PIP4902W
Service Bulletin/Repair Instructions
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
Vehicle report
2012 CHEVROLET EXPRESS
Service bulletins
1453 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
PIT6247B
Service Bulletin/Repair Instructions
This Preliminary information communicates direction to find information at www.gmupfitter.com for Police and Special Service Vehicles.
PIT3271Q
Service Bulletin/Repair Instructions
This preliminary information communicates information about how to determine if a wheel and tires size change is available.
PIP4902V
Service Bulletin/Repair Instructions
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
PIP6104
Service Bulletin/Repair Instructions
This Preliminary information communicates the steps on how to save a GDS2 Session Log and upload to a Technical Assistance Case in CX Connect.
PIT6400A
Service Bulletin/Repair Instructions
This PI Communications information on an alternative product dealers can use to perform 19-NA-255: Wax Coating on Frame Peeling, Metal Shows Corrosion/Rusting due to issue with getting product from current supplier listed in the bulletin.
PIP4902U
Service Bulletin/Repair Instructions
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
PIT5214G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer’s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
PIT6448
Service Bulletin/Repair Instructions
This preliminary information states to reuse a fastener during a front sensor replacement due to a supply issue.
13598
Other
New Vehicle Monitoring Programs Section in IVH
PIP4902T
Service Bulletin/Repair Instructions
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
PIC5650M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, B3935, C0750, C0755, C0760, C0765, and/or C0775.
PIT6247A
Service Bulletin/Repair Instructions
This Preliminary information communicates direction to find information at www.gmupfitter.com for Police and Special Service Vehicles.
PIT6400
Service Bulletin/Repair Instructions
This PI Communications information on an alternative product dealers can use to perform 19-NA-255: Wax Coating on Frame Peeling, Metal Shows Corrosion/Rusting due to issue with getting product from current supplier listed in the bulletin.
PIP4902S
Service Bulletin/Repair Instructions
This preliminary information advises a dealer on how to email GDS2 session logs into Technical Assistance.
25-NA-156
Service Bulletin/Repair Instructions
This service bulletin provides information on Tire Sidewall Irregularities.
00-06-01-026R
Service Bulletin/Repair Instructions
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
PIT5074R
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.
23-NA-153
Service Bulletin/Repair Instructions
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
23-NA-001
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on OnStar Module 2G Sunset Information.
08-03-10-006I
Service Bulletin/Repair Instructions
This service bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel Bead Seat Corrosion.
15-06-03-001F
Service Bulletin/Repair Instructions
This service bulletin provides information to diagnose batteries that have set for a long period of time and/or cold weather climates and testing those batteries.
19-NA-255
Service Bulletin/Repair Instructions
This service bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
25-NA-052
Service Bulletin/Repair Instructions
This bulletin advises the technician to flush the cooling system multiple times if oil has been found in the cooling system and replace the parts that may be contaminated due to oil in system.
PIP5358D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
21-NA-043
Service Bulletin/Repair Instructions
This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
22-NA-074
Service Bulletin/Repair Instructions
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
09-06-04-026Z
Service Bulletin/Repair Instructions
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
03-06-01-023I
Service Bulletin/Repair Instructions
This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
PIT5074Q
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
PIT5962B
Service Bulletin/Repair Instructions
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses.
04-06-01-029K
Service Bulletin/Repair Instructions
This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules.
PIP4723J
Service Bulletin/Repair Instructions
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIP6015
Service Bulletin/Repair Instructions
This Preliminary information communicates to the dealer a process for accessing the procedure to add attachments to a GM technical assistance case using the dealer case management tool.
10-00-89-009F
Service Bulletin/Repair Instructions
This service bulletin provides information on key code security rules and information on GM keycode look-up applications (U.S).
03-06-01-023H
Service Bulletin/Repair Instructions
This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
01-06-01-011Q
Service Bulletin/Repair Instructions
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
20-NA-132
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
07-00-89-037T
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
PIT6247
Service Bulletin/Repair Instructions
This Preliminary information communicates direction to find information at www.gmupfitter.com for Police and Special Service Vehicles.
04-06-04-051J
Service Bulletin/Repair Instructions
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
23-NA-219
Service Bulletin/Repair Instructions
This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
20-NA-138
Service Bulletin/Repair Instructions
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
08-07-30-026I
Service Bulletin/Repair Instructions
This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
18-NA-146
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
PIT5099H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
02-00-89-002X
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
PIC5650L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PIT3271P
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
24-NA-174
Service Bulletin/Repair Instructions
The bulletin provides direction on how to locate the Temporary Service Part (TSP) form in GlobalConnect.
General Communication
Service Campaign
Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
05-03-08-002J
Service Bulletin/Repair Instructions
This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
18-NA-073
Service Bulletin/Repair Instructions
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
19-NA-237
Service Bulletin/Repair Instructions
This service bulletin explains how to identify possible DEF system contamination.
01-00-89-010S
Service Bulletin/Repair Instructions
This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
16-NA-244
Service Bulletin/Repair Instructions
This informational bulletin provides information on Diesel Exhaust Fluid (DEF) and the proper use of the DEF system.
16-NA-380
Service Bulletin/Repair Instructions
This service bulletin provides a diagnostic aid procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe.
07-06-01-016J
Service Bulletin/Repair Instructions
This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
00-06-01-012N
Service Bulletin/Repair Instructions
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
05-06-04-022V
Service Bulletin/Repair Instructions
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
16-NA-222
Service Bulletin/Repair Instructions
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
09-06-04-026Y
Service Bulletin/Repair Instructions
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
01-06-01-011P
Service Bulletin/Repair Instructions
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
18-NA-306
Service Bulletin/Repair Instructions
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
PI0754G
Service Bulletin/Repair Instructions
This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
16-NA-158
Service Bulletin/Repair Instructions
This service bulletin describes the U.S. Dealer Special Tool Loan Program process.
24-NA-141
Service Bulletin/Repair Instructions
GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
00-03-10-002M
Service Bulletin/Repair Instructions
This service bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
17-NA-157
Service Bulletin/Repair Instructions
This service bulletin explains the difference in oil filters for gas engines with new oil pump control systems and the possibilities of what may happen using the incorrect filter.
99-04-20-002O
Service Bulletin/Repair Instructions
This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
04-06-04-051I
Service Bulletin/Repair Instructions
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
16-NA-383
Service Bulletin/Repair Instructions
This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
18-NA-099
Service Bulletin/Repair Instructions
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
18-NA-125
Service Bulletin/Repair Instructions
This service bulletin provides information for engine oil life monitor operation calculation.
24-NA-098
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
20-NA-016
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on customer vehicles concern results in a manufacturer repurchase from the customer, GM depends on the dealership to host and administer the repurchase closing and intake of the returning vehicle.
08-07-30-035H
Service Bulletin/Repair Instructions
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
16-NA-119
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
09-00-89-008G
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
06-00-89-029V
Service Bulletin/Repair Instructions
This service bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
10-08-110-001K
Service Bulletin/Repair Instructions
This service bulletin provides information on proper use of floor mats.
13-08-116-001J
Service Bulletin/Repair Instructions
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
15-00-89-004G
Service Bulletin/Repair Instructions
This service bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
00-03-10-006P
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on Tire Radial Force Variation (RFV).
17-NA-052
Service Bulletin/Repair Instructions
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed.
10-08-45-001H
Service Bulletin/Repair Instructions
This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
23-NA-103
Service Bulletin/Repair Instructions
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC).
07-00-89-037S
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
PIT5110D
Service Bulletin/Repair Instructions
HI
11-00-89-005X
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PIP5596A
Service Bulletin/Repair Instructions
This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
17-NA-073
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
19-NA-044
Service Bulletin/Repair Instructions
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
16-NA-338
Service Bulletin/Repair Instructions
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
PI0281K
Service Bulletin/Repair Instructions
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
02-08-42-001J
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
PI1394B
Service Bulletin/Repair Instructions
This PI bulletin advises the technician on the proper way to install the pistons in an engine.
PIP5601B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
PI0592I
Service Bulletin/Repair Instructions
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961).
23-NA-224
Service Bulletin/Repair Instructions
This bulletin advises the technician that the 6L50 (MYB), 6L80 (MYC) and 6L90 (MYD) Transmission Oil Filter and Seal Kit part number 24236933 is currently transitioning from a kit to the filter (24236517) and seal (24225347) being sold individually.
PIT5074P
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
PIT5962A
Service Bulletin/Repair Instructions
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses.
PIT5214F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
03-00-91-001I
Service Bulletin/Repair Instructions
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns.
20-NA-159
Service Bulletin/Repair Instructions
This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
05-00-89-029F
Service Bulletin/Repair Instructions
This service bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
01-06-01-011O
Service Bulletin/Repair Instructions
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
17-NA-170
Service Bulletin/Repair Instructions
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
02-00-89-002W
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
10-00-89-006J
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
PIT5099G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
07-08-49-020R
Service Bulletin/Repair Instructions
This informational bulletin provides information for the IPC odometer programming method quick reference guide.
PIP4112T
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This concern may also be present while cruising at highway speeds and then an aggressive increase in throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to downshift.
23-NA-144
Service Bulletin/Repair Instructions
This technical bulletin provides information and a solution to a condition of Brake Pedal Moves or Self Applies at Full Turns.
09-00-89-016H
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on the proper use of the labor operation 0600014.
PIP5628G
Service Bulletin/Repair Instructions
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
15-00-89-004F
Service Bulletin/Repair Instructions
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
10-06-05-002M
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owner Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
01-00-89-010R
Service Bulletin/Repair Instructions
This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
04-06-04-051H
Service Bulletin/Repair Instructions
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
03-06-01-023G
Service Bulletin/Repair Instructions
This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
09-06-04-026X
Service Bulletin/Repair Instructions
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
17-NA-066
Service Bulletin/Repair Instructions
This service bulletin provides information for automatic transmission Oil Cooler Flush and flow test.
PIP5358C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
21-NA-026
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
99-09-40-005I
Service Bulletin/Repair Instructions
This service bulletin provides information on availability for a seat belt extender.
PIP4902R
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
01-06-01-011N
Service Bulletin/Repair Instructions
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
99-08-51-001F
Service Bulletin/Repair Instructions
This service bulletin provides information on Paintless Dent Repair Process.
13-08-116-001I
Service Bulletin/Repair Instructions
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
PIT4261J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
04-07-30-013E
Service Bulletin/Repair Instructions
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use.
02-00-89-002V
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
08-07-30-026H
Service Bulletin/Repair Instructions
This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
12-03-10-001E
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel).
PIT3665M
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
PIC5650K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
11-00-89-005W
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
19-NA-219
Service Bulletin/Repair Instructions
This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
PIP5628F
Service Bulletin/Repair Instructions
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
12-03-10-001D
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel).
08-07-30-035G
Service Bulletin/Repair Instructions
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
10-08-110-001J
Service Bulletin/Repair Instructions
This service bulletin provides information on proper use of floor mats.
11-00-89-005V
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PI0281J
Service Bulletin/Repair Instructions
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
03-06-04-017S
Service Bulletin/Repair Instructions
This service bulletin provides information on availability of Diesel Fuel additives.
00-06-01-012M
Service Bulletin/Repair Instructions
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
00-06-01-026Q
Service Bulletin/Repair Instructions
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
22-NA-009
Service Bulletin/Repair Instructions
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
07-06-01-016I
Service Bulletin/Repair Instructions
This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
10-06-05-002L
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
16-NA-130
Service Bulletin/Repair Instructions
This service bulletin provides information for after installation of a replacement upper valve body, the transmission may have no Reverse and no 2nd gear.
15-NA-017
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment.
18-NA-263
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information for variable diagnostic time allowances on select labor operations (U.S. Only).
PI0754F
Service Bulletin/Repair Instructions
This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
99-04-20-002N
Service Bulletin/Repair Instructions
This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
01-08-42-001O
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
PIP5628E
Service Bulletin/Repair Instructions
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
00-00-90-002M
Service Bulletin/Repair Instructions
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks.
07-03-16-004E
Service Bulletin/Repair Instructions
This service bulletin provides information for tire pressure monitoring (TPM) system concerns.
02-00-89-002U
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
09-00-89-008F
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
PIP5540J
Service Bulletin/Repair Instructions
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
21-NA-124
Service Bulletin/Repair Instructions
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
PIP5632G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP4902Q
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIT3271N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
08-08-51-003K
Service Bulletin/Repair Instructions
This informational bulletin advised the dealer to remove the protective film from the bumpers and how to clean/remove the adhesive.
22-NA-205
Service Bulletin/Repair Instructions
This service bulletin provides information on Module Harvesting.
PIT3665L
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
10-00-89-006I
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
PIC5453D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. The General Motors of Canada Customer Care Centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required USA regulatory standards necessary for importation into the USA.
22-NA-185
Service Bulletin/Repair Instructions
This informational bulletin explains how the trans slip or flare can be a normal condition.
22-NA-195
Service Bulletin/Repair Instructions
This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada.
PI0592G
Service Bulletin/Repair Instructions
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961).
PIP5429A
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the customer may experience a 2-3 slip or flare after the vehicle has been sitting for a period of time. Technician can update the Transmission Control Module if working on a model year 2007. On all other model years dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
05-06-04-022T
Service Bulletin/Repair Instructions
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
06-00-89-031H
Service Bulletin/Repair Instructions
This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
07-06-01-016H
Service Bulletin/Repair Instructions
This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
13-08-116-001H
Service Bulletin/Repair Instructions
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
15-00-89-004E
Service Bulletin/Repair Instructions
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
01-00-89-010Q
Service Bulletin/Repair Instructions
This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
05-00-89-072F
Service Bulletin/Repair Instructions
This service bulletin provides the technician with additional information on fuels, fuel additives and fuel management.
09-06-04-026W
Service Bulletin/Repair Instructions
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
18-NA-103
Service Bulletin/Repair Instructions
This service bulletin provides service information for customer concerns of an in-tank fuel pump whining noise, engine hard to start and/or stalls and Malfunction Indicator Lamp (MIL) is illuminated that may be caused by gelling of fuel in cold temperatures.
00-06-01-012L
Service Bulletin/Repair Instructions
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
01-06-01-011M
Service Bulletin/Repair Instructions
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
03-06-04-017Q
Service Bulletin/Repair Instructions
This service bulletin provides information on availability of Diesel Fuel additives.
04-06-04-051G
Service Bulletin/Repair Instructions
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
10-06-05-002K
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
00-06-01-026P
Service Bulletin/Repair Instructions
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
11-00-89-005U
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
05-00-89-029E
Service Bulletin/Repair Instructions
This service bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
22-NA-181
Service Bulletin/Repair Instructions
This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
PIP5640A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
11-00-89-005T
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
20-NA-065
Service Bulletin/Repair Instructions
This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
22-NA-149
Service Bulletin/Repair Instructions
This informational bulletin provides you with contacts in event of the installation of Cruise control.
PIT4261H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
PI1080D
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information on installing a reinforcement to correct a customer concern that a crack has developed on the spring mount area of the front shock absorber mounting bracket.
