A0023742052680_4
Service Bulletin/Repair Instructions
This bulletin provides information on the additional reporting requirements for safety related inquiries.
Vehicle report
2007 AUDI S8
Service bulletins
132 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
A402352202431813
Service Bulletin/Repair Instructions
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
DC_Alternator_6
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator_4
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator_5
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator_3
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator_2
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_Alternator
Service Bulletin/Repair Instructions
Support for Customers Affected by Alternator Back-order
DC_RECALLS
Service Bulletin/Repair Instructions
SAFETY RECALLS, COMPLIANCE RECALLS and STOP SALES
A9122192067783_1
Service Bulletin/Repair Instructions
This bulletin provides information about obtaining a radio code using ODIS.
A402238202431812
Service Bulletin/Repair Instructions
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
A402237202431811
Service Bulletin/Repair Instructions
This bulletin describes the proper procedure to address a clicking or clacking noise from the wheel bearing
DC_20220329
Service Bulletin/Repair Instructions
Dealer Communication: Vehicle Sales Reporting, Reinstatement, and Audit Policy
A1722172060750_3
Service Bulletin/Repair Instructions
This bulletin contains instructions for using the UV additive to find engine oil leaks.
A9122752024323_9
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A462226202258411
Service Bulletin/Repair Instructions
This informational bulletin provides diagnostic information for brake conditions.
A192228202530313
Service Bulletin/Repair Instructions
This bulletin contains instructions for identifying and mixing factory fill coolants.
A192227202530312
Service Bulletin/Repair Instructions
This bulletin contains instructions for identifying and mixing factory fill coolants.
A4021312024318_1
Service Bulletin/Repair Instructions
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
A002155201173212
Service Bulletin/Repair Instructions
This bulletin contains general instructions for software updates.
DC 20210928
Service Bulletin/Repair Instructions
Dealer Communication - Vehicle Sales Reporting, Reinstatement, and Audit Policy Update - Effective September 30, 2021
A9121342018187_1
Service Bulletin/Repair Instructions
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
A0021482021205_6
Service Bulletin/Repair Instructions
This informational bulletin explains how to order replacement VIN plates, Safety Certification Labels, etc.
A9121042024323_8
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A0021442052680_3
Service Bulletin/Repair Instructions
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage).
A1021222018288_9
Service Bulletin/Repair Instructions
This technical service bulletin reminds the reader to check for metal debris when replacing an engine.
A9021032058077_5
Service Bulletin/Repair Instructions
This bulletin contains instructions for determining unexpected Audi presense interventions.
ELSAallignAudi
Service Bulletin/Repair Instructions
Elsa2Go campaign information is now 100% aligned with ElsaPro. This update to Elsa2Go ensures that both systems are displaying the same campaign information, including OPEN/CLOSED status, repair date as well as criterions at the same time without any discrepancy.
A4021242016453_4
Service Bulletin/Repair Instructions
This bulletin contains instructions for determining if bushings need to be replaced.
A5721752022032_9
Service Bulletin/Repair Instructions
This technical service bulletin provides troubleshooting information for the vehicle locking system.
A9121862062713_1
Service Bulletin/Repair Instructions
This bulletin contains repair instructions for when there is radio static when the rear heater is active.
A4621252054385_2
Service Bulletin/Repair Instructions
This informational contains an explanation for when the customer hears creaking noises when braking at almost standstill (crawling when pulling away or briefly before standstill).
A462123202258410
Service Bulletin/Repair Instructions
This informational bulletin provides diagnostic information for brake conditions.
A1721122060750_2
Service Bulletin/Repair Instructions
This bulletin contains instructions for using the UV additive to find engine oil leaks.
A9121642024323_7
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
SM C-2020
Service Bulletin/Repair Instructions
This special notice is to inform dealers to return the part numbers listed (State of California only).
A1720112060750_1
Service Bulletin/Repair Instructions
This bulletin contains instructions for using the UV additive to find engine oil leaks.
21AUTIRECHAINS
Service Bulletin/Repair Instructions
Added new graphic to reflect where to find MY 21 information
Audi Part Labels
Service Bulletin/Repair Instructions
Recall Reminder Part Labels
A1720062028440_5
Service Bulletin/Repair Instructions
This informational bulletin explains when the range display is empty in the on-board computer.
