2057841/5
Service Bulletin/Repair Instructions
Windscreen replacement criteria whilst under manufacturers warranty.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
2057841/5
Windscreen replacement criteria whilst under manufacturers warranty.
2078038/5
Service info: Paint Damage/Anomalies | All Models
2083061/1
Real Wear Setup and Guide using VYSOR
2051562/17
12 volt - Battery condition checks - Battery replacement requirements
2028794/10
Engine coolant mixture - Restrictions on use of desalinated water.
2080097/2
Service info: Conversion of imported vehicles. Technical background: Conversion of a vehicle for use in a market other than the one for which it was originally designed or intended is not supported. Enquiries related to conversions or retrofits of vehicles from (or to) other markets (e.g. reimport from USA or UK) are not supported by Technical Support. Vehicles are developed and constructed according to specific market requirements of the respective destination country. As the compatibility of different components (e.g. control units) cannot be defined comprehensively regarding their mutual dependence and interaction in the case of modifications, and in order to prevent danger or risks due to constructional changes, support or advice regarding these modifications cannot be provided.
2028808/10
Service info: Engine oil – Specific oil type and oil consumption reference.
2051187/13
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2068273/6
Multiple random misfires evident during PDI.
2075786/3
Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2071131/6
Measured values - Cycle recording instructions Condition: In some cases Measured value traces may be requested in XML format for analysis by Product Support Technical Background: The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis
2051562/16
12 volt - Battery condition checks - Battery replacement requirements. Customer statement / workshop findings: 12 volt battery flat or unserviceable
2057841/4
Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged
2080971/1
Left‑Hand Muffler - No Exhaust Gas | Flying Spur V6 PHEV. Customer may report that the left-hand muffler does not emit exhaust gases, appears cold to the touch, or shows no visible condensation, in contrast to the right-hand muffler.
2051562/15
12 volt - Battery condition checks - Battery replacement requirements. Customer statement / workshop findings: 12 volt battery flat or unserviceable
2080097/1
Service info: Conversion of imported vehicles
2051562/14
12 volt - Battery condition checks - Battery replacement requirements. Condition: 12 volt battery flat or unserviceable
2079669/1
Questionnaire For All Technical Connected Car Queries. Condition: This questionnaire is designed to gather all necessary information from retailers before escalating a technical request through DISS for connected car related issues.
2061195/4
Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns.
2028808/9
Service info: Engine oil - Specific oil type and oil consumption reference. Technical Background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
2051187/12
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Condition: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2052785/10
Brake noise identification
2056407/7
Running gear - Noise identification. Condition Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system
2068273/5
Multiple random misfired evident during PDI. Condition: Multiple random cylinder misfire DTC’s detected during PDI - DTC P030000: Random/Multiple Cylinder Misfire Detected (misfires on multiple cylinders) within the following control units: • V8 - ECM 1 - V8 (Address 01) ECM control unit • W12 - ECM 1 - (Address 01) and/or ECM 2 (Address 11)
2075786/2
Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2028794/9
Engine coolant mixture - Restrictions on use of desalinated water. Technical Background: An important factor of influencing the cooling system efficiency is the water used in the mixture Due to the different ingredients and characteristics existing in each country or even region, Bentley has decided to define the quality of water for cooling systems
2063651/5
Tyre tread/sidewall crack(s)
2064337/4
Usage of E10 fuel. Condition In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI.
2068946/10
Dynamic ride system warning visible - DTC P0B2500 logged within address 0021 (Battery Energy Control Module 2). Customer statement: Bentley dynamic ride system fault is displayed within the Drivers Instrument Panel (DIP)
2071131/5
Measured values - Cycle recording instructions. Condition: In some cases Measured value traces may be requested in XML format for analysis by Product Support.
2069806/7
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines
2078395/1
Service info: Leather Damage/Anomalies | All Models. Condition: In rare instances the customer and/or retailer may identify the presence of damage or visual anomalies on leather trimmed surfaces within the vehicle cabin during or post pre-delivery inspection.