PIC5260F
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
PIT4844K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with the installation of Cruise Control on a vehicle which did not come equipped with the option. Technician will need to contact the Techline Customer Support Center to determine if a calibration is available for the vehicle. If they are able to provide a calibration for the vehicle then order steering wheel with cruise control buttons, steering wheel sir coil, and steering column wiring harness.
PIT5099F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
16-NA-109
Service Bulletin/Repair Instructions
This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
PIP5358B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
PIP5856
Service Bulletin/Repair Instructions
This Preliminary information communicates provides information to the technician on the use of R-99 or R-95 Renewable diesel fuel.
12-00-89-003B
Service Bulletin/Repair Instructions
This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
03-06-01-023E
Service Bulletin/Repair Instructions
This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
18-NA-102
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to repair a possible wiring harness repair if damaged by the parking brake, brake booster mount or brake pedal bolt.
PIC5260E
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
01-00-89-010P
Service Bulletin/Repair Instructions
This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
PI0281I
Service Bulletin/Repair Instructions
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
01-00-89-010O
Service Bulletin/Repair Instructions
This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
04-06-04-051F
Service Bulletin/Repair Instructions
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
05-00-89-072E
Service Bulletin/Repair Instructions
This service bulletin provides the technician with additional information on fuels, fuel additives and fuel management.
PIT3271M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIT3271L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
080089014G
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
080604006N
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with Information for Identifying non-GM ECM calibration use and Power-Up hardware detection in Duramax⢠diesel engines â Photograph Tech 2® Calibration IDs, Calibration Verification Numbers (CVNs) and Transmission Data Screen.
PIP5276G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides steps the technician will uses to diagnose and repair vehicles that have low oil pressure after an oil change with the engine Regular Production Option Code L20, L77, L94, L96, L99, L9H, LC8, LC9, LH9, LMF, LMG, LY6, or LZ1. Vehicle may have Service Engine Soon lamp with Diagnostic Trouble Code P0521 or Low Oil Pressure message on the instrument panel. Dealer will need to determine if bulletin 10-06-01-008 was completed. If the bulletin was performed inspect the left rocker cover. Dealer will insure the left rocker can hold water without leaking. If leaks are found apply room temperature vulcanization silicone to the rocker cover if possible or replace the left rocker cover.
070601016G
Service Bulletin/Repair Instructions
This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
150089004D
Service Bulletin/Repair Instructions
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
PI0653F
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information on Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center.
21NA282
Service Bulletin/Repair Instructions
This bulletin provides a procedure to replace the shifter cable, lever and bracket if the shifter at the lever located at the trans, has popped off.
18NA103
Service Bulletin/Repair Instructions
This service bulletin provides service information for customer concerns of an in-tank fuel pump whining noise, engine hard to start and/or stalls and Malfunction Indicator Lamp (MIL) is illuminated that may be caused by gelling of fuel in cold temperatures.
PIP4902P
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP4723F
Service Bulletin/Repair Instructions
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIP5632F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
22NA009
Service Bulletin/Repair Instructions
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
070316004D
Service Bulletin/Repair Instructions
This service bulletin provides information for tire pressure monitoring (TPM) system concerns.
16NA380
Service Bulletin/Repair Instructions
This service bulletin provides a diagnostic aid procedure on how to perform a quick test to check if the DPF is the cause of excessive soot from the tailpipe.
19NA237
Service Bulletin/Repair Instructions
This informational bulletin explains how to identify possible DEF contamination.
030604017P
Service Bulletin/Repair Instructions
This service bulletin provides information on availability of Diesel Fuel additives.
16NA222
Service Bulletin/Repair Instructions
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
16NA244
Service Bulletin/Repair Instructions
This informational bulletin provides information on Diesel Exhaust Fluid (DEF) and the proper use of the DEF system.
100605002J
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
000090002L
Service Bulletin/Repair Instructions
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks.
050604022S
Service Bulletin/Repair Instructions
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
1308116001G
Service Bulletin/Repair Instructions
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
030310007K
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on Tire/Wheel Characteristics (Vibration, Balance, Shake, Flat Spotting) of GM Original Equipment Tires.
030091001H
Service Bulletin/Repair Instructions
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns.
PIT3099U
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support.
PIC5650J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
21NA152
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on glass ultraviolet (UV) Ray protection and tint percentage.
010842001N
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
PIT4261G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles with tire sidewall irregularities. This is a visual condition that will not affect durability, reliability or performance of the tires. Dealer should communicate to the customer that slight sidewall indentations are a common characteristic of radial tire construction.
990420002L
Service Bulletin/Repair Instructions
This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
PIP5632E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
080730035E
Service Bulletin/Repair Instructions
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
070089037Q
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
PIT5125F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles proper operation of the stop and/or turn signals. For vehicles without Regular Production Option Code V4D circuit 618 is for the left stop and turn signal and circuit 619 dark green is for the right stop and turn signal. For vehicles with Regular Production Option Code V4D circuit 618 yellow is for the left turn signal only. Circuit 619 dark green is for the right turn signal only and circuit 1320 light blue is for the stop lamps only.
21NA124
Service Bulletin/Repair Instructions
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
PIT5058G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the operation and diagnostics of the Regular Production Option Code UJ1 brake warning pressure warning system. The technician can test the operation of the brake warning system. If the warning system does not function correctly, technician will need to inspect circuit 33 for a short to ground between X141 and the Instrument Panel Cluster terminal 14. Then inspect check circuit 33 for an open between X141 and the Instrument Panel Cluster terminal 14. Also technician should check male side of X141 circuit 33 with an ohm meter to ground and should be close to 0 ohms with engine off and key on. Start engine and circuit should go (OL) indicating that the flow switch opened. Then, turn the steering to the stop in pressure relief and verify that the circuit stays (OL) to check the operation of the pressure switch.
18NA306
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
070089037P
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
100089006H
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
16NA102
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to clean and repair the complete fuel system due to dirt getting into the fuel system causing the vehicle to have a hard or no start.
PIP5358A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an unusual noise and is difficult to identify, isolate or pinpoint. Technician should get record a sound clip or take a video of the noise for assessment by engineering. Technician will need to call General Motors Technical Assistance Center for further assistance.
PIT5214E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
20NA159
Service Bulletin/Repair Instructions
This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
19NA044
Service Bulletin/Repair Instructions
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy.
16NA338
Service Bulletin/Repair Instructions
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
PI0653A
Service Bulletin/Repair Instructions
Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center A Service Agent (Dealer) during vehicle service may need to replace an engine turbocharger (TC). Any turbocharger that is returned to the Warranty Parts Center (WPC) will be inspected by engineering for root cause failure. The Warranty Part Center (WPC) has received turbochargers returned by Service Agents that have been disassembled, damaged during removal from the engine, electrical harnesses or connectors that have been cut or removed from the turbocharger and/or improperly packaged turbochargers resulting in shipping damage.
21NA103
Service Bulletin/Repair Instructions
This service bulletin provides information regarding Witness Marks from Panel Adjustments Made During Manufacturing and that it is considered a normal condition.
000601026N
Service Bulletin/Repair Instructions
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
050308002I
Service Bulletin/Repair Instructions
This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
18NA146
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
020089002T
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
18NA099
Service Bulletin/Repair Instructions
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
PIP5163E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
PIC5260D
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
PIP5540G
Service Bulletin/Repair Instructions
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5725A
Service Bulletin/Repair Instructions
This Preliminary information communicates the use of Winter grade fuel during the warm months of 2020 and the potential rivability issues that it can cause. The ongoing Coronavirus (COVID-19) pandemic has caused significant reductions in driving and fuel use. Due to the surplus of winter grade fuel sitting in storage (pipelines/stations) the EPA is waiving the fuel vapor requirement. This will extend the use of winter fuel into the summer months. The drivability concerns should not be single events but should be multiple occurrences associated with hot days.
110089005Q
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
1008110001I
Service Bulletin/Repair Instructions
This informational bulletin provides information on proper use of floor mats.
20NA138
Service Bulletin/Repair Instructions
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
19NA255
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
21NA043
Service Bulletin/Repair Instructions
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
16NA109
Service Bulletin/Repair Instructions
This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear.
150089004C
Service Bulletin/Repair Instructions
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
21NA026
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen.
010601011L
Service Bulletin/Repair Instructions
This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
090604026S
Service Bulletin/Repair Instructions
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
18NA263
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information for variable diagnostic time allowances on select labor operations (U.S. Only).
060089031F
Service Bulletin/Repair Instructions
This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
PIT5074N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
030604017O
Service Bulletin/Repair Instructions
This Informational Bulletin provides information on availability of Diesel Fuel additives.
000310002L
Service Bulletin/Repair Instructions
This service bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
PIT3271K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
990851001E
Service Bulletin/Repair Instructions
Thins informational bulletin provides information on Paint-less Dent Repair Process.
PI0754D
Service Bulletin/Repair Instructions
This PI provides information on Rear and Side Tempered Glass Spots (Quench Marks) and that they are a normal characteristic.
100605002I
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
20NA213
Service Bulletin/Repair Instructions
This service bulletin provides information on Improved Oil Filter Gasket Design for Spin-On Oil Filters PF63, PF64 and PF48.
1308116001F
Service Bulletin/Repair Instructions
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
PIP5684C
Service Bulletin/Repair Instructions
This Preliminary information communicates the use of air leak diagnostic test tool CH-52250 in addition to the information found in the service manual.
050604022R
Service Bulletin/Repair Instructions
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
PIP5628C
Service Bulletin/Repair Instructions
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
110089005P
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
PIP5226D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
PIT5099E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
PIC5650H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
20NA026
Service Bulletin/Repair Instructions
This technical bulletin provides repair information to correct a customer concern of Loss of Radio Audio Shortly After an OnStar In-Vehicle Voice Message Is Heard.
PIP5684B
Service Bulletin/Repair Instructions
This Preliminary information communicates the use of air leak diagnostic test tool CH-52250 in addition to the information found in the service manual.
PIP4902N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP4912G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on vehicles that may have an intermittent high idle. If a technician has duplicated, or the customer description aligns with the speeds mentioned in the idle speed description tables, the idle speed should be considered a normal characteristic of current vehicle design.
PIT3665J
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
PIT5206G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages ? Brake Pedal Override Feature ?, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set. Technician will use this preliminary information to find the brake pedal position data parameters in the scan tool, and also to provide some additional diagnostic help. These issues may be caused by an incorrect brake pedal position sensor input to the engine control module. Technician will verify with the scan tool if the engine control module has the correct parameters for the brake pedal position sensor. If an engine control module brake pedal position sensor relearn is performed, the truck may be temporarily repaired until the intermittent wiring issue between the engine control module and brake pedal position sensor occurs again. On 2014 and newer trucks inspect and repair any damage to X115 and X119. On the 2014 and previous trucks inspect and repair any damage to X205.
120232002B
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to eliminate a power steering noise due to extremely low temperatures.
PIC5453C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. The General Motors of Canada Customer Care Centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required USA regulatory standards necessary for importation into the USA.
110089005O
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on Dealer Empowerment for Goodwill, Customer Enthusiasm and Policy (U.S. Only).
030601023D
Service Bulletin/Repair Instructions
This information bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
060089029T
Service Bulletin/Repair Instructions
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
PIP5628B
Service Bulletin/Repair Instructions
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
070849020Q
Service Bulletin/Repair Instructions
This informational bulletin provides information for the IPC odometer programming method quick reference guide.
16NA383
Service Bulletin/Repair Instructions
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
PIP5725
Service Bulletin/Repair Instructions
This Preliminary information communicates the use of Winter grade fuel during the warm months of 2020 and the potential rivability issues that it can cause. The ongoing Coronavirus (COVID-19) pandemic has caused significant reductions in driving and fuel use. Due to the surplus of winter grade fuel sitting in storage (pipelines/stations) the EPA is waiving the fuel vapor requirement. This will extend the use of winter fuel into the summer months. The drivability concerns should not be single events but should be multiple occurrences associated with hot days.
030089006R
Service Bulletin/Repair Instructions
This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
060089029S
Service Bulletin/Repair Instructions
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
PIP5684A
Service Bulletin/Repair Instructions
This Preliminary information communicates the use of air leak diagnostic test tool CH-52250 in addition to the information found in the service manual.
000310003Z
Service Bulletin/Repair Instructions
This Warranty Administration bulletin is for information on General Motors New Vehicle Tire Warranty Program (U.S. Dealers Only).
060089029R
Service Bulletin/Repair Instructions
This informational bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
PIC5650G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, and/or B3935. Technician should not replace any parts for this concern. If unable to duplicate the concern ask if the customer uses any Radio Frequency Identification Devices when the concern is present. Dealer should also direct their customers to the appropriate section in the Owner manuals that references that the device complies.
PI0281H
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
060089029Q
Service Bulletin/Repair Instructions
This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
100089005I
Service Bulletin/Repair Instructions
This warranty administration bulletin explains to the technician that when using wiring repair labor operations, additional information may be needed when submitting Global Warranty transactions when doing wiring repairs.
PIT4844J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with the installation of Cruise Control on a vehicle which did not come equipped with the option. Technician will need to contact the Techline Customer Support Center to determine if a calibration is available for the vehicle. If they are able to provide a calibration for the vehicle then order steering wheel with cruise control buttons, steering wheel sir coil, and steering column wiring harness.
060089029P
Service Bulletin/Repair Instructions
This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
070089037O
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information for courtesy transportation and roadside assistance programs.
020089002S
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
050310020G
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Use of Nitrogen Gas in Tires.
040601029J
Service Bulletin/Repair Instructions
This informational bulletin explains Unscheduled Supplemental Services (including Flushing Services and Additives) and the Proper use of GM Simplified Maintenance Schedules.
19NA219
Service Bulletin/Repair Instructions
This diagnostic tip provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
000310003Y
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on the tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
16NA119
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information to cover GMs policy on performing GM covered vehicle services and maintenance on vehicles originating/sold in Canada.
PIT3099T
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support.
PIP4723D
Service Bulletin/Repair Instructions
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
050307009I
Service Bulletin/Repair Instructions
This informational bulletin provides retail, wholesale and fleet personnel with General Motors recommendations for customer concerns related to wheel alignment.
20NA016
Service Bulletin/Repair Instructions
This Warranty Administration bulletin provides information on customer vehicles concern results in a manufacturer repurchase from the customer, GM depends on the dealership to host and administer the repurchase closing and intake of the returning vehicle.
PIP5540F
Service Bulletin/Repair Instructions
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PI0592F
Service Bulletin/Repair Instructions
This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961).
080851003J
Service Bulletin/Repair Instructions
This informational bulletin advised the dealer to remove the protective film from the bumpers and how to clean/remove the adhesive.
100089009D
Service Bulletin/Repair Instructions
This informational bulletin provides information on key code security rules and information on GM keycode look-up applications.