A1920042025303_1
Service Bulletin/Repair Instructions
This bulletin contains instructions for identifying and mixing factory fill coolants.
A0020382039206_3
Service Bulletin/Repair Instructions
This informational bulletin contains instructions on how to use the QR code in a TSB.
A9120702044694_2
Service Bulletin/Repair Instructions
This technical service bulletin provides troubleshooting for issues with the navigation map database.
A4020052024318_9
Service Bulletin/Repair Instructions
This technical service bulletin provides instructions for correcting a clicking sound from the wheel bearing(s).
A0020362002047_1
Service Bulletin/Repair Instructions
This information bulletin contains instructions for technicans on how to ensure their TAC call goes smoothly.
A012054201475311
Service Bulletin/Repair Instructions
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A012046201475310
Service Bulletin/Repair Instructions
This bulletin contains instructions for when to add gasoline additives for cleaning the injectors.
A912039201818711
Service Bulletin/Repair Instructions
This bulletin contains inspection guidelines for radio interference that causes noises in the speaker.
A9419182012749_1
Service Bulletin/Repair Instructions
Exterior lights, moisture accumulation 2013-2021 A3 Cabriolet, 2016-2018 Sportback, 2004-2005 A4 Cabriolet, 2004-2008 S4 Cabriolet, 2008 RS4 Cabriolet, 2010-2021 A4 allroad, 2018-2021 A5 Sportback, 2010-2012, 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2004-2006 A7, 2004-2011 S7, 2021 RS6 Avant, 2004-2006 S8
20AUTIRECHAINS
Service Bulletin/Repair Instructions
New document 2004-2020 A4 allroad, A6 allroad, A8L, R8 Spyder
A4019972018194_9
Service Bulletin/Repair Instructions
This bulletin contains repair instructions for leaking shock absorbers.
A0019262052680_2
Service Bulletin/Repair Instructions
This bulletin contains instructions for additional reporting requirements for safety related inquiries (airbag/seatbelts, accidents, fire and overheat damage.
A0019252011732_1
Service Bulletin/Repair Instructions
00 Software Version Management (SVM), operating instructions
A9119882024323_6
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A1719982028440_4
Service Bulletin/Repair Instructions
This informational bulletin explains when the range display is empty in the on-board computer. Also A3 Cabriolet 2015-2021, A3 Sportback 2016-2018, 2005 A4 Cabriolet , 2005-2009 S4 Cabriolet, 2010-2012 and 2018-2021 RS5 Cabriolet, 2018-2021 S5 Sportback, 2021 S6, 2005 and 2006 A7, 2005-2011 and 2021 S7 2005-2006 and 2021 S8, 2019-2021 E-Tron Quattro
A911743 2042097-
Service Bulletin/Repair Instructions
This informational bulletin contains resource information for when the traffic feature is inoperative in the MMI navigation.
A941791 2012749-
Service Bulletin/Repair Instructions
This informational bulletin contains technical information for when there is condensation visible on the inside of the headlight, taillight, fog light, side marker light, front turn signal, daytime running lights, and/or third brake light lens.
A911736 2024323-
Service Bulletin/Repair Instructions
This bulletin contains technical information regarding when the parking aid sporadically warns of obstacles that don't exist or it is inoperative/constant warning.
A401770 2018194-
Service Bulletin/Repair Instructions
This informational bulletin contains knowledge on why oil may appear on one or several of the shock absorbers.
SM 44-2017 EN
Service Bulletin/Repair Instructions
This special notice is to inform dealers to return all part numbers listed in the document and order the superseded part numbers going forward.
A171782 2010043-
Service Bulletin/Repair Instructions
This informational bulletin contains all the the Audi Oil Quality Standards that should be used when doing an oil change.
Edition76
Service Bulletin/Repair Instructions
Technical bulletins and updates
ATE-17-05
Service Bulletin/Repair Instructions
Due to increasing requests for high voltage personal protective equipment (HVE PPE) for dealer technicians working with high voltage vehicles (Hybrid, Plugin Hybrid, Electric Vehicle), the Volkswagen Tools and Equipment Team has identified two US based suppliers to support dealers in USA and Canada.
