N232428540-01
Service Campaign
Certain vehicles may require software updates that improve the customer experience and optimize future over-the-air updates. Dealers will perform a comprehensive software update.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
N232428540-01
Certain vehicles may require software updates that improve the customer experience and optimize future over-the-air updates. Dealers will perform a comprehensive software update.
24-NA-048
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the rear automatic braking may brake unwantedly, usually when reversing out of a garage or driveway.
24-NA-113
This service bulletin provides information for dealers/technicians on Vehicle Wide Programming Instructions.
24-NA-132
Warranty Administration - Claim Submission for Field Actions using Vehicle Wide Programming.
24-NA-038
This service bulletin provides Radio Software update Version W27E-172.5.1-M169-SQBR4-126.3 repair information to correct customer concerns of radio software issues.
99-04-20-002O
This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
22-NA-083
This service bulletin provides Requirements for Replacement of the Dual Mode Cord Set Under Warranty.
PIE0788C
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to MIL illuminated on DIC to correct BET and BEV3 Ultium Packs Setting Moving Average Voltage Detection (MAVD) and Delta Voltage Rest Period (DVRP) Fault Codes.
22-NA-070
This service bulletin provides information for replacement parts traceability (RPT) process to aid in tracking part replacements.
18-NA-099
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
22-NA-018
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only).
18-NA-125
This service bulletin provides information for engine oil life monitor operation calculation.
PIE0788B
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to MIL illuminated on DIC to correct BET and BEV3 Ultium Packs Setting Moving Average Voltage Detection (MAVD) and Delta Voltage Rest Period (DVRP) Fault Codes.
21-NA-068
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with RPO ATH and AVJ.
24-NA-098
This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
20-NA-016
This Warranty Administration bulletin provides information on customer vehicles concern results in a manufacturer repurchase from the customer, GM depends on the dealership to host and administer the repurchase closing and intake of the returning vehicle.
23-NA-151
This service bulletin and criteria within are to determine the internal state of the High Voltage Battery and core return shipping method.
PIE0778A
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to steering loss of assist while driving.
08-07-30-035H
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
23-NA-064
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships.
16-NA-119
This warranty administration bulletin provides policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
09-00-89-008G
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
24-NA-082
This technical bulletin provides a procedure to correct the condition of Clicking Noise at Slow Speeds.
PIE0788A
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to MIL illuminated on DIC to correct BET and BEV3 Ultium Packs Setting Moving Average Voltage Detection (MAVD) and Delta Voltage Rest Period (DVRP) Fault Codes.
18-NA-067
This service bulletin provides information for cleaning brake dust off of aluminum or chrome wheels.
22-NA-106
This service bulletin provides information on GM Canada New Vehicle Tire Warranty Program for Original Equipment (OE) Tires and PDI installed Limited Production Option (LPO) Tires.
22-NA-244
This service bulletin provides information about GM Accessories - Dealer-Installed, Repaired or Replaced During Warranty Coverage Period.
23-NA-154
This bulletin provides information on Warranty Administration – Required Operating Procedures - 8 Points (U.S. Only).
06-00-89-029V
This service bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
21-NA-043
This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
10-08-110-001K
This service bulletin provides information on proper use of floor mats.
13-08-116-001J
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
15-00-89-004G
This service bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
18-NA-279
This service bulletin provides information for dealers/technicians on the process to disable and enable passive unlocking.
23-NA-125
This service bulletin provides information for dealers/technicians on Over The Air (OTA) and In Market Enhancement (IME) FAQs.
00-03-10-006P
This service bulletin provides information for dealers/technicians on Tire Radial Force Variation (RFV).
PIE0779B
This engineering information (EI) closure ends the need for gathering further information from the field. Dealers should refer to Field action N232428540 in SI.
22-NA-038
This warranty bulletin provides information on Customer Concern Not Duplicated (CCND) Labor Operation Numbers.
20-NA-132
This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
17-NA-052
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed.
24-NA-069
This technical bulletin provides repair information to correct a customer concern of Image Processing Module setting DTC U3000_57.
10-08-45-001H
This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
23-NA-103
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC).
PIP5961A
This Preliminary information communicates to the dealer that no hardware parts as needed to repair the vehicle and to follow programming procedure to repair and fix the codes that were present. The Programming of the BECM will repair the concern due to programming out the sensor that is no longer used due to quality issues with the sensor.
PIT6044G
This Preliminary information communicates that a Software update is in the works and to disconnect the 12 volt battery to clear the codes.
PIT5962A
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.