2057841/5
Service Bulletin/Repair Instructions
Windscreen replacement criteria whilst under manufacturers warranty.
Vehicle report
2022 BENTLEY BENTAYGA HYBRID
Service bulletins
166 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
2078038/5
Service Bulletin/Repair Instructions
Service info: Paint Damage/Anomalies | All Models
2083061/1
Service Bulletin/Repair Instructions
Real Wear Setup and Guide using VYSOR
2051562/17
Service Bulletin/Repair Instructions
12 volt - Battery condition checks - Battery replacement requirements
2065926/6
Service Bulletin/Repair Instructions
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001. Customer statement: The warning lamp for the emission control system is displayed within the DIP
2071190/4
Service Bulletin/Repair Instructions
HVAC failing to cool | DTC B16A1F0 in diagnostic address 00C5 | Bentayga Series (Hybrid).
2028794/10
Service Bulletin/Repair Instructions
Engine coolant mixture - Restrictions on use of desalinated water.
2080097/2
Service Bulletin/Repair Instructions
Service info: Conversion of imported vehicles. Technical background: Conversion of a vehicle for use in a market other than the one for which it was originally designed or intended is not supported. Enquiries related to conversions or retrofits of vehicles from (or to) other markets (e.g. reimport from USA or UK) are not supported by Technical Support. Vehicles are developed and constructed according to specific market requirements of the respective destination country. As the compatibility of different components (e.g. control units) cannot be defined comprehensively regarding their mutual dependence and interaction in the case of modifications, and in order to prevent danger or risks due to constructional changes, support or advice regarding these modifications cannot be provided.
2028808/10
Service Bulletin/Repair Instructions
Service info: Engine oil – Specific oil type and oil consumption reference.
2051187/13
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2068273/6
Service Bulletin/Repair Instructions
Multiple random misfires evident during PDI.
2075786/3
Service Bulletin/Repair Instructions
Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2071131/6
Service Bulletin/Repair Instructions
Measured values - Cycle recording instructions Condition: In some cases Measured value traces may be requested in XML format for analysis by Product Support Technical Background: The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis
2051562/16
Service Bulletin/Repair Instructions
12 volt - Battery condition checks - Battery replacement requirements. Customer statement / workshop findings: 12 volt battery flat or unserviceable
2057841/4
Service Bulletin/Repair Instructions
Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged
2059612/7
Service Bulletin/Repair Instructions
Home Charging Unit PIN code - Bentayga Hybrid and Flying Spur Hybrid. Customer statement / workshop findings: Bentley Home Charging Unit – Unable to recollect Personal Identification Number (PIN). Unable to charge High Voltage Battery with Bentley Home Charging Unit.
2051562/15
Service Bulletin/Repair Instructions
12 volt - Battery condition checks - Battery replacement requirements. Customer statement / workshop findings: 12 volt battery flat or unserviceable
2080097/1
Service Bulletin/Repair Instructions
Service info: Conversion of imported vehicles
2051562/14
Service Bulletin/Repair Instructions
12 volt - Battery condition checks - Battery replacement requirements. Condition: 12 volt battery flat or unserviceable
2079669/1
Service Bulletin/Repair Instructions
Questionnaire For All Technical Connected Car Queries. Condition: This questionnaire is designed to gather all necessary information from retailers before escalating a technical request through DISS for connected car related issues.
2065926/5
Service Bulletin/Repair Instructions
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001. Customer statement: The warning lamp for the emission control system is displayed within the DIP
2071190/3
Service Bulletin/Repair Instructions
HVAC failing to cool | DTC B16A1F0 in diagnostic address 00C5 | Bentayga Series (Hybrid) | 23MY - 25MY.
2061195/4
Service Bulletin/Repair Instructions
Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns.
2028808/9
Service Bulletin/Repair Instructions
Service info: Engine oil - Specific oil type and oil consumption reference. Technical Background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
2051187/12
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Condition: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2052785/10
Service Bulletin/Repair Instructions
Brake noise identification
2056407/7
Service Bulletin/Repair Instructions
Running gear - Noise identification. Condition Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system
2068273/5
Service Bulletin/Repair Instructions
Multiple random misfired evident during PDI. Condition: Multiple random cylinder misfire DTC’s detected during PDI - DTC P030000: Random/Multiple Cylinder Misfire Detected (misfires on multiple cylinders) within the following control units: • V8 - ECM 1 - V8 (Address 01) ECM control unit • W12 - ECM 1 - (Address 01) and/or ECM 2 (Address 11)
2075786/2
Service Bulletin/Repair Instructions
Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2028794/9
Service Bulletin/Repair Instructions
Engine coolant mixture - Restrictions on use of desalinated water. Technical Background: An important factor of influencing the cooling system efficiency is the water used in the mixture Due to the different ingredients and characteristics existing in each country or even region, Bentley has decided to define the quality of water for cooling systems
2063651/5
Service Bulletin/Repair Instructions
Tyre tread/sidewall crack(s)
2064337/4
Service Bulletin/Repair Instructions
Usage of E10 fuel. Condition In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI.
2068946/10
Service Bulletin/Repair Instructions
Dynamic ride system warning visible - DTC P0B2500 logged within address 0021 (Battery Energy Control Module 2). Customer statement: Bentley dynamic ride system fault is displayed within the Drivers Instrument Panel (DIP)
2071131/5
Service Bulletin/Repair Instructions
Measured values - Cycle recording instructions. Condition: In some cases Measured value traces may be requested in XML format for analysis by Product Support.
2069806/7
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines
2078395/1
Service Bulletin/Repair Instructions
Service info: Leather Damage/Anomalies | All Models. Condition: In rare instances the customer and/or retailer may identify the presence of damage or visual anomalies on leather trimmed surfaces within the vehicle cabin during or post pre-delivery inspection.
2050542/8
Service Bulletin/Repair Instructions
Front Exterior Lighting Steamed Up/Leaks | 12-24MY.
2069806/6
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines.
2075786/1
Service Bulletin/Repair Instructions
Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2077519/2
Service Bulletin/Repair Instructions
Exterior Gap and Profile Information | 17 - 25MY. Condition: Customer and/or retailer may raise an issue with panel gaps/alignment or flushness.
2077783/1
Service Bulletin/Repair Instructions
E-Machine temperature fault DTC P0A2E00 | Bentayga and Flying Spur (Hybrid) | 20-23MY. Condition: MIL and/or HV warning message on DIP. DTC stored in 0051 Power Electronics P0A2E00: Drive Motor "A" Temperature Sensor Circuit.
2077529/2
Service Campaign
Seat Fans Inoperative | All Models | 17-25MY. Condition: Customer may report that the seat ventilation system is not functioning with no airflow from the seat ventilation ducts.
