Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
B011724
Warranty Program/Extension
The Fuel Injector Condition-Specific Repair Coverage Program applies to qualifying repairs for the required replacement of one or more the fuel injectors which were determined to have failed due to a buildup of external corrosion in the engine’s center fuel injector bore area that resulted after this location was periodically contaminated by engine coolant residue over time. This special program’s coverage is 15 years / 150,000 miles as determined from the vehicle's original in-service / first delivery date.
B720417
Warranty Program/Extension
The Supplemental Restraint Systems (SRS) Front Passenger’s Seat Occupancy Capacitive Interior Sensor (CIS) Mat for defects in materials and/or workmanship that causes a false seat occupancy alert to occur has been extended to 10 years / 120,000 miles as determined from the vehicle's original inservice / first delivery date.
B340921
Service Bulletin/Repair Instructions
A turbine-like noise can be heard from the rear axle while deceleration during the first 300 miles of operation when braking from low speed.
B170324
Service Campaign
Under certain driving situations, coolant leaks onto the fuel injectors on cylinder bank (5-8).
B630418
Service Bulletin/Repair Instructions
One or more of the LED daytime running lights are dim or discolored.
B510819
Service Bulletin/Repair Instructions
The basic conditions for initializing the power windows are not met.
B611305
Service Bulletin/Repair Instructions
The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle âÂÂdischarged batteryâ complaints.
B360121
Service Bulletin/Repair Instructions
At low outside temperatures (below 40 degrees F) and slow driving speeds (i.e. when parking, maneuvering)with a large steering angle, the front end can be slightly axially misaligned. This can be felt (jerking)/ heard via an acoustic acknowledgement (clunk) as seen at the 11 second mark of the video. See attached video V36 01 21.
B160123
Service Bulletin/Repair Instructions
A vehicle arrives at your center to be diagnosed for a micro-leak in the fuel evaporative (EVAP) system(NVLD natural vacuum leak detection). For this condition, the following fault is stored in the DME: 190302 - fuel tank ventilation and scavenging air system, micro-leak: leakage more than 0.5mm For: Model vehicles other that the ones listed above, or for EVAP faults related to a âÃÂÃÂlarge leak,âÃÂàafter confirming that the fuel filler cap is fitted properly, then, proceed to follow the corresponding test plan
B610524
Service Bulletin/Repair Instructions
The Central Information Display goes black intermittently due to resets of the Head Unit (HU-H3). FaultB7F8F9 ÃÂâÃÂÃÂÃÂàÃÂâÃÂÃÂÃÂÃÂHU-H: ResetÃÂâÃÂÃÂÃÂàwill be stored in the HU-H3.
B320223
Service Bulletin/Repair Instructions
SITUATION Unusual noises occur only when operating the steering column in the axial direction. 1. A one-time thump sound at the start of movement Shortly after the steering column starts moving, retracting, or extending, a one-time thump noise is heard. See attached video V32 03 23 2. Humming noise while steering column extends in the axial direction. The sound is only heard when the steering column is extended, not when the steering column is retracted. When the steering column starts to move in the extended direction, the humming noise can be heard. See attached video V32 04 23
B340714
Service Bulletin/Repair Instructions
Functional noises (squealing/honking) when braking shortly before the vehicle comes to a stop. CAUSE Material-
B520121
Service Bulletin/Repair Instructions
?The front seat will not calibrate/initialize, and the stored faults cannot be deleted.
B540521
Service Bulletin/Repair Instructions
?The sunroof will not operate in either direction.
B090221
Service Bulletin/Repair Instructions
With the introduction of the BMW Remote Software Upgrade, all Service Pack 18 vehicles and partial Service Pack 15 vehicles may receive new functionality or modifications in their features.
B320420
Service Bulletin/Repair Instructions
A groaning type noise is heard during the height adjustment.
B630821
Service Bulletin/Repair Instructions
Headlight check control (CC) message 128 "High beam headlight failure" is displayed. The following fault codes are stored during a vehicle test: 80419A - Left high-beam headlight: Short circuit and/or 8041A5 - light outputs: Number of permitted short circuit cycles exceeded
B640821
Service Bulletin/Repair Instructions
The air conditioning cycles from cold to warm air while driving or while at a stand still. The vent outlet temperatures vary by 25 degrees Fahrenheit or more (38 F to 60 F +) without changing any climate control settings.
