2057841/5
Service Bulletin/Repair Instructions
Windscreen replacement criteria whilst under manufacturers warranty.
Vehicle report
2017 BENTLEY MULSANNE
Service bulletins
164 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
2083061/1
Service Bulletin/Repair Instructions
Real Wear Setup and Guide using VYSOR
2051562/17
Service Bulletin/Repair Instructions
12 volt - Battery condition checks - Battery replacement requirements
2055036/9
Service Bulletin/Repair Instructions
My Bentley - Connected services. Customer statement / workshop findings: Complaints relating to My Bentley connected services.
2028794/10
Service Bulletin/Repair Instructions
Engine coolant mixture - Restrictions on use of desalinated water.
2080097/2
Service Bulletin/Repair Instructions
Service info: Conversion of imported vehicles. Technical background: Conversion of a vehicle for use in a market other than the one for which it was originally designed or intended is not supported. Enquiries related to conversions or retrofits of vehicles from (or to) other markets (e.g. reimport from USA or UK) are not supported by Technical Support. Vehicles are developed and constructed according to specific market requirements of the respective destination country. As the compatibility of different components (e.g. control units) cannot be defined comprehensively regarding their mutual dependence and interaction in the case of modifications, and in order to prevent danger or risks due to constructional changes, support or advice regarding these modifications cannot be provided.
2028808/10
Service Bulletin/Repair Instructions
Service info: Engine oil – Specific oil type and oil consumption reference.
2051187/13
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2075786/3
Service Bulletin/Repair Instructions
Airbag, fire, accident (safety-related enquiry - reporting forms) There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2071131/6
Service Bulletin/Repair Instructions
Measured values - Cycle recording instructions Condition: In some cases Measured value traces may be requested in XML format for analysis by Product Support Technical Background: The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis
2081882/1
Service Bulletin/Repair Instructions
Navigation Map Update Process - MIB2 Infotainment Systems. Customer statement / workshop findings: The customer requests improved and/or newer navigation functionality, including access to the latest navigation maps and updated map content.
2051562/16
Service Bulletin/Repair Instructions
12 volt - Battery condition checks - Battery replacement requirements. Customer statement / workshop findings: 12 volt battery flat or unserviceable
2057841/4
Service Bulletin/Repair Instructions
Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged
2055036/8
Service Bulletin/Repair Instructions
My Bentley - Connected services. Customer statement / workshop findings: Complaints relating to My Bentley connected services
2051562/15
Service Bulletin/Repair Instructions
12 volt - Battery condition checks - Battery replacement requirements. Customer statement / workshop findings: 12 volt battery flat or unserviceable
2055036/7
Service Bulletin/Repair Instructions
My Bentley - Connected services Customer statement / workshop findings: Complaints relating to My Bentley connected services.
2080097/1
Service Bulletin/Repair Instructions
Service info: Conversion of imported vehicles
2051562/14
Service Bulletin/Repair Instructions
12 volt - Battery condition checks - Battery replacement requirements. Condition: 12 volt battery flat or unserviceable
2061195/4
Service Bulletin/Repair Instructions
Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns.
2028808/9
Service Bulletin/Repair Instructions
Service info: Engine oil - Specific oil type and oil consumption reference. Technical Background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
2051187/12
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Condition: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2052785/10
Service Bulletin/Repair Instructions
Brake noise identification
2056407/7
Service Bulletin/Repair Instructions
Running gear - Noise identification. Condition Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system
2075786/2
Service Bulletin/Repair Instructions
Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2028794/9
Service Bulletin/Repair Instructions
Engine coolant mixture - Restrictions on use of desalinated water. Technical Background: An important factor of influencing the cooling system efficiency is the water used in the mixture Due to the different ingredients and characteristics existing in each country or even region, Bentley has decided to define the quality of water for cooling systems
2064337/4
Service Bulletin/Repair Instructions
Usage of E10 fuel. Condition In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI.
2071131/5
Service Bulletin/Repair Instructions
Measured values - Cycle recording instructions. Condition: In some cases Measured value traces may be requested in XML format for analysis by Product Support.
2069806/7
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines
2050542/8
Service Bulletin/Repair Instructions
Front Exterior Lighting Steamed Up/Leaks | 12-24MY.
2069806/6
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines.
2075786/1
Service Bulletin/Repair Instructions
Airbag, fire, accident (safety-related enquiry - reporting forms). There is a reporting obligation in the following cases: • Airbag/belt released/not released • General accident • Fire and scorching damage for all Bentley Vehicle models - every model year.
2077529/2
Service Campaign
Seat Fans Inoperative | All Models | 17-25MY. Condition: Customer may report that the seat ventilation system is not functioning with no airflow from the seat ventilation ducts.
