A4623402069078_1
Service Bulletin/Repair Instructions
This bulletin contains instructions for when the zirconium inserts found to be not firmly attached during service work.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
A4623402069078_1
This bulletin contains instructions for when the zirconium inserts found to be not firmly attached during service work.
DC_RECALLS
SAFETY RECALLS, COMPLIANCE RECALLS and STOP SALES
A442292202256321
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A6922792065962_1
This bulletin advises on identifying when a foreign object has obstructed normal operation of the seat belt.
A4021302023187_6
This information bulletin provides an explanation for squeaking noises heard when the steering wheel is turned or maneuvered.
A002155201173212
This bulletin contains general instructions for software updates.
A0021482021205_6
This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
ELSAallignAudi
Elsa2Go campaign information is now 100% aligned with ElsaPro. This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time without any discrepancy.
A4421802056386_4
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
21AUTIRECHAINS
Added new graphic to reflect where to find MY 21 information
A9120702044694_2
This technical service bulletin provides troubleshooting for issues with the navigation map database.
TT 91 18 06
Apple car play function.
A9020442032113_3
This information bulletin contains a background on the outside air temperature reading.
A0020362002047_1
This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
A5120132009967_1
This bulletin contains instructions for vehicle inspection, protection removal, and detailing.
A4420732056386_3
This bulletin contains instructions for when the vehicle pulls to one side or the steering wheel is crooked.
20AUTIRECHAINS
New document 2004-2020 A4 allroad, A6 allroad, A8L, R8 Spyder
145320381292
A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
A9119932037087_4
This bulletin contains instructions for enabling text message notifications through the MMI system.
A0019252011732_1
00 Software Version Management (SVM), operating instructions
A4819782053869_2
This bulletin contains repair instructions for when DTC B145504 with symptom code 7340800. This document applies to every 2016-2019 Audi Model.
A481977 2053869-
This bulletin contains repair instructions for when DTC B145504 with symptom code 7340800.
A201911 2043357
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
A911929 2053598
This bulletin contains instructions for MIB2 Standard on how to update the MMI.
A921916 2038151
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A441969 2022563
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A461903 2034181
This technical service bulletin provides troubleshooting for brake noise.
A001915 2047812
This informational bulletin contains instructions for setting up and using the SD creator program.
A011900 2046724
This bulletin contains a software update to address occasional stalling or running erratically without a DTC. Occasional "System too rich" entries.
A011996 2046611
This bulletin provides repair instructions for when DTC P209600 and DTC P209800 appear and the reference duct is contaminated.
A171894 2048392-
This bulletin contains software update ifnormation for when the instrument cluster display shows ?Please reduce oil level.?
SM 91-2018
The part numbers listed in the document are to be returned if they meet the criteria provided.
A911801 2042942-
This bulletin contains instructions for when the Audi connect Gen 2 system is not functioning and there is a "Please wait.." message.
A011873
This bulletin contains a software update to address occasional stalling or running erratically without a DTC. Occasional "System too rich" entries.
Emissions Recall
3.0 TDI vehicles were equipped with undisclosed Auxiliary Emission Control Devices which are not permitted by emissions regulations. Removed California DMV Tie-in Requirements
A011868
This bulletin contains a software update to correct a MIL on with DTC P033300, P132200, P132400, and/or P032800.
Email-Audi AEM T
Important Information Regarding Approved Emissions Modification (TDI) Recall Campaigns & the California Air Resources Board / Department of Motor Vehicle (DMV) Vehicle Registration Requirement
A011854 2046724_
This bulletin contains a software update to address occasional stalling or running erratically without a DTC. Occasional "System too rich" entries.
Circular-Emissio
3.0 TDI vehicles were equipped with undisclosed Auxiliary Emission Control Devices which are not permitted by emissions regulations. Revised legal approved copy.
Campaign Parts B
This is a communication on the targeted allocation process.