080089014F
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
PIT5410B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that will not change Heater-Vent-Air Conditioning modes, Defrost or RECIRC positions. Technician will need to gain access to the vacuum lines from Heater-Vent-Air Conditioning control and inspect for a pinch or a open in the line. Technician will repair the line for this concern.
010842001M
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
080310006G
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure on how to clean and resurface aluminum wheel bead seats for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel Bead Seat Corrosion.
PIT3271J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIT5074M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
990420002K
Service Bulletin/Repair Instructions
This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
PIP5684
Service Bulletin/Repair Instructions
This Preliminary information communicates the use of air leak diagnostic test tool CH-52250 in addition to the information found in the service manual.
PIP5370E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that some vehicle may have an ?Exhaust Fluid Quality Poor? on the Driver Information Center or a diesel exhaust fluid warning lamp on or other exhaust fluid quality related concerns. Technician will inspect the diesel exhaust fluid for contamination. Technician should use Service Information for Contaminants in Diesel Exhaust Fluid Diagnosis and use special tool J26568 or EN50422 Diesel Exhaust Fluid Refractometer for fluid testing.
100089006G
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers how to submit a product information report (PIR) (Canada Only).
100605002H
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
PIP5540E
Service Bulletin/Repair Instructions
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5601A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
010601011K
Service Bulletin/Repair Instructions
This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
100089009C
Service Bulletin/Repair Instructions
This informational bulletin provides information on key code security and information on GM key code look up applications.
010089010N
Service Bulletin/Repair Instructions
This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
030604017N
Service Bulletin/Repair Instructions
This Informational Bulletin provides information on availability of Diesel Fuel additives.
17NA073
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
19NA212
Service Bulletin/Repair Instructions
This diagnostic tip provides information to the tech to aid in performing a diagnostic test to verify if the camshaft alignment pin has been sheared away.
150844001J
Service Bulletin/Repair Instructions
This informational bulletin provides information for the GM of Canada OnStar Cellular Communication Upgrade to 3G/4G LTE for vehicles that may need an upgrade.
PIP5632B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIT3099S
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact PARTECH and/or the Techline Customer Support Center for additional support.
PI0592E
Service Bulletin/Repair Instructions
This preliminary information bulletin provides information om Service Programming System (SPS) Error Codes E4398, E4399, E4403, M4404, M4413, E4414, E4423, E4491 or E6961).
090604026R
Service Bulletin/Repair Instructions
This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
130089008B
Service Bulletin/Repair Instructions
This bulleting provides Wiring, Terminal and Connector Repair Information including how to determine the Service Part Number in eSI and how to locate the part(s) in the EPC.
000601026M
Service Bulletin/Repair Instructions
This informational bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage.
070601016F
Service Bulletin/Repair Instructions
This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
080730026F
Service Bulletin/Repair Instructions
This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
PIP4158H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have low oil pressure, no oil pressure, and/or engine noise. Technician will need to replace the oil pump, flush the oil cooler lines.
990089019R
Service Bulletin/Repair Instructions
This informational bulletin provides process information for the (GWM) and (WPC) parts return program.
DOR-K2S2K-10
Service Bulletin/Repair Instructions
This SKU is a Pitman Arm. The customer communication requested return of unsold inventory to inspect for the spline size. If the spline size is incorrect it will not have a tight fit with the mating component, and would lead to detectable play and/or noise when steering.
PI1344C
Service Bulletin/Repair Instructions
This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
PIT3099R
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
050604022Q
Service Bulletin/Repair Instructions
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
100845001G
Service Bulletin/Repair Instructions
This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
1308116001E
Service Bulletin/Repair Instructions
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
000601012J
Service Bulletin/Repair Instructions
This informational bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
090604026Q
Service Bulletin/Repair Instructions
This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
PIT3665H
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
19NA138
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to replace high pressure pipes if found the cause of the fuel concerns.
060847001O
Service Bulletin/Repair Instructions
This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
PIT5074L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
PIP5632A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
080730035D
Service Bulletin/Repair Instructions
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
PIT3665G
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
000310006N
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Tire Radial Force Variation (RFV).
PIP5640
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician to not remove the torque converter bolts and start the engine as this may cause damage to the torque converter of the crankshaft on vehicles equipped with an automatic transmission.
PIP5226C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
080089014E
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
PIC5260C
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
030729004L
Service Bulletin/Repair Instructions
This informational bulletin provides normal operating characteristics and diagnostic information on Manual transmissions.
1008110001H
Service Bulletin/Repair Instructions
This informational bulletin provides information on proper use of floor mats.
110089005N
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
030089006Q
Service Bulletin/Repair Instructions
This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
060089029O
Service Bulletin/Repair Instructions
This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
040089053G
Service Bulletin/Repair Instructions
This informational bulletin provides information for the dealer technician to gather as much information to help aid Engineers by completely filling out requested reports.
070849020P
Service Bulletin/Repair Instructions
This informational bulletin provides information for the IPC odometer programming method quick reference guide.
1008110001G
Service Bulletin/Repair Instructions
This informational bulletin provides information on proper use of floor mats.
PIP4902M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
100845001F
Service Bulletin/Repair Instructions
This bulletin provides information for electrical ground repairs using new replacement fasteners with "conductive finish".
090089002Q
Service Bulletin/Repair Instructions
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
PIP5632
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP4902L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
050604022P
Service Bulletin/Repair Instructions
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
PIP3119P
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on at low mileage. Technician may find Diagnostic Trouble Codes P0420 and or P0430 stored. Technician should be advised that the catalytic converter efficiency Diagnostic Trouble Codes P0420 and P0430 are disabled for the first hour of engine run time to allow break-in of the catalytic converter. Technician will need to use a Tech2 to check the verify engine run time on the Engine Hour Meter in the Instrument Panel Cluster Data Display/Data 1 List in the scan tool match. If the engine run time is less than one hour, the battery may have been disconnected, or another vehicle power loss event may have occurred, during vehicle manufacturing. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle. If the catalytic converter was replaced and the Diagnostic Trouble Codes set it may be a result of the engine run time restrictions no longer being in place since the vehicle is no longer new. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle.
120089002C
Service Bulletin/Repair Instructions
This informational bulletin provides the dealer with information on what to do when requesting a new key code for the customer.
PIP4021D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that a whine noise heard from the automatic transmission fluid pan hear with the the key on and engine off, or for up to one minute after the vehicle has been shut off should be deemed a normal characteristic.
PIP5540D
Service Bulletin/Repair Instructions
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
PIP5628
Service Bulletin/Repair Instructions
This Preliminary information communicates information that will need to be provided to TAC to aid in diagnosing if a vehicle comes in with misfire and DTC Codes P0300 - P0308 and/or P050D
PI0564K
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
090089016F
Service Bulletin/Repair Instructions
This warranty nonadministrative bulletin provides information on the proper use of the labor operation 0600014.
090089002P
Service Bulletin/Repair Instructions
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
010089010M
Service Bulletin/Repair Instructions
This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
080089014D
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
17NA346
Service Bulletin/Repair Instructions
This informational bulletin provides a listing of the parts availability for coax repair procedures and what is needed to complete some repairs.
15114A
Service Bulletin/Repair Instructions
Special Coverage. On some vehicles equipped with a 6.6L Duramax Diesel engine (RPO LML, LGH) the malfunction indicator lamp (MIL) may illuminate due to a condition with the glow plugs. When diagnosed, replacement of one of the engines glow plugs may be required. No drivability issues are generally associated with this issue, but harder starting in cold ambient temperatures may be noted. Dealers are to replace the affected glow plug. The repairs will be made at no charge to the customer.
17NA170
Service Bulletin/Repair Instructions
This informational bulletin explains the wheel Road Force balancers and what they can do for customer concerns.
100089005H
Service Bulletin/Repair Instructions
This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
040089015T
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on required operating procedures.
060089026O
Service Bulletin/Repair Instructions
This warranty bulletin provides labor operation numbers for customer concerns Not duplicated (CCND).
PIT5214D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts that are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
17NA066
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information for automatic transmission Oil Cooler Flush and flow test.
010842001L
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Replacement Guidelines.
080089014C
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on Use of Dealer Case Management (DCM) and Being Prepared for Contacting U.S. Technical Assistance (TAC).
PIT5058E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the operation and diagnostics of the Regular Production Option Code UJ1 brake warning pressure warning system. The technician can test the operation of the brake warning system. If the warning system does not function correctly, technician will need to inspect circuit 33 for a short to ground between X141 and the Instrument Panel Cluster terminal 14. Then inspect check circuit 33 for an open between X141 and the Instrument Panel Cluster terminal 14. Also technician should check male side of X141 circuit 33 with an ohm meter to ground and should be close to 0 ohms with engine off and key on. Start engine and circuit should go (OL) indicating that the flow switch opened. Then, turn the steering to the stop in pressure relief and verify that the circuit stays (OL) to check the operation of the pressure switch.
PIT5125D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles proper operation of the stop and/or turn signals. For vehicles without Regular Production Option Code V4D circuit 618 is for the left stop and turn signal and circuit 619 dark green is for the right stop and turn signal. For vehicles with Regular Production Option Code V4D circuit 618 yellow is for the left turn signal only. Circuit 619 dark green is for the right turn signal only and circuit 1320 light blue is for the stop lamps only.
080851003I
Service Bulletin/Repair Instructions
This informational bulletin advised the dealer to remove the protective film from the bumpers and how to clean/remove the adhesive.
PIP5540B
Service Bulletin/Repair Instructions
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
000310003X
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
060847001N
Service Bulletin/Repair Instructions
This bulletin explains the labor operation numbers used for submitting warranty claims for module reprogramming and not when replacing a module.
060850009J
Service Bulletin/Repair Instructions
This informational bulletin provides information for information on passenger presence sensing system (PPS or PSS) concerns with custom upholstery, accessory seat heaters or other comfort enhancing devices.
PIP4925B
Service Bulletin/Repair Instructions
This preliminary information document communicates a tip on the way to diagnose possible induction or exhaust air leaks using the evaporative emission cart smoke machine and ultrasonic leak detector tools.
PIC6107A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about being unable to receive OnStar ?Over The Air? updates. Technician will need to press the OnStar button and verify they have an active account and that the call connects with data and location.
PIT5353C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
PIT5410A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that will not change Heater-Vent-Air Conditioning modes, Defrost or RECIRC positions. Technician will need to gain access to the vacuum lines from Heater-Vent-Air Conditioning control and inspect for a pinch or a open in the line. Technician will repair the line for this concern.
PIP5601
Service Bulletin/Repair Instructions
This Preliminary information communicates
PIP4138R
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.
PIT5099D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
PIP5596
Service Bulletin/Repair Instructions
This Preliminary information communicates that when removing the fuel line jumper hose care should be taken to be sure the line is reinstalled correctly to avoid a no/low fuel pressure situation.
PIP4902K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIT4844H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with the installation of Cruise Control on a vehicle which did not come equipped with the option. Technician will need to contact the Techline Customer Support Center to determine if a calibration is available for the vehicle. If they are able to provide a calibration for the vehicle then order steering wheel with cruise control buttons, steering wheel sir coil, and steering column wiring harness.
PIP5163D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
PIP5370D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that some vehicle may have an “Exhaust Fluid Quality Poor” on the Driver Information Center or a diesel exhaust fluid warning lamp on or other exhaust fluid quality related concerns. Technician will inspect the diesel exhaust fluid for contamination. Technician should use Service Information for Contaminants in Diesel Exhaust Fluid Diagnosis and use special tool J26568 or EN50422 Diesel Exhaust Fluid Refractometer for fluid testing.
PIP5151F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel system is cleaned out test the fuel using the latest version of PIT3173.
PIC5260B
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician the steps on diagnosing the concern. Customer's sunroof operation intermittent, bind, noise, auto-reverse, and/or water leaks.
PIT5099C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
PIP5370C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that some vehicle may have an “Exhaust Fluid Quality Poor” on the Driver Information Center or a diesel exhaust fluid warning lamp on or other exhaust fluid quality related concerns. Technician will inspect the diesel exhaust fluid for contamination. Technician should use Service Information for Contaminants in Diesel Exhaust Fluid Diagnosis and use special tool J26568 or EN50422 Diesel Exhaust Fluid Refractometer for fluid testing.
PIP5151E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel system is cleaned out test the fuel using the latest version of PIT3173.
PIC5953D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
PIT5399A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about connectivity concerns when connecting an Apple device via USB cord. Technician should insure the customer is using an original equipment manufacturer Apple USB cable.
1208132001E
Service Bulletin/Repair Instructions
This informational bulletin explains to the dealer how to cover a possible customers mistake when a fuse has been blown.
18NA125
Service Bulletin/Repair Instructions
This informational bulletin provides information for engine oil life monitor operation calculation.
PI0754C
Service Bulletin/Repair Instructions
This PI bulletin provides information on Rear and Side Tempered Glass Spots (Quench Marks) and they are normal characteristic.
PIT5058D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the operation and diagnostics of the Regular Production Option Code UJ1 brake warning pressure warning system. The technician can test the operation of the brake warning system. If the warning system does not function correctly, technician will need to inspect circuit 33 for a short to ground between X141 and the Instrument Panel Cluster terminal 14. Then inspect check circuit 33 for an open between X141 and the Instrument Panel Cluster terminal 14. Also technician should check male side of X141 circuit 33 with an ohm meter to ground and should be close to 0 ohms with engine off and key on. Start engine and circuit should go (OL) indicating that the flow switch opened. Then, turn the steering to the stop in pressure relief and verify that the circuit stays (OL) to check the operation of the pressure switch.
080730035C
Service Bulletin/Repair Instructions
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
18NA102
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to repair a possible wiring harness repair if damaged by the parking bark, brake booster mount or brake pedal bolt.
PI0281G
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
PI0564J
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
130089010B
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on policies regarding a Product Assistance Claim (PAC) within the Courtesy Transportation Assistance Program.
060089031E
Service Bulletin/Repair Instructions
This informational bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
16NA218
Service Bulletin/Repair Instructions
Brake Hydrdroboost Leaking Power Steering Fluid, this may be due to overheating (thermal set of the hydro boost seals) from lack of/insufficient cooling by the loop cooler.
000089027J
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on properly eliminating unwanted odors in vehicles.
PIP4112S
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This concern may also be present while crusing at highway speeds and then an aggressive increase in throttle.This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to downshift.
110089002C
Service Bulletin/Repair Instructions
This informational bulletin was created to inform that any accessories that are installed from the GM factory will be covered under the standard vehicle warranty and dealer installed accessories will be covered for a full year (12 months).
030089006P
Service Bulletin/Repair Instructions
This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
PIT4376J
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician about key and theft information for Fleet Vehicles equipped with RPO 6E2 or 6E8 and converting to fleet mode. Technician will need to ensure fleet vehicles with RPO 6E2 or 6E8 should be checked to verify that the Theft Deterrent Module is in fleet mode prior to attempting to add keys.
17NA215
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to properly reprogram an onstar module to correct a condition of Red LED, No WiFi Operation, and/or Limited OnStar® Module Functionality After OnStar Module Replacement for Another Condition.