2077519/1
Service Bulletin/Repair Instructions
Exterior Gap and Profile Information | 17 - 25MY. Condition: Customer and/or retailer may raise an issue with panel gaps/alignment or flushness
2077529/1
Service Bulletin/Repair Instructions
Seat Fans Inoperative | All Models | 17-25MY
2071190/2
Service Bulletin/Repair Instructions
HVAC failing to cool | DTC B16A1F0 in diagnostic address 00C5 | Bentayga Series (Hybrid) | 23MY - 25MY. Customer statement: HVAC system is not cooling. Workshop findings DTC B16A1F0 - Refrigerant shut-off valve Icing - water load too high, evident within diagnostic address 00C5.
2051187/11
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Condition: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2068273/4
Service Bulletin/Repair Instructions
Multiple random misfires evident during PDI. Condition: Multiple random cylinder misfire DTC’s detected during PDI - DTC P030000: Random/Multiple Cylinder Misfire Detected (misfires on multiple cylinders) within the following control units: • V8 - ECM 1 - V8 (Address 01) ECM control unit • W12 - ECM 1 - (Address 01) and/or ECM 2 (Address 11)
2062080/10
Service Bulletin/Repair Instructions
Bentayga V8 Kovomo and V6 (Hybrid) - Fuel Pressure Regulation - Numerous DTC's.
2071131/3
Service Bulletin/Repair Instructions
Measured values - Cycle recording instructions. Condition: In some cases, Measured value traces may be requested in XML format for analysis by Product Support
2028794/8
Service Bulletin/Repair Instructions
Engine coolant mixture - Restrictions on use of desalinated water. Technical Background: An important factor of influencing the cooling system efficiency is the water used in the mixture Due to the different ingredients and characteristics existing in each country or even region, Bentley has decided to define the quality of water for cooling systems Demineralised water according to standard VDE 0510 meets all requirements and can be purchased worldwide Therefore undiluted coolant should be mixed in the correct ratio using demineralised water as detailed in Elsa Pro coolant specification, this will detail the ratio and type of coolant to use The use of desalinated water in the engine cooling system is specifically prohibited
2057978/8
Service Bulletin/Repair Instructions
Engine Lubricating Oil - Replenishment. Condition: Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires “topping up” between services.
2062365/5
Service Bulletin/Repair Instructions
Bentayga and New Flying Spur Hybrid - DTC P103A00 evident - Engine Oil Fuel Portion Too High. Customer statement: • Warning message within the DIP • The message asks the customer to ‘warm up engine’ accompanied by a yellow warning (Figure 1) No other symptoms are experienced.
2064337/3
Service Bulletin/Repair Instructions
Usage of E10 fuel. Condition: In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI Technical Background: Details on the introduction of E10 fuel which contains 10% ethanol and its usage on Bentley products • All vehicles produced post 1990 Model year can be run using E10 fuel However • All vehicles produced before 1990 Model year MUST NOT use E10 fuel
2028808/8
Service Bulletin/Repair Instructions
Service info: Engine oil - Specific oil type and oil consumption reference. Condition: Engine oil level requires top up between services Technical Background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
2063410/7
Service Bulletin/Repair Instructions
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Condition: Issue suspected with the Infotainment Main unit (5F / J794) - For example: • MMI screen image flickers or goes blank • No response to selection • Audio cuts out
2056407/6
Service Bulletin/Repair Instructions
Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering.
2063017/4
Service Bulletin/Repair Instructions
Road wheel inspection procedure. Condition: In the event a complaint is received regarding road wheel/s condition for example: • Scratches • Corrosion • Damage • Blemishes • Chipping
2063651/4
Service Bulletin/Repair Instructions
Tyre tread/sidewall crack(s)
2065926/4
Service Bulletin/Repair Instructions
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001.
2052785/9
Service Bulletin/Repair Instructions
Brake noise identification. Technical Background: Brake noises can be attributed to many causes, the most common causes are as follows: • Brake discs or pads are close to their wear limit • New brake pads and/or discs have not been properly bedded in after installation • Aftermarket pads or discs are installed • There is debris such as small stones, grit, road salt or sand between the brake disc and pad • Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time
2075562/1
Service Bulletin/Repair Instructions
Keyless entry system (KESSY) function was found to be disabled when the vehicle was parked for a short duration of time. Customer statement / workshop findings: Keyless entry system (KESSY) function is disabled when the vehicle is parked for a short duration of time Technical background: The reported symptom is due to the Battery management shut off stages being too early due to the battery size being incorrectly entered on replacement
2071131/2
Service Bulletin/Repair Instructions
Measured values - Cycle recording instructions. Technical background The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis.
2075035/1
Service Bulletin/Repair Instructions
DTC B200000 with symptom code 1049088 evident in the high voltage battery charger control module (Diagnostic address C6).
2075041/1
Service Bulletin/Repair Instructions
Lower and/or upper front suspension lever bushes - Warranty replacement guidelines.
2068946/7
Service Bulletin/Repair Instructions
DTC P0B2500 logged within address 0021 (Battery Energy Control Module 2) - Dynamic ride system warning visible. Customer statement / workshop findings Customer statement: Bentley dynamic ride system fault is displayed within the Drivers Instrument Panel (DIP) Workshop findings: DTC P0B2500 - Hybrid/EV Battery "A" Voltage low is stored within address 21- Battery Energy Control Module 2 Technical background: Possible internal fault with the super capacitor
2073955/1
Service Bulletin/Repair Instructions
New Flying Spur (Hybrid) and Bentayga (Hybrid) - DTC P019100: Fuel Rail Pressure Sensor "A" Circuit Range/Performance. Customer statement / workshop findings Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with a “Drive System Fault” warning, the following DTC listed below evident within Engine control module 1: • P019100 Fuel Rail pressure Sensor ‘A’ Circuit Range/Performance Technical background On engine restart after a drive (engine at operating temperature) the check engine lamp illuminates within the DIP with a “Drive System Fault” warning - DTC P019100 is logged
2069806/5
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2051562/12
Service Bulletin/Repair Instructions
12 Volt - Battery condition checks. Customer statement / workshop findings: 12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section.
2069252/2
Service Bulletin/Repair Instructions
Warnings within the DIP for the rear steering system - DTC B200096 and/or P060700 evident within diagnostic address 00CB. Customer statement / workshop findings: - Rear Steering Fault warning present within the DIP. Workshop findings: The following DTCs could be evident within diagnostic address 00CB - Rear Axle Steering control module - DTC B200096 and/or P060700 - The rear wheels may also be tracking incorrectly. Technical background: In the event the symptom described with the Customer statement/workshop findings section is evident the operative should conduct the instructions within the Measure section.
2072732/1
Service Bulletin/Repair Instructions
Customer reports the electric driving range is not as expected. Technical background: To confirm the vehicle is operating correctly and being driven efficiently, the guidelines within the Measure section should be followed (Subject to a genuine customer complaint) By following the guidelines within the Measure section (depending on vehicle type) it should then be possible to determine if the vehicle is operating within specification.
2063410/6
Service Bulletin/Repair Instructions
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Customer statement / workshop findings: Issue suspected with the Infotainment Main unit (5F / J794) - For example: - MMI screen image flickers or goes blank - No response to selection - Audio cuts out.