2050542/8
Front Exterior Lighting Steamed Up/Leaks | 12-24MY.
2069806/6
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines.
2075786/1
Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2077519/2
Exterior Gap and Profile Information | 17 - 25MY. Condition: Customer and/or retailer may raise an issue with panel gaps/alignment or flushness.
2077783/1
E-Machine temperature fault DTC P0A2E00 | Bentayga and Flying Spur (Hybrid) | 20-23MY. Condition: MIL and/or HV warning message on DIP. DTC stored in 0051 Power Electronics P0A2E00: Drive Motor "A" Temperature Sensor Circuit.
2077529/2
Seat Fans Inoperative | All Models | 17-25MY. Condition: Customer may report that the seat ventilation system is not functioning with no airflow from the seat ventilation ducts.
2077519/1
Exterior Gap and Profile Information | 17 - 25MY. Condition: Customer and/or retailer may raise an issue with panel gaps/alignment or flushness
2077529/1
Seat Fans Inoperative | All Models | 17-25MY
2051187/11
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Condition: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2068273/4
Multiple random misfires evident during PDI. Condition: Multiple random cylinder misfire DTC’s detected during PDI - DTC P030000: Random/Multiple Cylinder Misfire Detected (misfires on multiple cylinders) within the following control units: • V8 - ECM 1 - V8 (Address 01) ECM control unit • W12 - ECM 1 - (Address 01) and/or ECM 2 (Address 11)
2071131/3
Measured values - Cycle recording instructions. Condition: In some cases, Measured value traces may be requested in XML format for analysis by Product Support
2028794/8
Engine coolant mixture - Restrictions on use of desalinated water. Technical Background: An important factor of influencing the cooling system efficiency is the water used in the mixture Due to the different ingredients and characteristics existing in each country or even region, Bentley has decided to define the quality of water for cooling systems Demineralised water according to standard VDE 0510 meets all requirements and can be purchased worldwide Therefore undiluted coolant should be mixed in the correct ratio using demineralised water as detailed in Elsa Pro coolant specification, this will detail the ratio and type of coolant to use The use of desalinated water in the engine cooling system is specifically prohibited
2057978/8
Engine Lubricating Oil - Replenishment. Condition: Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires “topping up” between services.
2062365/5
Bentayga and New Flying Spur Hybrid - DTC P103A00 evident - Engine Oil Fuel Portion Too High. Customer statement: • Warning message within the DIP • The message asks the customer to ‘warm up engine’ accompanied by a yellow warning (Figure 1) No other symptoms are experienced.
2064337/3
Usage of E10 fuel. Condition: In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI Technical Background: Details on the introduction of E10 fuel which contains 10% ethanol and its usage on Bentley products • All vehicles produced post 1990 Model year can be run using E10 fuel However • All vehicles produced before 1990 Model year MUST NOT use E10 fuel
2028808/8
Service info: Engine oil - Specific oil type and oil consumption reference. Condition: Engine oil level requires top up between services Technical Background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
2063410/7
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Condition: Issue suspected with the Infotainment Main unit (5F / J794) - For example: • MMI screen image flickers or goes blank • No response to selection • Audio cuts out
2056407/6
Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering.
2063017/4
Road wheel inspection procedure. Condition: In the event a complaint is received regarding road wheel/s condition for example: • Scratches • Corrosion • Damage • Blemishes • Chipping
2063651/4
Tyre tread/sidewall crack(s)
2052785/9
Brake noise identification. Technical Background: Brake noises can be attributed to many causes, the most common causes are as follows: • Brake discs or pads are close to their wear limit • New brake pads and/or discs have not been properly bedded in after installation • Aftermarket pads or discs are installed • There is debris such as small stones, grit, road salt or sand between the brake disc and pad • Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time
2075562/1
Keyless entry system (KESSY) function was found to be disabled when the vehicle was parked for a short duration of time. Customer statement / workshop findings: Keyless entry system (KESSY) function is disabled when the vehicle is parked for a short duration of time Technical background: The reported symptom is due to the Battery management shut off stages being too early due to the battery size being incorrectly entered on replacement
2071131/2
Measured values - Cycle recording instructions. Technical background The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis.