090604015C
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 09-06-04-015B (Vehicles Sitting Outside on Dealer Lots for Extended Periods with Hard Start/No Start Condition) to add the 2015-2018 model years.
090604026N
Service Bulletin/Repair Instructions
This informational bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2 9U.S. and Canada
110089005L
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
030603004W
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
PI0235K
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information to correct customer concerns of an exhaust leak or vibration/rattle noise at approximately 900 RPM, fuel smell/white smoke noted intermittently (usually after coming to a stop), and/or an oily substance noted on exhaust downpipe.
060601010D
Service Bulletin/Repair Instructions
This informational bulletin explains how the catalytic converters may need an inspection, cleaning or replacement if debris have entered the exhaust system.
150603001D
Service Bulletin/Repair Instructions
This informational bulletin provides information to diagnose batteries that have set for a long period of time and/or cold weather climates and testing those batteries.
PIP5226B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
PIP4138Q
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.
PIT3271H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIT3665F
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
PIP5540A
Service Bulletin/Repair Instructions
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components. That any of the listed DTC's may set with or without poor engine performance.
100864002D
Service Bulletin/Repair Instructions
This warranty bulletin explains how to determine if an outside mirrior was damaged by the customer and what is considered warranty and non-warranty.
PIP5168F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published “Engine Cranks But Does Not Run” diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.
050851001I
Service Bulletin/Repair Instructions
This information bulletin provides a procedure on how to remove the paint stain that may present itself under the shipping film.
PI0653E
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information on Damaged, Disassembled or Improperly Packaged Turbochargers Returned to Warranty Part Center.
17356
Service Bulletin/Repair Instructions
17356 - Emission Recall. Vehicles may experience an inoperative fuel pump leading to a no start or stall without warning. The fuel pump is to be replaced with a new design fuel pump.
PIP3343F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.
060089026N
Service Bulletin/Repair Instructions
This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
010310003P
Service Bulletin/Repair Instructions
This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
PIP5540
Service Bulletin/Repair Instructions
This Preliminary information communicates to the technician the need to inspect the induction system for potential icing issues in very cold ambient temperatures. To allow the ice to melt so that it can be drained from the related components.
050604022O
Service Bulletin/Repair Instructions
This informational bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles.
PIC5491K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
PIP4578B
Service Bulletin/Repair Instructions
This PI was superseded to update model years and add information concerning idle surge, reduced engine power mode, and/or DTCs P0068, P0121, P1516, P2101, P2119, and/or P2176 that may be experienced on high mileage vehicles. Please discard PIP4578.
PIT4844G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with the installation of Cruise Control on a vehicle which did not come equipped with the option. Technician will need to contact the Techline Customer Support Center to determine if a calibration is available for the vehicle. If they are able to provide a calibration for the vehicle then order steering wheel with cruise control buttons, steering wheel sir coil, and steering column wiring harness.
PIT5125C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles proper operation of the stop and/or turn signals. For vehicles without Regular Production Option Code V4D circuit 618 is for the left stop and turn signal and circuit 619 dark green is for the right stop and turn signal. For vehicles with Regular Production Option Code V4D circuit 618 yellow is for the left turn signal only. Circuit 619 dark green is for the right turn signal only and circuit 1320 light blue is for the stop lamps only.
040089015R
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on required operating procedures.
16NA075
Service Bulletin/Repair Instructions
This Bulletin provides procedures to correct a condition of Power Foldaway Mirror Glass Shake, Flutter at Normal Driving Speeds
000310003W
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
080730026E
Service Bulletin/Repair Instructions
This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
070089037L
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information for courtesy transportation and roadside assistance programs.
120089007A
Service Bulletin/Repair Instructions
This informational bulletin provides information on dealer responsibility for cargo carrying capacity labeling and the part numbers for the labels.
150603001C
Service Bulletin/Repair Instructions
This informational bulletin provides information to diagnose batteries that have set for a long period of time and/or cold weather climates and testing those batteries.
070089036I
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on enhancing field product reports with digital pictures.
010601011J
Service Bulletin/Repair Instructions
This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
16NA356
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to clear the codes and re-evaluate the XM radio channels to correct a condition of audio muting when listening to some Sirius XM channels but if they change channels they will find others that experience normal audio. This could be due to interference from transmitting sources outside of Sirius XM?s frequency range.
040730013D
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on automatic transmission shift and engine drivability concerns and/or MIL ON due to aftermarket oil bath air filter use.
16NA158
Service Bulletin/Repair Instructions
This bulletin describes the Dealer special tool loan program process.
PIT4730B
Service Bulletin/Repair Instructions
This Preliminary Information communication a diagnostic tip if the high speed lan bus is shorted to ground, which can cause the BCM to appear off line.
070604019F
Service Bulletin/Repair Instructions
This technical bulletin provides repair information for repairing the IP to body harness connector to correct a customer concern for intermittent Malfunction Indicator Lamp (MIL) illuminated with Reduced Engine Power displayed and DTC P2138 set.
PIT5596
Service Bulletin/Repair Instructions
This Preliminary information communicates an issue with the body harness shorting out off on the parking brake release cable causing various fuses to blow. We arecurrently looking into how and where this is happening in order to implement a corrective action plan.
PIC3100F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
PIC5492F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
PIT5353B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
PIT5206F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages “ Brake Pedal Override Feature “, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set. Technician will use this preliminary information to find the brake pedal position data parameters in the scan tool, and also to provide some additional diagnostic help. These issues may be caused by an incorrect brake pedal position sensor input to the engine control module. Technician will verify with the scan tool if the engine control module has the correct parameters for the brake pedal position sensor. If an engine control module brake pedal position sensor relearn is performed, the truck may be temporarily repaired until the intermittent wiring issue between the engine control module and brake pedal position sensor occurs again. On 2014 and newer trucks inspect and repair any damage to X115 and X119. On the 2014 and previous trucks inspect and repair any damage to X205.
070849020M
Service Bulletin/Repair Instructions
IPC Odometer Programming Method Quick Reference Guide
150089004B
Service Bulletin/Repair Instructions
Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
150089005A
Service Bulletin/Repair Instructions
Essential Tools that Include Consumable Parts (U.S. Only)
PIT5236K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical Assistance Center for further assistance. If the Firmware Over-the-Air version on the scan tool is lower than 6708 Dealer can order the part thought the Instrument Sales and Service website process.
030603004V
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
PIP4723C
Service Bulletin/Repair Instructions
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIT5074K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the use of J-35616-64B terminal test probe, replacement terminals, and terminated leads. The J-35616-64B is the latest test probe released for checking tension or probing the .64 series terminals. The test probe terminal has been released in the terminal repair kit (J-38125-620H) located in Lear Tray 7 part number 963716-2. There are 5 terminated leads in a package part number is 13505346, which can be ordered through your normal General Motors Customer Care and Aftersales parts channel.
PIP5151D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel system is cleaned out test the fuel using the latest version of PIT3173.
040601029I
Service Bulletin/Repair Instructions
This informational bulletin explains the importance of maintaining the vehicle.
100089005G
Service Bulletin/Repair Instructions
This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
000601012H
Service Bulletin/Repair Instructions
This informational bulletin advises the possible issues that may occur using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
PIT5389E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
100605002E
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared Message Displayed on DIC, DTC P2463 May Be Set.
PIP5370B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that some vehicle may have an “ Exhaust Fluid Quality Poor ” on the Driver Information Center or a diesel exhaust fluid warning lamp on or other exhaust fluid quality related concerns. Technician will inspect the diesel exhaust fluid for contamination. Technician should use Service Information for Contaminants in Diesel Exhaust Fluid Diagnosis and use special tool J26568 or EN50422 Diesel Exhaust Fluid Refractometer for fluid testing.
PIT3099Q
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts/kits. Technicians should refer to Service Information for information regarding most accessories. Technicians may also contact Partech and/or the Techline Customer Support Center for additional support.
030604017L
Service Bulletin/Repair Instructions
This Informational Bulletin provides information on availability of Diesel Fuel additives.
070601016D
Service Bulletin/Repair Instructions
This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
00-06-01-026J
Service Bulletin/Repair Instructions
This informational bulletin provides information on Intake Manifold Inspection/Replacement After Severe Internal Engine Damage.
17-NA-253
Service Bulletin/Repair Instructions
This informational bulletin provides information for specification with the engine oil for the Duramax 6.6L engine.
13-08-116-001C
Service Bulletin/Repair Instructions
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
PIP4912F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on vehicles that may have an intermittent high idle. If a technician has duplicated, or the customer description aligns with the speeds mentioned in the idle speed description tables, the idle speed should be considered a normal characteristic of current vehicle design.
99-08-51-001D
Service Bulletin/Repair Instructions
Thins informational bulletin provides information on Paint-less Dent Repair Process.
PIP5163C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
PIC5932B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
04-00-89-015Q
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on required operating procedures.
08-08-44-029H
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on warranty and policy exchange program for electronic products for U.S. and Canada dealers only.
PIP5151C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel system is cleaned out test the fuel using the latest version of PIT3173.
04-00-89-015P
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on required operating procedures.
17-NA-244
Service Bulletin/Repair Instructions
This informational bulletin provides information on Information on How to Prevent Inadvertent Vehicle Starting from Key Fob or OnStar Mobile Application and where to locate the information for future use.
08-08-51-003H
Service Bulletin/Repair Instructions
This informational bulletin advised the dealer to remove the protective film from the bumpers and how to clean/remove the adhesive.
03-03-10-007J
Service Bulletin/Repair Instructions
This informational bulletin provides information on the temporary tire flat spotting condition.
10-00-89-005F
Service Bulletin/Repair Instructions
This informational bulletin provides warranty policy information on revised wiring repair labor operations and required additional information.
PI0564I
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
PIC5611E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
PIC5588D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System.
PIT3099P
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
00-03-10-002K
Service Bulletin/Repair Instructions
This informational bulletin provides information on Chemical Staining, Pitting, Corrosion and/or Spotted Appearance of Chromed Aluminum Wheels.
05-00-89-029D
Service Bulletin/Repair Instructions
This informational bulletin provides information on General Motors Dealership Critical Equipment Requirements and Recommendations.
03-00-89-006N
Service Bulletin/Repair Instructions
This informational bulletin provides the dealership with how to prep a vehicle for delivery to the customer to aid in higher CSi scores.
04-00-89-015O
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on required operating procedures.
11-00-89-005K
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on Dealer Empowerment Labor Operations and Customer Enthusiasm.
17-NA-126
Service Bulletin/Repair Instructions
This informational bulletin provides information on Non-Design Intent Wheel Lock Nuts and Lug Nuts.
PI0281F
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers.
10-08-110-001F
Service Bulletin/Repair Instructions
This informational bulletin provides information on proper use of floor mats.
03-06-03-004U
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
99-04-20-002J
Service Bulletin/Repair Instructions
This informational bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operations.
PIP4112R
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear.
15-08-44-001I
Service Bulletin/Repair Instructions
This informational bulletin provides information for the GM of Canada OnStar Cellular Communication Upgrade to 3G/4G LTE for vehicles that may need an upgrade.
15-08-73-001A
Service Bulletin/Repair Instructions
This informational bulletin explains how to update the older Onstar module software to new software over GSA.
PI0671A
Service Bulletin/Repair Instructions
This preliminary information bulletin provides information for diagnosing a power steering fluid leak at the fluid reservoir.
17-NA-067
Service Bulletin/Repair Instructions
This informational bulletin provides information on On rare occasions, a security code input message with SPS error code E5659, M5304, and/or M5530 may be displayed in TIS2web when the technician is programming any module. If this concern is encountered, the technician should start by ensuring that the module being programmed is not a used module and that the VIN matches on VIN plate, TIS2web programming screen, and GDS2 module identification information screen.
06-08-47-001M
Service Bulletin/Repair Instructions
This information bulletin explains the labor operation numbers used for submitting warranty claims and how to setup, and reprogram modules.
16-NA-102
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to clean and repair the complete fuel system due to dirt getting into the fuel system causing the vehicle to have a hard or no start.
03-06-04-017K
Service Bulletin/Repair Instructions
This Informational Bulletin provides information on availability of Diesel Fuel additives.
10-00-89-006F
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers how to submit a product information report.
PIT5389C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
07-07-30-010D
Service Bulletin/Repair Instructions
This informational bulletin provides explanation on how to take snapshot data with a Tech 2 and upload it to a computer and where to email the info to.
PIC4935F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to help the dealership technicians perform a parasitic drain test for the OnStar module. When performing battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system.
PIP4723B
Service Bulletin/Repair Instructions
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
GCUS-3-848
Service Bulletin/Repair Instructions
44180 02 - Customer Satisfaction. Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
PIC3278G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the customer is having that is unwanted. The vehicle may receive an incoming call just like any other phone. Typically the customer will hear the phone ringing in the vehicle. This scenario also includes incoming Bluetooth calls. One type of unwanted call can be made if the key pad is faulty the OnStar system will try to make a blue button call for shorted voltage in the circuits. The OnStar module could have an internal fault and produce a ″Phone Unavailable″ audio message also it may have a Diagnostic Trouble Code U1500 or B1000. Refer to diagnostics for the Diagnostic Trouble Code making sure to follow any applicable Bulletins or Preliminary Information sheets. A “Ready” or “OnStar ready” audio message heard while driving. In some cases it has been found that the customer is inadvertently pressing the ″push to talk″ button on the steering wheel controls. On rare occasions, other issues in the steering column or Steering Wheel Control system may induce this concern.
PIC4801H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have an OnStar Turn-By-Turn Navigation the system that is inoperative. Technician verifies there are no Diagnostic Trouble Codes are present in the Antilock Braking System and Vehicle Communication Interface Module of the vehicle. If no Diagnostic Trouble Codes found call OnStar using the Blue button on the OnStar key pad and ask the advisor for a turn by turn route. Also make a OnStar personal call and a call into the vehicle. If normal diagnostics do not lead to a resolution technician will need to call General Motors Technical Assistance Center for further assistance.
PIC5959C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
PIC5588C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System.
02-00-89-002Q
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on when and how to submit a field product report.
01-03-10-003O
Service Bulletin/Repair Instructions
This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
PIP5029H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon, an upper engine and valve cleaning should be performed. Update added part numbers for the cleaner and model years.
PIP5338A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include “Vibration” “Business Associate Code” and the last 8 of the Vehicle Identification Number.
PIP4902J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIT3665E
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
08-03-10-006F
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure on how to clean and resurface wheel bead seats. for vehicles that have the condition of Tire Slowly Goes Flat, Tire Air Loss, Low Tire Pressure Warning Light Illuminated, Aluminum Wheel Bead Seat Corrosion (Clean and Resurface Wheel Bead Seat)
03-08-46-004S
Service Bulletin/Repair Instructions
This informational bulletin provides information on OnStar® VCIM is currently restricted parts. By working closely with our dealers and technicians, through the part restriction process, the General Motors team will gain a better understanding of any field concerns that may develop.