2066502/3
Service Bulletin/Repair Instructions
Charging starts and stops when using a high voltage charging unit - DTC P33E800 is evident within 00C6. Customer statement / workshop findings: - When using a high voltage charging unit to charge the high voltage battery, charging starts and is then interrupted/stops Workshop findings The following DTC is also evident: - P33E800: Charge socket A, charge connector lock mechanical malfunction - passive/sporadic.
2066040/3
Service Bulletin/Repair Instructions
Oil leak from the oil separator/breather connection - Intake manifold whistle - Engine warning lamp illuminated. Customer statement - Engine warning lamp illumintaed within the DIP And/or - Whistling noise(s) from the Inlet manifold Workshop findings: Oil leak between the oil separator tank and the Bank 1 breather line connection
2072055/1
Service Bulletin/Repair Instructions
Spurious DTC identification. Customer statement / workshop findings: Customers will not be aware of any DTCs, workshop operatives may discover spurious DTCs whilst running Guided Fault Finding (GFF) when using ODIS Technical background: To determine the course of action which should be taken the operative should refer to the Bentley Hub referencing the following: Spurious DTC list for TPI 2072055 The document contains all known spurious DTCs for all applicable vehicle variants.
2028794.7
Service Bulletin/Repair Instructions
Engine Coolant Mixture - Restrictions on use of desalinated water Customer Statement: -Engine coolant requires topping up or replacing
2052785.8
Service Bulletin/Repair Instructions
Brake Noise Identification: Customer Statement: -Noise/squeal complaint from the braking system Technical Background: -The noise/squeal can be reproduced and clearly assigned to the braking system
2061195/3
Service Bulletin/Repair Instructions
Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns. Customer statement / workshop findings: The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported. Technical background: The minimum standards check list document within the Measure section is required to capture an accurate description of customer telephone issues.
2063651.3
Service Bulletin/Repair Instructions
Tyre tread/sidewall crack(s) Customer Statement: -Cracks evident in the sidewall and/or tread pattern (See the examples in Figures 1 and 2 showing cracks within the tread pattern)
2065697.3
Service Bulletin/Repair Instructions
Bentayga Hybrid - Emission control system warning lamp illuminated within the DIP - Open circuit DTCs evident Customer Statement: -Emission control system warning lamp illuminated (Figure 1) within the Driver Information Panel (DIP)
2065715.3
Service Bulletin/Repair Instructions
Bentayga Hybrid - Emission control system warning lamp illuminated within the DIP - Potential wiring clash condition Customer Statement: -Emission control system warning lamp illuminated (Figure 1) within the Driver Information Panel (DIP)
2068273.3
Service Bulletin/Repair Instructions
Multiple Random Misfires Evident During PDI Customer Statement: -Multiple random cylinder misfire DTCs detected during PDI - DTC P030000: Random/Multiple Cylinder Misfire Detected (misfires on multiple cylinders) within the following control units: -V8 - ECM 1 - V8 (Address 01) ECM control unit -W12 - ECM 1 - (Address 01) and/or ECM 2 (Address 11)
2050542.7
Service Bulletin/Repair Instructions
Service info: body/equipment: front exterior lighting steamed up/leaks Customer Statement: -1. The lenses of the headlights (illustration 1a) /front fog lamps (illustration 1b) are steamed up/damp from the inside with minor drips. 2. Water is in the headlight (illustration 2a) / front fog lamp (illustration 2b), big drips.
2051776.5
Service Bulletin/Repair Instructions
Key blade can be difficult to remove from key fob. Technical Background: -Deviations in the key blade and key fob assembly could make it difficult to remove the key blade.
2056407.5
Service Bulletin/Repair Instructions
Running gear - Noise identification Workshop Findings: -The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2057978.7
Service Bulletin/Repair Instructions
Engine Lubricating Oil - Replenishment Customer Statement: -Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires topping up between services.
2059612.5
Service Bulletin/Repair Instructions
Bentayga Hybrid and New Flying Spur Hybrid - Home Charging Unit PIN code Customer Statement: -Bentley Home Charging Unit Unable to recollect Personal Identification Number (PIN). Unable to charge High Voltage Battery with Bentley Home Charging Unit.
2063017.3
Service Bulletin/Repair Instructions
Road wheel inspection procedure Customer Statement: In the event a complaint is received regarding road wheel/s condition for example: - Scratches - Corrosion - Damage - Blemishes - Chipping Please refer to the onward instructions
2071540/1
Service Bulletin/Repair Instructions
Bentayga/New Flying Spur - Hybrid - DTC P0B2500 and/or P0B2600 in 008C - High voltage battery management control unit. Customer statement / workshop findings: - Yellow engine warning light illuminated within the DIP - Red high voltage battery warning light illuminated within the DIP Workshop findings - DTC P0B2500 and/or P0B2600 stored within 008C - High voltage battery management control unit.
2051562/11
Service Bulletin/Repair Instructions
12 Volt - Battery condition checks. Customer statement / workshop findings: 12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section
2053177/19
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customers will not be aware of any fault codes Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle Technical background: The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants Should a particular TPI be listed as Archived, the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions within TPI 2053177/- regarding the DTC description and actions which should be conducted (if any).
2066246/3
Service Bulletin/Repair Instructions
Bentayga/New Flying Spur - DTC P0C4A00 Hybrid/EV Battery Pack Coolant Pump 'A' Control Performance within address 8C. Customer statement / workshop findings - Speed limitation noticeable when driving in EV mode (Restricting the vehicle speed to approximately 30mph/48kph) - Refer also to the video on the Bentley Hub referencing TPI 2066246/- - No other warnings are evident within the DIP Workshop findings: - DTC P0C4A00 Hybrid/EV Battery Pack Coolant Pump 'A' Control Performance within Address 8C Battery Regulation Control Unit
2069806/4
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2071190/1
Service Bulletin/Repair Instructions
Bentayga Hybrid - HVAC not cooling - DTC B16A1F0 is evident within diagnostic address 00C5. Customer statement / workshop findings: Customer statement HVAC system is not cooling Workshop findings: DTC B16A1F0 - Refrigerant shut-off valve Icing - water load too high, evident within diagnostic address 00C5 Technical background: Upon receipt of a customer complaint relating to HVAC system not cooling and DTC B16A1F0 is evident, please refer to the Measure section of this TPI.
2069806/3
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2069806/2
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. In the event that HVAC cleaning products are required, these MUST be sourced locally. Before using the cleaner the operative must inform the customer of the product which will be used, a neutral fragrance cleaner should be used as the customer may not like the smell of the cleaner should a fragranced product be used Please ensure all supporting information is included within the DISS query when requesting permission to clean the HVAC system including clear photographs and/or videos showing the reported issue, should the required information not be supplied the warranty claim could be cancelled.