A441662 2010334-
Service Bulletin/Repair Instructions
This information TSB provides information regarding the correct way to torque adjust a wheel bolt.
SB-01-15-29
Service Bulletin/Repair Instructions
AUDI: ENGINE, ON SOME VEHICLES, WOULD RUN IRREGULARLY OR HAVE MALFUNCTION INDICATOR LAMP (MIL) ON OR POSSIBLE FILTER ELEMENT FOR CAMSHAFT ADJUSTMENT VALVE CAN LOOSEN AND IN OIL CIRCUIT, THERE IS NO DAMAGE FROM LOOSENED PARTICLES. MODEL ALL. ALL YEARS. *PE
00147020392061
Service Bulletin/Repair Instructions
High quality media files (video and sound) are now integrated into technical service bulletins on a case-by-case basis. Media files can now be viewed on any smartphone or tablet.
Edition112
Service Bulletin/Repair Instructions
Technical bulletins and updates
Edition110
Service Bulletin/Repair Instructions
Technical bulletins and updates
44145520103346
Service Bulletin/Repair Instructions
Tightening wheel bolts
48146320282204
Service Bulletin/Repair Instructions
Steering wheel leather damage, all vehicles
Edition106
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
Edition102
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
Edition96
Service Bulletin/Repair Instructions
Technical bulletins and updates
Edition96-1
Service Bulletin/Repair Instructions
i-wire new wiring diagram application
001465201173210
Service Bulletin/Repair Instructions
This Technical Service Bulletin (TSB) details the general process for carrying out a Software Version Management (SVM) software update for any TSB or Update.
46148620225845
Service Bulletin/Repair Instructions
Brake pulsation diagnostic guidelines
AUD4927ENG
Service Bulletin/Repair Instructions
Due to new Minnesota state regulations regarding biofuels, biodiesel blends of B5 or less may not be available in the State of Minnesota.
4014412018194
Service Bulletin/Repair Instructions
Shock absorber leaks: assessment aid
40144120181946
Service Bulletin/Repair Instructions
Shock absorber leaks: assessment aid
Edition92
Service Bulletin/Repair Instructions
Idenifying and mixing factory fill engine coolants
Edition89
Service Bulletin/Repair Instructions
ElsaPro Software update and technical bulletins
37 14 31 2013002
Service Bulletin/Repair Instructions
As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak. Automatic transmission fluid is leaking at the sump pan gasket.
37143120130025
Service Bulletin/Repair Instructions
ATF pan leaks
A371431 2013002-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 37 number 11-19 dated January 31, 2011. Automatic transmission fluid is leaking at the sump pan gasket. As the sump pan gasket settles, the torque of the bolts decreases and the seal may leak.
37 13 07 2033658
Service Bulletin/Repair Instructions
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
37 14 30 2003658
Service Bulletin/Repair Instructions
This condition may be caused when the brake pedal and the accelerator pedal are depressed simultaneously. Drivers who drive with their left foot resting on the brake pedal are prone to experience this condition. With the introduction of Electronic Power Control (EPC) (no accelerator cable) to fuel injection systems, an engine RPM control feature has been incorporated into the engine electronic control system software. Customer states that the engine returns to idle speed of approximately 1,400 RPM although the accelerator is depressed, and/or the vehicle hesitates (lacks power on take-off).
37143020036586
Service Bulletin/Repair Instructions
Vehicle lacks power or will not move after stop due to simultaneous depressing of the brake and accelerator pedals
Update91i8
Service Bulletin/Repair Instructions
Google Maps Street View (NVLW))
144920284402
Service Bulletin/Repair Instructions
The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle range (?distance to empty?) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 (address word 17). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on-board computer.
Edition79
Service Bulletin/Repair Instructions
Technical bulletins and updates
Edition77
Service Bulletin/Repair Instructions
Technical bulletins and updates
Edition69
Service Bulletin/Repair Instructions
Technical bulletins and updates
01145720151069
Service Bulletin/Repair Instructions
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
01135020301922
Service Bulletin/Repair Instructions
A deformed oil seal behind the potentiometer (Figure 1) causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs.
A011350 2030192-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 12-55 dated October 22, 2012. MIL on. DTCs are stored in the engine control module (ECM). Engine may have reduced power without significant loss of power or stalling. A deformed oil seal behind the potentiometer causes a linkage of the intake manifold flap adjustment to stick, which sets the DTCs. When the potentiometer is removed, the oil seal can be seen.