PIC5759B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio ?maximum number of phones are currently paired to the vehicle?. Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.
PIP3119N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on at low mileage. Technician may find Diagnostic Trouble Codes P0420 and or P0430 stored. Technician should be advised that the catalytic converter efficiency Diagnostic Trouble Codes P0420 and P0430 are disabled for the first hour of engine run time to allow break-in of the catalytic converter. Technician will need to use a Tech2 to check the verify engine run time on the Engine Hour Meter in the Instrument Panel Cluster Data Display/Data 1 List in the scan tool match. If the engine run time is less than one hour, the battery may have been disconnected, or another vehicle power loss event may have occurred, during vehicle manufacturing. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle. If the catalytic converter was replaced and the Diagnostic Trouble Codes set it may be a result of the engine run time restrictions no longer being in place since the vehicle is no longer new. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle.
PIT4733K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that customers may inquire as to the availability of OnStar bluetooth on their vehicle. Technician should be advised that Vehicles with Regular Production Option Code (UPF or UWE) offer Bluetooth through the OnStar system.
99-00-89-019O
Service Bulletin/Repair Instructions
This informational bulletin provides information for the (GWM) and (WPC) on parts return program.
PIT5236J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will need to ensure campaigns 14395 or 15086 are completed. Technician will need to use Global Diagnostic System 2 and gather information and contact General Motors Technical Assistance Center for further assistance.
07-08-49-020L
Service Bulletin/Repair Instructions
This informational bulletin provides information for the IPC odometer programming method quick reference guide.
PIP4138P
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.
PIP4828C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a rough idle and/or momentary lack of power after cold starting the engine and immediately placing the transmission in gear. Technician should follow published Service Information diagnostics first. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
GCUS-9-3314
Service Bulletin/Repair Instructions
16098 CWNFA Customer Advisory Letter. The letter is to reinforce the need to annually inspect the aft to aft tank flex line and the midship to aft tank flex line. Over time, a leak may occur by exposure to environmental elements and their corrosive effect on these lines. Additionally, if the lines are damaged due to hard contact with the park brake cable and/or external impact, a leak may occur. In such cases, the lines may show evidence of a jacket cut, nick, or rub-through. If this condition affects your vehicle, at fuel fill-up or start-up, you may notice a CNG odor or hear a hissing sound. If the line experiences an abrupt failure, you may hear a loud bang due to the rapid release of the gas. To check for this condition, please have a certified CNG technician inspect these lines in accordance with GM Service Information procedures for CNG leakage, corrosion and damage. This inspection should be performed annually as part of routine maintenance.
10-06-05-002D
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared Message Displayed on DIC, DTC P2463 May Be Set.
08-08-44-015H
Service Bulletin/Repair Instructions
This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
99-00-89-019N
Service Bulletin/Repair Instructions
This informational bulletin provides information for the (GWM) and (WPC) on parts return program.
PIC5492E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
PIP4912E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on vehicles that may have an intermittent high idle. If a technician has duplicated, or the customer description aligns with the speeds mentioned in the idle speed description tables, the idle speed should be considered a normal characteristic of current vehicle design.
01-03-10-003N
Service Bulletin/Repair Instructions
This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
05-03-08-002H
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
02-00-89-002P
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on when and how to submit a field product report.
05-00-89-055F
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information for GM dealer empowerment program and goodwill procedures.
PIT3099N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
02-06-01-027D
Service Bulletin/Repair Instructions
This informational bulletin provides information on higher then expected oil consumption.
08-09-41-002H
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to complete a terminal replacement or connector re connection to correct a condition of Diagnostic Information for Supplemental Inflatable Restraint (SIR) System, Intermittent AIR BAG Indicator/Lamp Illuminated with DTC(s) B0012, B0013, B0015, B0016, B0019, B0020, B0022, B0023, B0026, B0033, B0040, B0042 or B0044 Set (Inspect and Replace Connector Position Assurance (CPA) Retainer)
PIP5163B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about engine block that have a possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, an out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
11-00-89-004B
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on the change in product field action customer reimbursement procedure.
06-08-64-001D
Service Bulletin/Repair Instructions
This Informational bulletin describes warranty part reviews where door glass had chips or scratches.
01-03-10-003M
Service Bulletin/Repair Instructions
This bulletin contains information for the new tires that the vehicle is equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage). For vehicles within this warranty period, defective tires will be replaced on a pro rata adjustment basis according to the published distance-based schedule.
00-03-10-003V
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
PIT5389B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to contact General Motors Technical Assistance Center with the scan tool data from the OnStar system.
04-06-04-051E
Service Bulletin/Repair Instructions
This informational bulletin provides information for maintenance cleaning of the fuel injectors.
04-06-04-051D
Service Bulletin/Repair Instructions
This informational bulletin provides information for maintenance cleaning of the fuel injectors.
03-06-04-017J
Service Bulletin/Repair Instructions
This Informational Bulletin provides information on available Diesel Fuel Additives.
PIP5370A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that some vehicle may have an ?Exhaust Fluid Quality Poor? on the Driver Information Center or a diesel exhaust fluid warning lamp on or other exhaust fluid quality related concerns. Technician will inspect the diesel exhaust fluid for contamination. Technician should use Service Information for Contaminants in Diesel Exhaust Fluid Diagnosis and use special tool J26568 or EN50422 Diesel Exhaust Fluid Refractometer for fluid testing.
040604051D
Service Bulletin/Repair Instructions
This informational bulletin provides information for maintenance cleaning of the fuel injectors.
PIT5236H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version and the OnStar Customer Identifier and contact General Motors Technical Assistance Center for further assistance.
030604017J
Service Bulletin/Repair Instructions
This Bulletin has been Revised to add the 2017 Colorado, Cruze, Canyon, Chevrolet & GMC Light/Medium Duty Trucks. Please discard Corporate Bulletin Number 03-06-04-071I
030603004S
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on the requirements for battery testing and warranty replacements.
030603004T
Service Bulletin/Repair Instructions
Battery Testing and Warranty Replacement Requirements (North America ONLY)
040089015N
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on required operating procedures.
080730026D
Service Bulletin/Repair Instructions
This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
GCUS-9-2952
Service Bulletin/Repair Instructions
14652A-Special Coverage. On some vehicles a malfunction-indicator light (MIL) may illuminate due to an offset in the temperature sensor in the diesel-emission-reduction fluid (DEF) tank reservoir, increased tank-heater resistance, or reductant-system performance. If this condition occurs within the stated terms, dealer will replace the DEF tank reservoir and/or supply module pump.
050604022N
Service Bulletin/Repair Instructions
This informational bulletin provides information on the top tier fuels that are recommended in GM vehicles.
090089002N
Service Bulletin/Repair Instructions
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before sold (prepping) to the customer.
100844006D
Service Bulletin/Repair Instructions
This Informational Bulletin provides information for customers to report Missing or Inaccurate navigation Radio Map Disc information.
PIP5088E
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the parts restriction has ended on the 6.6L Duramax engine Regular Production Option Code (LML/LGH) part number 12638502. Dealer can now order parts through the normal Customer Care and Aftersales parts process.
00-03-10-003U
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on The tires supplied with a new vehicle are covered by General Motors against defects in material or workmanship under the Bumper-to-Bumper New Vehicle Limited Warranty.
05-08-44-024E
Service Bulletin/Repair Instructions
This informational bulletin provides information on return or reimbursement of customer owned CDs, DVDs or Navigation Discs .
07-00-89-037J
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information for courtesy transportation and roadside assistance programs.
08-08-44-029G
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on warranty and policy exchange program for electronic products for U.S. and Canada dealers only.
09-00-89-008C
Service Bulletin/Repair Instructions
This Warranty Admin bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
PIP5282A
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ABOUT THE CALCULATION AND OPERATION OF THE ENGINE OIL LIFE MONITOR. THE MONITOR CALCULATES THE PERCENT OF OIL LIFE REMAINING, BASED ON 3 PATHWAYS. THE FIRST PATHWAY FOR OIL LIFE CALCULATION IS ENGINE REVOLUTIONS. THE SECOND PATHWAY FOR OIL LIFE CALCULATION IS THE MILEAGE FORM THE LAST REST FOR ALL GENERAL MOTORS POWERTRAINS EXCEPT THE VOLT. THE THIRD PATHWAY FOR OIL LIFE CALCULATION IS THE AMOUNT OF TIME THE OIL IS IN THE ENGINE. THE VOLT USES A 2 YEAR TIMER INSTEAD OF 1 YEAR. IT ALSO USES THE ENGINE REVOLUTION COUNTER. IT DOES NOT USE THE MILEAGE PATHWAY TO COUNT DOWN.
09-00-89-016E
Service Bulletin/Repair Instructions
This warranty nonadministrative bulletin provides information on the proper use of the labor op 0600014.
11-00-89-005J
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on Goodwill Tools, Customer Enthusiasm, and Policy Guidelines.
PIC5453B
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN THAT GENERAL MOTORS AND GENERAL MOTORS OF CANADA COMPANY DO NOT SUPPORT CROSS BORDER SALES. THE GENERAL MOTORS OF CANADA CUSTOMER CARE CENTRE IS THE SOLE AUTHORIZED PROVIDER OF A CERTIFICATION CONFIRMATION LETTER WHICH HELPS OUR CUSTOMERS IDENTIFY IF THEIR VEHICLES MEETS THE REQUIRED USA REGULATORY STANDARDS NECESSARY FOR IMPORTATION INTO THE USA.
PIP5088D
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT THE 6.6L DURAMAX, REGULAR PRODUCTION OPTION CODE LML/LGH, ENGINE PART NUMBER 12638505 PARTS RESTRICTION HAS ENDED. DEALER CAN ORDER PARTS THROUGH THE REGULAR CUSTOMER CARE AND AFTERSALES PARTS PROCESS.
02-08-98-002G
Service Bulletin/Repair Instructions
This informational bulletin provides information on new tools used for the Hem Flanges and how to repair and seal the flanges when the repairs are done.
08-08-44-015G
Service Bulletin/Repair Instructions
This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
PIT5206E
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN WITH THE STEPS ON DIAGNOSING AND REPAIRING VEHICLES THAT MAY HAVE UNWANTED GRADE BRAKING, REDUCED ENGINE POWER WITH NO DRIVER INFORMATION CENTER MESSAGES BRAKE PEDAL OVERRIDE FEATURE , TRANSMISSION BUSY OR FREQUENT SHIFTING UP OR DOWN, AND DIAGNOSTIC TROUBLE CODES P057B, P057C, AND/OR P057D MAY OR MAY NOT BE SET. TECHNICIAN WILL USE THIS PRELIMINARY INFORMATION TO FIND THE BRAKE PEDAL POSITION DATA PARAMETERS IN THE SCAN TOOL, AND ALSO TO PROVIDE SOME ADDITIONAL DIAGNOSTIC HELP. THESE ISSUES MAY BE CAUSED BY AN INCORRECT BRAKE PEDAL POSITION SENSOR INPUT TO THE ENGINE CONTROL MODULE. TECHNICIAN WILL VERIFY WITH THE SCAN TOOL IF THE ENGINE CONTROL MODULE HAS THE CORRECT PARAMETERS FOR THE BRAKE PEDAL POSITION SENSOR. IF AN ENGINE CONTROL MODULE BRAKE PEDAL POSITION SENSOR RELEARN IS PERFORMED, THE TRUCK MAY BE TEMPORARILY REPAIRED UNTIL THE INTERMITTENT WIRING ISSUE BETWEEN THE ENGINE CONTROL MODULE AND BRAKE PEDAL POSITION SENSOR OCCURS AGAIN. ON 2014 AND NEWER TRUCKS INSPECT AND REPAIR ANY DAMAGE TO X115 AND X119. ON THE 2014 AND PREVIOUS TRUCKS INSPECT AND REPAIR ANY DAMAGE TO X205.
01-00-89-010L
Service Bulletin/Repair Instructions
This informational bulletin provides information on comebacks prevention information and using customer concern verification sheets (CCVS).
PI0653D
Service Bulletin/Repair Instructions
This preliminary informational bulletin was created to inform Service Agents or Dealers, they may be charged back for parts and labor due to the turbo-chargers are being returned to the Warranty Parts center damaged, improperly assembled or missing parts and advising to properly package the complete turbochargers. (New models and RPOs added)
PIT5125B
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES PROPER OPERATION OF THE STOP AND/OR TURN SIGNALS. FOR VEHICLES WITHOUT REGULAR PRODUCTION OPTION CODE V4D CIRCUIT 618 IS FOR THE LEFT STOP AND TURN SIGNAL AND CIRCUIT 619 DARK GREEN IS FOR THE RIGHT STOP AND TURN SIGNAL. FOR VEHICLES WITH REGULAR PRODUCTION OPTION CODE V4D CIRCUIT 618 YELLOW IS FOR THE LEFT TURN SIGNAL ONLY. CIRCUIT 619 DARK GREEN IS FOR THE RIGHT TURN SIGNAL ONLY AND CIRCUIT 1320 LIGHT BLUE IS FOR THE STOP LAMPS ONLY.
07-08-49-020K
Service Bulletin/Repair Instructions
This informational bulletin explains the programming method quick reference guide for the IPC Odometer.
01-03-10-003L
Service Bulletin/Repair Instructions
This GM of Canada New Vehicle Tire Warranty Program and GWM Transaction Submission Information Bulletin provides information for the new tires that the vehicle are equipped with and that they are covered by General Motors against defects in material or workmanship under the New Vehicle Warranty (Base Warranty Coverage) and for vehicles within this warranty period, the defective tires will be replaced on a pro rata adjustment basis. It also provides GWM Transaction information.
PI0639D
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to install adhesive back stock to the electrical connector for the steering wheel position sensor, to eleminate the excessive clearance/movement that causes the connector to loose contact and turns the Service Stabilitrak message on.
PIC5491J
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT HAVE AN ONSTAR SYSTEM THAT WILL NOT POWER UP. TECHNICIAN SHOULD TURN OFF THE IGNITION AND CANCEL RETAINED ACCESSORY POWER. AFTER THE VEHICLE HAS POWERED DOWN REMOVE POWER TO THE ONSTAR MODULE FOR FIVE MINUTES. AFTER THE POWER HAS BEEN REMOVED FOR FIVE MINUTES, IF THE ONSTAR SYSTEM IS WORKING RELEASE THE VEHICLE. IF THE ONSTAR SYSTEM IS STILL INOPERATIVE CONTINUE WITH PUBLISHED SERVICE INFORMATION DIAGNOSTICS.
PIP5029G
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT HAVE A MALFUNCTION INDICATOR LAMP ON OR ENGINE MISFIRE, ROUGH IDLE, EXTENDED CRANK, OR CRANK NO START IN SOME CASES. TECHNICIAN WILL NEED TO PERFORM PUBLISHED SERVICE INFORMATION DIAGNOSTICS. IF TECHNICIAN FINDS CARBON, AN UPPER ENGINE AND VALVE CLEANING SHOULD BE PERFORMED.
