B064326
Other
Fastening Elements Return
Vehicle report
2025 BMW X7
Service bulletins
51 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
B110326
Service Bulletin/Repair Instructions
This Service Bulletin provides instructions to clean the intake valves using the BMW Carbon Blaster Tool P/N 81 29 2 208 034 and the S68T / XB1T Kit P/N 83 30 5 BAD 3D5. Refer to SI B04 12 11 for existing documentation about the carbon blaster tool and SI B04 02 26 for the S68T /XB1T tool kit.
B063826
Other
Shaft Return
B120326
Emissions
Due to an implementation error in various OBD diagnostics in the vehicle's control units, in very rare cases itmay happen that stored fault memory codes (DTCs) and the MIL (warning light) are not automaticallydeleted even though the underlying malfunction has already been rectified. This does not comply with the statutory OBD specifications.
B610126
Service Bulletin/Repair Instructions
During vehicle start-up the Secure Element (SE) of the BCP may fail causing communication errors. TheCheck Control message “Drive carefully. Driving stabilisation.” will appear. In addition, the fault memoryentries below will be stored within 40 seconds of each other. ACSM: 02010A - Coding: Coding data not qualified VIP: 02390A - VIP control unit: Coding data not released, signature IB: 02290A - DSC control unit: Coding data not released, signature HKFM: 020D0A - HKFM: Coding data are not qualified
B651426
Service Bulletin/Repair Instructions
The vehicle may experience various operational issues with Apple CarPlay Projected Modes such as: Dropped connections No automatic reconnection Display errors
B652025
Service Bulletin/Repair Instructions
After replacing the Multifunctional Display (MFD), the Central Information Display (CID) is black. The backlight of the CID is illuminated, and touch function does register an audible sound.
B511224
Service Bulletin/Repair Instructions
There are two possible situations (rear left, right or both sides): A. The electric sunshade in the rear door does not function or sticks upon operation, and/or B. The electric sunshade is wavy.
B521923
Service Bulletin/Repair Instructions
In vehicles equipped with the second row 60% / 40% split seat, the flex cable assembly can come out of the seat rail mechanism (circled). This stops the forwards and backwards travel of the seat.
B640320
Service Bulletin/Repair Instructions
The center console and front cup holder get noticeably too warm to the touch on long journeys with the interior "Heating on".
InVeh-InApp-Comm
Over The Air
It was determined that your vehicle was fitted with a brake booster that potentially has a faulty hydraulic valve. This may result in a modified pedal feel and a sporadic red Check Control message. The brake booster should be replaced.
B512224
Service Bulletin/Repair Instructions
On the main door seal, detachment behaviorcan be detected at the sealing joint . Over time, the seal gradually and increasinglydetaches which can cause it to- Dangle Become visible to the customer Prevent the door from closing properly
B650826
Service Bulletin/Repair Instructions
After the software update to version …25-07-5XX, existing activation points for the “Automate My Habits”function no longer work.
B520126
Service Bulletin/Repair Instructions
The customer brings vehicle in with one or both of the second row 60/40 split seats in the folded position.The seat does not respond to any requests from the second seat row seat switch button(s).
B652725
Service Bulletin/Repair Instructions
The vehicle may experience various operational issues with the infotainment system such as: Resets of the head unit Delayed start-up of the head unit (longer than 30 seconds) Failed start-up of the head unit Sporadic or permanent problems with navigation Sporadic or permanent Bluetooth connection problems Sporadic or permanent audio problems Sporadic or permanent speech / IPA (international phonetic alphabet) problems Missing displays, radio stations, camera images or applications
B240225
Service Campaign
The threaded connection at the 48 power electronics (EME 48) may not have been properly secured. Further loosening of the connection could lead to a no-start or breakdown .
B510126
Service Campaign
A reference label for the tailgate SmartOpener (SMO) function (aka “touchless open,or “kick to open”) was mistakenly applied tothe bottom edge of the tailgate trim panel(either of the general locations circled) duringvehicle production.
B641325
Service Bulletin/Repair Instructions
When performing a vehicle test, diagnostic trouble code “ 8013FE Software run time error” is found in theIHKA module. If this fault is set for two consecutive life cycles, it will turn on the check engine light on vehicles with an I-level lower than 24-11-570. This fault memory entry does not cause an impairment of functionality of the automatic air conditioningsystem.
B160124
Service Campaign
RSU availability. The engine cranks but will not start.
B612924
Service Campaign
RSU availability. Due to a software error in the BCP, the Calibration Identification Number (CAL ID) and the Calibration Verification Number (CVN) of the vehicle are not stored correctly. They are generated with eachprogramming session and are used to identify official BMW software.
B652525
Service Bulletin/Repair Instructions
After the software update to I-level version …25-07-530, the Alexa app may disappear from the App Menu in the head unit (HU-H5).
B840625
Service Bulletin/Repair Instructions
In some situations, an emergency call may be triggered in the vehicle without either the customer pressing the SOS Call button, or an airbag deployment event. In some cases, the customer may not even be inside the vehicle.
B110525
Service Campaign
Due to an assembly error the upper oil pan screws may not have been torqued correctly.
B340825
Service Bulletin/Repair Instructions
Starting from I-level …24-07-500, it is possible that the Automatic Hold function is not automatically storedfor the next journey. The function must be activated again by the driver at the beginning of every trip. After asoftware update to 25-03-500 and higher, this occurs more frequently.
