B064326
Other
Fastening Elements Return
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
B064326
Fastening Elements Return
B063926
Starter Generator Return
B651426
The vehicle may experience various operational issues with Apple CarPlay Projected Modes such as: Dropped connections No automatic reconnection Display errors
B652025
After replacing the Multifunctional Display (MFD), the Central Information Display (CID) is black. The backlight of the CID is illuminated, and touch function does register an audible sound.
B062926
Window Border Cover Return
B062826
Brake Hose Return
InVeh-InApp-Comm
It was determined that the lane change warning in the exterior mirror may not light up bright enough. To correct this issue, the vehicle’s software needs to be updated.
B512224
On the main door seal, detachment behaviorcan be detected at the sealing joint . Over time, the seal gradually and increasinglydetaches which can cause it to- Dangle Become visible to the customer Prevent the door from closing properly
B641325
When performing a vehicle test, diagnostic trouble code “ 8013FE Software run time error” is found in theIHKA module. If this fault is set for two consecutive life cycles, it will turn on the check engine light on vehicles with an I-level lower than 24-11-570. This fault memory entry does not cause an impairment of functionality of the automatic air conditioningsystem.
B340925
There may be an internal leakage in the brake fluid expansion tank (aka brake fluid reservoir). In the rarecase of a leak, the filling level sensor might malfunction over a relatively long period of time.
B111025
Coolant is leaking from the oil filter housing.
B652525
After the software update to I-level version …25-07-530, the Alexa app may disappear from the App Menu in the head unit (HU-H5).
B840625
In some situations, an emergency call may be triggered in the vehicle without either the customer pressing the SOS Call button, or an airbag deployment event. In some cases, the customer may not even be inside the vehicle.
B065225
Supply Module Return
B651925
Central Information Display (CID) in the vehicle is black or only displays “BMW”. The head unit (HU-H5) is not responding in ISTA. Additionally, the Receiver Audio Module (RAM), Instrument Cluster (KOMBI) and Telematic Module 4 (TCB4) may not be responding in ISTA.
B410424
A groaning sound from the front of the vehicle while driving can be heard, particularly while cornering. The groaning sound can be heard in the A-pillar/instrument panel area.
B410725
While driving on a smooth and/or uneven road, a “cracking” sound is heard from the rear wheel arch area (highlighted in orange) on either the right or left side.
B064325
Oil Line Return
B651125
When navigation is selected, only the start animation with the text “Starting navigation system...” isdisplayed. The Navigation application does not start. This only applies to vehicles where Navigation hasbeen enabled and has been verified to work previously.
B270220
There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads
B653524
Customers may report that the Central Information Display (CID) side of the Multifunction Display flickersonce on and off. This flickering is not continuous but may occur once every 15 to 50 seconds. No fault memory entry is stored for this customer complaint.
B160125
Please have the Integrated Fuel Module control unit (IFM) programmed in the vehicles concerned(according to the vehicle identification number selection), if possible, before vehicle delivery.
B513019
A groaning noise is present from the door frame of any door, most commonly when driving over rough roadsor during body flex. This situation may be worse in vehicles which are regularly waxed in th e area of the door jamb.
B650825
Central Information Display (CID) side of the Multifunction Display may intermittently black out.
B511223
A vehicle listed above may arrive with a Check Control Message (CCM), and/or malfunction indicator lamp(MIL) illuminated. After carrying out the vehicle test, one or more of the stored faults indicate that the operation of the frontbottom active air flap is obstructed or blocked.
B340225
Due to a manufacturing defect, there might be an internal leakage of the brake fluid expansion tank. In therare case that there is a leakage, the filling level sensor might malfunction over a relatively long period oftime .
B062325
Floor Mat Return
B061325
Starter Return
eB340225
Delivery Stop - Brake Fluid Expansion Tank
B520325
The driver’s seat heater doesn’t work after the installation of a replacement seat harness part number (P/N)52 10 7 414 701.
B520525
The customer states: The driver’s seat will not return to its last saved position. No seat memory. The heated seats settings in the menu are missing/different than in their previous BMW vehicle. They canno longer select, under the climate rules, at what temperature Fahrenheit the heated seats willautomatically turn on. Certain other “apps” and functions are not available The driver’s seat moves to an unknown memory position
B160125A
Update - Delivery Stop: Integrated Fuel Module
B160125B
B16 01 25 Integrated Fuel Module Delivery Stop Software Update
B650225
If the Head-Up Display (HUD) is deactivated when Navigation View is selected, upon reactivation the Head-Up Display (HUD) will revert to the Standard View. This is most noticeable when the Head-Up Display (HUD) deactivates for automatic mandatory reasons, such as rear camera activation or emergency call activation.
B110924
Delivery Stop Flywheel
B067724
Heat Management Module Return
B612624
DELIVERY STOP: UNDERBODY GROUND CABLE
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.