B514616
Service Bulletin/Repair Instructions
Upon opening and closing the tailgate, a creaking/groaning sound can be heard from tailgate actuator.
B651523
Service Bulletin/Repair Instructions
After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
B620223
Service Bulletin/Repair Instructions
In SPORT mode, a black square appears in the RPM gauge (tachometer) section of the instrument cluster display.
B651623
Service Bulletin/Repair Instructions
Customer states there is no audio playback (telephony, navigation, radio) and system sounds (PDC, turn indicators, acoustic signals) may also have failed.
B840822
Service Bulletin/Repair Instructions
The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via the Voice over LTE (VoLTE) function. For this purpose, the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance, and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
B841422
Service Bulletin/Repair Instructions
Customer is shown an incorrect GPS location in the vehicle (i.e., Nav Map, coordinates).
B612922
Service Bulletin/Repair Instructions
The saved steering column positions, vertical and horizontal, are not stored long term.
B613322
Service Bulletin/Repair Instructions
Due to a software error, Remote Software Upgrade (RSU) and Remote Support are currently not possible. Additionally, the Integrated Owner's Handbook cannot be displayed.
B611222
Service Bulletin/Repair Instructions
After opening the vehicle with the radio remote control and changing the profile, the exterior mirror settings are lost.
B651922
Service Bulletin/Repair Instructions
The customer complains that the radio stations change by themselves.
B170222
Service Bulletin/Repair Instructions
Coolant is leaking from under the car which is equipped with the S63 engine. A low coolant warning might also be displayed (CC Message ID166).
B662419
Service Bulletin/Repair Instructions
Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column.
SIB650922
Service Bulletin/Repair Instructions
The sound output intermittently drops out entirely. This can be reproduced with all audio sources as well as telephone and voice output.
SIB090121
Service Bulletin/Repair Instructions
BMW offers a new special ISTA Installation made available for Roadside Assistance / Mobile Service technicians. The new ISTA Version is also able to be used in case of a Remote Software Upgrade (RSU) programming failure to get the customer car reprogrammed on site. In case of a Remote Software Upgrade failure, the engine start is prevented for safety reasons until the vehicle is programmed correctly. Most of the errors occur when only one control unit fails to program correctly.
SIB610722
Service Bulletin/Repair Instructions
Check Control Message (CCM) displays "Vehicle key missing" after engine start.
SIB610822
Service Bulletin/Repair Instructions
When using the Key Reader to retrieve information from the customer's key, no current vehicle data is available.
SIB640222
Service Bulletin/Repair Instructions
Mist formation on the windshield inside surface may occur at departure or after MSA (automaticstart/stop). Acoustic abnormality in the area of the recirculated air flap (recirculation flap closing and opening severaltimes). The above may occur individually or in combination.
SIB651312
Service Bulletin/Repair Instructions
The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (as of 7/2012 production). This uses map North America NEXT. The Headunit High 2 (HU-H2), also called NBT-EVO, superseded the NBT HU and was introduced in 3/2014. This uses map North America EVO. The Headunit High 4 (HU-H4, also called MGU21) superseded the MGU starting with certain MY2021 vehicles with option code 6U3 Live Cockpit Professional. This uses map North America JOY. The ENTRY Media/Navigation (HU-B) is the low line business version of the navigation system and was introduced in 3/2014. This uses map North America ROUTE. The ENTRY NAV EVO (HU-B2) replaced Entry Media/Navigation as the low-line business version and was introduced in certain MY2018 vehicles. This uses map North America WAY.
B110621
Service Bulletin/Repair Instructions
Information updated about engine oil filter cap drain plug. When performing an engine oil service on vehicles equipped with a N63M, N63B or S63M engines; the ETK states to use "Set oil filter element" P/N 11 42 5 A33 C42 or P/N 11 42 5 A33 C43. The part numbers are not available at the moment.
B610722
Service Bulletin/Repair Instructions
Check Control message (CCM) displays "Vehicle key missing" after engine start.
B661519
Service Bulletin/Repair Instructions
The steering intervention for Lane Departure Warning (LDW) is too strong (severe), which can create an uncomfortable feeling for the driver. Background: Steering intervention helps keep the vehicle in the lane if the system detects that a lane marking has been crossed. The steering intervention can be noticed on the steering wheel and can be manually overridden at any time.