2059612/4
Service Bulletin/Repair Instructions
Bentayga Hybrid and New Flying Spur Hybrid - Home Charging Unit PIN code. Customer statement / workshop findings: Bentley Home Charging Unit: Unable to recollect Personal Identification Number (PIN). Unable to charge High Voltage Battery with Bentley Home Charging Unit. Technical background: The Bentley Home Charging Unit can be protected from unauthorised use by creating a four-digit PIN. If the PIN authorisation function is activated it has to be entered in the Home Charging Unit before it is used to charge the High Voltage Battery. If a Customer forgets the assigned PIN it will not be possible to unlock the Bentley Home Charging Unit. Follow the steps within the Measure section to reset the PIN. Measure: If the Bentley Home Charging Unit PIN is forgotten the user manual suggests the Customer contact an authorised Bentley Retailer to enable PIN reset. Currently the PIN reset system is not available to Bentley Retailers, although a service solution is in progress. Should a Customer request PIN reset, please advise that a Personal Unlock Key (PUK) is included within the letter originally supplied with the Bentley Home Charging Unit. If the Customer enters the PUK into the Bentley Home Charging Unit a new PIN may be set.
2051187/9
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: - Poor engine running - Reduced power - Engine warning lamp illuminated - Symptom related DTCs evident within the applicable engine control unit(s) Technical background: Technical Product Information (TPI) to assist retailers when diagnosing poor engine running or misfires.
2070843/1
Service Bulletin/Repair Instructions
Bentayga & New Flying Spur Hybrid - Home Charging Unit - Restricted operation or charging not possible message displayed. Customer statement / workshop findings: High voltage system - Bentley home charging unit (High version) error message shown within the display screen The error message can be as follows: - Restricted operation Or - Charging not possible. Technical background: In the event the symptoms described are evident, the operative should refer to the instructions within the Measure section of this TPI.
2063729/3
Service Bulletin/Repair Instructions
Fitment of control modules from donor vehicles for test purposes. Technical background: If an issue is suspected for one of the control modules listed below: - Onboard supply control unit (J519) - Convenience system central control unit (J393) - Data bus diagnostics interface (J533) - Control unit 1 for Information Electronics (J794) - Control unit in dash panel insert (J285) - Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only possible if approved from Product Support via an open DISS query. The donor of parts should only be used as a temporary test VERY IMPORTANT: The ODIS replace routine MUST NOT be carried out under any circumstances.
2066502/2
Service Bulletin/Repair Instructions
Charging starts and stops when using a public charging unit. Customer statement: - When using a public charging unit to charge the high voltage battery, charging starts and is then interrupted/stops Workshop findings The following DTC is also evident: - P33E800: Charge socket A, charge connector lock mechanical malfunction passive/sporadic Measure: 1) Referring to Rep.Gr 93 - Carry out an Inspection and classification of the Hybrid battery unit AX1. 2) Check the operation of the charging system using the customers and the retailers own charging equipment 3) Run a full diagnostic log and check if the DTC within the Technical background section are evident.
2062080.9
Service Bulletin/Repair Instructions
Bentayga V8 Kovomo and V6 (Hybrid) - Fuel Pressure Regulation - Numerous DTC's Customer Statement: -Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCâÂÂs as detailed below:
2069806.1
Service Bulletin/Repair Instructions
HVAC Refrigerent Leakage - Diagnosis Guidelines Customer Statement: -HVAC not cooling or HVAC cooling less than expected
2062365.4
Service Bulletin/Repair Instructions
Bentayga and New Flying Spur Hybrid - DTC P103A00 - Engine Oil Fuel Portion Too High Customer Statement: -Warning message within the DIP -The message asks the customer to (warm up engine) accompanied by a yellow warning. No other symptoms are experienced.
2062080.8
Service Bulletin/Repair Instructions
Bentayga V8 Kovomo and V6 (Hybrid) - Fuel Pressure Regulation - Numerous DTCs Customer Statement: -Check engine lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: -P310B00 with symptom code 2636 - Low Fuel Pressure Regulation -P014800 Fuel Deliver Error -P019100 Fuel Rail Pressure Sensor (A) Circuit Range/Performance -P018B00 Fuel Pressor Sensor (B) Circuit Range/Performance with Symptom Code 17871 -Misfire DTCs
2036678.5
Service Bulletin/Repair Instructions
Speaker Replacement - Diagnostic Checks Technical Background: -There have been instances where door speakers have been changed under warranty for the complaint of sound distortion, yet when tested by ourselves and the supplier, no fault could be found with the returned unit.
2062622.2
Service Bulletin/Repair Instructions
Water Leak/Wind Noise Diagnosis Customer Statement: -Water leak/wind noise evident -The instructions within this TPI should be followed to assist in the diagnosis of water leaks or wind noise.
2049586.11
Service Bulletin/Repair Instructions
Misfiring, W12 TSI - Excessive carbon build up cylinder leakage Customer Statement: -Emission control warning signal displayed, engine misfire Workshop Findings: -Event entries in engine control unit relating to cylinder misfires- excessive carbon build up to leading to cylinder leakage and spark plug foul
2028808.6
Service Bulletin/Repair Instructions
All 12MY Engine Oil- Service Info: Engine Oil - Specific oil type and oil consumption reference, Technical Background: -The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. -The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type -Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering.
2050542.6
Service Bulletin/Repair Instructions
Body/Equipment: Front exterior lighting steamed up/leaks Customer Statement: -The lenses of the headlights/front fog lamps are steamed up/damp from the inside with minor drips
2051187.8
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only Customer Statement: -Poor engine running, reduced power, engine warning lamp illuminated.
2051562.10
Service Bulletin/Repair Instructions
12 Volt - Battery Test Instruction Technical Background: -For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the measure of this section of this TPI.
2058423.9
Service Bulletin/Repair Instructions
New Continental GT/GTC, New Flying Spur and Bentayga - Low Oil Pressure Warning During Early Vehicle Life - W12 Only Customer Statement: -Warning on the Driver Instrument Panel (DIP) - Oil pressure too low -DTCs relating to oil pressure may also be stored within the master ECU -Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU)
2061195.2
Service Bulletin/Repair Instructions
Telephone Functionality Complaint- Minimum Standards Required For Analysis of Concerns Customer Statement: -The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported.
