Vehicle report

2023 BMW S 1000 R

Compare every BMW S 1000 R yearNHTSA and EPA records

Service bulletins

9 bulletins

Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.

MCAS5425

Other

Exhaust Camshaft Adjuster Switch Cam

MC650324

Service Bulletin/Repair Instructions

Due to a software error, the smart phone with connected app is paired to the motorcycle, but the app does not connect to the motorcycle.

MC360124

Service Bulletin/Repair Instructions

Carbon rim is leaking in the valve stem area. Due to breaking of the rim during mold separation andcracks in the clear coat. BMW Motorrad has extensively tested this complaint and have found that heavy, improper use cancreate leaks and cracks in general. For example, pressing/hitting the valve with the blade of the tirechanger machine. Microscope images of the test rims show identical failure as the rims that were returned requestedfor analysis. The resuLTs are that these rims were damaged by misuse not a defect in material and workmanship.

MC110124

Service Bulletin/Repair Instructions

Coolant residue found on the oil sump. And/or Coolant level in the expansion tank is too low. It has been found that the oil/coolant pumps are often replaced without there being an actual leak. Due to the design these pumps can drip in small quantities.

B611305

Service Bulletin/Repair Instructions

The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle “discharged battery” complaints.

MC310123

Service Bulletin/Repair Instructions

On the above listed vehicles, lubricant residue can be found on the fork cap on the right side telescoping fork. Vehicles with caps 31 42 1 754 557 and 31 42 1 757 701 can show this residue. These are not leaks at the cap, but assembly grease residue. Forks with this apparent leak have been received and leak testing was performed. NO leaks could be detected.

MCAS4023

Service Bulletin/Repair Instructions

BMW AG has requested the inspection of all dealer stock of the following part number(s) listed below to ensure the spacer is conformed to drawing.

MC340223

Service Bulletin/Repair Instructions

Front and rear wheel speed sensor faults (0x3A1800 and 0x3A1801) appear after the bike is being revvedover 5000 RPM while still on the side stand, sometimes in conjunction with the side stand fault 0X3A1331. When the engine is revved up while on the side stand, vibrations are sent through the entire motorcycle.This vibration intensity varies from bike to bike. This vibration can cause particular movement between the wheel speed sensor and the sensor ringsdepending on the position of the sensor to the ring. The movement is picked up as rotation speed and iscalled “ghost speed”. This “ghost speed” follows the increase in RPM’s. 5000 RPM = approx. 12 MPH 10000 RPM = approx. 31 MPH

SIB-111421

Service Bulletin/Repair Instructions

CHECK ROCKER ARMS AND REPLACE WHERE NEEDED.

Reading this report

Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.