Booklet - 3.0L T
3.0L TDI Gen 2-PC_Booklet
Customer Letter
3.0L TDI Gen 2-PC_Customer letter
E-mail 3.0L TDI
E-mail - 3.0L TDI Gen 2 Emissions Compliant Repair (ECR) Approval
A011747 2048411
This bulletin contains repair instructions for when a 4.0 liter engine has a MIL on, the engine may be limited to 4,000rpm, and there are DTCs about the intake manifold flap adjustment.
Scheduled Mainte
Major Maintenance Section: CHANGED: "(except Audi A3 e-tron)" to (Audi A3 etron only)" at the end of "Cooling system for electrical components: Check coolant level according to description in ElsaPro" ADDED: "(except A3 e-tron)" at the end of "Cooling system - Check coolant level and add coolant if necessary"
A011744 2049153
This bulletin contains continued instructions after completing 2041097.
A011735 2048391-
This bulletin contains a software update to correct a MIL on withDTC P033300 and/or P032800.
A511711 2009967-
This bulletin contains instructions for vehicle inspection, protection removal, and detailing.
A911743 2042097-
This informational bulletin contains resource information for when the traffic feature is inoperative in the MMI navigation.
A661762 2038477-
This technical service bulletin provides instructions for the lubricating rear spoiler drive unit.
A201795 2043357-
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
A941791 2012749-
This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
A911737 2047576-
This is a reference bulletin that contains software update information for the MID2 MMI system.
A911736 2024323-
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A201794 2043357-
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
A011727 2048411-
This bulletin contains repair instructions for when a 4.0 liter engine has a MIL on, the engine may be limited to 4,000rpm, and there are DTCs about the intake manifold flap adjustment.
A191789 2046712-
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant expansion tank cap.
A401770 2018194-
This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
SM 44-2017 EN
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
A441764 2022563-
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A171782 2010043-
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
A301722 2019850-
This technical service bulletin provides guidelines for diagnosing the clutch plate.
A011714 2045909-
This bulletin provides a software update for misfiring cylinders.
A911723 2047433-
This bulletin contains software update information for when retrieving the stored myAudi destinations, the myAudi PIN is not saved.
A911722 2047407-
This bulletin contains a software update for when the audio is muted after using the front, rear, or top-view camera system.
A011706 2046724
This bulletin contains a software update to address occasional stalling or running erratically without a DTC. Occasional "System too rich" entries.
A201788 2043357-
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
A191784 2045456-
This is an information bulletin regarding procedure for when the technician finds coolant marks during a repair.
A191782 2036167-
This bulletin provides instructions for a slow coolant leak from coolant connections.
ATE-17-05
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
A211725 2046724-
This bulletin contains a software update to address occasional stalling or running erratically without a DTC. Occasional "System too rich" entries.
Bulletin - Updat
Update ECM software to improve diagnostic of NVLD system. Bulletin revised to update claiming instructions.
Bulletin-Dealer
Update ECM software to improve diagnostic of NVLD system.
A191777 2046712-
This informational bulletin contains guidelines for figuring out why coolant marks are present around the coolant expansion tank cap.
A211724 2044640-
This bulletin contains detailed instructions and a worksheet for determining the damage on a turbocharger.
A201785 2043357-
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
2016 Audi Tire C
3.0T R18 235/55 R19 104H Winter Wheel and Tire pkg changed to R19 235/55 R19 104H Winter Wheel and Tire pkg
A011797 2046232-
This bulletin provides a SVM code update for in Engine Control Module.
A011798 2045909-
This bulletin provides a software update for misfiring cylinders.
A201784 2043357-
This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.
A921614 2038151-
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A871679 2041717-
This bulletin applies to any repair that requires replacement of the air conditioning compressor and details how to run a ODIS GFF test plan.
A441662 2010334-
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
A441663 2022563-
This bulletin provides information regarding vibrations or movement that are felt in the wheel.