2077519/1
Service Bulletin/Repair Instructions
Exterior Gap and Profile Information | 17 - 25MY. Condition: Customer and/or retailer may raise an issue with panel gaps/alignment or flushness
2077529/1
Service Bulletin/Repair Instructions
Seat Fans Inoperative | All Models | 17-25MY
2051187/11
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Condition: • Poor engine running • Reduced power • Engine warning lamp illuminated • Symptom related DTC’s evident within the applicable engine control unit(s)
2071131/3
Service Bulletin/Repair Instructions
Measured values - Cycle recording instructions. Condition: In some cases, Measured value traces may be requested in XML format for analysis by Product Support
2028794/8
Service Bulletin/Repair Instructions
Engine coolant mixture - Restrictions on use of desalinated water. Technical Background: An important factor of influencing the cooling system efficiency is the water used in the mixture Due to the different ingredients and characteristics existing in each country or even region, Bentley has decided to define the quality of water for cooling systems Demineralised water according to standard VDE 0510 meets all requirements and can be purchased worldwide Therefore undiluted coolant should be mixed in the correct ratio using demineralised water as detailed in Elsa Pro coolant specification, this will detail the ratio and type of coolant to use The use of desalinated water in the engine cooling system is specifically prohibited
2064337/3
Service Bulletin/Repair Instructions
Usage of E10 fuel. Condition: In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI Technical Background: Details on the introduction of E10 fuel which contains 10% ethanol and its usage on Bentley products • All vehicles produced post 1990 Model year can be run using E10 fuel However • All vehicles produced before 1990 Model year MUST NOT use E10 fuel
2028808/8
Service Bulletin/Repair Instructions
Service info: Engine oil - Specific oil type and oil consumption reference. Condition: Engine oil level requires top up between services Technical Background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
2063410/7
Service Bulletin/Repair Instructions
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Condition: Issue suspected with the Infotainment Main unit (5F / J794) - For example: • MMI screen image flickers or goes blank • No response to selection • Audio cuts out
2056407/6
Service Bulletin/Repair Instructions
Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering.
2063017/4
Service Bulletin/Repair Instructions
Road wheel inspection procedure. Condition: In the event a complaint is received regarding road wheel/s condition for example: • Scratches • Corrosion • Damage • Blemishes • Chipping
2063651/4
Service Bulletin/Repair Instructions
Tyre tread/sidewall crack(s)
2052785/9
Service Bulletin/Repair Instructions
Brake noise identification. Technical Background: Brake noises can be attributed to many causes, the most common causes are as follows: • Brake discs or pads are close to their wear limit • New brake pads and/or discs have not been properly bedded in after installation • Aftermarket pads or discs are installed • There is debris such as small stones, grit, road salt or sand between the brake disc and pad • Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time
2071131/2
Service Bulletin/Repair Instructions
Measured values - Cycle recording instructions. Technical background The instructions within the Measure section of this TPI have been generated to guide operatives through the process for recording Measured values in cycles by using self diagnosis, the Instructions also detail how to locate corresponding files which are required for analysis.
2069806/5
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2051562/12
Service Bulletin/Repair Instructions
12 Volt - Battery condition checks. Customer statement / workshop findings: 12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section.
2072055/1
Service Bulletin/Repair Instructions
Spurious DTC identification. Customer statement / workshop findings: Customers will not be aware of any DTCs, workshop operatives may discover spurious DTCs whilst running Guided Fault Finding (GFF) when using ODIS Technical background: To determine the course of action which should be taken the operative should refer to the Bentley Hub referencing the following: Spurious DTC list for TPI 2072055 The document contains all known spurious DTCs for all applicable vehicle variants.
2028794.7
Service Bulletin/Repair Instructions
Engine Coolant Mixture - Restrictions on use of desalinated water Customer Statement: -Engine coolant requires topping up or replacing
2052785.8
Service Bulletin/Repair Instructions
Brake Noise Identification: Customer Statement: -Noise/squeal complaint from the braking system Technical Background: -The noise/squeal can be reproduced and clearly assigned to the braking system
2061195/3
Service Bulletin/Repair Instructions
Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns. Customer statement / workshop findings: The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported. Technical background: The minimum standards check list document within the Measure section is required to capture an accurate description of customer telephone issues.
2063410.5
Service Bulletin/Repair Instructions
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure Customer Statement: Issue suspected with the Infotainment Main unit (5F / J794) - For example: MMI screen image flickers or goes blank No response to selection Audio cuts-out
2063651.3
Service Bulletin/Repair Instructions
Tyre tread/sidewall crack(s) Customer Statement: -Cracks evident in the sidewall and/or tread pattern (See the examples in Figures 1 and 2 showing cracks within the tread pattern)
2050542.7
Service Bulletin/Repair Instructions
Service info: body/equipment: front exterior lighting steamed up/leaks Customer Statement: -1. The lenses of the headlights (illustration 1a) /front fog lamps (illustration 1b) are steamed up/damp from the inside with minor drips. 2. Water is in the headlight (illustration 2a) / front fog lamp (illustration 2b), big drips.
2051776.5
Service Bulletin/Repair Instructions
Key blade can be difficult to remove from key fob. Technical Background: -Deviations in the key blade and key fob assembly could make it difficult to remove the key blade.
2056407.5
Service Bulletin/Repair Instructions
Running gear - Noise identification Workshop Findings: -The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2063017.3
Service Bulletin/Repair Instructions
Road wheel inspection procedure Customer Statement: In the event a complaint is received regarding road wheel/s condition for example: - Scratches - Corrosion - Damage - Blemishes - Chipping Please refer to the onward instructions
2051562/11
Service Bulletin/Repair Instructions
12 Volt - Battery condition checks. Customer statement / workshop findings: 12 volt battery flat or unserviceable Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim refer to the instructions within the Measure section
2053177/19
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customers will not be aware of any fault codes Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle Technical background: The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants Should a particular TPI be listed as Archived, the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions within TPI 2053177/- regarding the DTC description and actions which should be conducted (if any).
2069806/4
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Condition HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin. - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2069806/3
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident.
