INOPERATIVE BECAUSE OF SOFTWARE DIAGNOSTIC FAULT. MODEL 2011-2013 A6, A7, A8. *PE
Edition59
Audi Elsa Newsletter
Reference-Oil Ca
This document contains the Audi oil capacity chart.
00135520355811
Oil filling procedure for W12 engines
2035581/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A001355 2035581-
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to a W12 engine, the increased oil flow rate forces oil into the intake manifold or combustion chamber and damages the engine.
A871346 2035582-
The A/C Compressor has been diagnosed as faulty and will be replaced under warranty. When performing replacement of an A/C Compressor under warranty, the amount of refrigerant and oil recovered must be documented.
AA001355-1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Edition58
Audi Elsa Newsletter
2035113/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A461360 2035113-
Supersedes Technical Service Bulletin Group 46 number 13-58 dated August 26, 2013. Customer may report rattling noises from front axle on uneven roads. There are conflicting tolerances in the alignment of pin and hole on the front brake discs.
27 13 19 2029010
Low battery charge: excess current draw location
A271319 2029010-
Supersedes Technical Service Bulletin Group 27 number 12-13 dated March 22, 2012. The customer may report a discharged battery when trying to start the vehicle. The condition results in a no start.
741312 2004327-4
Supersedes Technical Service Bulletin Group 70 number 08-39 dated December 4, 2008. Leather upholstery is dirty or stained.
Chart
Audi Oil Capacity Chart
A511307 2009967-
Supersedes Technical Service Bulletin Group 51 number 13-06 dated August 9, 2013. Instructions for vehicle inspection, protection removal, and detailing.
A441342 2022563-
Supersedes Technical Service Bulletin Group 44 number 13-36 dated February 18, 2013. This bulletin is not applicable if this vehicle has a Repair Authorization on this topic. Customer feels vibration in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not lead to any handling concerns or loss of vehicle control. The customer feels the vibration in one or both of the following circumstances: * When driving at highway speeds from 55 - 80 mph (88 - 128 km/h). * When applying low brake pedal pressure with minor slow down. The vibrations felt by the customer could be a result of the harmonic vibrations caused by the radial force variation (RFV) of the tires.
A571394 2035367-
Various features in the rear passenger compartment are inoperative. Some features may include power rear windows, rear climate control operating unit, rear sunroof panel, rear reading lamps, rear cigarette lighters, etc. By design, many electronically-controlled features in the rear passenger compartment, in addition to the power rear windows, are deactivated if the child lock in the driver's door is activated.
A721309 2035357-
Seat memory function does not work. DTCs are stored. In the event of a voltage fluctuation in the vehicle power system, the software of the seat adjustment module fails.
4013352023187
Squeaking noises when steering or maneuvering
40133520231873
Squeaking noises when steering or maneuvering
A401335 2023187-
Supersedes Technical Service Bulletin Group 40 number 12-23 dated May 14, 2012. Squeaking noises are heard when the steering wheel is turned or maneuvered. The noises may be more prevalent in wet weather. The folds of the outer rubber boots on the front axle shafts may come in contact with each other when the steering wheel is turned, causing squeaking noises. These noises are more likely to occur when the vehicle is new. The volume and occurrence of the noise will dissipate after a short break-in period.
A901341 2010353-
Supersedes Technical Service Bulletin Group 90 number 10-14 dated August 10, 2010. Cigarette lighter element will not lock into the lighter socket -U1- to begin the heating process, or the lighter element will not automatically release once the heating process has completed. As a result, the socket can become inoperative when used as a power outlet.
A911308 2028190-
Supersedes Technical Service Bulletin Group 91 number 11-28 dated December 9, 2011. Customer is inquiring about retrofitting the MMI system with a language pack or map database outside of factory-available options.
43132320187659
Self-leveling compressor inoperative
A431323 2018765-
Supersedes Technical Service Bulletin Group 43 number 13-14 dated April 11, 2013. The self-leveling system can no longer be adjusted with the MMI. The compressor for the self-leveling system continues to run after the engine has been switched off and the vehicle has been locked. DTCs may be stored in the level control system module. Because of poor performance or failure of the air suspension compressor, the vehicle ride height cannot be adjusted. As a safeguard, the control module will lower the vehicle to the lowest position and illuminate the warning light. Drivability is not affected.
Edition53
Audi Elsa Newsletter
A481354 2028220-
Supersedes Technical Service Bulletin Group 48 number 12-30 dated June 25, 2012. Steering wheel appearance damaged due to external impact (e.g., contact with finger nails, zippers, watches, rings, etc.). External impact (e.g., contact with finger nails, zippers, watches, rings etc.) can cause damage to the appearance of the steering wheel. This type of damage is not warrantable, as numerous investigations have shown that there is no fault in material or workmanship.
A911307 2030465-
Supersedes Technical Service Bulletin Group 91 number 13-98 dated August 5, 2013. MMI 3G+ Sound system "popping" and various other technical Issues (K0715 Update). This bulletin only applies to vehicles with Navigation Plus (PR Number 8DY). The applicable vehicles can be clearly identified by the SIM card slot on the faceplate of the front MMI mainunit.
2034000/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
37 13 17 2029027
The DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored as a result of the following situations: ? DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is being maneuvered in or out of a parking spot). ? DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a low diagnosis threshold. ? DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to a low diagnosis threshold.
37131720290278
Transmission warning message in cluster
96137420340002
Lane Change Assistant sporadically inoperative
A371317 2029027-
Supersedes Technical Service Bulletin Group 37 number 13-02 dated April 26, 2013. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs is stored in the transmission control module (TCM). If DFCCs do not match exactly, this TSB does not apply.
A801305 2033806-
Supersedes Technical Service Bulletin Group 80 number 13-04 dated August 9, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. ?Limp Home? mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss, or due to a faulty N82 control valve. Inspection of the coolant control valves N82, N509, or N488 reveals the presence of coolant inside the electrical connector as shown in the illustration. The connectors, wiring harness, and/or connected control units may have been damaged from exposure to coolant.
A911304 2013422-
Supersedes Technical Service Bulletin Group 91 number 12-49 dated July 31, 2012. The Bluetooth® telephone cannot be connected to the vehicle?s Infotainment system. Certain restrictions are present when a Bluetooth device is connected to the vehicle. The restrictions vary depending on the vehicle system present.
A961374 2034000-
Supersedes Technical Service Bulletin Group 96 number 13-63 dated May 29, 2013. Audi Lane Change Assistant deactivates or is sporadically inoperative. Message ?Side Assist Unavailable? is displayed in the Driver Information Display when the system deactivates. Audi Lane Change Assistant can be activated without issue. DTCs are stored in the Lane Change Assistance control module. A software issue within J769 causes a diagnostic fault, which deactivates the Audi Lane Change Assistant temporarily.