2068627/6
New Flying Spur Hybrid - 12 volt battery draining during the charging of the high voltage battery.
2073955/1
New Flying Spur (Hybrid) and Bentayga (Hybrid) - DTC P019100: Fuel Rail Pressure Sensor "A" Circuit Range/Performance. Customer statement / workshop findings Check Engine Lamp illuminated within the Driver Instrument Panel (DIP) with a “Drive System Fault” warning, the following DTC listed below evident within Engine control module 1: • P019100 Fuel Rail pressure Sensor ‘A’ Circuit Range/Performance Technical background On engine restart after a drive (engine at operating temperature) the check engine lamp illuminates within the DIP with a “Drive System Fault” warning - DTC P019100 is logged
2068627/5
New Flying Spur Hybrid - 12 volt battery draining during the charging of the high voltage battery. Customer statement / workshop findings: The 12 volt battery is draining during the charging of the high voltage battery Technical background: The requirement to replace the On Board Charger (AX4) has been removed - DO NOT REPLACE ANY PARTS A software update is currently being developed and will be available within Quarter 2 - 2024, once available the software update will be communicated via the normal communication channels.
2069806/5
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2051562/12
12 Volt - Battery condition checks. Customer statement / workshop findings: 12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section.
2069252/2
Warnings within the DIP for the rear steering system - DTC B200096 and/or P060700 evident within diagnostic address 00CB. Customer statement / workshop findings: - Rear Steering Fault warning present within the DIP. Workshop findings: The following DTCs could be evident within diagnostic address 00CB - Rear Axle Steering control module - DTC B200096 and/or P060700 - The rear wheels may also be tracking incorrectly. Technical background: In the event the symptom described with the Customer statement/workshop findings section is evident the operative should conduct the instructions within the Measure section.
2072732/1
Customer reports the electric driving range is not as expected. Technical background: To confirm the vehicle is operating correctly and being driven efficiently, the guidelines within the Measure section should be followed (Subject to a genuine customer complaint) By following the guidelines within the Measure section (depending on vehicle type) it should then be possible to determine if the vehicle is operating within specification.
2068627/4
New Flying Spur Hybrid - 12 volt battery draining during the charging of the high voltage battery. Customer statement / workshop findings: The 12 volt battery is draining during the charging of the high voltage battery Technical background: Revision history - TPI 2068627/4 Repair guidelines regarding the procedure which must be followed in the event that Static DTC U042300 is evident within address C5 (Thermal Management control unit) after the On Board Charger (AX4) has been replaced.
2072055/1
Spurious DTC identification. Customer statement / workshop findings: Customers will not be aware of any DTCs, workshop operatives may discover spurious DTCs whilst running Guided Fault Finding (GFF) when using ODIS Technical background: To determine the course of action which should be taken the operative should refer to the Bentley Hub referencing the following: Spurious DTC list for TPI 2072055 The document contains all known spurious DTCs for all applicable vehicle variants.
2068627/3
New Flying Spur Hybrid - 12 volt battery draining during the charging of the high voltage battery. Customer statement / workshop findings: The 12 volt battery is draining during the charging of the high voltage battery. In the event the issue is as described within the Customer statement/Workshop findings section the operative must refer to the instructions within the Measure section of this TPI
2028794.7
Engine Coolant Mixture - Restrictions on use of desalinated water Customer Statement: -Engine coolant requires topping up or replacing
2052785.8
Brake Noise Identification: Customer Statement: -Noise/squeal complaint from the braking system Technical Background: -The noise/squeal can be reproduced and clearly assigned to the braking system
2068627.2
New Flying Spur Hybrid - 12 Volt Battery draining during the charging of the high voltage battery Measure: -Raise a technical DISS query
2061195/3
Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns. Customer statement / workshop findings: The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported. Technical background: The minimum standards check list document within the Measure section is required to capture an accurate description of customer telephone issues.
