MCAS1726
Other
Return Combination Switch
Vehicle report
2025 BMW S 1000 RR
Service bulletins
6 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
MCSTOP610032
Service Campaign
After a quality inspection it was found that due to improper machining, the right-side chain tensioner screw plug doesn’t meet the specifications over the service life of the motorcycle. As a result, over increased mileage accrued noise and engine damage may occur.
MC360125
Service Bulletin/Repair Instructions
When turning the wheel slowly, you might hear rattling noises from inside. Sometimes during manufacturing ,the core doesn't fully detach from the wheel. These core pieces can break off and rattle inside the wheel.
MC330225
Service Bulletin/Repair Instructions
Customer complains when the bike parked and without the engine running; while compressing and lettingthe rear suspension rebound, there is a loud audible cracking or groaning noise. This is either due to low grease levels on the bearing positions or bearing position damage.
MC330325
Service Bulletin/Repair Instructions
Traces of wear seem to be found on the needle bearing bush of the rear suspension strut. The ZnNi (zinc-nickel) corrosion protection coating can be worn in the area of the race for the needles of thebearing and does not constitute bearing bush wear.
MC110322
Service Campaign
During the production of the intake camshaft there was a change in the coolant used to prevent localized overheating of parts of the camshaft. Because of this, certain parts of the camshaft may have a changed surface hardness that can result in increased wear of the rocker arms and camshaft over time.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.