B090321
Service Bulletin/Repair Instructions
In some rare cases a customer vehicle might be excluded from one or more Remote Software Upgrade(RSU) campaigns. This SIB gives an overview how to identify these vehicles and how to proceed in case of a customer complaint.
B170121
Service Bulletin/Repair Instructions
The quick disconnect coupling on the cylinder head coolant vent line could break at the cylinder head. This would lead to loss of coolant from the engine.
B652121
Service Bulletin/Repair Instructions
SiriusXM satellite radio is not working and does not display a channel list.
B840621
Service Bulletin/Repair Instructions
The SIM card installed in the telematics control unit (ATM2) connects to different mobile providers' networks. However, due to a missing parameter, this does not work and can cause disruption in BMW ConnectedDrive services in areas with insufficient network coverage.
B840917
Service Bulletin/Repair Instructions
While using the wireless charger, one or both of the following may occur: 1) The BMW display key or mobile phone becomes hot to the touch. 2) The device switches off due to over temperature (built-in device protection).
B001020
Service Bulletin/Repair Instructions
BMW of North America (BMW NA) has made information available online to customers about software versions, including any changes to vehicle functionality that will result from each update.
B090121
Service Bulletin/Repair Instructions
BMW offers a new special ISTA Installation made available for Roadside Assistance / Mobile Service technicians.
B511921
Service Bulletin/Repair Instructions
A faulty componnent inside the trunk spindle drive.
B611621
Service Bulletin/Repair Instructions
The "energy management" Check control message (ID code 415) is falsely displayed when entering the vehicle.
B650919
Service Bulletin/Repair Instructions
Customer states the following about their vehicle: active radio or music source is interrupted, the navigation is no longer available, a black screen is shown in the Control Display, the system works again after a short interruption.
B341019
Service Bulletin/Repair Instructions
Inform the customer during a consultation that the M Compound (standard equipment) and M Carbon Ceramic (optional) brakes are high-performance brake systems which are designed for sporty, dynamic driving styles. As a side effect of the highest possible brake performance, customers are likely to hear noises due to the extremely resilient materials. In the same conversation, inform the customer that his/her braking performance can help ensure that the noises do not occur or disappear quickly.
B610721
Service Bulletin/Repair Instructions
Groaning, scraping, or squeaking noise coming from the steering wheel area in the interior of the vehicle,when turning the steering wheel.
B651312
Service Bulletin/Repair Instructions
The Headunit High (HU-H), also called NBT, began replacing the Car Information Computer (CIC) on certain MY2013 vehicles with option 609 (as of 7/2012 production). This uses map North America NEXT. The Headunit High 2 (HU-H2), also called NBT-EVO, superseded the NBT HU and was introduced in 3/2014. This uses map North America EVO. The Headunit High 3 (HU-H3, also called MGU) superseded the NBT-EVO starting with certain MY2019 vehicles with option code 6U3 Live Cockpit Professional or 6U2 Live Cockpit Plus. This uses map North America LIVE. The ENTRY Media/Navigation (HU-B) is the low line business version of the navigation system and was introduced in 3/2014. This uses map North America ROUTE. The ENTRY NAV EVO (HU-B2) replaced Entry Media/Navigation as the low-line business version and was introduced in certain MY2018 vehicles. This uses map North America WAY.
B651721
Service Bulletin/Repair Instructions
The BMW key card cannot be activated. The activation menu in the BMW iDrive is missing.
B662919
Service Bulletin/Repair Instructions
The top view image of the vehicle is misaligned when observed in the Control Information Display (CID). When the vehicle is parked in a parking spot with line markings, it is clearly noticed in the CID that the lines are not parallel to the side of the vehicle. This may be noticed on either the driver side, passenger side or both.
SIB 61 04 21
Service Bulletin/Repair Instructions
The customer may complain of a check control message stating "Safe share detected" (CCM-ID 953). Check control message can be verified by checking key reader information or performing the Check control message history service function.
SIB 62 03 21
Service Bulletin/Repair Instructions
When the vehicle is operated in Sport Mode, the engine speed is no longer displayed in the BMW Head-Up Display (HUD).