05-00-89-072D
Service Bulletin/Repair Instructions
This informational Bulletin provides Do's and Don'ts for maximizing gasoline engine fuel economy, other various tips and a list of websites for additional information.
16NA241
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO CHECK THE CYLINDERS FOR DAMAGED PISTONS AND DETERMINE IF THE USE OF AFTERMARKET CALIBRATIONS OR PERFORMANCE PARTS MAY BE THE CAUSE.
PIT5074J
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT THE USE OF J-35616-64B TERMINAL TEST PROBE, REPLACEMENT TERMINALS, AND TERMINATED LEADS. THE J-35616-64B IS THE LATEST TEST PROBE RELEASED FOR CHECKING TENSION OR PROBING THE .64 SERIES TERMINALS. THE TEST PROBE TERMINAL HAS BEEN RELEASED IN THE TERMINAL REPAIR KIT (J-38125-620H) LOCATED IN LEAR TRAY 7 PART NUMBER 963716-2. THERE ARE 5 TERMINATED LEADS IN A PACKAGE PART NUMBER IS 13505346, WHICH CAN BE ORDERED THROUGH YOUR NORMAL GENERAL MOTORS CUSTOMER CARE AND AFTERSALES PARTS CHANNEL
PI1394A
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES ADDITIONAL INFORMATION ON HOW TO INSTALL PISTONS AND SUGGEST WHAT TOOLS TO USE.
16NA260
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS.
GCUS-9-2682
Service Bulletin/Repair Instructions
17650 - Customer Advisory Letter. If this condition affects your vehicle you may noticed the CNG odor or hear a hissing sound. To check for this condition, please have a certified CNG technician inspect the manual shut-off valve in accordance with GM Service Information procedures for CNG leakage and damage. This inspection should be performed regularly as part of the updated maintenance schedule. If the inspection is performed at a GM dealership, and your vehicle is still covered under its 5 year/50,000 mile (80,000 km) Emissions Control Systems Warranty, replacement of the manual shut-off valve, if required, will be performed for you at no charge. Additionally, we are updating the maintenance schedule in the CNG supplement to your owner manual to include regular inspection of the CNG manual shut-off valve. The insert is an amendment to your supplement. Please keep this insert with your important vehicle documents for reference.
PI0388F
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES A PROCEDURE TO REPOSITION THE FRONT SEAT BELT LATCH PLATE FOR CONCERNS REGARDING THE SEAT BELT WEBBING OR LATCH PLATE COMING TWISTED.
PIP4786C
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE LOW OIL PRESSURE MESSAGE. TECHNICIAN MAY ALSO FIND A DIAGNOSTIC TROUBLE CODE P0521 IN THE ENGINE CONTROL MODULE. TECHNICIAN SHOULD FOLLOW ALL PUBLISHED SERVICE INFORMATION DIAGNOSIS. WHEN USING A SCAN TOOL IF THE OIL PRESSURE IS LOW BUT THE OIL PRESSURE AT THE OIL FILTER HOUSING IS CORRECT, TECHNICIAN SHOULD INSPECT THE VALVE LIFTER OIL FILTER FOR DEBRIS/SLUDGE THAT COULD BE RESTRICTING OIL FLOW TO THE OIL PRESSURE SENSOR. TECHNICIAN SHOULD REMOVE THE VALVE LIFTER OIL FILTER AND CLEAN IT. IF THE VALVE LIFTER OIL FILTER CANNOT BE CLEANED REPLACE IT.
030603004R
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON HOW TO TEST A BATTERY AND WHAT IS NEEDED TO WARRANTY A BATTERY.
16NA249
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN EXPLAINS A POSSIBLE NORMAL WHINING NOISE FROM THE BALANCE SHAFT CHAIN IF THE VEHICLE HAS LESS THAN 10,000 MILES ON IT.
070898001B
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON GM DOES NOT APPROVE THE USE OF CLIPPING TO REPAIR COLLISION DAMAGE TO VEHICLES. GM HAS NOT TESTED OR VALIDATED A CLIPPED VEHICLE REPAIR; THEREFORE, GM CANNOT ENDORSE THIS TYPE OF REPAIR OR CONFIRM THE CRASH PERFORMANCE DURING A SUBSEQUENT COLLISION.
000601012F
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION TO GM DEALERS ON THE CORRECT CLEANING METHODS WHEN CLEANING ENGINE GASKET SEALING SURFACES.
030604017I
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN EXPLAINS THE USE OF DIESEL FUEL ADDITIVES IN AN ENGINE, ARE NOT REQUIRED UNLESS THE CUSTOMER DESIRES ADDITIVES TO PREVENT FUEL CONCERNS DEPENDING ON FUEL OR TEMPERATURE RELATED CONDITIONS.
110849001S
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REMOVE THE TRANSPORT MODE ON MESSAGE DISPLAYED IN THE DIC DUE TO VEHICLES SHIPPED OVER LONG DISTANCES OUTSIDE THE U.S. AND CANADA.
000601026I
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETINS PROVIDES INFORMATION ON THE INTAKE MANIFOLD INSPECTION/REPLACEMENT AFTER SERVERE INTERNAL ENGINE DAMAGE.
GCUS-3-635
Service Bulletin/Repair Instructions
15827 - Customer Satisfaction. Vehicles, despite prior service may still have a condition in which the emission control system as designed will limit speed under certain conditions.
00-06-01-026H
Service Bulletin/Repair Instructions
This informational bulletin provides information on intake manifold inspection/replacement after severe internal engine damage.
16-NA-223
Service Bulletin/Repair Instructions
This informational bulletin provides information on installing the correct tires for vehicles with the condition of under hard acceleration at higher speeds, the traction control light will flash. Or, they may come in for ABS or general handling/braking concerns.
16-NA-218
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPLACE THE POWER BRAKE BOOSTER AND FLUID COOLER INLET AND OUTLET HOSE TO CORRECT A CONDITION OF BRAKE HYDROBOOSTER LEAKING POWER STEERING FLUID.
00-03-10-006M
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES GUIDANCE TO GM DEALERS WHEN USING GM APPROVED TIRE FORCE VARIATION MEASUREMENT EQUIPMENT.
15823 LETTER
Service Bulletin/Repair Instructions
15823 - CUSTOMER ADVISORY LETTER. THIS COMMUNICATION WAS TO INFORM DEALERS THAT A CUSTOMER MAILING WAS TAKING PLACE. THE LETTER INFORMS THE CUSTOMERS TO INSPECT FOR LEAKS OR DAMAGE TO THE FUEL FILLER NECK LINE AND/OR THE CARGO TANK HIGH PRESSURE FLEX LINES. TO ADDRESS THIS POTENTIAL CONDITION, CUSTOMERS ARE INSTRUCTED TO HAVE A CERTIFIED CNG TECHNICIAN INSPECT THE FUEL FILLER NECK LINE AND THE CARGO TANK HIGH PRESSURE FLEX LINE IN ACCORDANCE WITH GM SERVICE INFORMATION PROCEDURES. IN ADDITION, TO BE SURE THE CUSTOMERS VEHICLE DOES NOT HAVE THIS CONDITION, CUSTOMERS ARE ALSO INSTRUCTED TO CONTINUE INSPECTIONS ANNUALLY AS PART OF ROUTINE MAINTENANCE. GM HAS UPDATED THE MAINTENANCE SCHEDULE IN THE CNG VEHICLES OWNERS MANUAL SUPPLEMENT TO INCLUDE AN ANNUAL INSPECTION OF ALL CNG FLEX LINES.
16-NA-153
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON COMPRESSED NATURAL GAS (CNG) FUEL LINE INSPECTION AND REPLACEMENT PART IDENTIFICATION.
07-03-10-008E
Service Bulletin/Repair Instructions
THIS INFORMATIONAL PROVIDES INFORMATION ON SLIGHT OR MILD TIRE FEATHERING AND RECOMMENDED PRACTICES.
15-08-44-001H
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVODES INFORMATION ON THE GM OF CANADA ONSTAR CELLULAR COMMUNICATION UPGRADE.
PIP5094A
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT ,WHEN TESTING ANY CIRCUIT FOR OPEN OR RESISTANCE, IT IS IMPERATIVE THAT ALL RELATED TERMINAL PIN FIT AND TENSION BE CHECKED WHEN THE TEST STEPS REQUIRE DISCONNECTION OF THE CONNECTOR OR COMPONENT, PRIOR TO ANY COMPONENT REPLACEMENT. ALWAYS USE THE RECOMMENDED TERMINAL TEST TOOL DURING THESE TESTS.
08-08-51-003G
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON REMOVING THE PROTECTIVE FILM ON BUMPERS FOR SHIPPING PROTECTION.
10-08-110-001E
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON THE PROPER USE OF FLOOR MATS.
04-00-89-015M
Service Bulletin/Repair Instructions
THIS WARRANTY ADMINISTRATION BULLETIN PROVIDES POLICY INFORMATION ON USING GM SERVICE POLICIES AND PROCEDURE MANUAL THAT REPRESENT KEY GM REQUIREMENTS FOR SERVICE OPERATIONS.
09-06-04-026M
Service Bulletin/Repair Instructions
This informational bulletin provides information on identifying non-GM (aftermarket) engine calibrations for gasoline engines using Tech 2 or GDS 2.
GCUS-3-566
Service Bulletin/Repair Instructions
15801A - Customer Satisfaction Program. This bulletin is being revised to add a note at the beginning of the Service Information section. The 2016 model year GMC Sierra HD vehicle, and an increase in population has also been added. Vehicles equipped with Duramax Diesel Engine (RPO LGH or LML) and Ambulance Upfitter or Fire Truck Upfitter (RPO YF2 or ANM), may have a condition in which the emission control system as designed will limit speed under certain conditions. The EPA has approved General Motor?s request to remove the emission control system speed limitations on these emergency vehicles where applicable. Dealers are to reprogram the Engine Control Module (ECM) with new calibration for emergency vehicles, which will remove the emission control system speed limitations, and also provide an earlier warning for Diesel Particulate Filter (DPF) regeneration.
99-08-51-007G
Service Bulletin/Repair Instructions
This informational bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening or re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed.
PI0592D
Service Bulletin/Repair Instructions
This informational bulletin provides information on service programming system (SPS) errors.
GCUS-3-553
Service Bulletin/Repair Instructions
15801 - Customer Satisfaction Program. (2012 model year repair suspended) Vehicles equipped with Duramax Diesel Engine (RPO LGH or LML) and Ambulance Upfitter or Fire Truck Upfitter (RPO YF2 or ANM), may have a condition in which the emission control system as designed will limit speed under certain conditions. The EPA has approved General Motor?s request to remove the emission control system speed limitations on these emergency vehicles where applicable. Dealers are to reprogram the Engine Control Module (ECM) with new calibration for emergency vehicles, which will remove the emission control system speed limitations, and also provide an earlier warning for Diesel Particulate Filter (DPF) regeneration.
12-08-132-001D
Service Bulletin/Repair Instructions
This informational bulletin provides warranty information on accessory power outlet and trailer lighting fuse replacement.
PIT-3665-D
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT THE HYDRO-BOOST IS NOT SERVICEABLE AND WILL NEED TO BE REPLACED IF THE BRAKE PEDAL MOVES OR APPLIES ON ITS OWN AT A FULL TURN.
PIP-3140-G
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT A NOISE OR A VIBRATION IN THE VEHICLE THAT SEEMS TO BE ABNORMAL MAY NOT HAVE BEEN THERE WHEN THE VEHICLE WAS PURCHASED. TECHNICIAN SHOULD LOOK FOR NON - GENERAL MOTORS AFTERMARKET ACCESSORIES INSTALLED ON THE VEHICLE THAT CAN CAUSE THESE ISSUES.
SB-02-07-30-029Z
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDE INFORMATION ON THE PRODUCT QUALITY CENTER (PQC) ASSEMBLY REPLACEMENT PROCESS.
SB-16-NA-130
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON HOW TO INSPECT THE UPPER VALVE BODY TO DETERMINE THE CORRECT RPO USAGE TO CORRECT A CONCERN THAT AFTER INSTALLATION OF A REPLACEMENT UPPER VALVE BODY, THE TRANSMISSION MAY HAVE NO REVERSE AND NO 2ND GEAR DUE TO THE INSTALLATION OF THE INCORRECT UPPER VALVE BODY.
SB-16NA-131
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON VEHICLES DESIGNED TO OPERATE ON GASEOUS FUELS.
PIC-5374-D
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR THE CONCERN OF RECEIVING FREQUENT "OFF ROUTE" MESSAGES WHILE FOLLOWING TURN BY TURN (TBT) ROUTE NAVIGATION. THE TECHNICIAN IS PROVIDED INSTRUCTIONS FOR RESETTING THE VEHICLE COMMUNICATION INTERFACE MODULE FOR THIS CONCERN.
PIC5374D
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR THE CONCERN OF RECEIVING FREQUENT "OFF ROUTE" MESSAGES WHILE FOLLOWING TURN BY TURN (TBT) ROUTE NAVIGATION. THE TECHNICIAN IS PROVIDED INSTRUCTIONS FOR RESETTING THE VEHICLE COMMUNICATION INTERFACE MODULE FOR THIS CONCERN.
PIT5485B
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN IF UNABLE TO PLACE AN ONSTAR CALL IN THE IGNITION ON MODE AFTER THE ONSTAR CANADA UPGRADE, TO CONTACT THE GM TECHNICAL ASSISTANCE CENTER ONSTAR GROUP FOR FURTHER ASSISTANCE.
PI-1541-A
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION BULLETIN PROVIDES A PROCEDURE TO REPLACE BOTH FRONT SUSPENSION SPRINGS TO CORRECT A CUSTOMER CONCERN THAT THE FRONT SUSPENSION IS TOO LOW AND/OR THERE IS EXCESSIVE FRONT TIRE WEAR.
PIP5168E
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON THE STEPS TO DIAGNOSE THE CONCERN, AND THE STEPS TO REPAIR THE CONCERN OF THE VEHICLE CRANKS BUT DOES NOT START. THE TECHNICIAN IS TO INSPECT FOR A SHEARED CAM PIN IN THE ENGINE.
PIC4707E
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN TO DIAGNOSE THE CONCERN AND THE STEPS TO REPAIR THE CONCERN. THE VEHICLE'S XM TRAVEL LINK MAY BE INOPERTIVE.
PIC5088F
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR THE CONCERN. THE VEHICLE'S XM RADIO ONLY HAS XM PREVEIW CHANNELS.
SB-10-08-46-001C
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO CONTACT ONSTAR FOR HARD MUTE REQUEST TO CORRECT A CUSTOMER CONCERN WHEN THE RADIO IS ON, IT DOES NOT MUTE ENOUGH WHEN THE ONSTAR® TURN-BY-TURN NAVIGATION DIRECTIONS ARE ANNOUNCED DUE TO CUSTOMER IMPROPERLY SETTING THE RADIO VOLUME HIGH ENOUGH WHEN THE TURN-BY-TURN NAVIGATION MESSAGES ARE PLAYED.