2069806/2
Service Bulletin/Repair Instructions
HVAC refrigerant leakage suspected Or reports of a damp/musty smell within the cabin - Diagnosis guidelines. Customer statement / workshop findings: HVAC not cooling / HVAC cooling less than expected / HVAC refrigerant leakage confirmed Or The customer reports a damp/musty smell within the cabin Note: For this scenario please see the pre requisites below - Should no HVAC leak be evident and a damp/musty smell has been reported/identified the operative should first confirm that water is not leaking into the cabin please refer to all VIN applicable TPIs particularly TPI 2062622/- - Should there be no water leaks evident, the operative should check the HVAC and body drains for blockages, in the event the drains are blocked the drains must be unblocked, once this has been completed the operative should confirm if the damp/musty smell is still evident. In the event that HVAC cleaning products are required, these MUST be sourced locally. Before using the cleaner the operative must inform the customer of the product which will be used, a neutral fragrance cleaner should be used as the customer may not like the smell of the cleaner should a fragranced product be used Please ensure all supporting information is included within the DISS query when requesting permission to clean the HVAC system including clear photographs and/or videos showing the reported issue, should the required information not be supplied the warranty claim could be cancelled.
2051187/9
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: - Poor engine running - Reduced power - Engine warning lamp illuminated - Symptom related DTCs evident within the applicable engine control unit(s) Technical background: Technical Product Information (TPI) to assist retailers when diagnosing poor engine running or misfires.
2063729/3
Service Bulletin/Repair Instructions
Fitment of control modules from donor vehicles for test purposes. Technical background: If an issue is suspected for one of the control modules listed below: - Onboard supply control unit (J519) - Convenience system central control unit (J393) - Data bus diagnostics interface (J533) - Control unit 1 for Information Electronics (J794) - Control unit in dash panel insert (J285) - Emergency call module control unit (J949) The fitment of donor parts from another vehicle is not advisable and only possible if approved from Product Support via an open DISS query. The donor of parts should only be used as a temporary test VERY IMPORTANT: The ODIS replace routine MUST NOT be carried out under any circumstances.
2070237.1
Service Bulletin/Repair Instructions
Engine Control Module Update - Mulsanne (SC 23/12) Technical Background: -Software update is now available and should be applied to the engine control unit
2053492.10
Service Bulletin/Repair Instructions
Air Spring Fault Finding Guidelines Customer Statement: -The front and/or rear suspension appears to have dropped
2069806.1
Service Bulletin/Repair Instructions
HVAC Refrigerent Leakage - Diagnosis Guidelines Customer Statement: -HVAC not cooling or HVAC cooling less than expected
2053492.9
Service Bulletin/Repair Instructions
Air Spring Fault Finding Customer Statement: -The front and/or rear suspension appears to have dropped.
2036678.5
Service Bulletin/Repair Instructions
Speaker Replacement - Diagnostic Checks Technical Background: -There have been instances where door speakers have been changed under warranty for the complaint of sound distortion, yet when tested by ourselves and the supplier, no fault could be found with the returned unit.
2062622.2
Service Bulletin/Repair Instructions
Water Leak/Wind Noise Diagnosis Customer Statement: -Water leak/wind noise evident -The instructions within this TPI should be followed to assist in the diagnosis of water leaks or wind noise.
2028808.6
Service Bulletin/Repair Instructions
All 12MY Engine Oil- Service Info: Engine Oil - Specific oil type and oil consumption reference, Technical Background: -The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. -The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type -Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering.
2050542.6
Service Bulletin/Repair Instructions
Body/Equipment: Front exterior lighting steamed up/leaks Customer Statement: -The lenses of the headlights/front fog lamps are steamed up/damp from the inside with minor drips
2051187.8
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only Customer Statement: -Poor engine running, reduced power, engine warning lamp illuminated.
2051562.10
Service Bulletin/Repair Instructions
12 Volt - Battery Test Instruction Technical Background: -For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the measure of this section of this TPI.
2053177.18
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List Customer Statement: -Customers will not be aware of any fault codes -Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle.
2061195.2
Service Bulletin/Repair Instructions
Telephone Functionality Complaint- Minimum Standards Required For Analysis of Concerns Customer Statement: -The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported.
2063651.2
Service Bulletin/Repair Instructions
Tyre tread/sidewall crack(s) Customer Statement: -Cracks evident in the sidewall and/or tread pattern Technical Background: -The issue is mainly evident on vehicles with very low usage This is a result of the tyre compound hardening due to the following: -Tyre age -Tyre pressure not adjusted to specification -Low mileage/vehicle usage -Vehicle storage conditions
2055036.6
Service Bulletin/Repair Instructions
My Bentley - Connected Services Technical Background: -Most queries and complaints regarding My Bentley connected services can be resolved by contacting My Bentley Support rather than raising a DISS technical query. My Bentley support have access to additional admin tools and systems to help resolve any queries; and also have ability to raise DISS technical queries if required.
2056407.4
Service Bulletin/Repair Instructions
Running Gear - Noise Identification Customer Statement: -Noise complaint from the suspension and/or steering
2063017.2
Service Bulletin/Repair Instructions
Road Wheel Inspection Procedure: Customer Statement: In the event of a complaint is received regarding road wheel/s condition for example: -scratches -corrosion -damage -blemishes -chipping
2063410.4
Service Bulletin/Repair Instructions
Infotainment Main Unit (5F/J794) fault finding/diagnosis procedure Customer Statement: Issue suspected with the Infotainment Main unit (5F/J794) -MMI screen image flickers or goes blank -No Response to selection -Audio cuts-out
2064337.2
Service Bulletin/Repair Instructions
Usage of E10 Fuel Customer Statement: -In the event a customer asks if E10 fuel can be used, the operative must refer to the Technical background section of this TPI
2051187.7
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only Customer Statement: -Poor engine running, reduced power, engine warning lamp illuminated.