A921613 2038151-
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A921612 2038151-
This bulletin provides instructions for repairing a vehicle with a washer solvent light on but the level is correct.
A001684 2037949-
This technical bulletin provides instructions for an an error message and updating with an SVM code.
24CO
ON CERTAIN AUDI VEHICLES WITH A 3.0L TFSI ENGINE MANUFACTURED DURING A SPECIFIC PERIOD, THE DIAGNOSTIC THRESHOLDS FOR THE CATALYTIC CONVERTERS WERE PROGRAMMED TOO TIGHTLY IN THE ENGINE CONTROL UNIT. AS A RESULT, THE MALFUNCTION INDICATOR LIGHT (MIL) MAY COME ON EVEN THOUGH THE CATALYTIC CONVERTERS ARE WORKING PROPERLY. IF THE MIL IS ON, A VEHICLE WILL NOT PASS AN EMISSIONS INSPECTION.
A66165620384772
THIS TECHNICAL SERVICE BULLETIN PROVIDES INSTRUCTIONS FOR THE LUBRICATING REAR SPOILER DRIVE UNIT.
A4416612034445
THIS TECHNICAL SERVICE BULLETIN NOTIFIES THE READER THAT IF THE TPMS MESSAGE APPEARS BRIEFLY AFTER THE ENGINE IS STARTED AND THEN DISAPPEARS, IT DOES NOT INDICATE AN ISSUE WITH THE TPMS SYSTEM.
A96160720295633
THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE.
A20166920441821
THIS TECHNICAL SERVICE BULLETIN IS REPAIR AUTHORIZATION FOR ISSUES WITH FUELING THE VEHICLE.
A96160620295632
THIS TECHNICAL SERVICE BULLETIN EXPLAINS POSSIBLE CAUSES FOR THE REARVIEW CAMERA TO NOT DISPLAY AN IMAGE.
A94167720439181
THIS TECHNICAL SERVICE BULLETIN INSTRUCTS THE READER TO RECEIVE DIAGNOSIS OR AUTHORIZATION FROM THE TECHNICAL ASSISTANCE CENTER BEFORE REPAIRING AN ISSUE WITH THE SIDE MIRROR TURN SIGNAL.
A91163620419402
THIS TECHNICAL SERVICE BULLETIN EXPLAINS HOW TO DIAGNOSE AN ISSUE WITH THE SATELLITE RADIO ANTENNA AND HOW TO UPDATE THE SOFTWARE.
Tire Chain Info
This document contains Audi tire chain information by vehicle. Snow chains must not be used on the compact spare wheel. Provided the subject tires can accommodate snow chains, such chains can be used only on the front wheels if the vehicle is equipped with front wheel drive. Provided the subject tires can accommodate snow chains, such chains can be used on the front and rear wheels if the vehicle is equipped with Quattro. Ultra-high performance tires are not suited for use on ice or snow. Part numbers are for reference only.
A151627 2043735-
The MIL is on due to DTCs for cam shift actuator "A" or "B" cylinder range/ performance beings stored in the ECM. Customer complains of occasional poor performance and that cruise control does not always work. Malfunction of the camshaft adjuster of the Audi valvelift system.
A171668 2038119-
The message "Oil minimum warning, add one quart of oil" appears in the instrument cluster, but the oil level is above the minimum level. There are no DTCs related to oil level stored in the ECM memory. The oil level sensor is defective.
A961604 2042811-
Audi connect Gen1 and Gen2 systems: Differences and troubleshooting. The customer has a general concern related to Audi connect. Different features are included with different generations of the Audi connect system. The Audi connect Gen1 system includes all vehicles that utilize a removable plastic SIM card. The Audi connect Gen2 system includes all vehicles that utilize an embedded SIM card. The root cause of all complaints cannot be attributed to the vehicle hardware because of the backend server configurations that need to be correct in order for Audi connect to work. For most sporadic complaints, the issue typically resides with the MBB backend server or with the source data provider (Google, INRIX, etc.), and not with the vehicle. In rare cases, the mobile network operator (AT&T, T-Mobile) can be the cause of the complaint. For most static complaints, the issue can be attributed to the user account subscription or possibly the vehicle hardware.