TSB-37-13-17
AUDI: THE TRANSMISSION CONTROL MODULE SOFTWARE WOULD ILLUMINATE IN INSTRUMENT CLUSTER AND VEHICLE FAILS TO MOVE AFTER SHIFTING INTO GEAR AND NEW SOFTWARE IS NEEDED TO ADDRESS CONDITION. *PE
A871345 2024644-
Supersedes Technical Service Bulletin Group 87 number 13-41 dated May 30, 2013. Moisture in the driver or front passenger foot well. Due to a faulty and/or incorrectly installed condensation drain hose, condensation from the evaporator could enter the front foot well areas through a gap between the body and the sealing surface of the drain hose.
A101310 2018288-
Supersedes Technical Service Bulletin Group 10 number 10-02 dated September 14, 2010. Prior to engine replacement, any debris lodged in transferred assemblies must be removed. If the vehicle's engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
A911302 2018187-
Supersedes Technical Service Bulletin Group 91 number 11-20 dated October 21, 2011. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
A461358 2035113-
Customer may report rattling noises from front axle on uneven roads. There are conflicting tolerances in the alignment of pin and hole on the front brake discs.
A871344 2020124-
Supersedes Technical Service Bulletin Group 87 number 13-43 dated July 12, 2013. Air conditioning is inoperative. The HVAC blower functions normally. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Q5 vehicles. The A6 and A8 are not affected by this type of failure. The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged. Sensor G395 is a LIN slave of the vehicle electrical system control module. The vehicle electrical system control module transfers the information provided by the sensor via the comfort data bus to the climate control module, J255.
A011325 2035002-
MIL on. DTCs are stored in the engine control module. The DTCs may appear during monitoring of the secondary air system during the engine cold starting phase. With the electric solenoid valves controlled, a diagnosis cycle is performed and the secondary air pressure is measured for a specified value. The secondary air pressure can be influenced by several factors; which may include a leak in the vacuum system or a faulty exhaust catalyst. Review the Service section of this bulletin for more information.
A641330 2034955-
Supersedes Technical Service Bulletin Group 64 number 13-28 dated August 12, 2013. There are squeaking noises coming from the front door when the window is operated. When the window guide seal is not correctly fitted in the rail of the front door, it can lead to increased friction. This increased resistance causes the squeaking noises.
A461357 2031135-
Supersedes Technical Service Bulletin Group 46 number 12-26 dated October 23, 2012. The yellow warning for electromechanical parking park (EPB) appeared once in the instrument cluster. The warning turned off after the ignition was cycled, and there have not been additional occurrences. EPB function was not affected. The adaptive cruise control (ACC) was inoperative once, but it resumed proper operation after the ignition was cycled, and there have not been additional occurrences. DTCs are logged in the EPB control module. There is an issue with the software in the EPB control module that occurs one time. Because the issue only occurs once, replacing the control module could cause an additional occurrence.
A641329 2020552-
Windshield is streaked, has a snakeskin appearance, or its surface feels rough. Residue from industrial fallout as well as normal road dirt and grime may accumulate on windshield.
A641328 2034955-
There are squeaking noises coming from the front door when the window is operated. When the window guide seal is not correctly fitted in the rail of the front door, it can lead to increased friction. This increased resistance causes the squeaking noises.
A511306 2009967-
Supersedes Technical Service Bulletin Group 00 number 11-23 dated June 3, 2011. Instructions for vehicle inspection, protection removal, and detailing.
A801304 2033806-
Supersedes Technical Service Bulletin Group 80 number 13-03 dated May 13, 2013. Malfunction Indicator Lamp is on. Climate system heating performance is insufficient. Coolant level warning is on. Engine temperature is elevated. "Limp Home" mode is active. Faults are stored in the transmission control module. Coolant loss is found from one or more control valves: N82, N509, or N488. Coolant may have migrated into the wiring harness through the connector and into various control units. Climate system heating performance is insufficient due to coolant loss, or due to a faulty N82 control valve. Inspection of the coolant control valves N82, N509, or N488 reveals the presence of coolant inside the electrical connector. The connectors, wiring harness, and/or connected control units may have been damaged from exposure to coolant.
TSB-80-13-04
AUDI: PRESENCE OF COOLANT LOSS INSIDE ELECTRICAL CONNECTOR, CAUSES ENGINE WARNING LIGHT TO ILLUMINATE AND TEMPERATURE OF ENGINE TO ELEVATE AND FAILURE OF CLIMATE SYSTEM HEATING PERFORMANCE. MODEL 2010-2012 A6, A7, A8, Q7, A5 CABRIOLET, TT, A4, Q5. *PE
2013 06 Audi Bra
This document contains information on the Audi braking guard.
2013_06_ATU Audi
This document contains information on the Audi side assist update.
A911398 2030465-
Supersedes Technical Service Bulletin Group 91 number 12-65 dated October 25, 2012. MMI 3G+ Sound system "popping" and various other technical Issues (K0715 Update). Only apply this bulletin to vehicles if the customer complaint is in the correct group. Applying the update to vehicles outside of the appropriate group can cause repeat repairs and the warranty claim may be denied. This bulletin only applies to vehicles with Navigation Plus (PR Number 8DY). The applicable vehicles can be clearly identified by the SIM card slot on the faceplate of the front MMI mainunit.
A011319 2030580-
Supersedes Technical Service Bulletin Group 01 number 13-97 dated May 13, 2013. The yellow gearbox warning light may be illuminated. DTCs may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition.
A911396 2026390-
Supersedes Technical Service Bulletin Group 91 number 12-38 dated March 2, 2012. When a phonebook with a large number of contacts is being downloaded, the MMI screen freezes in one of the following scenarios: * After the initial Bluetooth connection (shortly after the phone is bonded to the vehicle), the screen freezes briefly. * After the ignition is switched on (shortly after the phone automatically reconnects with the vehicle). * After the phonebook has downloaded. * When the voice recognition system is used, a message appears in the MMI screen stating that the phone book is too large and that the voice recognition system cannot be used. The command "Call <Name from directory>" is a global MMI command that is available in the telephone menu and main menu screens. If either menu is displayed, the message can appear when the voice recognition button (push to talk) on the steering wheel is pressed.