2051562.9
Service Bulletin/Repair Instructions
12 Volt- Battery Condition Checks. Technical background For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI.
2053492/8
Service Bulletin/Repair Instructions
Air spring fault finding Customer Statement: -The front and/or rear suspension appears to have dropped Technical Background: -Bentley vehicles which are applicable to this TPI are fitted with air springs as part of the suspension system. Should air leak from the air spring dampers, this will cause the suspension to drop. However, the dropping of the suspension does not necessarily mean that the air spring is faulty. -The Measure section of this TPI describes how and where to check for air leaks on the front and rear air springs, the air supply unit, pipes, valve unit and air reservoirs. This includes potential air leak points on the air spring dampers and also the locations of an air leak that can be repaired without the need to replace an air spring damper.
2053177/17
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: -Customers will not be aware of any fault codes -Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle Technical background: -The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants -Should a particular TPI be listed as Archived, the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions within TPI 2053177/- regarding the DTC description and actions which should be conducted (if any).
2067538/1
Service Bulletin/Repair Instructions
Bentayga, Mulsanne and New Flying Spur - Rear Entertainment Tablet - Battery Replacement. Customer statement / workshop findings: Message on Bentley Rear Entertainment Tablet - The battery is defective Please contact your Bentley dealer. Technical background: The Bentley Rear Entertainment Tablet incorporates battery voltage protection, under certain conditions this system can prevent the internal battery from accepting a charge current, this would normally require the Tablet to be replaced. This TPI provides the necessary information to replace the Tablet internal battery pack.
2055036/5
Service Bulletin/Repair Instructions
My Bentley - Connected services. Customer statement / workshop findings: Complaints relating to My Bentley connected services. Technical background: Most queries and complaints regarding My Bentley connected services can be resolved by contacting My Bentley Support rather than raising a DISS technical query. My Bentley support have access to additional admin tools and systems to help resolve any queries; and also have the ability to raise DISS technical queries if required.
2052785/7
Service Bulletin/Repair Instructions
Brake noise identification. Customer statement: Noise complaint from the braking system. Workshop findings: The noise can be reproduced and clearly assigned to the braking system. Service: Note: For correct diagnosis and repair the attached Flowchart must be followed. 1. Check the overall condition of the brakes to determine if the brake noise can be attributed to one of the causes listed in the Technical Background section of this TPI. If the noise is not a result of one these causes, proceed with point 2. 2. Record the noise and frequency For the frequency analysis and the noise recording we recommend using the Chassis Ear Tool WT 10437. To record the noise and measure the frequency using WT 10437 Chassis Ear Tool follow these instructions; Refer to File recording in the WT 10437 user instructions.
2065604/1
Service Bulletin/Repair Instructions
Suspicion that control units or services have been influenced by third parties. Customer statement / workshop findings: In the event a customer complaint is received relating to a suspicion that control units or services have been influenced by third parties the instructions within this TPI should be followed. Technical background: A suspicion that control units or services have been influenced by third parties means that unauthorised people or groups may have gained access to a vehicle's control unit(s) or online services and may have manipulated them in such a way that may compromise customer data confidentiality or the operation of the vehicle and/or online services. When investigating potential third party influences of control units or online services, it is important to take all normal diagnostic measures to rule out a normal functional error or misuse of the system by the user
2063410/3
Service Bulletin/Repair Instructions
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Customer statement / workshop findings Issue suspected with the Infotainment Main unit (5F / J794) - For example: - MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background The operative should continue as follows: - Complete the questionnaire within the Measure section of this TPI (Part 1) once completed the questionnaire should be attached to an existing or already open DISS query - Once the questionnaire is complete, the operative should refer to (Part 2) within the Measure section regarding fault finding/diagnosis of the Infotainment Main unit (5F / J794)
2051562/8
Service Bulletin/Repair Instructions
12 Volt - Battery condition checks. Customer statement / workshop findings: 12 Volt Battery test instruction Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI
2055036/4
Service Bulletin/Repair Instructions
My Bentley - Connected services. Customer statement / workshop findings: Complaints relating to My Bentley connected services. Technical background: Most queries and complaints regarding My Bentley connected services can be resolved by contacting My Bentley Support rather than raising a DISS technical query.