2063651.3
Tyre tread/sidewall crack(s) Customer Statement: -Cracks evident in the sidewall and/or tread pattern (See the examples in Figures 1 and 2 showing cracks within the tread pattern)
2067598.3
Noise from left hand side of the vehicle when actuating the brake pedal Customer Statement: -Noise from left hand side of the vehicle when actuating the brake pedal
2068273.3
Multiple Random Misfires Evident During PDI Customer Statement: -Multiple random cylinder misfire DTCs detected during PDI - DTC P030000: Random/Multiple Cylinder Misfire Detected (misfires on multiple cylinders) within the following control units: -V8 - ECM 1 - V8 (Address 01) ECM control unit -W12 - ECM 1 - (Address 01) and/or ECM 2 (Address 11)
2071458.1
Flying Spur Hybrid - Engine warning lamp evident within the DIP - DTC U041100 and/or P0A2E00 is evident Customer Statement: -Drive system warning evident within the DIP -DTC U041100: Invalid Data Received from Drive Motor Control Module (A) with symptom code 23442 and/or 33303, evident within the engine control unit
2050542.7
Service info: body/equipment: front exterior lighting steamed up/leaks Customer Statement: -1. The lenses of the headlights (illustration 1a) /front fog lamps (illustration 1b) are steamed up/damp from the inside with minor drips. 2. Water is in the headlight (illustration 2a) / front fog lamp (illustration 2b), big drips.
2051776.5
Key blade can be difficult to remove from key fob. Technical Background: -Deviations in the key blade and key fob assembly could make it difficult to remove the key blade.
2056407.5
Running gear - Noise identification Workshop Findings: -The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2057978.7
Engine Lubricating Oil - Replenishment Customer Statement: -Engine lubricating oil lamp illuminated on driver instrument panel. Engine lubricating oil requires topping up between services.
2059612.5
Bentayga Hybrid and New Flying Spur Hybrid - Home Charging Unit PIN code Customer Statement: -Bentley Home Charging Unit Unable to recollect Personal Identification Number (PIN). Unable to charge High Voltage Battery with Bentley Home Charging Unit.
2063017.3
Road wheel inspection procedure Customer Statement: In the event a complaint is received regarding road wheel/s condition for example: - Scratches - Corrosion - Damage - Blemishes - Chipping Please refer to the onward instructions
2071540/1
Bentayga/New Flying Spur - Hybrid - DTC P0B2500 and/or P0B2600 in 008C - High voltage battery management control unit. Customer statement / workshop findings: - Yellow engine warning light illuminated within the DIP - Red high voltage battery warning light illuminated within the DIP Workshop findings - DTC P0B2500 and/or P0B2600 stored within 008C - High voltage battery management control unit.
2051562/11
12 Volt - Battery condition checks. Customer statement / workshop findings: 12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section
2053177/19
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customers will not be aware of any fault codes Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle Technical background: The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants Should a particular TPI be listed as Archived, the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions within TPI 2053177/- regarding the DTC description and actions which should be conducted (if any).
2066246/3
Bentayga/New Flying Spur - DTC P0C4A00 Hybrid/EV Battery Pack Coolant Pump 'A' Control Performance within address 8C. Customer statement / workshop findings - Speed limitation noticeable when driving in EV mode (Restricting the vehicle speed to approximately 30mph/48kph) - Refer also to the video on the Bentley Hub referencing TPI 2066246/- - No other warnings are evident within the DIP Workshop findings: - DTC P0C4A00 Hybrid/EV Battery Pack Coolant Pump 'A' Control Performance within Address 8C Battery Regulation Control Unit
2069806/4
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2069806/3
HVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2069806/2
HVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. In the event that HVAC cleaning products are required, these MUST be sourced locally. Before using the cleaner the operative must inform the customer of the product which will be used, a neutral fragrance cleaner should be used as the customer may not like the smell of the cleaner should a fragranced product be used Please ensure all supporting information is included within the DISS query when requesting permission to clean the HVAC system including clear photographs and/or videos showing the reported issue, should the required information not be supplied the warranty claim could be cancelled.