A191666 2043142-
The MIL is sporadically on. One or more of the following DTCs is stored in the engine control module (ECM, J623 (address word 01). They are DTC P261A00 (Coolant Pump ?B? Control Circuit/Open), DTC P261B00 (Coolant Pump ?B? Control Circuit Range/Performance), and DTC P261C00 (Coolant Pump ?B? Control Circuit Low). The continued coolant circulation pump sporadically fails.
A201658 2042166-
MIL on (DTC P045600 - EVAP system leak detected NVLD (very small leak)) - Repair Authorization. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected.
A201557 2042166-
Supersedes Technical Service Bulletin Group 20 number 15-53 dated October 29, 2015. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
A201553 2042166-
Supersedes Technical Service Bulletin Group 20 number 15-51 dated October 28, 2015. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
A201551 2042166-
Supersedes Technical Service Bulletin Group 20 number 15-49 dated October 15, 2015. The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts.
A201549 2042166-
The MIL is on. DTC P045600 (EVAP System Leak Detected NVLD (very small leak)) is stored in the engine control module (ECM), J623 (address word 01). Drivability is not affected. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts. This will assist us in diagnosing any potential issues with the condition noted above.
PDI - 2016 A5 Co
This document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. ALL PDI function tests must be run in Guided Fault Finding (GFF) only. Do NOT use Guided Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS Diagnosis for using GFF for PDI function tests. It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.
A871567 2041717-
Customer may report poor performance of A/C system or that the A/C system is inoperative. Any replacement of A/C compressors must include an ODIS GFF test plan confirming a malfunction of the A/C system with documentation of the recovered refrigerant volume.
2016 Audi 7-28-1
This document contains the Audi maintenance schedule. The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.
PDI - 2016 Audi
This document contains the pre-delivery inspection technician reference document. The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with the Pre-Delivery Inspection Checklist (PDI). The PDI Checklist has been simplified to make the process more efficient, and in doing so, this document has been created to be used as a reference for checklist items that may have additional information. On the PDI Checklist, you find that certain items have been notated with an asterisk symbol (*), this lets you know that additional information can be found in this Technician Reference Document. This document is in Spanish.
Tech Ref 7-22-15
This document contains the pre-delivery inspection technician reference document. The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with the Pre-Delivery Inspection Checklist (PDI). The PDI Checklist has been simplified to make the process more efficient, and in doing so, this document has been created to be used as a reference for checklist items that may have additional information. On the PDI Checklist, you find that certain items have been notated with an asterisk symbol (*), this lets you know that additional information can be found in this Technician Reference Document.
A7-S7 7-20-15
This document contains the Audi delivery guidelines checklist.
A5-S5-RS5 7-17-1
This document contains the Audi delivery guidelines checklist.
A5-S5-RS5 7-17-2
This document contains the Audi pre-delivery inspection checklist. All items must be completed prior to customer delivery by an Audi technician. Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection. Refer to the Special functions tab of ODIS Diagnosis using GFF for the PDI function tests. It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF and also to ensure SVM sees all control units during the SVM check vehicle configuration. For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information.
PDI - 2016 A5-S5
This document contains the Audi delivery guidelines checklist. This document is in Spanish.
A1915612025303-5
Supersedes Technical Service Bulletin Group 19 number 14-50 dated June 20, 2014. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
A301519 2019850-
Supersedes Technical Service Bulletin Group 30 number 11-10 dated December 2, 2011. Clutch is not operating properly. Clutch has a burnt smell. Clutch pedal does not fully return to starting position. Incorrect shifting, the revolutions of clutch plate and engine input shaft differ too much, excessive slipping of the clutch, and when the clutch is pressed and an incorrect lower gear is selected, can result in clutch damage.