2056582/4
Service Bulletin/Repair Instructions
Interior trim - Creak and rattle - Noise identification Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2057841/3
Service Bulletin/Repair Instructions
Windscreen replacement criteria whilst under manufacturers warranty Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage)
2063410/2
Service Bulletin/Repair Instructions
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure Customer statement / workshop findings: Issue suspected with the Infotainment Main unit (5F / J794) - For example: -MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background: Refer to the Measure section regarding any Infotainment Main unit (5F / J794) fault finding/diagnosis
2028808/5
Service Bulletin/Repair Instructions
Service info: Engine oil Specific oil type and oil consumption reference. Customer statement / workshop findings: Engine oil level requires top up between services Technical background: The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
2033864/6
Service Bulletin/Repair Instructions
Customer statement / workshop findings: Unable to remove Accessory valve caps, Figure 1 shows an example of the caps. Technical background: We have observed instances where the caps have been difficult to remove once fitted, the issue is caused by corrosion. The valve stem itself is made from aluminium and the accessory valve caps are chromium plated brass, it is possible under certain environmental conditions, particularly winter road salt, for corrosion to take place between these dissimilar metals. Measure: The solution is to apply a thin smear of silicon-based grease, such as Dow Corning high vacuum grease, to the external threads of the valve stem prior to fitting the accessory valve cap. Grease should be applied any time the cap is removed and grease is not evident
2036678/4
Service Bulletin/Repair Instructions
Speaker Replacement - Diagnostic checks. Customer statement / workshop findings: Audio output from speakers is distorted Technical background: There have been instances where door speakers have been changed under warranty for the complaint of sound distortion, yet when tested by ourselves and the supplier, no fault could be found with the returned unit. Production change: All speakers are subjected to a dynamic test and the individual results recorded for future reference
2050542/5
Service Bulletin/Repair Instructions
Service info: body/equipment: front exterior lighting steamed up/leaks. Customer statement / workshop findings Customer statement: 1. The lenses of the headlights (illustration 1a) /front fog lamps (illustration 1b) are steamed up/damp from the inside with minor drips. or 2. Water is in the headlight (illustration 2a) / front fog lamp (illustration 2b), big drips. Technical background 1. Damp air settles on the inner lens of the headlights/fog lamps, with recognisable misting in certain weather conditions (comparable with the steaming up of spectacle lenses when entering a warm room in winter or of the bathroom mirror after a shower). 2. Leak on the headlights/front fog lamps. For example through open covers, a damaged seal of the cap or similar.
2051187/6
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only. Customer statement / workshop findings: Poor engine running, reduced power, engine warning lamp illuminated. Technical background: Technical Product Information (TPI) to assist Retailers when diagnosing poor engine running or misfire. Measure: The following TPI should be carried out sequentially to ensure the root cause and analysis of the concern are identified without unnecessary work or repetitive actions taking place.
2051562/7
Service Bulletin/Repair Instructions
12 Volt - Battery condition checks. Customer statement / workshop findings: 12 Volt Battery test instruction Technical background: For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI
2053177/16
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background The operative should refer to the Bentley Hub referencing TPI 2053177/- The document (loaded onto the Hub) contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the document (loaded onto the Hub) regarding the DTC description and actions (if any) which should be conducted
2053492/7
Service Bulletin/Repair Instructions
Air spring fault finding. Customer statement / workshop findings: The front and/or rear suspension appears to have dropped. Technical background: The list of Bentley vehicles below are fitted with air springs as part of the suspension system. Should air leak from the air springs, this will cause the suspension to drop. However, the dropping of the suspension does not necessarily mean that the air spring is faulty. The Measure section of this TPI describes how and where to check for air leaks on the front and rear air springs, the air pump compressor, pipes, valve unit and air reservoirs. This includes potential air leak points on the air springs and also the locations of an air leak that can be repaired without the need to replace an air spring.
2056407/3
Service Bulletin/Repair Instructions
Running gear - Noise identification. Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system
2063651/1
Service Bulletin/Repair Instructions
Tyre tread/sidewall crack(s). Customer statement / workshop findings: Cracks evident in the sidewall and/or tread pattern (See the examples in Figures 1 and 2 showing cracks within the tread pattern). The issue is mainly evident on vehicles with very low usage This is a result of the tyre compound hardening due to the following: - Tyre age - Tyre pressure not adjusted to specification - Low mileage/vehicle usage - Vehicle storage conditions
2063410/1
Service Bulletin/Repair Instructions
Infotainment Main unit (5F / J794) fault finding/diagnosis procedure. Customer statement / workshop findings: Issue suspected with the Infotainment Main unit (5F / J794) - For example: - MMI screen image flickers or goes blank - No response to selection - Audio cuts-out Technical background: Refer to the Measure section regarding any Infotainment Main unit (5F / J794) fault finding/diagnosis
2053177/15
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted.
2063017/1
Service Bulletin/Repair Instructions
Road wheel inspection procedure: In the event a complaint is received regarding road wheel/s condition for example: - Scratches - Corrosion - Damage - Blemishes - Chipping Please refer to the onward instructions. Technical background: Do not consider submitting a warranty claim for a road wheel manufacturing defect without first referencing and understanding the contents of this document. Any defect or concern found either outside the guidelines stated in this document or not clearly stated as acceptable to support a warranty claim, will be the responsibility of the retailer regarding component replacement. Any road wheels deemed as having no issues found relating to a manufacturing defect (including curbing) will have the applicable claim rejected
2053177/14
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted
2062622/1
Service Bulletin/Repair Instructions
Water leak/wind noise diagnosis. Customer statement / workshop findings: Water leak/wind noise evident Technical background: The instructions within the Measure section should be followed to assist in the diagnosis of water leaks or wind noise
2053931/4
Service Bulletin/Repair Instructions
Unable to stream Infotainment media to the rear seat entertainment system. Customer statement / workshop findings Unable to stream media to the rear seat entertainment system from the Infotainment system Technical background The ability to steam CD/DVD and TV to the rear seat entertainment system from the Infotainment system is no longer available from 19 Model Year onwards.