2059612/4
Bentayga Hybrid and New Flying Spur Hybrid - Home Charging Unit PIN code. Customer statement / workshop findings: Bentley Home Charging Unit: Unable to recollect Personal Identification Number (PIN). Unable to charge High Voltage Battery with Bentley Home Charging Unit. Technical background: The Bentley Home Charging Unit can be protected from unauthorised use by creating a four-digit PIN. If the PIN authorisation function is activated it has to be entered in the Home Charging Unit before it is used to charge the High Voltage Battery. If a Customer forgets the assigned PIN it will not be possible to unlock the Bentley Home Charging Unit. Follow the steps within the Measure section to reset the PIN. Measure: If the Bentley Home Charging Unit PIN is forgotten the user manual suggests the Customer contact an authorised Bentley Retailer to enable PIN reset. Currently the PIN reset system is not available to Bentley Retailers, although a service solution is in progress. Should a Customer request PIN reset, please advise that a Personal Unlock Key (PUK) is included within the letter originally supplied with the Bentley Home Charging Unit. If the Customer enters the PUK into the Bentley Home Charging Unit a new PIN may be set.
2051187/9
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: - Poor engine running - Reduced power - Engine warning lamp illuminated - Symptom related DTCs evident within the applicable engine control unit(s) Technical background: Technical Product Information (TPI) to assist retailers when diagnosing poor engine running or misfires.
2070843/1
Bentayga & New Flying Spur Hybrid - Home Charging Unit - Restricted operation or charging not possible message displayed. Customer statement / workshop findings: High voltage system - Bentley home charging unit (High version) error message shown within the display screen The error message can be as follows: - Restricted operation Or - Charging not possible. Technical background: In the event the symptoms described are evident, the operative should refer to the instructions within the Measure section of this TPI.
2063729/3
Fitment of control modules from donor vehicles for test purposes. Technical background: If an issue is suspected for one of the control modules listed below: - Onboard supply control unit (J519) - Convenience system central control unit (J393) - Data bus diagnostics interface (J533) - Control unit 1 for Information Electronics (J794) - Control unit in dash panel insert (J285) - Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only possible if approved from Product Support via an open DISS query. The donor of parts should only be used as a temporary test VERY IMPORTANT: The ODIS replace routine MUST NOT be carried out under any circumstances.
2066502/2
Charging starts and stops when using a public charging unit. Customer statement: - When using a public charging unit to charge the high voltage battery, charging starts and is then interrupted/stops Workshop findings The following DTC is also evident: - P33E800: Charge socket A, charge connector lock mechanical malfunction passive/sporadic Measure: 1) Referring to Rep.Gr 93 - Carry out an Inspection and classification of the Hybrid battery unit AX1. 2) Check the operation of the charging system using the customers and the retailers own charging equipment 3) Run a full diagnostic log and check if the DTC within the Technical background section are evident.
2069806.1
HVAC Refrigerent Leakage - Diagnosis Guidelines Customer Statement: -HVAC not cooling or HVAC cooling less than expected
2062365.4
Bentayga and New Flying Spur Hybrid - DTC P103A00 - Engine Oil Fuel Portion Too High Customer Statement: -Warning message within the DIP -The message asks the customer to (warm up engine) accompanied by a yellow warning. No other symptoms are experienced.
2036678.5
Speaker Replacement - Diagnostic Checks Technical Background: -There have been instances where door speakers have been changed under warranty for the complaint of sound distortion, yet when tested by ourselves and the supplier, no fault could be found with the returned unit.
2062622.2
Water Leak/Wind Noise Diagnosis Customer Statement: -Water leak/wind noise evident -The instructions within this TPI should be followed to assist in the diagnosis of water leaks or wind noise.
2068627.1
New Flying Spur Hybrid - 12 Volt Battery Draining During the Charging of the High Voltage Battery Measure: -Raise a Technical DISS query
2028808.6
All 12MY Engine Oil- Service Info: Engine Oil - Specific oil type and oil consumption reference, Technical Background: -The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. -The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type -Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering.