B610421
Service Bulletin/Repair Instructions
The customer may complain of a check control message stating "Safe share detected" (CCM-ID 953). Check control message can be verified by checking key reader information or performing the Check control message history service function.
B651121
Service Bulletin/Repair Instructions
SiriusXM satellite radio is not working and does not display a channel list.
B650721
Service Bulletin/Repair Instructions
HU-H3 MGU RESETS DUE TO BLUETOOTH CONNECTION WITH SAMSUNG ANDROID 11 : The head unit resets when using various apps (e.g., YouTube, Spotify, etc) on the connected mobile phone. This affects Samsung mobile phones (e.g., Galaxy S20 / S21) with the Android 11 operating system.
B660321
Service Bulletin/Repair Instructions
DELIVERY STOP: RADIO REMOTE CONTROL M SPORT: Vehicles were delivered with the wrong radioremote control (without motion sensor) whichdecreases the theft-proofing against rangeextenders.
B720321
Service Bulletin/Repair Instructions
M5 CS PRECRASH SAFETY BELT TENSIONING TRIGGERS PREMATURELY IN CERTAIN SITUATIONS: In certain situations, when the vehicle is being driven more dynamically and repeated heavy braking may berequired, the Precrash Safety Belt tightening application may activate even though there is no presence of a hazardous situation.
B840120
Service Bulletin/Repair Instructions
BMW CONNECTEDDRIVE SERVICES ARE NOT AVAILABLE: The BMW ConnectedDrive services are not available for an extended period.
B840220
Service Bulletin/Repair Instructions
REMOTE 3D VIEW NOT AVAILABLE: Remote 3D View cannot be launched In the BMW ConnectedDrive App.
B340414
Service Bulletin/Repair Instructions
Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
B510221
Service Bulletin/Repair Instructions
AIR DUCT COVER LOOSE OR MISSING: The air duct cover (fender mounted) may be loose or missing. Prolonged high-speed driving can cause movements of the fender, causing the air duct to become loose.
B630421
Service Bulletin/Repair Instructions
AUTOMATIC HIGH BEAM DOES NOT DIM AUTOMATICALLY: The automatic high beams may not automatically dim to low beams.
B511218
Service Bulletin/Repair Instructions
TRIM STRIP IS LOOSE OR DETACHED FROM ROOF: The roof trim strip may be loose or detached. The roof trim strip adhesive was not sufficient.
B630121
Service Bulletin/Repair Instructions
BRAKE LIGHT REMAINS LIT AFTER BRAKE PEDAL RELEASE: The trunk-mounted brake light remains lit for several seconds after the brake pedal is released.
B650121
Service Bulletin/Repair Instructions
SPORADIC FAILURE OR CRACKING NOISE IN BASS SPEAKERS: No Bass or a cracking noise can be heard from the bass speakers.
B340121
Service Bulletin/Repair Instructions
DYNAMIC STABILITY CONTROL (DSC) UNIT DOES NOT RESPOND AFTER PROGRAMMING: After programming the vehicle using ISTA, the DSC control unit does not respond. Or: In the case of a BMW Remote Software Upgrade, the customer gets a Check Control message: "BMW Remote Software Upgrade failed. Vehicle is not operational. Please call BMW Roadside Assistance."
B011220
Service Bulletin/Repair Instructions
BMW MAINTENANCE BOOKLET AND OEM TIRE MANUFACTURERS' WARRANTIES: In efforts to provide a digital experience to our customers, BMW of North America, LLC (BMW NA) is proud to announce a digital version of both the BMW Maintenance Booklet and BMW Original Equipment Manufacturers' (OEM) Tire Warranties.
B160420
Service Bulletin/Repair Instructions
?TANK VENTILATION DIAGNOSIS: There is software error in the diagnosis of the fuel tank ventilation valve. This error may result in the Service Engine Soon (MIL) light not being activated if a fault is found in the tank vent system after a second fault detection. This error will also disable diagnosis of the catalytic converter and oxygen sensor (if a fault is detected in the tank vent system).
B612620
Service Bulletin/Repair Instructions
?BMW DIGITAL KEY CARD IS NOT DETECTED WHEN PLACED ON THE NFC TRAY: The customer may have the following complaints: The Digital Key Card cannot be activated on the NFC (near field communication) charging tray (the activation pop-up does not appear although the Digital Key menu is present), Or the Digital Key Card is not detected when placed on the NFC tray.