2053931/3
Service Bulletin/Repair Instructions
Unable to stream Infotainment media to the rear seat entertainment system. Customer statement / workshop findings: Unable to stream media to the rear seat entertainment system from the Infotainment system Technical background: The ability to steam CD/DVD and TV to the rear seat entertainment system from the Infotainment system is no longer available from 19 Model Year onwards.
2051562/6
Service Bulletin/Repair Instructions
All Models - 12 Volt Battery condition checks. Technical background For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI.
2061195/1
Service Bulletin/Repair Instructions
Telephone Functionality Complaint - Minimum Standards Required For Analysis Of Concerns. Customer statement / workshop findings: The feedback method within this TPI is required should a complaint of telephone functionality and/or quality be reported. Technical background: The minimum standards check list document within the Measure section is required to capture an accurate description of customer telephone issues.
2053177/13
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List. Customer statement / workshop findings Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted
2058173/2
Service Bulletin/Repair Instructions
Electrical switch replacement guidelines. Customer statement/workshop findings: Electrical switch suspected as defective This TPI is not applicable to suspected faulty control units or any component related to the passive restraint system in particular the airbag system Technical background: Prior to replacing an electrical switch refer to the Measure section of this TPI
2058586/2
Service Bulletin/Repair Instructions
Bentayga and Mulsanne - Rear Entertainment Tablet - Battery Replacement. Customer statement / workshop findings: Message on Bentley Rear Entertainment Tablet: The battery is defective Please contact your Bentley dealer. Technical background: The Bentley Rear Entertainment Tablet incorporates battery voltage protection, under certain conditions this system can prevent the internal battery from accepting a charge current, this would normally require the Tablet to be replaced. This TPI provides the necessary information to replace the Tablet internal battery pack.
2060823/1
Service Bulletin/Repair Instructions
Radio: Reception complaints. Customer statement / workshop findings: All complaints which are related to radio reception issues Technical background: Complaints about the radio reception can have many causes. The radio reception strength/quality at the vehicle location can be an important issue. To process such complaints as effectively as possible it is important to precisely record the circumstances when a complaint occurs. The attached check list is available for this purpose. Please ensure the instructions within the Measure section are strictly adhered to
2058586/1
Service Bulletin/Repair Instructions
Bentayga and Mulsanne - Rear Entertainment Tablet - Battery Replacement Customer statement / workshop findings Message on Bentley Rear Entertainment Tablet The battery is defective Please contact your Bentley dealer . Bentley Rear Entertainment Tablet will not accept a charge current. Technical background The Bentley Rear Entertainment Tablet incorporates battery voltage protection, under certain conditions this system can prevent the internal battery from accepting a charge current, this would normally require the Tablet to be replaced. This TPI provides the necessary information to replace the Tablet internal battery pack.
2052785/5
Service Bulletin/Repair Instructions
Brake noise identification. Customer statement: Noise complaint from the braking system. Workshop findings: The noise can be reproduced and clearly assigned to the braking system. Technical Background: Brake noises can be attributed to many causes. Eight of the most common causes are: 1. Brake discs or pads are close to their wear limit. 2. New brake pads and/or discs have not been properly bedded in after installation. 3. Aftermarket pads or discs are installed. 4. There is debris such as small stones, grit, road salt or sand between the brake disc and pad. 5. Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time (Figure 1).
2043897/2
Service Bulletin/Repair Instructions
Mulsanne - No volume. Customer statement/workshop findings: No volume/sound from the Infotainment system Technical background: Software update required to reinstall the functionality of the sound/volume
2053177/12
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List Condition: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical Background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted
2028808/4
Service Bulletin/Repair Instructions
Engine oil. Specific oil type and oil consumption reference. Customer statement / workshop findings: Engine oil level requires to:p up between services. Technical background The use of the correct oil for each engine type is critical for its continued performance, reliability and ultimately warranty. The workshop manual should always be the first point of reference, ensuring the correct lubricant is used for each specific model year and engine type Should oil be required the parts catalogue must be referred to ensuring the correct VIN is always used when ordering
2053177/11
Service Bulletin/Repair Instructions
Customer statement / workshop findings Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. All Vehicle Variants - Spurious DTC List Technical background The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted
2056582/3
Service Bulletin/Repair Instructions
Interior trim - Creak and rattle - Noise identification. Customer statement / workshop findings: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work
2053492/6
Service Bulletin/Repair Instructions
Air spring fault finding. Customer statement / workshop findings: The front and/or rear suspension appears to have dropped. Technical background: The list of Bentley vehicles below are fitted with air springs as part of the suspension system. Should air leak from the air springs, this will cause the suspension to drop. However, the dropping of the suspension does not necessarily mean that the air spring is faulty. TheMeasure section of this TPI describes how and where to check for air leaks on the front and rear air springs, the air pump compressor, pipes, valve unit and air reservoirs. This includes potential air leak points on the air springs and also the locations of an air leak that can be repaired without the need to replace an air spring. These checks should be carried out in conjunction with the Elsapro procedure Air suspension: To check with the use of the special tool Air suspension leak tester VAS 751 001 shown in the image below as item ( 1). Refer to Elsapro, Repair Group 43, Air suspension To check.
2057841/2
Service Bulletin/Repair Instructions
Windscreen replacement criteria whilst under manufacturers warranty. Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged
2053177/10
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List Condition: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical Background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted Service: During routine diagnostic interrogation of vehicle systems use the attached document to determine the course of action to be taken.
