CARV4A9B08
Service Bulletin/Repair Instructions
Potential safety hazard associated with Vector 8500 and 8600MT Battery Cable Clamp Installation
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
CARV4A9B08
Potential safety hazard associated with Vector 8500 and 8600MT Battery Cable Clamp Installation
98-50371-00
A TECHNICAL INSTRUCTION FOR INSTALLING INSULATION BETWEEN THE TOP EDGE OF THE BACK PANEL AND EVAPORATOR HOUSING.
L0003157
Tail light bulb assembly
SER15022
Software.
Dealer Email
Vectkor Field Action -
SER15-005
CARRIER TRANSICOLD: VECTOR, X2 AND X4 EQUIPPED WITH APX CONTROL SYSTEMS NEEDS UPDATED SOFTWARE, DECALS, AND OPERATOR MANUALS. *TA
SER15-003
CARRIER TRANSICOLD: SOME X4 7300/7500 & VECTOR 8500/8600MT UNITS NEEDS ENGINE LIFT PUMP OIL SUPPLY LINE WAS NOT TORQUED/INSTALLED PROPERLY. *TA.
62-SKA-11237-00
CARRIER TRANSICOLD: DEALER LETTER EXPLAINS THAT CARRIER TRANSICOLD WILL BE INSTALLING A NEW SOFTWARE FEATURE CALLED "INSPECT MODE" TO PREVENT ANY UNIT FROM STARTING ONCE THE MODE IS ACTIVATED. *TA.
Battery
Battery cable clamp installation
SER-APU13-007
PG1000 APU Shore Power Cable. It is the AC cable assembly that runs from the Shore Power Outlet to the Shore Power Manager. Certain PG1000 Shore Power Kits shipped prior to September 6, 2013 may have an oversized cable in the kit. This will cause difficulty when attempting to connect the cable to the Shore Power Manager due to the thickness of the insulation.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.