Edition46
Audi Elsa Newsletter
Edition45
Audi Elsa Newsletter
37 13 09 2028715
After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
37130920287152
Rough gear changes both when accelerating and slowing down
68E3UPDATEa
Comfort System Central Control Module Software Update (NVLW)
68E8-B
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A371309 2028715-
Supersedes Technical Service Bulletin Group 37 number 12-40 dated February 28, 2012. Rough gear changes, both when accelerating and when slowing down. There is a rough driving power disruption that occurs sporadically and lasts for less than a second. After a mechatronics, torque converter, or complete gearbox replacement, the clutches must be adapted to the new component. This requires a gradual move of the clutch linings toward the optimal operating points in the most diverse load conditions. As a result, sporadic driving power disruptions lasting for less than a second or reduced shift comfort are possible over the first 500 miles. This is normal, and these issues will decrease over time. The issues can also occur if the adaptation values of the gearbox were deleted.
TSB-37-13-09
AUDI: IN SOME VEHICLES, THE CLUTCHES, AFTER HAVING TORQUE CONVERTER, COMPLETE GEARBOX REPLACEMENT OR MECHATRONICS, MUST ADAPT TO NEW COMPONENTS WITH GRADUAL MOVING OF CLUTCH LININGS IN MOST DIVERSE LOAD CONDITIONS. MODELS 2004-14, A3, TT, Q7, A4, A5, A6, A7, A8, Q5, S4, S5, S6, S7, RS5. *PE
Update Bulletin
On Audi A6 and A8 vehicles equipped with an electric sun blind for the rear window (3Y2, 3Y5, 3Y8), the blind may stop functioning if it is fully extended several times in quick succession. This Update is in effect until removed. Procedure is valid only for vehicles that show the 68E3 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the New Vehicle Limited Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale. On Audi A6 and A8 vehicles equipped with an electric sun blind for the rear window (3Y2, 3Y5, 3Y8), the blind may stop functioning if it is fully extended several times in quick succession.
A461348 2034404-
Supersedes Technical Service Bulletin Group 53 number 13-02 dated July 11, 2013. Customer may report that the vehicle does not start due to a discharged battery. DTC U101100 (supply voltage too low) is stored in the gateway, J533 (address word 19), and/or the electronic parking brake (EPB) control module, J540 (address word 53). According to the test plan "19-Read Data Bus Keep-Awake Manager", the EPB control module kept the data bus active for prolonged periods of time. The EPB switch appears to be permanently operating (applying or releasing the parking brake) due to an internal mechanical issue or because it is jammed or blocked by debris or by a foreign object. Test plan "19-Read Data Bus Keep-Awake Manager", identifies the EPB control module as keeping the data bus active for prolonged periods of time.
A911392 2030947-
Supersedes Technical Service Bulletin Group 91 number 12-61 dated September 25, 2012. The customer complains that when he or she is trying to place a phone call from the vehicle while using a Bluetooth®-connected phone, the phone call disconnects before it begins and an error shows on the MMI display. The message may be "Function not supported" or "Network error". The customer is using a phone with the Android operating system. In addition, Skype®, or another network-based communication software, is installed on the phone. Call can be placed directly from the phone without a problem. When the phone gets the request to place a call from the vehicle, a prompt appears on the phone asking the user to choose how the call should be placed. If the prompt is ignored, the MMI system disconnects the call assuming the phone is not responding.
2031367/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2034516/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A871343 2020124-
Supersedes Technical Service Bulletin Group 87 number 13-42 dated June 11, 2013. Air conditioning is inoperative. The HVAC blower functions normally. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Audi Q5 vehicles. The A6 and A8 are not affected by this type of failure. The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged. Sensor G395 is a LIN slave of the vehicle electrical system control module. The vehicle electrical system control module transfers the information provided by the sensor via the comfort data bus to the climate control module, J255.
A911391 2031367-
Supersedes Technical Service Bulletin Group 91 number 12-64 dated October 25, 2012. CD or DVD disks do not automatically change from one to the next in the external CD or DVD changer.
A961368 2029384-
Supersedes Technical Service Bulletin Group 96 number 13-64 dated June 20, 2013. The customer is able to program one or more of the Homelink buttons using their garage door remote, but after a few days or weeks, one or more of the programmed Homelink buttons no longer functions. The LED on the Homelink button that is no longer functioning now flashes slowly, indicating that no programming is stored. The customer's transmitter operates at 295Mhz. No DTCs are stored in any control units. At the workshop, the Homelink system can be programmed to the workshop garage door successfully. No trouble is found. The garage door opener control module, J530, was designed with an operational frequency range in which the 295Mhz frequency works correctly during the initial programming of the system. Over time, the transmitting frequency can drift out of range (especially in warmer climates), causing the system to lose its programming.
A961369 2034516-
Road lane markings are not detected or the Audi lane assist system is inoperative after the lane assist camera control module, J852, has been calibrated, the windshield has been replaced, or the air suspension level sensors have been adapted. A DTC for incorrect calibration may be stored in the camera control module (address word 85). The camera control module has not been properly calibrated; there is no technical problem.
A531302 2034404-
Customer may report that the vehicle does not start due to a discharged battery. DTC U101100 (supply voltage too low) is stored in the gateway, J533 (address word 19), and/or the electronic parking brake (EPB) control module, J540 (address word 53). According to the test plan "19-Read Data Bus Keep-Awake Manager", the EPB control module kept the data bus active for prolonged periods of time. The EPB switch appears to be permanently operating (applying or releasing the parking brake) due to an internal mechanical issue or because it is jammed or blocked by debris or by a foreign object. Test plan "19-Read Data Bus Keep-Awake Manager", identifies the EPB control module as keeping the data bus active for prolonged periods of time.
A961367 2019260-
Supersedes Technical Service Bulletin Group 96 number 12-37 dated June 11, 2012. The customer may report that the handheld transmitter cannot be programmed to the garage door opener control module, J530. The customer's door opener system may not be compatible with J530. The battery in the handheld transmitter may be too weak for a good signal. The battery charge may be sufficient to operate the garage door opener, but not enough to program the remote transmitter to the vehicle system. In A4 Model Years 2005 - 2006 and A3 Model Year 2009, the actual location of the garage door opener control module differs from the location shown in the owner's manual (opposite side of front bumper). The customer may misunderstand the programming procedure, particularly if the customer's HomeLink® opener system is using an alternate code. The handheld transmitter's programming function may become inoperative, or the transmitter is too far away from J530. Interference prevents the communication between handheld transmitter and J530. If the vehicle flashes during the programming of a handheld transmitter, this does not necessarily indicate that the programming was successful; it only indicates that the vehicle has recognized and saved a signal.
68E3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
68E3UPDATE
Comfort System Central Control Module Software Update (NVLW)
A461347 2034387-
Customer may report sporadically hearing the parking brake being actuated after the vehicle has been switched off. If the customer does not identify the sound as the sound of the parking brake being actuated, he or she may simply complain of hearing noises from the rear brakes. Ignition is switched off. Steering is locked. Park is selected. Parking brake is not engaged. If the electro-mechanical parking brake is not operated for some time, the free play between brake pads and brake discs increases because of normal brake pad wear. The parking brake control unit performs an automatic correction about every 621 miles (1,000 km). On A8 models, the brake pad thickness is also calculated.