44134620103345
Service Bulletin/Repair Instructions
Tightening wheel bolts
TSB-44-13-46
Service Bulletin/Repair Instructions
AUDI: ON CERTAIN VEHICLES, USE CALIBRATED TORQUE WRENCH AND NOT TORQUE STICKS, TORQUE EXTENSION BARS AND IMPACT GUNS/WRENCHES NOT APPROVED FOR USAGE ON WHEEL BOLTS BY MANUFACTURER, THAT CAN CAUSE DAMAGE TO BRAKE, STEERING WHEEL, HUB. MODEL 1995-2014 ALL. *PE
9113142013790 8
Service Bulletin/Repair Instructions
The navigation DVD or other CD/DVD cannot be ejected.
Reference-Oil Ca
Service Bulletin/Repair Instructions
This document contains the Audi oil capacity chart.
Edition58
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
27 13 19 2029010
Service Bulletin/Repair Instructions
Low battery charge: excess current draw location
Chart
Service Bulletin/Repair Instructions
Audi Oil Capacity Chart
4013342018194
Service Bulletin/Repair Instructions
Shock absorber leaks: assessment aid
40133420181945
Service Bulletin/Repair Instructions
Shock absorber leaks: assessment aid
Edition53
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
131020182884
Service Bulletin/Repair Instructions
If the vehicle?s engine experienced a serious mechanical problem, it is possible that small pieces of metal debris resulting from the mechanical problem may have become deposited in the intake manifold, air intake hoses, exhaust manifolds, exhaust down-pipes, turbocharger, supercharger, and/or intercooler. If these pieces are not removed prior to the installation and operation of the replacement engine, the pieces may be drawn into the combustion chamber, which can cause a knocking noise and subsequent serious engine damage.
Edition46
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
Edition45
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
Edition42
Service Bulletin/Repair Instructions
Audi Elsa Newsletter
01130920147538
Service Bulletin/Repair Instructions
The use of contaminated gasoline or gasoline with a low content of deposit control additives may result in one or more conditions.
37-13-07
Service Bulletin/Repair Instructions
AUDI: SOME VEHICLES MAY LACK POWER OR WILL NOT MOVE AFTER STOP DUE TO SIMULTANEOUSLY DEPRESSING THE BRAKE AND ACCELERATOR PEDALS. *JS
0113692028344
Service Bulletin/Repair Instructions
Idle speed characteristic during cold start
A011369 2028344-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 12-57 dated October 29, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300°C (572°F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperatures of the exhaust gas and of the catalyst increase quickly. The afterburning in the exhaust manifold before the catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase, the engine has increased idle speed, may have increased vibrations, and has a different sound characteristic. Depending on conditions, the time of the catalyst heating phase varies.
1335201004313
Service Bulletin/Repair Instructions
Engine oils that meet Audi Oil Quality Standards.
0112572028344
Service Bulletin/Repair Instructions
Idle speed characteristic during cold start
A011257 2028344-
Service Bulletin/Repair Instructions
Supersedes Technical Service Bulletin Group 01 number 12-51 dated July 18, 2012. Noises/inconsistent engine operation after cold start during the catalyst heating phase. The customer may interpret this engine roughness as misfiring. To comply with the legal requirements on exhaust gas emissions according to the LEV-1 and LEV-2 standards, a high exhaust gas quality must be ensured. The necessary catalyst only operates at a temperature over 300°C (572°F). To achieve this, the catalyst is heated up. The catalyst heating phase is achieved by a late ignition angles and by introducing additional fresh air to the exhaust valves (secondary air system). Late ignition angles make sure that the exhaust gas from the cylinders has a higher temperature. This exhaust gas includes fuel that is un-burnt, and was deliberately injected into great quantities. The secondary air system adds fresh air to the exhaust gas as it leaves the cylinder and the extra fuel is burnt. As a result, the temperature of the exhaust gas and of the catalyst increases quickly. The afterburning in the exhaust manifold before catalyst changes the sound characteristic of the engine. This heating-up of the catalyst, including afterburning, is normal and has no effect on the service life of the engine. During this catalyst heating phase the engine has increased idle speed, may have increased vibrations, and a different sound characteristic. Depending on conditions the time of the catalyst heating phase varies.