2050542.6
Body/Equipment: Front exterior lighting steamed up/leaks Customer Statement: -The lenses of the headlights/front fog lamps are steamed up/damp from the inside with minor drips
2051187.8
Poor Engine Running Complaints (Misfires) Petrol Engines Only Customer Statement: -Poor engine running, reduced power, engine warning lamp illuminated.
2051562.10
12 Volt - Battery Test Instruction Technical Background: -For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the measure of this section of this TPI.
2058423.9
New Continental GT/GTC, New Flying Spur and Bentayga - Low Oil Pressure Warning During Early Vehicle Life - W12 Only Customer Statement: -Warning on the Driver Instrument Panel (DIP) - Oil pressure too low -DTCs relating to oil pressure may also be stored within the master ECU -Diagnostic Trouble Codes (DTC) P052400: Engine Oil Pressure Too Low and/or P15AA00: Engine oil pressure - Lower limit not reached stored in the Master Engine Control Unit (ECU)
2061195.2
Telephone Functionality Complaint- Minimum Standards Required For Analysis of Concerns Customer Statement: -The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported.
2063651.2
Tyre tread/sidewall crack(s) Customer Statement: -Cracks evident in the sidewall and/or tread pattern Technical Background: -The issue is mainly evident on vehicles with very low usage This is a result of the tyre compound hardening due to the following: -Tyre age -Tyre pressure not adjusted to specification -Low mileage/vehicle usage -Vehicle storage conditions
2068273.2
Multiple Random Misfires Evident During PDI Customer Statement: -Multiple random cylinder misfire DTCs detected during PDI -DTC P030000: Random/Multiple Cylinder Misfire Detected (misfires on multiple cylinders) within the following control units: -V8-ECM1 - V8 (Address 01) ECM control unit -W12 - ECM1 - (Address 01) and/or ECM 2 (Address 11)
2061362.3
Engine intermittently fails to start/Kombi pop up (Engine Start System:fault) Customer Statement: -Customer unable to intermittently start the engine with the start button or -Engine starts but customer gets a pop up error on the kombi
2062365.3
Bentayga and New Flying Spur Hybrid - DTC P103A00 Evident- Engine Oil Fuel Potion Too High Customer Statement: -Warning message within the DIP -The message asks the customer to (warm up engine) accompanied by a yellow warning (figure 1) No other symptoms are experienced.
2067598.2
Noise from Left Hand Side of The Vehicle When Actuating The Brake Pedal Technical Background: -The noise is normal operation of the ABS modulator, the modulator actuates with each brake input as part of the blending process between energy regeneration and foundation brake application.
2051776.4
New Continental GT - Key blade can be difficult to remove from key fob Technical Background: -Deviations in the key blade and key fob assembly could make it difficult to remove the key blade.
2056407.4
Running Gear - Noise Identification Customer Statement: -Noise complaint from the suspension and/or steering
2063017.2
Road Wheel Inspection Procedure: Customer Statement: In the event of a complaint is received regarding road wheel/s condition for example: -scratches -corrosion -damage -blemishes -chipping
2064337.2
Usage of E10 Fuel Customer Statement: -In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI
2051187.7
Poor Engine Running Complaints (Misfires) Petrol Engines Only Customer Statement: -Poor engine running, reduced power, engine warning lamp illuminated.
2068273.1
Multiple Random Misfires Evident During PDI Customer Statement: -Multiple random cylinder misfire DTC's detected during PDI-DTC P030000: Random/Multiple cylinder misfire detected with the following control units: -V8-ECM1-V*(Address01)ECM control unit -W12-ECM 1 - (Address 01) and/or ECM 2 (Address 11)