Edition42
Audi Elsa Newsletter
Update68E3
Comfort System Central Control Module Software Update (NVLW)
01130920147538
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
A011309 2014753-
Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.
A191341 2025303-
Supersedes Technical Service Bulletin Group 19 number 13-35 dated March 25, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
19I5
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
19i51
Coolant Pump and Power Steering Pump
19i5UPDATE
Coolant Pump and Power Steering Pump (NVLW)
96136920345161
Lane assist inoperative
A871342 2020124-
Supersedes Technical Service Bulletin Group 87 number 12-37 dated November 16, 2012. Air conditioning is inoperative. The HVAC blower functions normally. Battery discharged; however, when charged, there is no bus silence when vehicle ignition is off. The A/C pressure/temperature sensor, G395, leaks refrigerant. This causes sensor G395 to show an incorrect or implausible value when reading MVBs. An incorrect signal or a low refrigerant level in the system can cause the air conditioning compressor to deactivate. The LIN cable connecting the vehicle electrical system control module, J519, to sensor G395 is pinched or cut. This affects the A4/S4, A5/S5 Coupe and Cabriolet, and Audi Q5 vehicles. The A6 and A8 are not affected by this type of failure. The pressure sensor G395/G65 sends an incorrect signal that prevents bus silence and the battery is discharged. Sensor G395 is a LIN slave of the vehicle electrical system control module. The vehicle electrical system control module transfers the information provided by the sensor via the comfort data bus to the climate control module, J255.
A911386 2027718-
Supersedes Technical Service Bulletin Group 91 number 12-68 dated November 12, 2012. When the driver uses the Bluetooth hands-free telephone system to make a call, the listener on the other end cannot clearly understand the driver. The driver?s voice sounds muffled, as if it is being heard from under water. The microphone seal is damaged during installation into the roof module.
SM562013
Seat Belt
A661330 2030471-
Supersedes Technical Service Bulletin Group 66 number 12-24 dated August 24, 2012. Customer may report the license plate attachment screws do not install properly. The license plate brackets are designed to be used with the appropriate length screw installed by hand with a screwdriver. Damaged warranty parts have been returned to Audi of America with evidence of excessive torque used when installing the screw and/or excessive screw length.
Edition38
Audi Elsa Newsletter
06012013
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Update19i5
Coolant Pump and Power Steering Pump
2034000/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
37-13-07
AUDI: SOME VEHICLES MAY LACK POWER OR WILL NOT MOVE AFTER STOP DUE TO SIMULTANEOUSLY DEPRESSING THE BRAKE AND ACCELERATOR PEDALS. *JS
96-13-63
AUDI: SOME VEHICLES MAY OCCASIONALLY EXPERIENCE INOPERATIVE LANE CHANGE ASSISTANT. *JS
94-13-19
AUDI: THE VEHICLE LIGHTS MALFUNCTION MESSAGE MAY BE DISPLAYED ON THE DASHBOARD CLUSTER. THERE IS NO FAILURE. ALSO INCLUDED MODEL A4 MY 2014, MODEL A5 CABRIOLET MY 2014, MODEL Q5 MY 2014, MODEL S7 MY 2012-2014, MODEL RS7 MY 2014. *JS
00134920335761
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay.
57-13-89
AUDI: SOME VEHICLES, IN COLD WEATHER, OCCASIONALLY, CANNOT BE UNLOCKED USING THE DOOR HANDLE TOUCH SENSOR. ALSO INCLDED ARE MODEL A4 MY 2014, MODEL A5 CABRIOLET MY 2014, MODEL Q5 MY 2014, MODEL RS5 CABRIOLET MY 2014, AND MODEL S5 CABRIOLET MY 2011-2014. *JS
A001349 2033576-
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
01139720305806
The customer complains that the vehicle sporadically cannot be started. The remote key being used is transmitting incomplete immobilizer information to the vehicle; resulting in the condition.
18-13-03
AUDI: SOME VEHICLE MAY EXPERIENCE COOLANT LOSS. THE MALFUNCTION INDICATOR LAMP IS ON. *JS
2028561/6
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2030580/6
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
37 13 06 2028561
Gearbox warning light on.
37-13-06
AUDI: GEARBOX LIGHT ILLUMINATED. A TRANSMISSION MALFUNCTION MAY OCCUR. THE VEHICLE MIGHT ACTIVATE LIMP HOME MODE. *JS
A011397 2030580-
Supersedes Technical Service Bulletin Group 01 number 13-94 dated May 8, 2013. The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTCs may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle; resulting in the condition.
Edition35
Elsaweb Newsletter
01139420305805
The remote key being used is transmitting incomplete immobilizer information to the vehicle; resulting in the condition.
2030580/5
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A011394 2030580-
Supersedes Technical Service Bulletin Group 01 number 12-60 dated December 7, 2012. The customer complains that the vehicle sporadically cannot be started. The yellow gearbox warning light may be illuminated. DTCs may be present. The remote key being used is transmitting incomplete immobilizer information to the vehicle; resulting in the condition.
Edition34
Elsaweb Newsletter
2029875/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
4613372029875
Noise caused by stone between rear brake disc and splash shield
37 14 22 2028985
The fault occurs with ATF temperature below 60° C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
2028561/5
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A371304 2028561-
Supersedes Technical Service Bulletin Group 37 number 13-82 dated January 23, 2013. There is no customer complaint about the gearbox. The gear lever display flashes. The following message is shown: "gearbox problem, journey can be continued with restrictions". DTCs are stored in the gear shift control module, J587 (address word 81). New software in the gear shift control module addressed the condition.
A371302 2029027-
Supersedes Technical Service Bulletin Group 37 number 13-99 dated April 1, 2013. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs are stored in the transmission control module (TCM), J217 (02). If DFCCs do not match exactly, this TSB does not apply. The DTCs are stored due to an issue with the transmission control module software.
37 13 01 2028985
Transmission warning message in cluster
A371301 2028985-
Supersedes Technical Service Bulletin Group 37 number 13-97 dated March 4, 2013. Customer may report transmission warning lamp illuminated in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or "Stuck Off" is stored in transmission control module (TCM), J217 (address word 03). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
ChartU
FLUID CAPACITY CHART
37H4UPDATE
Selector Lever Software Update (NVLW)
4313142018765
Self-leveling compressor inoperative
43131420187658
Self-leveling compressor inoperative
A431314 2018765-
Supersedes Technical Service Bulletin Group 43 number 12-11 dated October 29, 2012. The self-leveling system can no longer be adjusted with the MMI. The compressor for the self-leveling system continues to run after the engine has been switched off and the vehicle has been locked. DTCs may be stored in the level control system module, J197 (address word 34). Because of poor performance or failure of the air suspension compressor, the vehicle ride height cannot be adjusted. As a safeguard, the control module will lower the vehicle to the lowest position and illuminate the warning light. Drivability is not affected.