SB-15-06-03-001B
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION THAT MAY BE USEFUL ON DIAGNOSING BATTERIES THAT HAVE SET FOR A LONG PERIOD OF TIME AND/OR SET IN COLD WEATHER CLIMATES AND TESTING THOSE BATTERIES.
PIC-4935-E
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO HELP THE DEALERSHIP TECHNICIANS PERFORM A PARASITIC DRAIN TEST FOR THE ONSTAR MODULE. WHEN PERFORMING BATTERY PARASITIC DRAIN TEST, THERE MAY BE SOME CONFUSION AS TO WHAT THE NORMAL POWER CONSUMPTION READING SHOULD BE FROM THE ONSTAR SYSTEM.
PIC4935E
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO HELP THE DEALERSHIP TECHNICIANS PERFORM A PARASITIC DRAIN TEST FOR THE ONSTAR MODULE. WHEN PERFORMING BATTERY PARASITIC DRAIN TEST, THERE MAY BE SOME CONFUSION AS TO WHAT THE NORMAL POWER CONSUMPTION READING SHOULD BE FROM THE ONSTAR SYSTEM.
PIT5389A
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON THE STEPS FOR DIAGNOSING THE CONCERN. THE VEHICLE MAY BE UNABLE TO CONNECT TO ONSTAR USING THE WHITE, BLUE OR RED ONSTAR BUTTONS.
SB-03-06-03-004Q
Service Bulletin/Repair Instructions
THIS WARRANTY ADMINISTRATION BULLETIN PROVIDE POLICY INFORMATION ON USING THE EL-50313 MIDTRONICS GR8 BATTERY TESTER/CHARGER FOR DIAGNOSING BATTERY REPLACEMENTS AND MAINTAINING BATTERIES ON NEW VEHICLES IN DEALER INVENTORY.
SB-06-08-47-001L
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES WARRANTY INFORMATION ON USING THE SERVICE PROGRAMMING SYSTEM (SPS) FOR PROGRAMMING CONTROL MODULES
SB-07-06-01-016C
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION INTERNAL ENGINE NOISE OR DAMAGE AFTER OIL FILTER REPLACEMENT
SB-16-NA-121
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPLACE THE AFFECTED CNG TANK VALVE TO CORRECT A CUSTOMER CONCERN OF CNG GAS VENTING, LEAKING, OR RELEASING DURING EXTREME COLD TEMPERATURES AND/OR DURING REFUELING DUE TO COLD TEMPERATURES ALONG WITH THE COOLING EFFECTS OF THE REFUELING PROCESS.
SB-16-NA-119
Service Bulletin/Repair Instructions
THIS WARRANTY ADMINISTRATION BULLETIN PROVIDES INFORMATION ON GMS POLICY ON PERFORMING GM COVERED VEHICLE SERVICES AND MAINTENANCE ON VEHICLES ORIGINATING/SOLD IN CANADA.
CSP-15801
Service Bulletin/Repair Instructions
15801 CUSTOMER SATISFACTION PROGRAM. VEHICLES EQUIPPED WITH THE DURAMAX DIESEL ENGINE OPTION AND THE AMBULANCE UPFITTER OR FIRE TRUCK UPFITTER OPTION MAY HAVE A CONDITION IN WHICH THE EMISSION CONTROL SYSTEM AS DESIGNED WILL LIMIT SPEED UNDER CERTAIN CONDITIONS. THE EPA HAS APPROVED GENERAL MOTORS REQUEST TO REMOVE THE EMISSION CONTROL SYSTEM SPEED LIMITATIONS ON THESE EMERGENCY VEHICLES WHERE APPLICABLE. DEALERS ARE TO REPROGRAM THE ENGINE CONTROL MODULE (ECM) WITH NEW CALIBRATION FOR EMERGENCY VEHICLES, WHICH WILL REMOVE THE EMISSION CONTROL SYSTEM SPEED LIMITATIONS, AND ALSO PROVIDE AN EARLIER WARNING FOR DIESEL PARTICULATE FILTER (DPF) REGENERATION.
PI-0754-B
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON A NORMAL CONDITION ON TEMPERED GLASS OF SPOTS SHOWING ON THE REAR AND SIDE WINDOWS WHEN THE VEHICLE IS IN THE SUNLIGHT.
SB-16-NA-117
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON THE PURPOSE OF MAGNETIC DRAIN PLUGS.
PIT5485A
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN, IF UNABLE TO PLACE AN ONSTAR CALL IN THE IGNITION ON MODE AFTER THE ONSTAR CANADA UPGRADE TO CONTACT THE GM TECHNICAL ASSISTANCE CENTER ONSTAR GROUP FOR FURTHER ASSISTANCE.
PI-0281-E
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES INFORMATION THAT MAY BE HELPFUL WHEN ADDRESSING UNDERBODY COMPONENT CORROSION WITH CUSTOMERS.
PIC-5260-A
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON DIAGNOSING THE CONCERN. VEHICLE'S SUNROOF OPERATION INTERMITTENT, BIND, NOISE, AUTO-REVERSE, AND/OR WATER LEAKS.
PIC5260A
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON DIAGNOSING THE CONCERN. VEHICLE'S SUNROOF OPERATION INTERMITTENT, BIND, NOISE, AUTO-REVERSE, AND/OR WATER LEAKS.
15801
Service Bulletin/Repair Instructions
Emergency Vehicle Reduced Power
SB-03-07-29-004K
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDE INFORMATION ON THE OPERATING CHARACTERISTICS OF A MANUAL TRANSMISSION.
SB-09-03-09-002B
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPLACE THE REAR SPRING SHACKLES TO CORRECT A CUSTOMER CONCERN OF A NOISE.
SB-16-NA-109
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO INSPECT THE STEERING GEAR FOR A NORMAL CONDITION OF GREASE OR SEALANT ON EXTERIOR CASE OF GEAR DUE TO THE MANUFACTURING PROCESS.
09-03-09-002B
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to replace the rear leaf spring shackle to correct a condition of a noise from the rear leaf sprin under acceleration and high loads due to the rear leaf spring shackle coming into contact with other parts.
PIT5236G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will check Global Warranty Management system for customer satisfaction program 15086 status. If the status of the customer satisfaction program 15086 was not completed follow the steps to get the Telematics Communication Interface Control Module replaced. If the status of customer satisfaction program 15086 is found completed contact General Motors Technical Assistance Center OnStar group for further assistance.
00-03-10-002J
Service Bulletin/Repair Instructions
This informational bulletin provides information on chemical staining, pitting, and corrosion on wheels and the proper cleaners to use to fix the conditions due to multiple causes.
PI0572C
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information on GM is implementing a new service strategy that uses a set of universal coaxial repair kits to service vehicles. This only applies to cable used for high frequency signals, such as cellular (OnStar®), satellite radio (XM) and GPS (navigation). The kits do NOT apply to the AM/FM cables.
PIP5371A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the multiple alternative gaseous fuel vehicles General Motors offers. Chevrolet Express and GMC Savana vans 2011 through 2016 offered a dedicated Compressed Natural Gas system. Refer to the latest version of PI0417 for more information. Chevrolet Express and GMC Savana 3500, 4500 Cutaway Vans 2012 through 2016 offered a dedicated Liquefied Petroleum Gas system. Refer to the latest version of PI0722 for more information. Chevrolet Silverado and GMC Sierra's 2013 through 2016 offered a combination of Compressed Natural Gas and Gasoline fuel systems. Refer to the latest version of PI0834 for more information. Chevrolet Impala's 2015 through 2016 offered a combination of Compressed Natural Gas and Gasoline fuel systems. Refer to the latest version of PI1330 for more information. The Compressed Natural Gas fuel system operates under high pressure up to 3600 psi. The Liquefied Petroleum Gas fuel system operates under high pressure up to 300 psi. Service and repair of this system should only be performed by a General Motors trained alternative fuels service technician with the proper knowledge and tools.
PI0360F
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information on GM Accessory Remote start not working with onstars remotelink phone applications
09-06-04-026L
Service Bulletin/Repair Instructions
This informational bulletin provides information on Identifying Non-GM (Aftermarket) Engine Calibrations for Gasoline Engines Using Tech 2® or GDS 2 (U.S. and Canada)
10-06-05-002C
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared Message Displayed on DIC, DTC P2463 May Be Set
PIT5206D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages ? Brake Pedal Override Feature ?, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set. Technician will use this preliminary information to find the brake pedal position data parameters in the scan tool, and also to provide some additional diagnostic help. These issues may be caused by an incorrect brake pedal position sensor input to the engine control module. Technician will verify with the scan tool if the engine control module has the correct parameters for the brake pedal position sensor. If an engine control module brake pedal position sensor relearn is performed, the truck may be temporarily repaired until the intermittent wiring issue between the engine control module and brake pedal position sensor occurs again. On 2014 and newer trucks inspect and repair any damage to X115 and X119. On the 2014 and previous trucks inspect and repair any damage to X205.
08-00-89-014B
Service Bulletin/Repair Instructions
This informational bulletin provides information on what is needed to be prepared for TAC, caller preparedness and checklists and contacting U.S. technical Assistance and the use of strategy based diagnostics
07-00-89-037I
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on Courtesy Transportation and Roadside Assistance Programs
16-NA-075
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to relearn the power folding mirriors and road test to correct a conditon of power fold away mirriors glass shakes or flutters at normal driving speeds
PIC6181
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician after the OnStar Canada upgrade the OnStar Vehicle Diagnostic Email report is inoperative. Please communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
08-07-30-026C
Service Bulletin/Repair Instructions
This informational bulletin provides information on vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak and that this is considered a normal conditon and no repairs are necessary
PIP5232C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the coil grounds ring terminal at the engine block for the bank with the concern and repair the wire.
16-NA-069
Service Bulletin/Repair Instructions
This informational bulletin provides information on If the radar does not see any vehicles, structures, or objects for 15-25 minutes of driving, the system may think its blocked and display the ?Side Object Detection System Disabled? message.
PIP5007F
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that vehicles with engine Regular Production Option Code LGH or LML may have an Exhaust Fluid Quality Poor message displayed on the Driver Information Center. Technician will need to complete the current Service Information diagnostic for any current Diagnostic Trouble Codes or symptoms found. If an Exhaust Fluid Quality Poor message is displayed with a specific Diagnostic Trouble Code, use that specific Service Information diagnostic, and repair the vehicle as necessary. If the dealer has found an Exhaust Fluid Quality Poor message with no Diagnostic Trouble Code, diagnose the condition using the current Service Information diagnosis for Diagnostic Trouble Code P20EE / P207F (P2BAD for 2012 and newer model years). After making repairs use the Service Information Document titled "Reductant Fluid Quality Test (With or without DTCs)" to evaluate and clear the Exhaust Fluid Quality Poor DIC message.
PIP5152C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the proper steps for filling the coolant system for vehicles with a diesel engine and rear heater systems. Dealer will need to review and use Service Information procedures for Cooling System Draining and Filling (Vac-N-Fill Diesel) after all cooling system repairs are made. When filling the cooling systems on vehicles that have been up-fitted with rear heaters, such as ambulances or buses, ensure that the rear heater is purged of all air.
03-00-89-006M
Service Bulletin/Repair Instructions
This informational bulletin provides information on New Vehicle Pre-Delivery Inspection (PDI) - Delivering Quality Vehicles and Generating Higher CSi Scores
03-06-03-004O
Service Bulletin/Repair Instructions
This informational bulletin provides information on Battery Testing and Warranty Replacement Requirements (North America ONLY)
06-00-89-029M
Service Bulletin/Repair Instructions
This informational bulletin provides information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability
09-00-89-002M
Service Bulletin/Repair Instructions
This informational bulletin provides information on how to properly maintain vehicles in the dealer inventory
04-00-89-015K
Service Bulletin/Repair Instructions
This warranty informational bulletin provides a list of all the required operating procedures and explains them out to what is acceptable and not.
PIP5276F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides steps the technician will uses to diagnose and repair vehicles that have low oil pressure after an oil change with the engine Regular Production Option Code L20, L77, L94, L96, L99, L9H, LC8, LC9, LH9, LMF, LMG, LY6, or LZ1. Vehicle may have Service Engine Soon lamp with Diagnostic Trouble Code P0521 or Low Oil Pressure message on the instrument panel. Dealer will need to determine if bulletin 10-06-01-008 was completed. If the bulletin was performed inspect the left rocker cover. Dealer will insure the left rocker can hold water without leaking. If leaks are found apply room temperature vulcanization silicone to the rocker cover if possible or replace the left rocker cover.
12-03-10-001C
Service Bulletin/Repair Instructions
This informational bulletin provides information on the proper mounting paste to apply to tires when mounting and balancing them to prevent conditions like Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel)
PIC5953A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
16-NA-055
Service Bulletin/Repair Instructions
This informational bulletin provides Information Regarding Servicing Components Located Near SIR Components and how to properly disable the SIR system for repairs at or near
02-08-42-001I
Service Bulletin/Repair Instructions
This informational bulletin provides an out line on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage and what should be considered warranty replacement and not
11-00-89-005I
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm (U.S. Only)
04-06-01-029H
Service Bulletin/Repair Instructions
This informational bulletin provides information on Unscheduled Supplemental Services (Including Flushing Services and Additives) and Proper Use of GM Simplified Maintenance Schedules (U.S. Only)
PIP5226A
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT FINDING NEEDLE BEARINGS DURING AN OIL CHANGE. TECHNICIAN WILL GAIN ACCESS TO THE ROLLER ROCKERS TO INSPECT THEM. ONLY REPLACE THE ROLLER ROCKER THAT IS MISSING NEEDLE BEARINGS. BE SURE TO CLEAN THE OIL DRAINS TO RETRIEVE THE NEEDLE BEARINGS. EACH ROLLER ROCKER HAS 66 BEARINGS.
08-08-44-015F
Service Bulletin/Repair Instructions
This informational bulletin provides Information on Inappropriate Warranty Claims Submitted for Damaged Radios and Instrument Panel Clusters (IPCs)
PIP5104B
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A COLD ENGINE TICK NOISE FOR 50 SECONDS AT START UP. TECHNICIAN DETERMINES IF THE TICK NOISE IS POSSIBLY COMING FROM THE EXHAUST MANIFOLD, AS THIS NOISE COULD EASILY BE MISTAKEN FOR AN ENGINE TICK NOISE. IF YOUR SI DIAGNOSIS DOES NOT ISOLATE THE CAUSE OF THIS CONCERN, THIS CONCERN SHOULD BE CONSIDERED A VEHICLE DESIGN CHARACTERISTIC OF THE ECM CALIBRATION AND NO ADDITIONAL REPAIRS SHOULD BE PERFORMED.