B620320
Service Bulletin/Repair Instructions
MALFUNCTION INDICATOR LAMP (MIL) IS ILLUMINATED WITH FAULT MEMORY CDC152: The malfunction indicator lamp (MIL) is illuminated in the instrument cluster. The vehicles has no operating failures; only the MIL is illuminated.
B652020
Service Bulletin/Repair Instructions
?PROGRAM HEAD UNIT: Satellite radio content is not available over IP, this does not affect channels received over satellite.
B652120
Service Bulletin/Repair Instructions
?NO PREVIEW IMAGES DISPLAYED IN THE REAR SEAT ENTERTAINMENT: The rear seat entertainment screens do not display any preview images at times.
B661820
Service Bulletin/Repair Instructions
?GESTURE CONTROL UNINTENDED OPERATION: The Gesture camera inadvertently detects movement and performs unintended operations.
B612315
Service Bulletin/Repair Instructions
Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full: Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full.There are no faults stored in the system for the washer fluid level switch.
B661520
Service Bulletin/Repair Instructions
ACTIVE CRUISE CONTROL - UNEXPECTED DECELERATION: Vehicle slows down (decelerates) unexpectedly while Active Cruise Control with Stop & Go (ACC) function is activated.
B661720
Service Bulletin/Repair Instructions
SURROUND VIEW - PARKING VIEW IMAGES DISPLAYED INCORRECTLY: After programming and shifting into reverse, there may be various sporadic concerns regarding the rearview camera and the surround view (top view) camera images in the CID (Central Information Display).
B651420
Service Bulletin/Repair Instructions
DWA ANTI-THEFT ALARM ACTIVATES FOR NO APPARENT REASON: The alarm system is activated due to no apparent external or internal influence. Sensitivity of internally installed tilt alarm sensor in the alarm system (DWA).
B320320
Service Bulletin/Repair Instructions
FAILURE OF THE ELECTRIC STEERING COLUMN ADJUSTMENT AT HIGHER CABIN TEMPERATURE: Electric steering column adjustment fails when interior cabin temperatures rise above 122 degrees F (e.g., parked outdoors on hot day). Faulty self-diagnosis of the steering column control unit.
B511818
Service Bulletin/Repair Instructions
DOORS WILL NOT COMPLETELY LATCH: One or more doors will not completely latch or will open to the first stage at times. The door lock strikers may be misadjusted.
B651520
Service Bulletin/Repair Instructions
HEAD UNIT RESETS WHEN NAVIGATION IS USED IN CERTAIN LOCATIONS: The head unit resets sporadically causing the CID to turn black and then starts up again after a short time with the message "Start navigation system". This only occurs during navigation guidance when the "3D building" function is used Software in the Head Unit High (HU-H3).
B661919
Service Bulletin/Repair Instructions
COMFORT ACCESS AND COMFORT GO NOT POSSIBLE: Vehicle cannot be unlocked/locked or started via Comfort Access. Remote control functionality is restored by pressing any of the key buttons or by removing and reinstalling the remote control key battery.
B610419
Service Bulletin/Repair Instructions
VEHICLE DOES NOT START BATTERY TOTALLY DISCHARGED: The customer's vehicle does not start due to a totally discharged battery.
B620119
Service Bulletin/Repair Instructions
INSTRUMENT CLUSTER AND ONBOARD COMPUTER INTERMITTENTLY INOPERATIVE: The audio source, radio station, or music track cannot be changed using the MFL. Normal functionality may possibly return after a sleep cycle or a battery reset. This affects vehicles with: Integration level S18A-18-11-5xx Live Cockpit Professional (option code 6U3) including the instrument cluster High 4.1. While the Kombi is not working properly the rest of the system is working properly. The customer can still use the Central Information Display (CID) for items such as entertainment settings, Driver Experience settings, etc, utilizing the I drive controller. The telephone functions are not affected. Unfavorable software at system start-up.
B650709
Service Bulletin/Repair Instructions
NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier.
B651220
Service Bulletin/Repair Instructions
BMW CONNECTEDDRIVE APPS ARE NO LONGER AVAILABLE AFTER PROGRAMMING: After programming vehicle with "20-03" software, BMW ConnecedDrive apps are no longer available in the head unit. Software in the Head Unit High (HU-H3).