B064825
Other
Oil Drain Plug Return
B064625
Other
Control Arm Return
B521025
Service Bulletin/Repair Instructions
The electric actuator for the third row (3SR) seat changed design and part number, and is used in productionvehicles as of March 28, 2025. There are two such actuators at this seat row, one for the left seating position; and one for the right
B651925
Service Bulletin/Repair Instructions
Central Information Display (CID) in the vehicle is black or only displays “BMW”. The head unit (HU-H5) is not responding in ISTA. Additionally, the Receiver Audio Module (RAM), Instrument Cluster (KOMBI) and Telematic Module 4 (TCB4) may not be responding in ISTA.
B064425
Other
Tension Strut Return
B410424
Service Bulletin/Repair Instructions
A groaning sound from the front of the vehicle while driving can be heard, particularly while cornering. The groaning sound can be heard in the A-pillar/instrument panel area.
B510424
Service Bulletin/Repair Instructions
While driving on rough/uneven roads, a buzzing sound can be heard from the upper tailgate interior trim panel.
B110425
Service Campaign
Due to an assembly error the upper oil pan screws may not have been torqued correctly.
B240125
Emissions
A software error in the transmission control unit (EGS) will prevent OBD/emissions related information from being read out with a “scan tool”.
B110325
Service Bulletin/Repair Instructions
The “Check Engine Oil Level” warning is displayed while driving due to one of the following: Shortly after a detailed measurement has been carried out Shortly after engine oil has been topped up Shortly after an engine oil service has been carried out
B370225
Service Campaign
The air line on the air suspension supply system may not be properly installed. In the event of a fault, residual pressure is maintained in the struts and corresponding check control message.
B651125
Service Bulletin/Repair Instructions
When navigation is selected, only the start animation with the text “Starting navigation system...” isdisplayed. The Navigation application does not start. This only applies to vehicles where Navigation hasbeen enabled and has been verified to work previously.
B270220
Service Bulletin/Repair Instructions
There is a jerking or shuddering during either or both of the following: Cornering or accelerating from low speeds Driving with low to medium loads
B653524
Service Bulletin/Repair Instructions
Customers may report that the Central Information Display (CID) side of the Multifunction Display flickersonce on and off. This flickering is not continuous but may occur once every 15 to 50 seconds. No fault memory entry is stored for this customer complaint.
B840225
Service Bulletin/Repair Instructions
When making phone calls via BMW Bluetooth (not Apple CarPlay) in the vehicle, the person in the calloutside the vehicle hears a distorted voice reproduction.
B650825
Service Bulletin/Repair Instructions
Central Information Display (CID) side of the Multifunction Display may intermittently black out.
B511223
Service Bulletin/Repair Instructions
A vehicle listed above may arrive with a Check Control Message (CCM), and/or malfunction indicator lamp(MIL) illuminated. After carrying out the vehicle test, one or more of the stored faults indicate that the operation of the frontbottom active air flap is obstructed or blocked.
B610225
Service Campaign
Due to unfavorable tolerances, the Power Control Unit (PCU) may switch off under heavy loads and nolonger charge the Lithium-Ion (Li-Ion) Auxiliary (AUX) battery. This leads to the failure of the roll stabilization,and loss of communication to the EARS modules (S 0421 & S 0422).
B630125
Service Bulletin/Repair Instructions
Contamination/condensation in the uppersection of the Daytime Running Lights (DRL)headlight(s); driver’s headlamp shown.
B660325
Service Bulletin/Repair Instructions
A check control message is displayed, indicating that the parking assistance systems have limitedfunctionality due to errors detected within PDC sensors. The warning indicates parking assistance featureshave limited functionality while the errors continue to be detected. Following faults may be stored 8031BA Ultrasonic Sensor Rear Side Left Software Error 8031CO Ultrasonic Sensor Rear outer left Software Error 8031AE Ultrasonic Sensor Rear Outer Right Software Error 8031A8 Ultrasonic Sensor Rear Side Right Software Error 8031B4 Ultrasonic Sensor Rear Middle Right Software Error 8031C6 Ultrasonic Sensor Rear Middle Left Software Error 8031CD Ultrasonic Sensor Voltage Supply Sensors Back: Short Circuit 8031CC Ultrasonic Sensor Voltage Supply Front: Short Circuit 8031CA Ultrasonic Sensors Front Extraneous Noise
B520525
Service Bulletin/Repair Instructions
The customer states: The driver’s seat will not return to its last saved position. No seat memory. The heated seats settings in the menu are missing/different than in their previous BMW vehicle. They canno longer select, under the climate rules, at what temperature Fahrenheit the heated seats willautomatically turn on. Certain other “apps” and functions are not available The driver’s seat moves to an unknown memory position
B510824
Service Bulletin/Repair Instructions
The Augmented Reality Camera (ARCAM) shows up blurry when activated.
B650225
Service Bulletin/Repair Instructions
If the Head-Up Display (HUD) is deactivated when Navigation View is selected, upon reactivation the Head-Up Display (HUD) will revert to the Standard View. This is most noticeable when the Head-Up Display (HUD) deactivates for automatic mandatory reasons, such as rear camera activation or emergency call activation.
B110924
Service Campaign
Delivery Stop Flywheel
B110824
Service Bulletin/Repair Instructions
DELIVERY STOP: CHECK PCV SYSTEM
B652724
Service Bulletin/Repair Instructions
A check control message (CCM) for the restraint system (Air bag) appears. In the instrument cluster, the red air bag warning light lights up permanently. One of the following fault codes is stored in the ACSM (air bag control unit): 930949 - Knee airbag, driver: Short circuit to negative terminal 93094F - Knee airbag, front passenger: Short circuit to negative terminal 93094C - Knee airbag driver's side: Resistance too great 930952 - Knee airbag, front passenger: Resistance too great
B067724
Other
Heat Management Module Return
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.