2058173/1
Service Bulletin/Repair Instructions
Electrical switch replacement guidelines Customer statement / workshop findings: Electrical switch suspected as defective This TPI is not applicable to suspected faulty control units or any component related to the passive restraint system in particular the airbag system Technical background: Prior to replacing an electrical switch refer to the Measure section of this TPI
2050542/4
Service Bulletin/Repair Instructions
Customer statement: 1. The lenses of the headlights (illustration 1a) /front fog lamps (illustration 1b) are steamed up/damp from the inside with minor drips. 2. Water is in the headlight (illustration 2a) / front fog lamp (illustration 2b), big drips. Technical Background 1. Damp air settles on the inner lens of the headlights/fog lamps, with recognisable misting in certain weather conditions (comparable with the steaming up of spectacle lenses when entering a warm room in winter or of the bathroom mirror after a shower). 2. Leak on the headlights/front fog lamps. For example through open covers, a damaged seal of the cap or similar.
2051187/5
Service Bulletin/Repair Instructions
Condition: Poor engine running, reduced power, engine warning lamp illuminated. Technical Background: Technical Product Information (TPI) to assist Retailers when diagnosing poor engine running or misfires. Service: The following TPI should be carried out sequentially to ensure the root cause and analysis of the concern are identified without unnecessary work or repetitive actions taking place.
2051562/5
Service Bulletin/Repair Instructions
Condition: 12 Volt Battery test instruction Technical Background: For all 12 volt battery issues relating to warranty or a parts warranty claim, a DISS query MUST be raised prior to battery replacement, refer to the instructions within the Measure section of this TPI
2052785/4
Service Bulletin/Repair Instructions
Condition: Customer statement: Noise complaint from the braking system. Workshop findings: The noise can be reproduced and clearly assigned to the braking system. Technical Background Brake noises can be attributed to many causes. Eight of the most common causes are: 1. Brake discs or pads are close to their wear limit. 2. New brake pads and/or discs have not been properly bedded in after installation. 3. Aftermarket pads or discs are installed. 4. There is debris such as small stones, grit, road salt or sand between the brake disc and pad. 5. Discs are covered in rust. Rust can form when the vehicle has been stationary for long periods of time (Figure 1). 6. Discs have a groove in them (Figure 2) 7. There is chemical contamination on the braking surface of the disc due to a wheel or tyre cleaner being sprayed directly onto the disc (Figure 3). 8. There are pad marks on the brake disc as a result of the brake pad material transferring to the discs. This can occur when a vehicle has been stood for long periods of time in a wet or snowy environment (Figure 4).
2053177/6
Service Bulletin/Repair Instructions
Condition: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical Background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted Service: During routine diagnostic interrogation of vehicle systems use the attached document to determine the course of action to be taken.
2053492/5
Service Bulletin/Repair Instructions
Condition: The front and/or rear suspension appears to have dropped. Technical Background: The list of Bentley vehicles below are fitted with air springs as part of the suspension system. Should air leak from the air springs, this will cause the suspension to drop. However, the dropping of the suspension does not necessarily mean that the air spring is faulty. The Measure section of this TPI describes how and where to check for air leaks on the front and rear air springs, the air pump compressor, pipes, valve unit and air reservoirs. This includes potential air leak points on the air springs and also the locations of an air leak that can be repaired without the need to replace an air spring. Please follow and complete the check list within the Measure section of this TPI to help in diagnosing the issue (the check list does not need to be sent as an attachment should a DISS technical query be raised) . Should a leak be found from an air spring, compressor, valve unit or reservoir, please raise a DISS technical query and include as much information as possible including photograph/s of the leak/s location. Once the DISS ticket has been submitted please await clarification from your TSC before commencing with replacing any of the suspected faulty air springs. Mandatory reporting is applicable for all air spring related issues.
2055036/2
Service Bulletin/Repair Instructions
Condition: Complaints relating to My Bentley connected services. Technical Background: Most queries and complaints regarding My Bentley connected services can be resolved by contacting My Bentley Support rather than raising a DISS technical query.
2056407/2
Service Bulletin/Repair Instructions
Condition: Customer statement: Noise complaint from the suspension and/or steering Workshop findings: The noise can be reproduced and clearly assigned to the suspension system from either of the axles And/or The noise can be reproduced and clearly assigned to the steering system Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted including the modification of the engine control modules (chip tuning) Check the history of the vehicle to confirm Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if any TPIs are applicable to the customers complaint/issue, should an applicable TPI be available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required) For correct diagnosis and repair, the attached Flowchart must be followed in conjunction with the Measure section of this TPI
2056582/2
Service Bulletin/Repair Instructions
Condition: Customer statement: Noise complaint from the interior Workshop findings: The noise can be reproduced and clearly assigned to the interior Prior to starting the instructions within this TPI, the Retailer must check and confirm the vehicle is in standard factory condition and has not had any non-approved aftermarket modifications conducted Should any aftermarket modifications be found, the Retailer must make Product Support aware by raising a DISS query to report the details of the modification, you must then await feedback from Product Support before conducting any further work Technical Background It is the retailers responsibility to check and confirm if there are any TPIs which are applicable to the customers complaint/issue if there is an applicable TPI available, apply it and complete a DISS complaint to include Workshop findings only (No repair query required). For correct diagnosis and repair the attached Flowchart must be followed in conjunction with the Measure section of this TPI
2057991/1
Service Bulletin/Repair Instructions
Customer statement / workshop findings: Malfunction Indicator Lamp (MIL) illuminated on driver instrument panel. Engine runs unevenly when starting from cold. Camshaft position Diagnostic Trouble Codes (DTCs) stored within Engine Control Unit (ECU). Technical background: When the engine is cold increased friction within the camshaft adjuster unit may result in camshaft position DTCs being stored within the ECU. The concern can be resolved by replacing the camshaft timing gear with a B level part which utilises an internal return spring with higher rate. See Parts information below. There are many possible DTCs related to this failure, the following is a typical example P001200 : A Camshaft position (Bank 1) timing over-retarded.
