Vehicle report

2026 BMW R 1300 RT

Service bulletins

8 bulletins

Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.

MC770126

Service Bulletin/Repair Instructions

The mechanism of the release lever is jammed. When trying to open the case, the release lever does not open after the lock barrel has been pressed.

MCAS4126

Other

Pin Return

MCAS1926

Other

Carrier Plate Return

MC110125

Service Campaign

After a quality inspection it was found that due to improper machining, the right-side chain tensioner screw plug doesn’t meet the specifications over the service life of the motorcycle. As a result, over increased mileage accrued noise and engine damage may occur.

MC000325

Service Bulletin/Repair Instructions

During the pre-delivery check (PDI) or when completing the PDI for the vehicle, the wiring harness is installed and secured in the steering head area. Due to an excess length in the harness to the Keyless ride control module, an unintended loop in the cable may form, which can chafe on other components. The maintenance instructions currently published in Aftersales Information Research (AIR) do not explicitly describe the installation.

MC611025

Service Campaign

Center stands assist does not function on vehicles with center stand and standard chassis (meaning withoutoption 22B – Dynamic chassis Adaption), due to a faulty coding. Note: the center stand can still be operated manually. The affected motorcycles have been placed under the delivery stop STOP610029 associated with campaign number 0061710000, which will be lifted upon completion of this technical campaign. For vehicles that have not yet been delivered, the service action must be completed before vehiclehandover. If the service action cannot be completed due to a parts, software, or special tool shortage, theservice action then must be performed during the next possible workshop visit when parts, software, orspecial tools become available. In such instances where work cannot be performed, it is essential to informthe customer of the situation. In all instances in which the vehicles have already been handed over to customers, the Technical Campaign must be carried out at the next workshop visit.

MC460225

Service Campaign

R 1300 RT’s built from the factory with option “068B Variable Luggage System” may have retaining straps that have not been crimped properly.

MC330524

Service Bulletin/Repair Instructions

In some R 1300 model motorcycles, it has been detected that the rear wheel swingarm has play in theaxial direction. The mounting of the swingarm to the frame is comparable to the F and S model motorcycles. During the mounting of the swingarm axle, this creates different tensions from motorcycle to motorcycle pulling the frame together. Resulting in little to no axial play allowing axial movement on the swingarm axle.

Reading this report

Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.