B270220
Service Bulletin/Repair Instructions
JERKING OR SHUDDERING FROM THE DRIVELINE (XDRIVE TRANSFER CASE ATX13-X): There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads There are no warning lights or Check Control messages. CAUSE Unevenly worn or incorrect fitment tires are installed on the vehicle or the factory-filled transfer case oil does not meet BMW specifications.
B610520
Service Bulletin/Repair Instructions
CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER: A yellow CCM (Check Control Message) ID 415 is displayed- "Increased battery drain! // Battery. Electrostatic discharge at standstill / start engine. Energy management" The results of the Energy Diagnosis test plan identifies the Controller as the root cause of the CCM. The Controller delays the vehicle going to sleep by up to 6 minutes. In some cases this will cause the CCM 415 to be displayed when starting the vehicle. Replacing the Controller in this case will not correct this situation.
B611220
Service Bulletin/Repair Instructions
TRUNK LOCK SWITCH INSIDE THE GLOVE COMPARTMENT IS MISSING: The trunk lock switch ("hotel"/valet switch) is missing in the glove compartment. This switch decouples the trunklid from the central locking system so that the trunklid cannot be opened. Incorrectly built production vehicles.
B660920
Service Bulletin/Repair Instructions
SURROUND VIEW WRONG VEHICLE DISPLAYED AFTER PROGRAMMING: After programming the wrong vehicle model is displayed in the Central Information Display (CID) when the Surround View is activated.
B513016
Service Bulletin/Repair Instructions
TAILGATE UNINTENTIONALLY OPENS: This Service Information Bulletin (Revision 4) replaces SI B51 30 16 dated March 2018. Trunk/tailgate may open when vehicle is locked Trunk/tailgate may open while the vehicle is in motion usually after stopping such as a traffic light etc. Vehicle key trunk/tailgate button may be accidentally pressed thus opening the tailgate.
B650820
Service Bulletin/Repair Instructions
DISPLAYS SPORADICALLY REACT VERY SLOWLY WHEN SCROLLING IN THE AUDIO MENU: Sporadically the reaction time of the display in the instrument cluster the head-up display or in the CID (Central Information Display) is very long. This can occur when browsing/scrolling through lists in the audio menu switching radio stations or albums. Software in the Head Unit High (HU-H3).
B652214
Service Bulletin/Repair Instructions
AUTOMATED ACTIVATION OF NAVIGATION SYSTEM DURING PDI/QC1: This Service Information Bulletin (Revision 2) replaces SI B65 22 14 dated October 2015. The INITIAL NAV enabling code no longer needs to be pre-ordered through the Parts department! When the vehicle is connected to the diagnostic system ISTA to perform PDI/QC1 the step to activate the navigation system (part of Delete Transport Mode) will automatically request the INITIAL NAV enabling code (VIN-specific) without pre-ordering the enabling code. This enabling code will be automatically delivered through ISTA and it then activates the navigation system.
B660817
Service Bulletin/Repair Instructions
REAR VIEW CAMERA FAILS TO DISPLAY IMAGE: This Service Information Bulletin (Revision 6) replaces SI B66 08 17 dated January 2020. Sporadically when the rear view camera is activated no image appears in the display. The rear view camera can be activated by either: 1. Selecting reverse with the shift selector 2. Camera activation via the button on the center console Camera function returns after a terminal change.
B661418
Service Bulletin/Repair Instructions
CHECK CONTROL MESSAGE CROSSING TRAFFIC WARNING WHILEPARKING: The check control message (CCM) "Crossing traffic warning. It is possible to continue driving" can appear when parking. This can occur when the vehicle is parked too close to adjacent solid walls such as a single car garage or an underground parking space. The wall can be on either side of the vehicle regardless if the vehicle is pulled in forwards or backed in. If the customer switches the vehicle off and starts it again immediately the same CCM may occur again.
B840214
Service Bulletin/Repair Instructions
CONNECTEDDRIVE/BMW ASSIST SYSTEM DIAGNOSIS INFORMATION: This Service Information Bulletin (Revision 7) replaces SI B84 02 14 dated May 2019. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information Bulletin: Is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. Will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.