A461516 2034143-
Supersedes Technical Service Bulletin Group 46 number 14-85 dated July 14, 2014. A TAC ticket must be opened for any repairs related to the ceramic brakes. Various parts have been replaced under warranty for the condition noted above, but no issues were identified with these parts. In an effort to gain information, we are asking that you contact the Audi Technical Assistance Center (TAC) before replacing any parts.
A911598 2018187-
Supersedes Technical Service Bulletin Group 91 number 14-50 dated July 10, 2014. Customer may report that cracking, grinding, rattling, humming, whining, or similar interference is coming from one or more speakers. Parts of the speakers (such as the brackets, cables, or covers) or parts of the interior fittings (such as door covers, rear shelf, facings, or covers) can vibrate at certain frequencies, causing noises. The radio tuner or other control modules may be affected by electromagnetic interference from aftermarket electronic devices.
A871564 2010146-
Supersedes Technical Service Bulletin Group 87 number 15-63 dated May 18, 2015. There is an unpleasant, musty odor coming from the heating and ventilation system. The odor usually occurs when the vehicle has been sitting unused for five hours or more. The odor usually occurs within 20 to 60 seconds after the vehicle is started. Condensation, which is a normal condition in all A/C systems, can cause a musty odor.
A911595 2040926-
The navigation map update database 8R0051884CJ cannot be activated using Software Version Management.
A171563 2038129-
Supersedes Technical Service Bulletin Group 17 number 14-53 dated November 7, 2014. A check with the engine oil service dipstick T40178 is necessary, but the adjustment values for the dipstick are not available in the Elsa repair manual. Because of a system change, the adjustment values for the service dipstick T40178 were removed from the repair manual.
Normal Load Cond
This document contains the normal load condition tire pressure table. This document is in Spanish.
A911588 2026390-
When a phonebook with a large number of contacts is being downloaded, the MMI screen freezes Briefly after the initial Bluetooth connection (shortly after the phone is bonded to the vehicle), after the ignition is switched on (shortly after the phone automatically reconnects with the vehicle), and after the phonebook has downloaded. When the voice recognition system is used, a message appears in the MMI screen stating that the phone book is too large and that the voice recognition system cannot be used. When music is streamed to the MMI system with the Bluetooth A2DP connection, the music intermittently pauses or seems to skip. The condition goes away once the phonebook transfer is completed. The MMI uses a limited portion of the total memory to convert the name and phone number fields of downloaded contacts into a voice command (text to speech). Extensive processing takes place if too many letters are used in the first and last name fields or if numbers or special characters are entered. The remaining memory is dynamically assigned to different applications which can also affect the capacity of the voice command processing. The MMI does not respond until the process is completed or it may freeze if phonebook fields are too large or do not follow typical formatting. In addition, the text-to-speech capacity is exceeded and the voice recognition system is rendered inactive.
A911578 2011500-
Supersedes Technical Service Bulletin Group 91 number 08-129 dated November 12, 2008. Customer states that the reception of satellite radio occasionally fades or drops out. The information display may show a message related to the satellite radio, such as "Linking", "Updating", "Acquiring Signal", "Loading", "No Signal", or "No Sat".
PDI - 2016 A6 A7
This document contains the pre-delivery inspection technician reference document. The Pre-Delivery Inspection Technician Reference Document is designed to be a resource used in hand with the Pre-Delivery Inspection Checklist (PDI). The PDI Checklist has been simplified to make the process more efficient, and in doing so, this document has been created to be used as a reference for checklist items that may have additional information. On the PDI Checklist, you find that certain items have been notated with an asterisk symbol (*), this lets you know that additional information can be found in this Technician Reference Document.
