MCAS1726
Other
Return Combination Switch
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
MCAS1726
Return Combination Switch
MCSTOP320007
UPDATE DELIVERY STOP: STOP320007 – M 1000 R and XR Steering Damper Analysis
MC360125
When turning the wheel slowly, you might hear rattling noises from inside. Sometimes during manufacturing ,the core doesn't fully detach from the wheel. These core pieces can break off and rattle inside the wheel.
MCAS6525
Steering Damper Inspection and Return
MC330225
Customer complains when the bike parked and without the engine running; while compressing and lettingthe rear suspension rebound, there is a loud audible cracking or groaning noise. This is either due to low grease levels on the bearing positions or bearing position damage.
MC330325
Traces of wear seem to be found on the needle bearing bush of the rear suspension strut. The ZnNi (zinc-nickel) corrosion protection coating can be worn in the area of the race for the needles of thebearing and does not constitute bearing bush wear.
MC710125
The Emission Label control information for US Model code (0P53) contains faulty EVAP and Permeationdata. The affected vehicles have been placed under the delivery stop STOP710017 associated with campaignnumber 0071240000, which will be lifted upon completion of this technical campaign.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.