Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
MC55297495
Vehicle battery not charged despite the battery charger being connected to the on-board socket (manufactured before 2009)Headlights and rear lights light up intermittently despite the ignition being switched off and the battery charger being connected to the on-board socket.
MC210221
The clutch plates do not tolerate frequent and prolonged operation at the clutch friction zone, causing a shorter service life in motorcycles that see intensive use
MC59759165
Transmission rattles when the engine is at operating temperature and idling.
MC62133778
Map data should be stored on a 64 GB SD card. In GARMIN Express the note appears that a maximum of 32 GB is possible.
MC62332524
Occasionally it's not possible to downshift the transmission; especially from 3rd to 2nd gear.
MC6100215
Details: BMW Motorrad has ascertained that in the process of assembly, on some motorcycles even though ABS connector (2) was connected to ABS pressure modulator (3), retaining clip (1) is not correctly engaged in the lock (black arrow).
MC53055102
Gear lever does not return to neutral position. Uneven faces on shifting pawl.
MC1965083203
Oil leaking from around the oil sump gasket.
SIB-63-02-01
BMW: PROCEDURE FOR DETERMINING AND REPLACING INCANDESCENT AND HALOGEN LIGHT BULBS UNDER WARRANTY. *RM
SIB-16-02-09
BMW VEHICLES: FUEL LEVEL SENSOR REPAIRS. WHERE IT IS NECESSARY TO REPLACE THE RIGHT OR THE LEFT SIDE FUEL LEVEL SENSOR DUE TO A FAILURE, THE ENTIRE PUMP AND HOUSING OR DELIVERY UNIT (SUCTION JET ASSEMBLY) DO NOT NEED TO BE REPLACED AS WELL. IN SOME CASES, EPC DOES NOT SHOW THAT THE REPAIR KIT IS AVAILABLE SEPARATELY IN THE ILLUSTRATION, BUT IT IS AVAILABLE IN THE PARTS DESCRIPTION. ALL MODELS. NO MODEL YEARS LISTED. *PE
TSB-17-001-09
BMW MOTORCYCLE: THE COOLANT INLET HOSE IS NOT COMPLIANT WITH THE APPLICABLE BMW SPECIFICATIONS. ENGINE OPERATION CAN CAUSE THE INLET HOSE TO WIDEN AND BECOME CORRESPONDINGLY SHORTER; OVERTIME THIS CONTRACTION IN LENGTH CAN CAUSE THE HOSE TO WORK BACK OFF THE WATER PUMP NOZZLE FOR ENOUGH TO ALLOW COOLANT TO ESCAPE. NO MODEL YEARS LISTED. *PE
SB-61-003-08
BMW VEHICLES: ROUTING ABS FRONT WHEEL SPEED SENSOR CABLE. THE WIRING HARNESS FRONT WHEEL SPEED SENSOR PERIPHERY PLUG CONNECTION IS MOUNTED ON THE FORK COVER AT THE BOTTOM. *PE
13-003-08
BMW MOTORCYCLE: REPLACEMENT OF FUEL-PRESSURE SENSOR. CHECK OF POSITION OF PROTECTIVE FILM (F-800 GS ONLY). *PE
SB-00-021-07
BMW MOTORCYCLE: ENGINE FUELS CONTAINING ETHANOL. BMW MOTORRAD HAS NO OBJECTION TO THE USE OF SI ENGINE FUELS CONTAINING UP TO A MAXIMUM OF 10% ETHANOL AND IMPOSES NO WARRANTY RESTRICTIONS. ETHANOL MIXTURES IN PROPORTIONS HIGHER THAN 10% CAN HAVE AN ADVERSE EFFECT ON PERFORMANCE AND CAN RESULT IN DAMAGE TO COMPONENTS THAT COME INTO CONTRACT WITH FUEL. NO WARRANTY CLAIMS WHATSOEVER FOR DAMAGE CAUSED IN THIS WAY WILL BE ACCEPTED. NO MODEL YEARS LISTED. *PE
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.