PDI - 2016 ALL M
This document contains the Audi vehicle detail report checklist. DO NOT use accessories (radio, etc.) while performing detail, as this can discharge the battery. Refer to TSB 2009967 for Detailer responsibilities, specific use of chemicals, and for part numbers to order materials. Only operate power convertible top with engine running to conserve battery power (A5/S5 Cab, R8 ONLY). DO NOT allow convertible top to remain in a partially opened or partially closed position for longer than 5 minutes. This will cause the top to stop functioning and will require service (A5/S5 Cab, R8 ONLY). DO NOT treat vehicle parts painted with matte finish paint using polishing materials or hard wax. NEVER use protective wax. It can destroy the matte finish effect. Only use a microfiber cloth for cleaning (R8 ONLY).
Edition117
Product quality is Announcing a new innovation in technical service bulletins: portable, easy to access videos
00147020392061
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Edition112
Technical bulletins and updates
Edition110
Technical bulletins and updates
149120288422
Customer vehicle is fitted with unauthorized ECM tuning.
A001467 2002047-
Supersedes Technical Service Bulletin Group 00 number 14-61 dated May 1, 2014. Technician preparation when calling the Audi Technical Assistance Center (TAC).
00146620379491
A DTC with the description ?Invalid Data Record? is stored after an ECU has been replaced or updated.
Edition96
Technical bulletins and updates
001465201173210
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
A001465 2011732-
Supersedes Technical Service Bulletin Group 00 number 12-32 dated February 7, 2012. This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
A461486 2022584-
Brake-related vibration and pulsation has several causes that depend on driving style and resulting brake disc temperature, as well as environmental conditions. Both the intensity of the wear of the brake system and the type of wear depend on the operating conditions of the vehicle. The wear of the brake discs is determined by the frequency and intensity of the brake operations. Dirt build-up, exposure to sand, long standing times, and road salt or similar, can also promote wear as well as cause scoring marks on the brake discs. The driving style of the driver also influences the wear of the brake system. An overly-aggressive driving style, which results in frequent sharp braking, can lead to more wear (particularly of the brake pads). A gentle driving style can result in very light brake applications. If the brakes are always applied with little pressure, a rust film and other airborne particles may settle on the brake discs and pads. Firm brake operations can help clean off such build-up from the brakes.
A191450 2025303-
Supersedes Technical Service Bulletin Group 19 number 13-41 dated June 20, 2013. Discontinuation and mixing of Audi-approved engine coolants. G11, G12, and G12+ coolants have been replaced by an improved version. G12++ coolant (for service available) has been introduced in MY 2005 for all engines. G13 has been introduced in MY 2008 as factory filling and service.
Edition89
ElsaPro Software update and technical bulletins
00146320335762
Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
37 14 30 2003658
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
37143020036586
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
A001463 2033576-
Supersedes Technical Service Bulletin Group 00 number 13-49 dated May 14, 2013. Although the correct amount of oil was added to the engine during an oil change service, a check of the oil level shows that the oil level is not okay. When an unapproved aftermarket speed-filling device is used to add oil to the engine, the increased oil flow rate may force oil into the intake manifold or combustion chamber, creating the potential for engine damage.
A371430 2003658-
Supersedes Technical Service Bulletin Group 37 number 13-07 dated May 29, 2013. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off). No DTCs are stored. This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition.
A641433 2029714-
Supersedes Technical Service Bulletin Group 64 number 12-22 dated July 5, 2012. After one or both of the front door control units (J386/J387) is replaced, one or both of the rear door control units (J3888/J389) cannot be coded or parameterized via an SVM specified vs. actual comparison (spec/actual). The parameter data in the software coding container has changed for the front and rear door control units. As a result, an SVM code is required to update the parameter data for any replacement control unit. Simply running an SVM spec/actual will not code nor update the parameter data in the new replacement control unit. A hardware change suggestion will be provided when an SVM spec/actual is executed. An additional hardware replacement is not required.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.