2063651.2
Service Bulletin/Repair Instructions
Tyre tread/sidewall crack(s) Customer Statement: -Cracks evident in the sidewall and/or tread pattern Technical Background: -The issue is mainly evident on vehicles with very low usage This is a result of the tyre compound hardening due to the following: -Tyre age -Tyre pressure not adjusted to specification -Low mileage/vehicle usage -Vehicle storage conditions
2065919.4
Service Bulletin/Repair Instructions
Water Leaking from the mechanical water pump- Low coolant level warning displayed - W12 TSI Customer Statement/Workshop Findings: -Coolant leaking from the mechanical coolant pump -Coolant witness mark on the mechanical coolant pump although coolant is not leaking/dripping from the pump -Low coolant level warning displayed
2068273.2
Service Bulletin/Repair Instructions
Multiple Random Misfires Evident During PDI Customer Statement: -Multiple random cylinder misfire DTCs detected during PDI -DTC P030000: Random/Multiple Cylinder Misfire Detected (misfires on multiple cylinders) within the following control units: -V8-ECM1 - V8 (Address 01) ECM control unit -W12 - ECM1 - (Address 01) and/or ECM 2 (Address 11)
2062365.3
Service Bulletin/Repair Instructions
Bentayga and New Flying Spur Hybrid - DTC P103A00 Evident- Engine Oil Fuel Potion Too High Customer Statement: -Warning message within the DIP -The message asks the customer to (warm up engine) accompanied by a yellow warning (figure 1) No other symptoms are experienced.
2065715.2
Service Bulletin/Repair Instructions
Bentayga Hybrid- Emission control system warning lamp illuminated within the DIP-Potential wiring clash condition Workshop Findings: -Various/Numerous open circuit DTCs evident within the Engine control unit (Address 001)
2065926.2
Service Bulletin/Repair Instructions
Fuel Pressure regulator- DTC P242200 with symptom code 14536 evident within address 0001 Workshop Findings: -DTC P242200 with symptom code 14536 - EVAP System Vent Valve Stuck Closed - DTC evident in Engine Control Module Address 0001
2051776.4
Service Bulletin/Repair Instructions
New Continental GT - Key blade can be difficult to remove from key fob Technical Background: -Deviations in the key blade and key fob assembly could make it difficult to remove the key blade.
2053351.8
Service Bulletin/Repair Instructions
Buzzing noise from engine area Customer Statement: -Buzzing noise heard at idle from the sump area when the vehicle is elevated on a workshop ramp. -The noise cannot be heard from inside the cabin or outside of the vehicle in normal circumstances.
2053429.5
Service Bulletin/Repair Instructions
Emission Control System Lamp Illuminated DTC P044100 Evident Customer Statement: -Emission control system warning lamp illuminated within the Driver Information Panel (DIP) in conjunction with DTC - P044100: EVAP Emission Contr.Sys.Incorrect Purge Flow - logged within on or both engine control modules
2056407.4
Service Bulletin/Repair Instructions
Running Gear - Noise Identification Customer Statement: -Noise complaint from the suspension and/or steering
2063017.2
Service Bulletin/Repair Instructions
Road Wheel Inspection Procedure: Customer Statement: In the event of a complaint is received regarding road wheel/s condition for example: -scratches -corrosion -damage -blemishes -chipping
2064337.2
Service Bulletin/Repair Instructions
Usage of E10 Fuel Customer Statement: -In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI
2051187.7
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only Customer Statement: -Poor engine running, reduced power, engine warning lamp illuminated.
2068273.1
Service Bulletin/Repair Instructions
Multiple Random Misfires Evident During PDI Customer Statement: -Multiple random cylinder misfire DTC's detected during PDI-DTC P030000: Random/Multiple cylinder misfire detected with the following control units: -V8-ECM1-V*(Address01)ECM control unit -W12-ECM 1 - (Address 01) and/or ECM 2 (Address 11)
2065919.3
Service Bulletin/Repair Instructions
Water Leaking from the mechanical water pump- Low coolant level warning displayed Customer Statement: -Coolant leaking from the mechanical coolant pump -Coolant witness mark on the mechanical coolant pump although coolant is not leaking/dripping from the pump -Low coolant level warning displayed
2051562.9
Service Bulletin/Repair Instructions
12 Volt- Battery Condition Checks. Technical background For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI.
2062080/7
Service Bulletin/Repair Instructions
Bentayga V8 Kovomo and V6 (Hybrid) - Fuel Pressure Regulation - Numerous DTCs Customer Statement: -Check Engine Lamp Illuminated within the Driver Instrument Panel (DIP): -P310B00 with system code 2636 - Low Fuel Pressure Regulation" Low Fuel Pressure Regulation" -P014800 Fuel Deliver Error" -P019100 Fuel Rail Pressure Sensor 'A' Circuit Range/Performance -P018B00 Fuel Pressure Sensor "B" Circuit Range/Performance with symptom code 17871 -Misfire" DTCs
2066246/2
Service Bulletin/Repair Instructions
Bentayga/New FlyingSpur - DTCPOC4A00 Hybrid/EV Battery Pack Coolant Pump "A" Control Performance Within Address 8C Customer Statement: -Speed limitation noticeable when driving in EV mode (Restricting the vehicle speed to approximately 30mph/48kph) -No other warnings are evident within the DIP
2067489/1
Service Bulletin/Repair Instructions
Window side glass - Identification - Standard (STD) or Privacy (PRV) Customer Statement: - Incorrect side glass fitted - Standard (STD) not Privacy (PRV) or visa versa and/or Defects are evident within the glass Technical Background: -The instructions within the Measure section MUST only be followed if the glass is to be replaced
2053177/17
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: -Customers will not be aware of any fault codes -Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle Technical background: -The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants -Should a particular TPI be listed as Archived, the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions within TPI 2053177/- regarding the DTC description and actions which should be conducted (if any).