37 13 99 2029027
The DTCs are stored due to an issue with the transmission control module software. Specific DFCCs are stored as a result of the following situations: - DTC P060A00 with DFCC 8692 can be logged when a driving mode (Drive or Reverse) is selected within one second of selecting Neutral, while the vehicle rolls at a speed less than 2 mph (such as when the vehicle is being maneuvered in or out of a parking spot). - DTC P060A00 with DFCC 8694 can be logged when the gear is quickly changed from Park to Neutral, due to a low diagnosis threshold. - DTC P060A00 with DFCC 12480 can be logged when the gear is changed using the Tiptronic function, due to a low diagnosis threshold.
37139920290276
Transmission warning message in cluster.
A001348 2002047-
Supersedes Technical Service Bulletin Group 00 number 11-19 dated April 8, 2011. This TSB contains information on technician preparation when calling the Audi Technical Assistance Center
A371399 2029027-
Supersedes Technical Service Bulletin Group 37 number 12-77 dated December 19, 2012. Customer may report transmission warning light is illuminated. In some cases, the vehicle will not move after being started and placed into gear. After key cycle, the vehicle drives without restriction. DTCs are stored in the transmission control module, J217 (02). If DFCCs do not match exactly, this TSB does not apply.
2031273/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A551329 2031273-
Supersedes Technical Service Bulletin Group 55 number 13-28 dated February 27, 2013. The movement-activated rear lid opening (also known as "Hands-free trunk release") sporadically is inoperative. This feature is installed on all A8 vehicles with Audi advanced key (PR No. 4I3) from CW 45/2011 production.
2033428/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A851314 2033428-
The instrument panel vents cannot be adjusted. The knob may be broken. The force required to adjust the vent is greater than the attachment strength of the knob. As a result, the knob may break.
A911380 2032706-
Supersedes Technical Service Bulletin Group 91 number 13-73 dated January 25, 2013. Customer complains of a "popping" noise from the radio followed by 10-15 seconds of no audio. The concern can happen in any audio source. Vehicle is equipped with MMI 3G or MMI 3G+ infotainment systems. Vehicle is not equipped with Bose or Bang & Olufsen sound systems. An ignition cycle is not required for audio to resume.The problem originates in the HD radio code, which can create a "resetting" within the radio unit. Because the tuner is always active in the background, the problem can occur regardless of the audio source or if the HD radio is on or off. It can also occur at any point that the MMI is on, but not necessarily active. For example, the customer opens a door and the MMI starts up. Even though the system is not ?on? because the ignition is not active, the tuner is running and can create the effect.
A571387 2029151-
Supersedes Technical Service Bulletin Group 57 number 12-80 dated November 9, 2012. The door cannot be opened from outside with the outer door handle, but it can be opened with the inner handle. The complaint is often described as follows: The customer locks the vehicle and checks by pulling the door handle whether the vehicle is locked. When opening the vehicle again, the door cannot be opened. It feels as if the handle is slack.
A191335 2025303-
Supersedes Technical Service Bulletin Group 19 number 11-19 dated February 10, 2011. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
03-20-2013
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2033344/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
4013292033344
Squeaking suspension strut
40132920333441
Squeaking suspension strut
A401329 2033344-
Customer may hear squeaking or beeping noises from front of vehicle when driving on uneven roads after a stationary period. This condition occurs on vehicles with air suspension (PR-1BK) if the damper was very warm when the engine was switched off. The noise disappears as the damper warms up, after compressing once or twice. Bubbles are created in the oil because of temperature fluctuations, particles, and high oil flow speed. The bubbles gather around the damping adjustment valve when the engine is switched off. When the vehicle is started again, the cold oil prevents the bubbles from being dispersed quickly, which reduces the hydraulic damping. The reduced hydraulic damping causes the armature in the damper to vibrate, which creates squeaking noises. As soon as the bubbles have been dispersed, the hydraulic damping works fully and the noise disappears.
A571386 2027368-
Supersedes Technical Service Bulletin Group 57 number 12-73 dated September 24, 2012. The exterior door handle touch sensors (Advanced key) are inoperative on one or several doors. The key blade can be used mechanically (driver door or trunk) or remote electrically (key remote buttons) to unlock and lock the vehicle.
A8 L W12 2012 FL
Fluid Capacity Chart.
37H4-4J
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Update Bulletin-
On Audi A8 vehicles manufactured within a specific period, the system diagnosis may detect a sporadic implausible condition of the selector lever sensors when the ignition is switched on. As a result, the gearbox warning lamp lights up and it is no longer possible to engage a gear. The Update is in effect until removed. Procedure is valid only for vehicles that show the 37H4 code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicles must be within the New Vehicle Limited Warranty. Procedure must be performed within the allotted timeframe stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale. On Audi A8 vehicles manufactured within a specific period the system diagnosis may detect a sporadic implausible condition of the selector lever sensors when the ignition is switched on. As a result, the gearbox warning lamp lights up and it is no longer possible to engage a gear.
2033377/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A481340 2033377-
Customer states the vertical adjustment of the steering column does not work or works intermittently. Concern may or may not be duplicated. Software issues causing sporadic failure of the power steering column vertical adjustment.
2033355/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A911378 2033355-
Adaptive Cruise Control (ACC) does not work. The message "ACC and braking guard: unavailable at this time. No sensor vision" appears in the instrument cluster. DTC is logged in the distance regulation control module, J428 (address word 13).
TSB-91-13-78
AUDI: THE FIELD OF VISION OF RADAR SENSOR(S) ARE BLOCKED, THIS IS DUE TO LEAVES, SNOW, WATER SPRAY, OR DIRT, CAUSING DEACTIVATION OF RADAR SENSORS, IF NO OBJECTS ARE DETECTED FOR EXTENDED DURATION. MODEL 2011-2014 A6, A7, A8. *PE
2036477/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
37 13 97 2028985
The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
A371397 2028985-
Supersedes Technical Service Bulletin Group 37 number 13-86 dated February 6, 2013. Customer may report transmission warning lamp illuminated in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or "Stuck Off" is stored in transmission control module, J217 (03). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
A571385 2017082-
Supersedes Technical Service Bulletin Group 57 number 13-82 dated February 5, 2013. Central locking via remote control does not work either sporadically or permanently. The locks can still be operated manually. Missing synchronization between the remote control key and vehicle because the battery has been disconnected or the battery of the remote control has been replaced. If other senders operate in the same frequency range (mobile phones, TV stations, wireless headphones, baby monitors, other vehicle remote controls, etc.), the remote control key may have been temporarily switched off because a clear identification of the remote control key is not possible. This is necessary to prevent an unintentional unlocking of the vehicle by other unrelated senders.