0112552030192
Service Bulletin/Repair Instructions
Engine may have reduced performance without significant loss of power or stalling
A011255 2030192-
Service Bulletin/Repair Instructions
MIL light on. P2015 sender of intake manifold flap position/air flow control, implausible signal P2020 sender of intake manifold flap position, intake manifold flap 2, implausible signal. Engine may have reduced performance without significant loss of power or stalling. Check service history to see if the improved ? B? suffix V157 Intake Flap motor has already been installed previously; if yes, only replace the potentiometer seals as described below. The fault entry is made because a linkage of the intake manifold flap adjustment sticks. This is caused by deformed oil seal behind the potentiometers.
SB090111
Service Bulletin/Repair Instructions
VOLKSWAGEN SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. PRODUCTION ISSUES MAY CAUSE PREMATURE WEAR ON THE INTAKE CAMSHAFT AND CAMSHAFT FOLLOWER. MALFUNCTION LIGHT WILL ILLUMINATE. *RM
AWA-10-11
Service Bulletin/Repair Instructions
VOLKSWAGEN: WARRANTY EXTENSION FOR THE HEADLIGHT BULBS. *RM
SAC-28F2-REV
Service Bulletin/Repair Instructions
AUDI: GASOLINE ENGINE VEHICLES; INSPECT, AND IF NECESSARY, REPLACE IGNITION COILS. VEHICLES AFFECTED BY THIS ACTION MAY HAVE IGNITION COILS THAT COULD MALFUNCTION UNDER CERTAIN CONDITIONS. ADDED FINAL MAILING PHASE-8/10 VIN INFORMATION. MODELS A4/CABRIOLET; TT; A3; A8; A6; S4; ALLROAD; RS4; Q7; S6; S8. *PE
SA-28F2 J1
Service Bulletin/Repair Instructions
AUDI: (REVISED) VEHICLES AFFECTED BY THIS ACTION MAY HAVE IGNITION COILS THAT COULD MALFUNCTION UNDER CERTAIN CONDITIONS. IF THIS HAPPENS, THE MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE TO LET YOU KNOW THAT THE VEHICLE MAY EXPERIENCE SOME DETERIORATION IN PERFORMANCE. IN SOME CASES, A MALFUNCTIONING IGNITION COIL MAY CAUSE A VEHICLE TO EXCEED FEDERAL AND/OR CALIFORNIA EMISSIONS STANDARDS. *PE UPDATED 8/9/10. *PE UPDATED 8/11/10. *PE UPDATED 11/8/10. *PE UPDATED 11/10/10. *PE UPDATED 1/10/11. *PE
TSB-00-10-02
Service Bulletin/Repair Instructions
AUDI: SOFTWARE VERSION MANAGEMENT (SVM) OPERATING INSTRUCTIONS. DETAILING THE GENERAL PROCESS FOR CARRYING OUT A SOFTWARE VERSION MANAGEMENT (SVM) SOFTWARE UPDATE FOR ANY TSB OR REQUIRED VEHICLE UPDATE (RVU). TROUBLESHOOTING INFORMATION IS INCLUDED. *PE
TSB-24-10-02
Service Bulletin/Repair Instructions
AUDI: MIL ON AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY-P310B (LOW PRESSURE FUEL SYSTEM REGULATION, FUEL PRESSURE OUTSIDE TOLERANCE); P129F OR P008B (LOW PRESSURE FUEL SYSTEM, PRESSURE TOO HIGH); P129E OR P008A (LOW PRESSURE SYSTEM, PRESSURE TOO LOW); P2540 (LOW PRESSURE FUEL SYSTEM, PRESSURE OUT OF RANGE); P0087 (RAIL FUEL PRESSURE SYSTEM, PRESSURE TOO LOW). MODELS A3,4,6,8, S6,8, RS4, Q7, AND TT (2005-2008). *PE
TSB-24-10-01