2053348/7
Service Bulletin/Repair Instructions
W12 Engine management light on - Turbocharger speed sensor DTCs stored Customer Statement: -Engine management light is evident within the DIP Technical Background: -The operative should lease with the customer to clarify the driving conditions in which the issue occurs, see examples below: -Duration the vehicle was driven before the issue was evident -Throttle load (harsh or light acceleration) -What gradient they were driving on (uphill/downhill/flat road surface etc) -Speed of the vehicle when the issue occurred -Road conditions for example: City driving with traffic queues
2062626/3
Service Bulletin/Repair Instructions
DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 - W12 TSI engine derivative. Customer statement / workshop findings: -DTCs stored for all cylinders on Bank 1 or all cylinders on Bank 2 including multiple cylinder misfires DTC - Misfires logged in one or both engine control units - Engine warning light on - Erratic engine operation Technical background: -Refer to the Measure section of this TPI -This TPI is applicable to all W12 TSI models including W12 TSI Speed models
2066040/2
Service Bulletin/Repair Instructions
Oil leak from the oil separator/breather connection - Intake manifold whistle - Emission control warning within the DIP Customer statement: -Emission control warning within the DIP Technical Background: -Refer to the Measure section of this TPI -This TPI is applicable to all W12 TSI models including W12 TSI Speed models
2066497/2
Service Bulletin/Repair Instructions
Bentayga Hybrid - Unable to charge the high voltage battery or charging starts and then stops Customer Statement: -Unable to charge the high voltage battery, or charging starts and then stops Technical Background: -In the event the issue is as described within the Customer statement/Workshop findings section, refer to the instructions within the Measure section of this TPI
2067488/1
Service Bulletin/Repair Instructions
Veneer/trim mismatch - DISS query requirements. Customer statement / workshop findings: In the event that a trim mismatch is detected for example: - Piano black veneer is supplied although the customer ordered walnut veneer Or - The interior trim colour is incorrect for example: Cricket ball interior trim is supplied although the customer ordered Hotspur The operative should refer to the Technical background section
2046299/14
Service Bulletin/Repair Instructions
Bentayga - 1.2KHz - 1.4KHz rear brake squeal. Customer statement / workshop findings: Squeal from the rear of the vehicle at low speed while braking. Technical background: While braking at low speed, a vibration of 1.2 to 1.4 KHz can be produced by the friction between the rear brake pad and disc resulting in a complaint of brake noise from the customer. Measure: 1) Follow the Brake noise identification TPI 2052785 - IMPORTANT: For frequency analysis the noise recording equipment Bentley Motors recommends is the Chassis ear tool WT 10437 2) If the sound recording produces a frequency of 1.2-1.4KHz - Remove the rear brake pads as per Repair manual Rep.Gr 46 - Rear Brake Pads - To Remove and Fit and check the actual condition of the brake pads - If the brake pads are to be refitted it will be necessary to make note of the position of the pads for installation purposes
2061044/4
Service Bulletin/Repair Instructions
Bentayga Hybrid - Distance covered when in electric mode is not as expected. Customer statement / workshop findings: Customer reports the Hybrid E-range (Electric Driving Range) does not achieve the expected distance. Technical background: VERY IMPORTANT: Please ensure all guidelines within the repair manual are strictly followed before and whilst conducting any work on vehicles with a High voltage system Electric range can depend on multiple factors, e.g. driving style, road gradients, ambient temperature, use of heating / cooling functions, and the use of other electrical consumers on the vehicle. The tests within the Measure section should be carried out (Subject to a genuine customer complaint) to check/confirm that the vehicle is operating correctly and being used efficiently By completing the checks within the Measure section, it should then be possible to determine that the vehicle is operating correctly and within specification. The customerâÂÂs Home charging equipment should be used when conducting the Measure section checks
2062080/6
Service Bulletin/Repair Instructions
Bentayga V8 Kovomo and V6 (Hybrid) - Fuel Pressure Regulation - Numerous DTCs. Customer statement / workshop findings: Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: - P310B00 with symptom code 2636 - Low Fuel Pressure Regulation Low Fuel Pressure Regulation - P014800 Fuel Deliver Error - P019100 Fuel Rail pressure Sensor A Circuit Range/Performance - P018B00 - Fuel Pressure Sensor B Circuit Range/Performance with symptom code 17871 - Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues Technical background: In the event the customer complaint relates to the following: - Customer experienced poor start up - proceed with the remaining instructions NOTE: The operative must gather information regarding the Customer experience regarding when the issue occurred for example: Pre- conditions, warning lights and driveability at the time that the issue occurred, details when the vehicle was last refueled and the grade of fuel used The operative must now use the information contained within the Measure section to determine the correct analysis and repair procedure.
2062365/2
Service Bulletin/Repair Instructions
Bentayga and New Flying Spur Hybrid DTC P103A00 evident Engine Oil Fuel Portion Too High. Customer statement / workshop findings: - Warning message within the DIP - The message asks the customer to warm up engine accompanied by a yellow warning (Figure 1) No other symptoms are experienced. Workshop findings - DTC P103A00 evident - Engine Oil Fuel Portion Too High (Figure 2) Smell of fuel in the engine oil Technical background: The warning is caused by the level of unburnt fuel in the engine oil. This value is calculated by the Engine Control Module (ECM) and is based on the driver usage pattern The more cold starts the Internal Combustion Engine (ICE) is exposed to the higher the chance of fuel making its way into the engine oil via the cylinders When the fuel calculation reaches the pre-programmed amount this then causes the DTC to be triggered
2067418/1
Service Bulletin/Repair Instructions
Bentley brand name lettering is no longer applied to the rear calipers (vehicles specified with iron brakes). Customer statement / workshop findings: The rear brake calipers do not have the brand name lettering Bentley applied to the rear brake calipers However The front brake calipers do have the brand name lettering Bentley applied to the front brake calipers Technical background: Refer to the production change section Production change: All vehicles which have been produced post 31.05.2022 onwards do not have the brand name lettering Bentley lettering applied to the rear brake calipers as shown in Figure 1
2052853/9
Service Bulletin/Repair Instructions
Clicking noises from the left and/or right front corner(s). Customer statement / workshop findings: Clicking noises from the left and/or right front corner(s) Technical background: In order to accurately diagnose and repair customer reported clicking noises from the front corner(s) the Measure section of this TPI consists of three individual sections, each section describes the symptom and the remedy which should be applied. Symptoms and descriptions regarding clicking noises can appear to be very similar when described, where possible the customer should demonstrate the reported symptom to enable correct diagnosis.
2059027/4
Service Bulletin/Repair Instructions
Customer statement / workshop findings: Various warning messages on Driver Instrument Panel (DIP) Unable to select EV Drive mode. Fault codes stored in multiple diagnostic addresses for Data-bus errors. Diagnostic Trouble Codes (DTCs) P0C5*00 - Drive motor A faults - stored in address 51 - Drive Motor Control Module . Technical background: DTCs - P0C5*00 - may be set within address 51 - Drive Motor Control Module If the transmission 12 Volt harness becomes damaged or there are unsatisfactory electrical connections within the connector for Drive Motor Position Sensor. The stored DTCs would indicate an issue with Drive motor A, however, prior to carrying out any fault diagnosis use the information within the Measure section of this document as an initial check.
2066714/1
Service Bulletin/Repair Instructions
Bentayga Hybrid - DTC's P0C5C00 - P0C5200 - P0A2D00 evident within address 51 - Drive Motor Control Module. Customer statement / workshop findings: Engine warning light within the Driver Instrument Panel (DIP) The following DTCs are evident within address 51 - Electric Drive Motor for: Workshop findings One or a combination of the following DTCs are evident within address 51 - Electric Drive Motor - P0C5C00: Drive Motor A Position Sensor Circuit B Low And/or - P0C5200: Drive Motor A Position Sensor Circuit A Low And/or - P0A2D00: Drive Motor A Temperature Sensor Circuit High Technical background: In the event the symptoms described are evident the operative should refer to the instructions within the Measure section of this TPI.
2066843/1
Service Bulletin/Repair Instructions
Engine vibration/humming at idle - Active engine mount diagnosis guidelines. Customer statement: Engine vibration/humming noise at idle Workshop findings DTC C113111 - 307 - Actuator 1 for assembly mounting Short circuit to Ground (GND) evident within the engine mounting control module - Diagnostic address 00BA Technical background In the event the issue is as described, refer to the Measure section of this TPI.