2053177/5
Service Bulletin/Repair Instructions
Customer statement / workshop findings: Customer will not be aware of any fault codes. Workshop may discover spurious fault codes whilst running a Diagnostic Trouble Code (DTC) log as part of other investigations on the vehicle. Technical background: The attached document contains all of the current known Spurious DTCs for all vehicle variants. Should a particular TPI be listed as Archived within the attached document the TPI can no longer be viewed within Elsa pro, in this case please refer to the instructions with the attached document regarding the DTC description and actions (if any) which should be conducted Measure: During routine diagnostic interrogation of vehicle systems use the attached document to determine the course of action to be taken.
2057841/1
Service Bulletin/Repair Instructions
Customer statement / workshop findings: Windscreen cracked/damaged Technical background: Please refer to the instructions within the Measure section of this TPI in the event that a windscreen is cracked/damaged NOTE: The instructions MUST be followed to help the retailer clarify if the windscreen should be replaced under manufacturers warranty (Stress crack) or Customer pay/insurance (external influence damage) Measure: Identification In the event the windscreen is identified as cracked/damaged it is imperative the inspector of the cracked/damaged screen can determine if the crack was caused by external influences (stone chips) OR the screen is cracked/damaged due to a stress crack
2057664/1
Service Bulletin/Repair Instructions
Customer statement / workshop findings: Clicking noise from the right and/or left front corner with steering input. Technical background: Verify that the customer complaint matches the video within the Bentley Hub Reference TPI Transaction number 2057664/1. Should the customer complaint match the issue refer to the Measure section of this TPI. Measure: 1) Replace the affected front steering upright and front wheel bearing.
2053745-1
Service Bulletin/Repair Instructions
Mulsanne - Infotainment unit software update (SC19/13)
2024681-3
Service Bulletin/Repair Instructions
PDI-Deactivating Transport and Loading modes
2030349-3
Service Bulletin/Repair Instructions
Mulsanne steering shimmy/vibration - 21 Inch wheels only (USA)
2051187.3
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only
2051562.4
Service Bulletin/Repair Instructions
12 Volt - Battery condition checks
2052785.3
Service Bulletin/Repair Instructions
Brake noise identification
2053177.3
Service Bulletin/Repair Instructions
All Vehicle Variants - Spurious DTC List
2053492.3
Service Bulletin/Repair Instructions
Air spring fault finding
2053492.4
Service Bulletin/Repair Instructions
Air spring fault finding
2055036.1
Service Bulletin/Repair Instructions
My Bentley - Connected services
2055070.1
Service Bulletin/Repair Instructions
Bluetooth headphones not working
2052785-1
Service Bulletin/Repair Instructions
Brake noise identification
2051562.1
Service Bulletin/Repair Instructions
12 Volt - Battery condition checks
2051187.1
Service Bulletin/Repair Instructions
Poor Engine Running Complaints (Misfires) Petrol Engines Only
2050542.1
Service Bulletin/Repair Instructions
Service info: body/equipment: front exterior lighting steamed up/leaks
20497461
Service Bulletin/Repair Instructions
SiriusXM Serial Number (SC17/18)
2028254.2
Service Bulletin/Repair Instructions
Battery testing-Use of DIN figure when testing OE batteries under warranty
2048803.1
Service Bulletin/Repair Instructions
Mulsanne Flying "B" Radiator Grille Mascot - Failure to Latch And Hold
2030349.2
Service Bulletin/Repair Instructions
Mulsanne steering shimmy/vibration - 21 Inch wheels only (USA)
2024811/2
Service Bulletin/Repair Instructions
Gearbox code P1703 not clearing in Guided Fault finding Condition: There is no customer complaint the fault code is logged as a result of connecting the diagnostic tester When the fault memory is read using Guided Fault finding the following codes may be logged: P170300 Limp home, control unit reset (located in diagnostic address 02 Transmission control module) U1111 Function limitation due to missing message (located in diagnostic address 81 Gear Shift Control Module (GSM) Technical Background: Due to a communication error between the tester and the transmission control module the above faults may be logged even though there is no problem with the vehicles gearbox system. If these faults are logged and there is no gearbox problem reported, clear these codes using vehicle Self Diagnosis.
2038035/1
Service Bulletin/Repair Instructions
Continental Series, Flying Spur and Mulsanne - Main harness identification Customer statement / workshop findings: Should an issue be diagnosed or reported regarding any part of the vehicles main harness or engine harness resulting in a requirement to raise a DISS ticket, please follow all instructions within this TPI to ensure that your Bentley Motors Technical Service Centre (TSC) receives all required and relevant information. Technical background: In order for the Bentley Motors Technical Service Centre (TSC) to resolve any issues relating to the vehicles main harness or engine harness please follow the instructions within this TPI. Refer to Section 1 for the main vehicle harness identification label location Refer to Section 2 for the engine harness identification label location
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.