2051562.9
12 Volt- Battery Condition Checks. Technical background For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI.
2066246/2
Bentayga/New FlyingSpur - DTCPOC4A00 Hybrid/EV Battery Pack Coolant Pump "A" Control Performance Within Address 8C Customer Statement: -Speed limitation noticeable when driving in EV mode (Restricting the vehicle speed to approximately 30mph/48kph) -No other warnings are evident within the DIP
2067598/1
Noise From Left Hand Side of the Vehicle When Actuating the Brake pedal Condition: Noise from left hand side of the vehicle when actuating the brake pedal Technical Background: Refer to the video on the Bentley Hub referencing TPI 2067598/- noting the following: The noise is normal operation of the ABS modulator, the modulator actuates with each brake input as part of the blending process between energy regeneration and foundation brake application No further action/diagnosis is required If the noise is as detailed within the video, the customer should be advised that this is normal and expected behaviour
2067489/1
Window side glass - Identification - Standard (STD) or Privacy (PRV) Customer Statement: - Incorrect side glass fitted - Standard (STD) not Privacy (PRV) or visa versa and/or Defects are evident within the glass Technical Background: -The instructions within the Measure section MUST only be followed if the glass is to be replaced
2053177/17
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: -Customers will not be aware of any fault codes -Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle Technical background: -The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants -Should a particular TPI be listed as Archived, the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions within TPI 2053177/- regarding the DTC description and actions which should be conducted (if any).
2067488/1
Veneer/trim mismatch - DISS query requirements. Customer statement / workshop findings: In the event that a trim mismatch is detected for example: - Piano black veneer is supplied although the customer ordered walnut veneer Or - The interior trim colour is incorrect for example: Cricket ball interior trim is supplied although the customer ordered Hotspur The operative should refer to the Technical background section
2062365/2
Bentayga and New Flying Spur Hybrid DTC P103A00 evident Engine Oil Fuel Portion Too High. Customer statement / workshop findings: - Warning message within the DIP - The message asks the customer to warm up engine accompanied by a yellow warning (Figure 1) No other symptoms are experienced. Workshop findings - DTC P103A00 evident - Engine Oil Fuel Portion Too High (Figure 2) Smell of fuel in the engine oil Technical background: The warning is caused by the level of unburnt fuel in the engine oil. This value is calculated by the Engine Control Module (ECM) and is based on the driver usage pattern The more cold starts the Internal Combustion Engine (ICE) is exposed to the higher the chance of fuel making its way into the engine oil via the cylinders When the fuel calculation reaches the pre-programmed amount this then causes the DTC to be triggered
2067418/1
Bentley brand name lettering is no longer applied to the rear calipers (vehicles specified with iron brakes). Customer statement / workshop findings: The rear brake calipers do not have the brand name lettering Bentley applied to the rear brake calipers However The front brake calipers do have the brand name lettering Bentley applied to the front brake calipers Technical background: Refer to the production change section Production change: All vehicles which have been produced post 31.05.2022 onwards do not have the brand name lettering Bentley lettering applied to the rear brake calipers as shown in Figure 1
2067185/1
HV battery will not charge - DTCs stored in address 19 (C11C5F2) and address C6 (P0D6D00) for the High Voltage System. Customer statement / workshop findings HV battery not charging and the following DTCs are stored: Gateway (19) - C11C5F2 High Voltage System wiring circuit 2 open and - U112300 Databus error value received Thermal management (C5) - P0D6D00 A/C compressor motor voltage low Technical background Internal harness failure of the High Voltage cable between the HV battery and the On-board charger
2066246/1
Bentayga/New Flying Spur - DTC P0C4A00 Hybrid/EV Battery Pack Coolant Pump A Control Performance within address 8C. Customer statement / workshop findings: - Speed limitation noticeable when driving in EV mode (Restricting the vehicle speed to approximately 30mph/48kph) - Refer also to the video on the Bentley Hub referencing TPI 2066246/- - No other warnings are evident within the DIP Workshop findings - DTC P0C4A00 Hybrid/EV Battery Pack Coolant Pump "A" Control Performance within Address 8C Battery Regulation Control Unit. Measure: 1) Referring to Rep.Gr 93 - Carry out an Inspection and classification of the Hybrid battery unit AX1.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.