2066497/1
Service Bulletin/Repair Instructions
Bentayga Hybrid - Unable to charge the high voltage battery or charging starts and then stops. Customer statement: Unable to charge the high voltage battery, or charging starts and then stops. Workshop findings: The following DTCs are evident within the high voltage battery charger control module (Diagnostic address C6) - P33EC00: External plug in charge socket A electrical error - P31CB00: Immediate upload button Stuck Closed - P168F00: System malfunction And/or The following DTC is evident within hybrid battery management control module (Diagnostic address 8C) - P0E5E00: Battery charger control module processor performance. Measure: 1) Referring to Rep.Gr 93 - Carry out an Inspection and classification of the Hybrid battery unit AX1
2066502/1
Service Bulletin/Repair Instructions
Charging starts and stops when using a public charging unit. Customer statement / workshop findings: When using a public charging unit to charge the high voltage battery, charging starts and is then interrupted/stops Workshop findings The following DTC is also evident: P33E800: Charge socket A, charge connector lock mechanical malfunction passive/sporadic. Measure: 1) Referring to Rep.Gr 93 - Carry out an Inspection and classification of the Hybrid battery unit AX1 VERY IMPORTANT: In the event that the classification result of the battery is Normal the operative should conduct the remaining steps of this TPI from step 2 However If the classification result of the battery is either Danger or Warning then move the car to the quarantine area and raise a DISS immediately, the operative MUST NOT continue with any other work unless instructed via the open DISS query 2) Check the operation of the charging system using the customers and the retailers own charging equipment 3) Run a full diagnostic log and check if the DTC within the Technical background section are evident.
2066561/1
Service Bulletin/Repair Instructions
High Voltage battery Charger communication DTC U113900 - Stored in address 17 - Dashboard. Customer statement / workshop findings: The following DTC is evident within diagnostic address 17 - Dashboard - High Voltage battery Charger communication DTC U113900. Measure: Should no other issues be evident with the High Voltage charging system, DTC U113900 stored within address 17 can be ignored Technical product information High Voltage battery Charger communication DTC U113900 - Stored in address 17 - Dashboard Transaction No.: 2066561/1
2062080/5
Service Bulletin/Repair Instructions
Bentayga V8 Kovomo and V6 (Hybrid) - Fuel Pressure Regulation. Customer statement / workshop findings: Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with one or multiple DTCs as detailed below: -P310B00 with symptom code 2636 - Low Fuel Pressure Regulation Low Fuel Pressure Regulation -P014800 Fuel Deliver Error -P019100 Fuel Rail pressure Sensor A Circuit Range/Performance Misfire DTCs There may be multiple DTCs and symptoms present due to fuel pressure regulation or fuel supply issues, Measure: Check Engine Lamp Illumination with DTC P310B00 and symptom code 2636 - Engine Running Concerns, Fuel system issues -P310B00 Low Fuel Pressure Regulation symptom code 2636 -P014800 Fuel Deliver Error -P019100 Fuel Rail pressure Sensor A Circuit Range/Performance Misfire DTCs 1) If not already done, raise a DISS query. 2) Check Low fuel pressure, specified value and Fuel low pressure, actual value within the fault memory, refer to ECU 01 Engine Control Module 1 - From Extended ambient conditions note the values of the Low fuel pressure, specified value and Fuel low pressure, actual value as shown in Figure 1.
2065697/1
Service Bulletin/Repair Instructions
Bentayga Hybrid - Emission control system warning lamp illuminated within the DIP - Open circuit DTC's evident. Customer statement: - Emission control system warning lamp illuminated (Figure 1) within the Driver Information Panel (DIP) Figure 1 Workshop findings - Various/numerous open circuit DTCs evident within the Engine control unit (Address 001) - Fuse 6 (SA fuseboard) in some cases could be blown. Measure: VERY IMPORTANT: Hybrid vehicles use a High voltage system and MUST only be worked on by suitably qualified personnel 1) Using the applicable wiring diagram, Conduct a wiring integrity check to confirm the wire(s) which are damaged/chaffed TIP: Overlaying the suspected damaged wiring may be carried out to confirm the actual issue, the overlayed wiring MUST NOT be left in place, all damaged wiring MUST be repaired as per all Elsa pro guidelines 2) Using the applicable repair manual Rep.Gr - Gain access to the main body harness damaged wiring - Take clear photographs of the issue (once identified) the photographs should be saved as they are required to uploaded to a non-technical DISS query after the repair has been conducted.
2066246/1
Service Bulletin/Repair Instructions
Bentayga/New Flying Spur - DTC P0C4A00 Hybrid/EV Battery Pack Coolant Pump A Control Performance within address 8C. Customer statement / workshop findings: - Speed limitation noticeable when driving in EV mode (Restricting the vehicle speed to approximately 30mph/48kph) - Refer also to the video on the Bentley Hub referencing TPI 2066246/- - No other warnings are evident within the DIP Workshop findings - DTC P0C4A00 Hybrid/EV Battery Pack Coolant Pump "A" Control Performance within Address 8C Battery Regulation Control Unit. Measure: 1) Referring to Rep.Gr 93 - Carry out an Inspection and classification of the Hybrid battery unit AX1.
2065715/1
Service Bulletin/Repair Instructions
Bentayga Hybrid - Emission control system warning lamp illuminated within the DIP - Potential wiring clash condition. Customer statement / workshop findings: - Emission control system warning lamp illuminated (Figure 1) within the Driver Information Panel (DIP) Figure 1 Workshop findings - Various/numerous open circuit DTCs evident within the Engine control unit (Address 001). Measure: VERY IMPORTANT: Hybrid vehicles use a High voltage system and MUST only be worked on by suitably qualified personnel 1) Using the applicable wiring diagram, conduct wiring integrity checks to confirm the wire(s) which are damaged/chaffed TIP: Overlaying the suspected damaged wiring can be conducted to confirm the issue, the overlayed wiring MUST NOT be left in place, all damaged wiring MUST be repaired as per all Elsa pro guidelines 2) Referring to Rep.Gr 97 - Repair the damaged wire(s) Technical product information Bentayga Hybrid - Emission control system warning lamp illuminated within the DIP - Potential wiring clash condition Transaction No.: 2065715/1 3) Remove all sharp edges which could damage the main wiring harness 4) Reposition and secure the main wiring harness.