B120220
Service Bulletin/Repair Instructions
THE MIL IS ILLUMINATED WITH OXYGEN SENSOR FAULTS STORED: One of the following faults may be stored in the digital motor electronics (DME) either as part of diagnosing a different issue; and/or an illuminated malfunction indicator lamp (MIL). Fault code Control module Fault code text 13900 DME Oxygen sensor after catalytic converter from rich to lean: Delayed response Or: 12B011 DME Oxygen sensor 2 after of catalytic converter from rich to lean: Delayed response This situation is not associated with any drivability complaints. An unfavorable DME diagnostic calibration may cause a fault code to be erroneously stored. These faults will cause the MIL to illuminate.
B120419
Service Bulletin/Repair Instructions
DME FAULT MEMORY ENTRY FOR THE CRANKSHAFT SENSOR: This Service Information Bulletin (Revision 1) replaces SI B12 04 19 dated February 2019. Technicians may notice this fault logged during a diagnostic session: Fault code: Control module: Fault Text: 160021 DME Crankshaft sensor: general loss of synchronism Environmental conditions are vehicle speed 0 (stationary) and engine speed less than 1500 rpm. There is no customer-facing symptom nor related check control message displayed. Phantom/pseudo fault due to unsuitable DME software. Background: After parking the vehicle and turning off the engine both DME control units go into sleep mode at different times. The DME of cylinder bank 2 ("secondary") goes into sleep mode first The DME of cylinder bank 1 ("primary") is still awake and can experience a reduction in signal voltage for the crankshaft sensor signal This signal change can mistakenly be evaluated as a skipped crankshaft sensor cog by the DME. If the engine is started while the primary DME is still awake this causes a brief loss of synchronization with the secondary DME. Fault 160021 is logged after three (3) consecutive engine starts with this momentary loss of synchronization. Note: Starting the engine after the primary DME has also gone into sleep mode will avoid the loss of synchronization.
B330319
Service Bulletin/Repair Instructions
SERVICE ACTION: CHECKING THE THRUST WASHER AND THE REAR AXLE ANTI-ROLL BAR. On vehicles with an incorrect setting of the thrust washer contact between the thrust washer and the sway bar may occur over time. This can lead to corrosion and breakage of the anti-roll bar. Installation error of the right side rear axle thrust washer during manufacturing.
B511319
Service Bulletin/Repair Instructions
DOOR LATCHING COMPLAINTS IN COLD WEATHER: Below freezing ambient temperatures: One or more doors (front or rear) may not open when attempting to enter or After opening they may not correctly latch A leaking seal on the outer Bowden release cable may allow water to enter the cable sheathing and freeze.
B620919
Service Bulletin/Repair Instructions
INSTRUMENT CLUSTER REMAINS DARK AFTER STARTING THE VEHICLE: Instrument cluster remains dark after starting the vehicle. After a restart normal functionality is restored. Software error in the KOMBI (Instrument Cluster).
B621019
Service Bulletin/Repair Instructions
INCORRECT CONDITION BASED SERVICE DATA FOR BRAKE FLUID SERVICE. "Brake fluid service due since 12/2001" is displayed in the instrument cluster although the vehicle is only a maximum of 1 year old. Software error in the KOMBI (Instrument Cluster).
B651019
Service Bulletin/Repair Instructions
ENGINE SPEED DEPENDENT NOISE DURING AUDIO PLAYBACK: Integration level updated. There is an engine speed-dependent noise heard through the speakers during audio playback. Software error in the Receiver Audio Module (RAM) control unit.
B651419
Service Bulletin/Repair Instructions
HEAD UNIT NBT EVO (HU-H2) PROGRAMMING ABORT: The CID screen may light up blue. When this occurs A battery reset is not successful in restoring head unit operation Software error in the Bootloader file (BTLD) of the head unit.
B662319
Service Bulletin/Repair Instructions
DRIVERS ASSISTANCE SYSTEM: CHECK CONTROL MESSAGE IS DISPLAYED. The Driver Assistance System limited warning message is displayed.
B512419
Service Bulletin/Repair Instructions
CRACKING NOISE FROM DASHBOARD TRIM. A cracking noise is present from the area of the dashboard trim when heating or cooling the vehicle. Thermal expansion of the plastic components of the decorative trim causes cracking noises.