Edition26
Elsaweb Newsletter
A551328 2031273-
Supersedes Technical Service Bulletin Group 55 number 12-26 dated October 23, 2012. The movement-activated rear lid opening (also known as "Hands-free trunk release") sporadically is inoperative. This feature is installed on all A8 vehicles with Audi advanced key (PR No. 4I3) from CW 45/2011 production.
SB-2031273/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A911376 2033032-
Call quality using the hands-free function is poor. Additionally, voice-activated functions may be restricted. The driver sounds muffled. The voice of the driver is quiet. The driver's voice is accompanied by background interference. Voice activated commands are not recognized. Various malfunctions can result from the normal airflow out of center instrument panel vents that are directed upward at the microphones in the roof module, which can limit microphone sensitivity.
SB-2033032/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
3713932033046
Hesitation concerns under certain driving conditions
4413362022563
Steering wheel shimmy, vibration and/or oscillation
44134220225637
Steering wheel shimmy, vibration and/or oscillation
A371393 2033046-
Customer feels hesitation during driving. Incorrect software calibration may cause hesitation.
A441336 2022563-
Supersedes Technical Service Bulletin Group 44 number 13-35 dated January 18, 2013. Customer feels vibration from 55 - 80 mph (88 - 128 km/h) in the seat, vehicle floor, footwell, pedals, or steering wheel. This condition does not result in any handling concerns or loss of vehicle control.
SB-2033046/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TSB-37-13-93
AUDI: 37 HESITATION CONCERNS UNDER CERTAIN DRIVING CONDITIONS. INCORRECT SOFTWARE CALIBRATION MAY CAUSE HESITATION. *JS
A941306 2017806-
Supersedes Technical Service Bulletin Group 94 number 12-79 dated June 6, 2012. Light bulb warning light and the message Vehicle lights: malfunction is displayed in the instrument cluster display. DTC 03280 (Light switch position implausible signal) is stored in the vehicle electrical system control module, J519 (09). Exterior lights are functioning properly. If the headlight switch is moved to an intermediate position and remains there, the light bulb warning light and the error message appear after approximately ten seconds. Once displayed, the message turns off after approximately five seconds. The light bulb warning light turns off only after the headlight switch is turned to a defined position, and the status of DTC 03280 is changed to sporadic. After 40 driving cycles without an implausible signal detected, the DTC is automatically cleared.
3713862028985
Transmission warning message in cluster, P074100 stored in TCM
A371386 2028985-
Supersedes Technical Service Bulletin Group 37 number 13-85 dated February 4, 2013. Customer may report transmission warning lamp illuminated in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 "Torque Converter Clutch Circuit Performance" or "Stuck Off" is stored in TCM. The fault occurs with ATF temperature below 60o C. Check for this temp range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
1913342028574
Coolant leak in Engine compartment
A191334 2028574-
Supersedes Technical Service Bulletin Group 19 number 12-29 dated February 7, 2012. Coolant level warning light on. Coolant loss in the engine compartment. Smell of evaporated coolant from engine compartment. The possible cause is a leak on the tee connector hose located in the coolant pipe between alternator, coolant pipe, and oil cooler.
A571382 2017082-
Supersedes Technical Service Bulletin Group 57 number 11-55 dated August 22, 2011. Central locking via remote control does not work either sporadically or permanently. The locks can still be operated manually. Missing synchronization between the remote control key and vehicle because the battery has been disconnected or the battery of the remote control has been replaced. If other senders operate in the same frequency range (mobile phones, TV stations, wireless headphones, baby monitors, other vehicle remote controls, etc.), the remote control key may have been temporarily switched off because a clear identification of the remote control key is not possible. This is necessary to prevent an unintentional unlocking of the vehicle by other unrelated senders.
A911374 2024323-
Supersedes Technical Service Bulletin Group 91 number 12-61 dated October 1, 2012. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
SB-2028574/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
3713852028985
Transmission warning message in cluster, P074100 stored in TCM
A371385 2028985-
Supersedes Technical Service Bulletin Group 37 number 13-80 dated January 16, 2013. Customer may report transmission warning lamp illuminated in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 "Torque Converter Clutch Circuit Performance" or "Stuck Off" is stored in TCM. The fault occurs with ATF temperature below 60o C. Check for this temp range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
2032849/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2028561/4
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
37 13 82 2028561
New software in the Selector Lever Control Module (J587) addressed the condition. The gear lever display flashes. The message "gearbox problem, journey can be continued with restrictions" is shown.
37138220285614
Gearbox warning light on - Faults P0605 and/or P17EC stored in Selector lever module 81
44133520225635
Steering wheel shimmy, vibration and/or oscillation
37 13 80 2028985
DTC P074100 Torque Converter Clutch Circuit Performance or Stuck Off is stored in TCM. Customer may report transmission warning lamp illuminated in instrument cluster.
37138020289856
Transmission warning message in cluster, P074100 stored in TCM
1335201004313
Engine oils that meet Audi Oil Quality Standards.
0012432026692
Engine and Transmission Repair Authorization
0112652030230
MIL on, A8 4.2 FSI, P0491 or P0492 secondary air system bank 1/2 Insufficient flow - Repair Authorization
A001243 2026692-
Supersedes Technical Service Bulletin Group 00 number 11-28 dated June 16, 2011. If an all-new 2012 Audi A8 L W12 arrives at an Audi dealership and requires diagnosis or repair, a Repair Authorization must be obtained. A Technical Assistance Center (TAC) ticket must be created for Engine Transmission concerns only, prior to any repair related to the Audi A8 L W12. Routine maintenance and PDI do not require prior authorization or a Technical Assistance Center (TAC) ticket. These procedures are mandatory until further notice. Warranty repairs without repair authorization via a TAC contact will not be reimbursed.
A011265 2030230-
Supersedes Technical Service Bulletin Group 01 number 12-52 dated July 23, 2012. Engine warning light on. DTCs are present.Because of an insufficient vacuum during the catalyst heating phase, the secondary air valves may close prematurely.
A911270 2032240-
The Google Earth map will not load. The display shows an active data connection, and ? Google? is almost fully white. Customer has active Audi Connect subscription. All other Audi Connect functions operate normally. The concern only occurs if the vehicle is started in a 2G cellular zone. The system operates normally if started in a 3G cellular zone. The vehicle has MMI software 0566 installed. Certain Audi Connect partner carriers are transmitting data that is not supported by the MMI. The data disrupts the loading process of Google Earth and causes it to not completely load.