2065926/1
Service Bulletin/Repair Instructions
Fuel pressure regulator - DTC P242200 with symptom code 14536 evident within address 0001. Customer statement / workshop findings Customer statement: The warning lamp for the emission control system is displayed within the DIP Workshop findings: DTC P242200 with Symptom Code 14536 - EVAP System Vent Valve Stuck Closed - DTC evident in Engine Control Module Address 0001. Measure VERY IMPORTANT: The following repair work MUST only be conducted by suitably qualified personal 1) Referring to Rep.Gr 20 - Replace the Pressure regulator assembly and associated components 2) Conduct a road test in EV Mode and/or Hybrid drive mode where possible 3) On return from road test - Check to confirm the issue is resolved and DTC P242200 is not evident within address 0001
2065604/1
Service Bulletin/Repair Instructions
Suspicion that control units or services have been influenced by third parties. Customer statement / workshop findings: In the event a customer complaint is received relating to a suspicion that control units or services have been influenced by third parties the instructions within this TPI should be followed. Technical background: A suspicion that control units or services have been influenced by third parties means that unauthorised people or groups may have gained access to a vehicle's control unit(s) or online services and may have manipulated them in such a way that may compromise customer data confidentiality or the operation of the vehicle and/or online services. When investigating potential third party influences of control units or online services, it is important to take all normal diagnostic measures to rule out a normal functional error or misuse of the system by the user
2059612/3
Service Bulletin/Repair Instructions
Bentayga Hybrid and New Flying Spur Hybrid - Home Charging Unit PIN code. Customer statement / workshop findings: Bentley Home Charging Unit - Unable to recollect Personal Identification Number (PIN). Unable to charge High Voltage Battery with Bentley Home Charging Unit. Technical background: The Bentley Home Charging Unit can be protected from unauthorised use by creating a four-digit PIN. If the PIN authorisation function is activated it has to be entered in the Home Charging Unit before it is used to charge the High Voltage Battery. If a Customer forgets the assigned PIN it will not be possible to unlock the Bentley Home Charging Unit. Follow the steps within the 'Measure' section to reset the PIN.
2057460/3
Service Bulletin/Repair Instructions
Bentayga Hybrid - Home Charging Unit. Customer statement / workshop findings: Charger for high voltage battery does not have charging cables connected. Technical background: The Bentley Home Charging Unit IC-CPD (In Cable Control & Protection Device) is used to charge the high voltage battery on Bentley Hybrid vehicles. There is a legal requirement for home charging units supplied to Customers to have the Vehicle Charge Cable connected, currently the home charge unit and charging cables are supplied as individual items, this does not meet the required standard certified by Intertek (Certification agency).
2057470/3
Service Bulletin/Repair Instructions
Bentayga Hybrid and New Flying Spur - Bentley Home Charging Unit - Not Functioning. Customer statement / workshop findings: High voltage system - Bentley Home Charging Unit (Low version) does not function, the following indicator lights are illuminated in red. Bentley Home Charging Unit is connected to an un-earthed power supply. Technical background: Certain mains power supplies use an un-earthed infrastructure, in these specific circumstances it is necessary to deactivate Protective Earth (PE) conductor monitoring on the Bentley Home Charging Unit.
2057988/6
Service Bulletin/Repair Instructions
Bentayga Hybrid - Accessory Embargo. Customer statement / workshop findings Customer request to install fixed sill steps, deploying sill steps or Illuminated tread plates to Bentayga Hybrid vehicle. Technical background Due to the routing and proximity of high voltage cables it is strictly prohibited to install the following accessories on Bentayga Hybrid vehicles. - Fixed sill steps. - Deploying sill steps. - Illuminated tread plates NOTE: Tow bars cannot be fitted to Bentayga Hybrid vehicles due to certification IMPORTANT: Bentayga Styling Specification MUST NOT be fitted to Bentayga Hybrid vehicles from 19 to 20 Model year due to certification reasons However From 21 Model year onwards the Bentayga Styling specification can be fitted Note: Failure to observe these instructions may invalidate certain aspects of the vehicle warranty. In all instances, when placing an order for spare parts or accessories please refer to the electronic parts catalogue (ETKA)
2058049/4
Service Bulletin/Repair Instructions
DTC P0CE100 - Logged within the Thermal management control unit - Address C5 - J1024. Customer statement / workshop findings: DTC P0CE100 - Logged within the Thermal management control unit - Address C5 - J1024 Customer statement Concern is not visible to the customer, vehicle performance is not affected, no warning lights are evident within the DIP Technical background: Refer to Measure section of this TPI
2060117/3
Service Bulletin/Repair Instructions
Bentayga Hybrid - AC charging timer does not function. Customer statement / workshop findings: The AC charging timer does not function. The customer has difficulties with timed charging. Immediate charging works correctly, but when using timed charging there is a problem waking up the on board charger. Technical background: Currently in the event of an issue that causes the vehicle not wake correctly to begin charging at the requested time, the system cannot inform the customer that there has been an issue. Measure: With a confirmed Customer complaint of 'The AC charging timer does not function'. Check for a static event entry in the internal charger (address 00C6), if Diagnostic Trouble Codes (DTCs) are stored then these must be resolved. Otherwise, no further action is necessary, raise an information only DISS referencing this TPI.
2063410/3
Service Bulletin/Repair Instructions
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Customer statement / workshop findings Issue suspected with the Infotainment Main unit (5F / J794) - For example: - MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background The operative should continue as follows: - Complete the questionnaire within the Measure section of this TPI (Part 1) once completed the questionnaire should be attached to an existing or already open DISS query - Once the questionnaire is complete, the operative should refer to (Part 2) within the Measure section regarding fault finding/diagnosis of the Infotainment Main unit (5F / J794)
2063725/2
Service Bulletin/Repair Instructions
Bentayga Hybrid - HVAC compressor noise. Customer statement / workshop findings High frequency noise audible from inside the cabin and/or when standing at the front of the vehicle, the noise is mainly evident whilst operating in hot ambient temperatures The noise increases with compressor speed and interior fan demand Technical background Upon receipt of a customer complaint for excessive HVAC compressor noise, Refer to the video on the Bentley Hub referencing TPI 2063725/- If the noise is as shown within the video, the customer should be advised that this is normal and does not represent a failure or malfunction on the vehicle Ensure customers of Hybrid vehicles are aware of the following: - The HVAC compressor is isolated to the High voltage system and is not controlled by the engine or engine speed - In conditions of high ambient temperature, the operation of the compressor can be audible - This is a known characteristic of this compressor and does not signify a fault Any other noise or fault which is not as described should be reported via an open DISS query The operative should wait for a response from Product Support before conducting any further work
2064824/3
Service Bulletin/Repair Instructions
Bentayga Hybrid - Left hand rear jacking block replacement and coolant pipe check (SC 21/38). Technical background Due to possible a clash condition between the high voltage system coolant pipe and the left hand rear jack block - Figure 1 (point A) the original left hand rear jack block must be replaced. Remedy - The left hand jack block requires replacement - A visual inspection of the high voltage system coolant pipe (situated adjacent to the left hand jack block) is required NOTE: Depending on the outcome of the inspection, the coolant pipe may require replacement (Refer the Work section)
2064824/1
Service Bulletin/Repair Instructions
Bentayga Hybrid - Left hand rear jacking block replacement and coolant pipe check (SC 21/38). Technical background: Due to possible a clash condition between the high voltage system coolant pipe and the left hand rear jack block - Figure 1 (point A) the original left hand rear jack block must be replaced. Remedy: - The left hand jack block requires replacement - A visual inspection of the high voltage system coolant pipe (situated adjacent to the left hand jack block) is required NOTE: Depending on the outcome of the inspection, the coolant pipe may require replacement (Refer the Work section)
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.