B651519
Service Bulletin/Repair Instructions
SECURITY IMPROVEMENTS FOR CONNECTEDDRIVE. Security patches for non-safety critical vulnerabilities in BMW head units Entry Nav Entry Media NBT and NBT EVO.
B130519
Service Bulletin/Repair Instructions
DELIVERY STOP: CAMSHAFT SENSORS. On affected vehicles the camshaft sensors will be inspected and if necessary replaced.
B410319
Service Bulletin/Repair Instructions
Streaks/blisters in the carbon fiber roof after removal of the Bodyguard film: Streaks or blisters are present (circled) in the carbon fiber roof.
B122119
Service Bulletin/Repair Instructions
HIGH ENGINE SPEED IMMEDIATELY AFTER STARTING. In rare circumstances after the engine is started with the Start-Stop button the engine speed may immediately increase to a high constant RPM (approximately 3000 rpm).
B360319
Service Bulletin/Repair Instructions
INCORRECT DISPLAY OF TIRE SETPOINT INFLATION PRESSURES IN THE CONTROL DISPLAY. Increased tire set point inflation pressures are displayed when checking the tire pressure setting in the Control Display (CD).
B170119
Service Bulletin/Repair Instructions
SERVICE ACTION: CHECK COOLANT LEVEL. The filling procedure at the factory could have set the engine coolant level in the expansion tank to below the minimum level.
B511419
Service Bulletin/Repair Instructions
KIDNEY GRILL(S) LOOSE. One or both kidney grills may be loose.
B620518
Service Bulletin/Repair Instructions
HEADS UP DISPLAY SPORADICALLY INOPERATIVE. Fault memory entry "B7F6E4 HUD: Fault in display backlighting "is stored in the instrument cluster. Intermittently the Head-Up Display (HUD) may deactivate.
B661119
Service Bulletin/Repair Instructions
NIGHT VISION 3: INTERNAL SOFTWARE ERROR FAULT. During vehicle diagnosis of an unrelated issue the following erroneous fault may be stored in the Night Vision 3 control unit.
B641418
Service Bulletin/Repair Instructions
NO COOLING INTERMITTENTLY FROM VENTS. After a long journey (more than 30 minutes).
B111518
Service Bulletin/Repair Instructions
DELIVERY STOP: S63M ENGINE REPLACE THE ENGINE. Due to a crankcase manufacturing issue.
B520518
Service Bulletin/Repair Instructions
SEAT MEMORY SWITCH SPORADICALLY NOT FUNCTIONING. Selecting one of the saved seat positions (via the memory seat position switch on the door panel), fails to work. A saved seat position cannot be retrieved. The memory function works again after a terminal change or backrest width adjustment. Note: Manual seat adjustment using the button for forward/back seat adjustment still works. Software error in the seat module.
B340618
Service Bulletin/Repair Instructions
?ASSISTANCE SYSTEM FAILURE FAULT CODES 03058E/030557 IN DSC CONTROL UNIT. Check Control Message (CCM): "Assistance system failure" is displayed. One or both of the following fault codes may appear in the Dynamic Stability Control (DSM) control unit: * 03058E - Engine control unit operating fluid - acceleration sensors adaptive data sensor tolerance at maximum value * 030557 - Engine control unit operating fluid - steering angle driver adaptive data for steering angle tolerance at maximum value Software error in the DSC control unit.
B662017
Service Bulletin/Repair Instructions
?DISPLAY KEY IS NON-FUNCTIONAL. Display key is non-functional. Display key cannot be charged or switched on. Possibly defective display key.
B840616
Service Bulletin/Repair Instructions
?BMW ONLINE NON-FUNCTIONAL: CHECK ICC-ID IN ACCOUNT. BMW Online/BMW ConnectedDrive not functional. Vehicle and service cockpit have different ICC-ID's (Integrated Circuit Card Identifier).
B180318
Service Bulletin/Repair Instructions
SERVICE ACTION: CHECK THE EXHAUST CLAMPS AT THE CATALYTIC CONVERTERS (F90): The screw clamps that secure the upper and lower catalytic converters (1) may loosen over time.
B620418
Service Bulletin/Repair Instructions
BRIEF FLICKERING OF THE INSTRUMENT CLUSTER AFTER ENGINE STARTUP: When starting the vehicle, a brief flickering of the instrument cluster (KOMBI) can be seen