SB-2026692/4
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2030230/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2032240/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
3712772029027
Transmission warning message in cluster, P060A00 stored
A371277 2029027-
Supersedes Technical Service Bulletin Group 37 number 12-67 dated September 28, 2012. Customer may report gearbox warning light on. In some cases after starting vehicle and placing into gear the vehicle would not move. After key cycle the vehicle drives without restriction. The entry P060A00 with DFCC 8692 can be logged in the following situation: After selecting Neutral, a driving mode (D or R) is selected within one second while the vehicle rolls (at under 2 mph). This can, for example, happen when maneuvering the vehicle into or from a parking area. The entry P060A00 with DFCC 8694 can be logged when quickly changing from P-N because of a low diagnosis threshold. The entry P060A00 with DFCC 12480 can be logged because of a low diagnosis threshold when changing gear with the tip function.
0112602030580
Sporadic vehicle no start (DTC P170100, P157000)
A011260 2030580-
Supersedes Technical Service Bulletin Group 57 number 12-76 dated October 4, 2012. The vehicle cannot be started sporadically. The yellow gearbox warning light may be illuminated. DTC's are logged. The remote key the customer is using is transmitting incomplete immobilizer information to the vehicle; resulting in the condition.
A901238 2032113-
The customer may state that the outside ambient temperature display is incorrect. To achieve a smoothening effect of the displayed outside ambient temperature, the value shown does not instantaneously follow the temperature sensor measurement. The display will not change faster than 4° F (2° C) per minute. This concept applies to both falling and rising temperatures. A programming strategy is also implemented to avoid incorrect readings on a parked vehicle, due to the temperature sensor being affected by outside influences such as radiant heat from the engine bay, elevated road surface temperatures, etc.
HunterVAGSpecUpd
Installation Instructions.
A941296 2027773-
Supersedes Technical Service Bulletin Group 94 number 12-69 dated March 15, 2012. Part or all of the daytime running lights do not work on vehicles with LED DRLs. For vehicles with halogen DRLs, please reference TSB 2017488, 94 Halogen Daytime running lights do not work. In the past, the daytime running light bulbs were a serviceable part. In this application, the LED strip cannot be replaced, and may have an associated control module. This TSB is for servicing information only.
4312112018765
Self-leveling compressor inoperative
A431211 2018765-
Supersedes Technical Service Bulletin Group 43 number 12-08 dated February 2, 2012. The self-leveling system cannot be adjusted any more with the MMI. The compressor for the self-leveling system continues to run after switching off the engine and locking the vehicle. DTCs may be stored. Because of poor performance or failure of the compressor for air suspension, the vehicle position cannot be adjusted. As a safeguard, the control module will lower the vehicle to the lowest position and illuminate the warning light. Drivability is not affected.
TSB-43-12-11
AUDI: THE CONTROL MODULE, AS A SAFEGUARD, WILL LOWER VEHICLE TO LOWEST POSITION AND ILLUMINATE WARNING LIGHT DUE TO FAILURE OF COMPRESSOR, FOR AIR SUSPENSION OR POOR PERFORMANCE, VEHICLE NOT ABLE TO BE ADJUSTED. MODELS 2004-2008 A6 (C6), 2013 A6 (C7); 2004-2013 A8 (D3-D4); 2013 A7 (C7); 2007-2011 Q7. *PE
A911264 2031367-
CD or DVD disks do not automatically change from one to the next in the external CD or DVD changer. The CD and DVD changer have different operating concepts. MMI3G: Disks in the CD changer are always automatically changed from one to the next. MMI3G+ (with Audi connect): Disks in the CD changer are automatically changed from one to the next, but this operation is disabled when the Repeat option is turned on in the Media Settings menu. By default (MMI factory default setting) the repeat option is set to ? Off?. DVD changer (A8 only): Disks in the DVD changer can only be changed manually.
A911265 2030465-
Supersedes Technical Service Bulletin Group 91 number 12-59 dated September 24, 2012. MMI system randomly freezes and/or resets. DVD Changer playback inoperative after bus sleep (A8 only). HD Radio does not playback in stereo. HD Radio experiences poor blending between digital and analog signals. Google Earth does not properly update the maps after leaving an area of 2G or poor cellular reception. The lower MMI display flickers when an iPod is connected and the Function or Settings menu is selected and the vehicle is stationary. Bluetooth® will not automatically reconnect to certain iPhone models after vehicle sleep. Surround settings are lost after ignition cycle (vehicles equipped with BOSE® sound systems only). This bulletin only applies to vehicles with Navigation Plus (PR Number 8DY). The applicable vehicles can be clearly identified by the SIM card slot on the faceplate of the front MMI mainunit. Continual improvements to MMI software provides solutions to issues experienced in the field.
SB-2030465/4
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2031367/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A941292 2012749-
Supersedes Technical Service Bulletin Group 94 number 11-52 dated October 11, 2011. Condensation is visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, or third brake light lens. Damp air settles on the inside of a cold lens, which creates condensation. The headlight circulation system allows air from the outside to flow through the headlights. This open waterprotected ventilation system (needed for pressure compensation) creates different climate zones in the headlight: very warm areas, where the lens is warmed up by the light, and relatively cool areas, where the lens is cooled own by the air flow. Considerable differences in humidity and temperature between the inside and the outside of the headlights, even while driving, can lead to condensation. This is especially true in cold and wet weather, but it can also happen after a car wash, after steam cleaning the engine or the front end, with overnight temperature changes, etc. This phenomenon is more visible on lenses made of clear glass than on lenses with patterns. The moisture does not affect the headlight function (light performance) and does not lead to corrosion or other damage to headlight parts.
2712152031145
Excessive Voltage DTCs present in multiple control units
4612262031135
Yellow warning light for electric parking brake on, ACC inoperative once
A461226 2031135-
The customer may state the yellow warning for electric parking brake (EPB) appeared once in the instrument cluster, but the warning turned OFF after cycling the ignition and there have been no additional occurrences. The customer may state the adaptive cruise control (ACC) was inoperative once, but resumed operating properly after cycling the ignition and there have been no additional occurrences. DTC is stored in the EPB module. Internal code Param_InterFaultID 24 or 25 may be in the extended environmental conditions. The concern is due to a software glitch in the EPB control module. Concerns related to this software glitch can only occur once. Replacing the EPB module may cause an additional occurrence.
A551226 2031273-
The movement-activated rear lid opening (also known as ? Hands-free trunk release? ) sporadically is inoperative. This feature is installed on A8 vehicles with Audi advanced key (PR No. 4I3) from CW 45/2011 production.