Service Bulletin/Repair Instructions
AUDI: DUE TO FUEL INTRUSION INTO THE LOW PRESSURE SYSTEM FUEL PRESSURE SENSOR (G410), A FALSE SIGNAL MAY BE SENT TO THE CONTROLLER, RESULTING IN A READING THAT IS OUT OF TOLERANCE. COMPARING MEASURE VALUE BLOCK 103 WITH 106 IS NOT AN ACCURATE METHOD TO DIAGNOSE LOW SIDE FUEL PRESSURE SENSOR G410. *PE
KM-1379
Service Bulletin/Repair Instructions
AUDI: MIL LIGHT ON AND DTC P2294 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT), P2295 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT LOW), P2296 (FUEL PRESSURE REGULATOR 2 CONTROL CIRCUIT HIGH) IN FAULT MEMORY DRIVABILITY IS NOT AFFECTED. WIRING HARNESS TO HIGH PRESSURE PUMP MIGHT BE STRESSED AND TIGHTLY BENT AT THE PUMP CONNECTOR. THE HARNESS ALSO MIGHT BE BENT AROUND SHARP EDGES OF CYLINDER HEAD. NO MODELS LISTED. *PE
TSB-01-09-06
Service Bulletin/Repair Instructions
AUDI: SOFTWARE VERSION MANAGEMENT (SVM), OPERATING INSTRUCTIONS. SVM IS A PROCESS TO UPDATE THE PROGRAMMING IN FLASHABLE (RE-PROGRAMMABLE) CONTROL MODULES AND/OR TO DOCUMENT CHANGES IN SOFTWARE LEVELS IN AUDI VEHICLES. THIS SYSTEM USES THE VAS 5051B OR VAS 5052 DIAGNOSTIC TOOLS TO SEND VEHICLE SPECIFIC DATA TO THE SVM DATABASE, TO DOWNLOAD INSTRUCTIONS FROM THE SVM DATABASE, AND TO FLASH CONTROL UNITS FOR IDENTIFIED SOFTWARE UPDATES. *PE
TSB-24-09-08
Service Bulletin/Repair Instructions
AUDI: ENGINE WILL NOT START WITH POSSIBLE MIL/EPC ON (P0087, P0088, P310B). ENGINE DOESN'T START. THE FOLLOWING DTC ENTRIES MAY BE LOGGED IN THE FAULT MEMORY INDIVIDUALLY OR IN COMBINATION: FUEL RAIL/SYSTEM PRESSURE TOO LOW-P0087; FUEL RAIL/SYSTEM PRESSURE TOO HIGH-P0088; LOW FUEL PRESSURE REGULATION, FUEL PRESSURE OUTSIDE OF TOLERANCE-P310B. *PE
TB-24-09-07
Service Bulletin/Repair Instructions
AUDI: FUEL PRESSURE SENSOR REPLACEMENT. VEHICLE MUST MEET ALL OF THE FOLLOWING CRITERIA: VEHICLES THAT SHOW THE CL/24M4 CODE IN THE ELSAWEB CAMPAIGN/ACTION INFORMATION SCREEN; WITHIN THE LIMITED NEW VEHICLE WARRANTY;PROCEDURE MUST BE PERFORMED WITHIN THE ALLOTTED TIME FRAME STATED; MUST BE PERFORMED ON APPLICABLE VEHICLES IN DEALER INVENTORY PRIOR TO SALE. *PE
TSB-01-08-33
Service Bulletin/Repair Instructions
AUDI: SOFTWARE VERSION MANAGEMENT(SVM) OPERATING INSTRUCTIONS. ITS A PROCESS TO UPDATE THE PROGRAMMING IN FLASHABLE (REPROGRAMMABLE) CONTROL MODULES AND/OR TO DOCUMENT CHANGES IN SOFTWARE LEVELS IN ALL AUDI VEHICLES. *PE
TSB-44-08-14
Service Bulletin/Repair Instructions
AUDI: WHEEL BOLTS REQUIRE TORQUE ADJUSTMENT. TORQUE STICKS AND TORQUE EXTENSION BARS ARE NOT APPROVED BY AUDI OF AMERICA, INC. AND SHOULD NOT BE USED TO APPLY TORQUE TO WHEEL BOLTS. ALL AUDI MODELS INCLUDED. *PE
240812
Service Bulletin/Repair Instructions
MIL ON (DTC P310B AND/OR P129F) AND ONE OR MORE OF THE FOLLOWING DTCS ARE STORED IN THE ECM DATA MEMORY. *PE
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.