SB-2031273/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TSB-46-12-26
AUDI: INSTRUMENT PANEL ILLUMINATED WITH ELECTRIC PARKING BRAKE (EPB) WARNING BUT TURNED OFF WHEN IGNITION HAD CYCLED AND ADAPTIVE CRUISE CONTROL (ACC) INOPERATIVE, BUT RESUME AFTER IGNITION HAD CYCLED. MODELS 2011-2013 A4/S4, A5/S5, A5 CABRIOLET, A6, A7, A8 AND Q5. *PE
SB-7-101512
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A171232 2018550-
Supersedes Technical Service Bulletin Group 17 number 12 - 31 dated August 30, 2012. Oil consumption measurement - Repair Authorization (CA). In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine and may change significantly over the life of the engine. Typically engines with specified break-in periods consume more oil during the break-in period, and the oil consumption will stabilize after the break-in period. Refer to the Owner's Manual for specific break-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, the ambient temperature and road conditions. Additional factors are the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil.
A481232 2029282-
Supersedes Technical Service Bulletin Group 48 number 12 ? 24 dated May 8, 2012. The symbol for dynamic steering is illuminated in the instrument cluster. A DTC for overload or overuse is stored in the active steering control module (J792), address word 1B. The environmental data from the GFF log matches the example shown in the Technical Background section.
SB-2029282/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
3712692031140
Warning message in cluster, no driving mode can be selected - Faults P09140, U040400, U010300 stored in TCM
A371269 2031140-
The gearbox warning light comes on. No driving modes can be selected. The driving mode is not shown on the gear lever. Entries are logged in the memory under diagnosis address 02 (gearbox control unit). New software in the Selector Lever Control Module (J587) addressed the condition.
SB-2031140/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
3712682028561
Gearboxwarning light on - Faults P0605 and/or P17EC stored in Selector lever module 81
A371268 2028561-
Supersedes Technical Service Bulletin Group 37 number 12 ? 52 dated May 31, 2012. There is no customer complaint about the gearbox. The gear lever display flashes. The message "gearbox problem, journey can be continued with restrictions" is shown. The entry P0605 or P17EC is logged under the diagnosis address 81- Selector lever. New software in the Selector Lever Control Module (J587) addressed the condition.
SB-2028561/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A571276 2030580-
Supersedes Technical Service Bulletin Group 57 number 12 ? 68 dated August 20, 2012. The vehicle cannot be started sporadically. The yellow gearbox warning light may be illuminated. Entries are logged in the respected modules. The remote key the customer is using is transmitting incomplete immobilizer information to the vehicle; resulting in the condition.
A911263 2021151-
Supersedes Technical Service Bulletin Group 91 number 11 ? 83 dated April 15, 2011. The customer may report that the illumination of the dash insert, the air conditioning control panel or the inside light flickers when briefly pressing the accelerator in P or N or when shifting down while driving downhill. Only vehicles with PR number 8GH may be affected. When high electricity consumers are switched off and the battery is fully charged, the energy generated by the alternator is sometimes too great for the power system to absorb. This may lead to briefly increased voltage, and the lights mentioned above may briefly flicker. This characteristic is caused by the alternator design and is a normal condition of the vehicle.
SB-2030580/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
A901235 2030903-
Supersedes Technical Service Bulletin Group 90 number 12 ? 34 dated September 21, 2012. When driving, various warning lights come on, sometimes with restricted functions in the electric system. These complaints only occur together with complaints or a failure of the MMI 3G+ infotainment system. After an ignition cycle the complaint is typically gone; therefore, it may not be reproducible. Sporadic DTCs may be present for communication errors, restricted functions, or missing/incorrect messages. If the MMI 3G+ has an issue, the data bus control unit (Gateway) tries to maintain the communication to the MMI. The load on the unit is so high that other messages on the bus systems cannot be processed any more. As a remedy, modified software can be installed on the Gateway which does not communicate to the MMI 3G+ when it is unavailable.
A911262 2024323-
Supersedes Technical Service Bulletin Group 91 number 10 - 60 dated September 28, 2010. Parking aid sporadically warns of obstacles when none exist. Parking aid is inoperative or provides constant warning. Various parking aid sensor fitting issues. Environmental conditions.
SB-2030903/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
3012152030732
Red warning light for brake fluid on with no brake performance concerns -
3712662029027
Transmission warning message in cluster, P060A00 stored
3712652030007
Customer may report harsh shift concerns. No faults stored and concern is reproducible.
SB-2030960/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2030465/3
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2030846/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2030903/1
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-2030465/2
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
Pro32 VAG
Software Installation Instructions.
VAG
Software Installation Instructions.
CSC-91J1
AUDI: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION PROVIDED REGARDING NEW TECHNOLOGIES AND NEW FEATURES ON VEHICLE BY INSTALLING VIDEO TUTORIALS IN THE MMI. *PE UPDATED 9/6/12. *PE
TSB-91-12-42
AUDI: BACK UP CAMERA IMAGE IS INCORRECT OR OFF, TOO BRIGHT, TOO DARK, FUZZY, DISTORTED OR OPAQUE. MODELS AUDI Q5, Q7, A4, A5, A5 CABRIOLET (2009-14), A5, S5 (2008-14), A8 (2010-14) AND A6 (2011-14). *PE
TSB-96-12-34
AUDI: WHEN SELECTING REVERSE GEAR, THE PICTURE OF REARVIEW CAMERA FAILS TO APPEAR, SPORADICALLY. CERTAIN MODELS, CAMERA IMAGE CAN BE RE=ACTIVATED. MODEL YEARS 2008-2013. *PE
TSB-19-12-29
AUDI: EVAPORATED COOLANT SMELL IS COMING FROM ENGINE COMPARTMENT, LOSS OF COOLANT, AND WARNING LIGHT ON FOR COOLANT LEVEL. SITUATION MAY BE CAUSED BY TEE CONNECTOR HOSE LOCATED BETWEEN ALTERNATOR , COOLANT PIPE AND OIL COOLER. *PE
TSB-24-12-11
AUDI: WHEN TEMPERATURE IS BELOW 0%/C/32%F, THE MIL LIGHT FOR ENGINE, COMES ON. TO ADDRESS CONDITION, THERE IS A NEW SOFTWARE FOR ENGINE CONTROL MODEL (ECM). *PE
TSB-68-11-09
AUDI: WHEN DIFFERENT SIGNALS COINCIDE, WOULD GET AN INCORRECT DIAGNOSIS OF REVERSIBLE BELT TENSIONER. *PE
TSB-69-11-20
AUDI: SOME MODEL YEAR VEHICLES MUST HAVE THE SERVICE PART FOR THE AIRBAG CONTROL UNIT CODED AND/OR PARAMETER USING SVM CODE LISTED IN ETKA. MODELS A4, S4, A5, S5, Q5, TT, TTS, A3, PA , C6, A6 PA, D4, A8,C7 A7. *PE
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.