01-08-42-001K
Service Bulletin/Repair Instructions
This informational bulletin provides information on exterior lamp condinsation and replacement guidelines
PIT4720D
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN THAT AFTER REPLACING THE INSTRUMENT PANEL CLUSTER THE EXCHANGE CENTER IS UNABLE TO PROGRAM THE ACTUAL MILEAGE ON THE ODOMETER OR THE ACTUAL MILEAGE IS UNKNOWN. DEALER WILL NEED TO FOLLOW DEALER TO THE GENERAL MOTORS SERVICE POLICIES AND PROCEDURES MANUAL SECTION 5.2.4 ODOMETER SERVICING.
02-08-98-002F
Service Bulletin/Repair Instructions
This informational bulletin provides information on how to properly repair rust on the hem flange on doors for vehicles that have the condition of rust showing at hem flange
PIP4912D
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON VEHICLES THAT MAY HAVE AN INTERMITTENT HIGH IDLE. IF A TECHNICIAN HAS DUPLICATED, OR THE CUSTOMER DESCRIPTION ALIGNS WITH THE SPEEDS MENTIONED IN THE IDLE SPEED DESCRIPTION TABLES, THE IDLE SPEED SHOULD BE CONSIDERED A NORMAL CHARACTERISTIC OF CURRENT VEHICLE DESIGN.
PIP5370
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN THAT SOME VEHICLE MAY HAVE AN EXHAUST FLUID QUALITY POOR ON THE DRIVER INFORMATION CENTER OR A DIESEL EXHAUST FLUID WARNING LAMP ON OR OTHER EXHAUST FLUID QUALITY RELATED CONCERNS. TECHNICIAN WILL INSPECT THE DIESEL EXHAUST FLUID FOR CONTAMINATION. TECHNICIAN SHOULD USE SERVICE INFORMATION FOR CONTAMINANTS IN DIESEL EXHAUST FLUID DIAGNOSIS AND USE SPECIAL TOOL J26568 OR EN50422 DIESEL EXHAUST FLUID REFRACTOMETER FOR FLUID TESTING.
16-NA-025
Service Bulletin/Repair Instructions
This informational bulletin provides information on Behavior of Non-Upgraded OnStar Equipped Vehicles Operating in Canada after Decommissioning of 2G CDMA Cellular Networks
06-08-50-009I
Service Bulletin/Repair Instructions
This informational bulletin provides Information on Passenger Presence Sensing System (PPS or PSS) Concerns with Custom Upholstery, Accessory Seat Heaters or Other Comfort Enhancing Devices
03-08-46-004R
Service Bulletin/Repair Instructions
This informational bulletin provides information on Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules (VCIM) (GMNA Only)
PIP-5258
Service Bulletin/Repair Instructions
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE SERVICE ENGINE SOON AND A DIAGNOSTIC TROUBLE CODE P0011. IF THE TECHNICIAN HAS FOLLOWED SERVICE INFORMATION DIAGNOSTIC TROUBLE CODE FOR P0011AND THE ROOT CAUSE WAS NOT FOUND THE OIL PRESSURE AT THE OIL PRESSURE SENDER SHOULD BE CHECKED. ALSO THE NUMBER 2 CAM BEARING SHOULD BE INSPECTED.
PIP5258
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have Service Engine Soon and a Diagnostic Trouble Code P0011. If the technician has followed Service Information Diagnostic Trouble Code for P0011and the root cause was not found the oil pressure at the oil pressure sender should be checked. Also the number 2 cam bearing should be inspected.
PI0639C
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a procedure to apply dielectric grease and a piece of adhesive shim stock to the steering angle sensor connector to correct a condition of service stabilitak message displayed in DIC and DTC C0455 or C0710
06-06-01-010C
Service Bulletin/Repair Instructions
This informational bulletin provides information on close coupled converters and there affect on newly installed engines or engines during there break in period.
PIC5614A
Service Bulletin/Repair Instructions
Changing Turn-By-Turn Voice Response To Metric Or English Units
05-08-51-001H
Service Bulletin/Repair Instructions
This informational bulletin provides information on removing paint stains on the under side of protective shipping film
PIP4932D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles with Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0101. Technician should follow published Service Information diagnostics for any Diagnostic Trouble Codes that are set. If during diagnosis the tech has found that the Airflow Leak Equivalency Ratio or Induction System Leak Indication is above or below the specification the tech will have to carefully check for leaks in the air intake.
PI1164B
Service Bulletin/Repair Instructions
Some customers may comment on vehicle reduced engine power with a Service Engine message displayed. Upon inspection, a technician may find DTC P2263 set. This condition may be caused by snow or ice being ingested into the air cleaner housing and accumulating in the air cleaner element, resulting in restricted airflow into the engine.
PIT5353A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
PIP5016B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides additional information to the technician when replacing the Duramax Diesel head gasket. This is a supplement to procedure found in Service Information. The left and right cylinder head gaskets are not interchangeable and will block oil and coolant passages if installed incorrectly resulting in severe damage to the engine. Technician is not use any power sanding devices, wire brush or wheel as well as any chemical cleaning agents to clean the gasket surface. Leave the gaskets in the package until the surfaces are ready to install them. Do not set the gaskets on workbenches or tool boxes to avoid introduction of foreign debris. The cylinder head surface is not to be machined measure the head for warpage with a straight edge and feeler gauge replacing the head with warpage in excess of .1 millimeter. All M12 head bolts must be replaced however the M8 bolts can be reused. Install 2 head bolts secured at minimal torque to minimize the chance of introducing foreign material. Use a paint pen on the M12 bolts marking the head of each bolt indicating which of the 4 torque steps have been completed to prevent missing a step or doing a step twice.
PIP4864Q
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have "Exhaust Fluid Low", "Exhaust Fluid Empty - Refill Now", "Exhaust Fluid Range: XXX" or "Service Exhaust Fluid - See Owners Now" on the Driver Information Center. If the technician is working on 2010 and 2011 model years campaign 11001 has now been released. Other vehicles technician will need to check the Body Control Module and the scan tool to insure the latest calibration are installed in both. Then use the scan tool to check Reductant System Data in the Engine Control Module. Ensure that all three diesel exhaust fluid level sensors are active with the diesel exhaust fluid tank level showing 100%. If the tank level is below 100% add up to 2 gallons of diesel exhaust fluid. After adding the fluid, use a scan tool to reset the reductant fluid tank level. When the reductant level warning shows "none" the diesel exhaust fluid system reset and reprogram is complete.
PIT4943D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.
02-06-01-022P
Service Bulletin/Repair Instructions
Information on Diesel Engine Ticking Noise
06-00-89-031D
Service Bulletin/Repair Instructions
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
07-08-49-020J
Service Bulletin/Repair Instructions
IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.
08-06-04-003D
Service Bulletin/Repair Instructions
New Tool Availability EN-48974 EGR Cooler Pressure Tester Adapter Set to Diagnose Duramax® Diesel Engine EGR Cooler Engine Coolant Leaks into Combustion Chamber
10-06-04-013C
Service Bulletin/Repair Instructions
Information on Diesel Exhaust Fluid (DEF) Filling Instructions, Frozen Tank Status and General Information In operating temperatures of 15°F (−9°C) or less, customers may comment on an Exhaust Fluid Range message displaying on the DIC even though the DEF fluid has been filled. When the DEF is frozen, the level sensor cannot determine the fluid level in the tank. If this occurs the logic of the PCM will assume a default fluid level. The logic will use the calculated range based on DEF dosing history and the assumed fluid level. If there is a high learned dosing rate and the fluid has not thawed to where the pins of the level sensor can function, there is a possibility the Exhaust Fluid Range message can set with the range from approximately 1609 km (1000 mi) to less than 482 km (300 mi), even though the tank is known to have fluid or be full. This is an operating characteristic of the system. However to increase or eliminate the range message, once the range drops below 482 km (300 mi), the DEF tank should be refilled. This should allow refill detection to occur and turn off the range indicator. The operator must be sure not to overfill the DEF tank using the instructions provided in this bulletin or in the owners manual. When in frozen tank status, refill detections are not allowed until the warning strategy reaches the point at which the distance remaining is less than 482 km (300 mi). The refill detection is dependent on the DEF thawing enough that the level sensor pins can be read. A fully frozen tank can take almost an hour to detect a refill, after the vehicle is started. This condition should not be confused with the situation described in PIP4864: Low Or Speed Limited Diesel Exhaust Fluid Message (DEF) Will Not Reset.
10-06-05-002B
Service Bulletin/Repair Instructions
CLEAN EXHAUST FILTER SEE OWNERS MANUAL NOW or CLEANING EXHAUST FILTER KEEP DRIVING UNTIL MESSAGE IS CLEARED Displayed on DIC, DTC P2463 May Be Set
12-06-04-002E
Service Bulletin/Repair Instructions
Information on Exhaust Fluid Range, Exhaust Fluid Quality Poor, Service Exhaust Fluid System or Service Emission System Driver Information Center Messages
120604002E
Service Bulletin/Repair Instructions
Information on Exhaust Fluid Range, Exhaust Fluid Quality Poor, Service Exhaust Fluid System or Service Emission System Driver Information Center Messages
15-NA-079
Service Bulletin/Repair Instructions
OnStar Voice Fallback Number Update
15-NA-069
Service Bulletin/Repair Instructions
This informational bulletin provides information for technicians on the reuse of fasteners and the proper reading of torque specifications.
PIP5232B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
00-03-10-006L
Service Bulletin/Repair Instructions
This informational bulletin provides additional information to the technician on how to check for Tire Radial Force Variations and the difference between balancing a flange and flangeless rim.
PIT5214B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
PIC3100E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle's odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor's wheel or a dynamometer.
15-08-44-001F
Service Bulletin/Repair Instructions
This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
15-08-44-001G
Service Bulletin/Repair Instructions
This informational bulletin provides information on a GM of Canada OnStar cellular communication upgrade.
10-00-89-005E
Service Bulletin/Repair Instructions
This warranty administration bulletin adds the 2016 model year to a communication which provides dealership personnel revised wiring repair labor operations and required additional information.
PI1344B
Service Bulletin/Repair Instructions
This preliminary informational bulletin adds the 2016 model year to diagnostic tips and repair information to correct a customer concern of reduced acceleration at low speed and/or transmission slipping from a launch, DTC P0751 set.
02-07-30-029Y
Service Bulletin/Repair Instructions
This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
01-06-01-011I
Service Bulletin/Repair Instructions
This informational bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
08-08-44-029F
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on an updated warranty and policy exchange program for electronic products through GM authorized Electronic Service Centers (ESCs) (U.S. and Canada).
PI1541
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information to replace the front springs with a new designed spring to correct a customer concern of front suspension too low, excessive tire wear, and/or unable to perform alignment.
PI0799A
Service Bulletin/Repair Instructions
This preliminary informational bulletin adds the 2014 - 2016 model years to cleaning information to correct a customer concern of seeing a white film/residue on the IP pad and/or door trim panels.
PIT5058C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the operation and diagnostics of the Regular Production Option Code UJ1 brake warning pressure warning system. The technician can test the operation of the brake warning system. If the warning system does not function correctly, technician will need to inspect circuit 33 for a short to ground between X141 and the Instrument Panel Cluster terminal 14. Then inspect check circuit 33 for an open between X141 and the Instrument Panel Cluster terminal 14. Also technician should check male side of X141 circuit 33 with an ohm meter to ground and should be close to 0 ohms with engine off and key on. Start engine and circuit should go (OL) indicating that the flow switch opened. Then, turn the steering to the stop in pressure relief and verify that the circuit stays (OL) to check the operation of the pressure switch.
PIC5953B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
15-NA-030
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on the use of non-GM approved battery chargers and booster packs.
PIP5338
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vibration complaints that are one of the most challenging complaints to accurately diagnose and repair. Technician will need to use Pico Oscilloscope Diagnostic Kit to effectively diagnosis vehicles. Technician should drive the vehicle will using the Pico Oscilloscope to record data. After the data is recorded it should be reviewed to determine the root cause of the concern. If a repair attempt made the concern better but not eliminated or had no affect at all, and are requesting assistance from General Motors Technical Assistance Center record another Pico file and save it to the computer. After the new Pico Oscilloscope data has been saved email the data to General Motors Technical Assistance Center in the subject line include ?Vibration? ?Business Associate Code? and the last 8 of the Vehicle Identification Number.
06-00-89-031C
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on proper engine and automatic transmission/transaxle identification.
15-06-03-001A
Service Bulletin/Repair Instructions
This informational bulletin provides information that may be useful in diagnosing/testing batteries that have set for a long period of time and/or set in cold weather climates to correct a customer concern of symptoms that include, but not limited to, a slow or no crank condition that may be caused by a discharged battery.
PIP3504D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a hard start when the engine is hot. If the fuel found in the vehicle has an American Petroleum Institute specific gravity reading of 39 - 44, and the fuel sample you used for comparison has an American Petroleum Institute specific gravity reading of 30 - 39, drain the fuel system and refill with a known good diesel fuel and retest.
PIP4404F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician vehicles with a slight rough idle. Technician should compare the concern with a like vehicle. If the concern is worse than a like vehicle, technician should follow published Service Information diagnosis and repair as necessary.
08-08-44-029E
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on an updated warranty and policy exchange program for electronic products through GM authorized Electronic Service Centers (ESCs) (U.S. and Canada).
05-03-07-009H
Service Bulletin/Repair Instructions
This warranty administration bulletin provides retail, wholesale and fleet personnel with General Motors recommendations for customer concerns related to wheel alignment.
06-06-01-007I
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on identifying Duramax Diesel overpower engine breakdown or non-function due to aftermarket power-up devices vs. non overpower engine non-function of pistons, cylinders, valve train components, and DTC P003A or P111D set.
PI0652B
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides technicians with repair information on removing seized exhaust temperature sensors.
PI1214B
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides service personnel with a guide to determine which SI documents and scan tool parameters to reference when encountering an: Exhaust Fluid Quality Poor message displayed, and a Reductant Fluid Quality Test status that will Pass, Time Out, Fail or Interrupt and other DEF messages that maybe observed.
15-NA-013
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
15NA013
Service Bulletin/Repair Instructions
Exterior Lighting Inoperative - Incorrect Upfitter BCM Connections
PI0653C
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides dealership personnel with policies and procedures regarding damaged, disassembled or improperly packaged turbochargers returned to Warranty Part Center.
PIT5468
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about a connectivity concern with Bluetooth after phone software is updated or after any vehicle updates for the radio or Human Machine Interface has taken place. Technician should delete all Bluetooth pairings and then reboot the Bluetooth device and the vehicle. After the vehicle and radio is booted back up repair the Bluetooth device.
PIT5464
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the incoming caller ID may no longer be available or displayed after the Canada OnStar upgrade. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
PIT5465
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Turn By Turn directions may no longer be displayed after the Canada OnStar upgrade. Dealer should communicate to the customer that we apologize for this inconvenience and that General Motors is working on a solution for this concern.
PIP5325
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician to help determine if the vehicle is equipped with factory or aftermarket Compressed Natural Gas, Liquefied Petroleum Gas, or Bi-Fuel Systems. Technician will check for the Vehicle Emission Control Information Label. By using the engine Regular Production Option Code as well as the Vehicle Emission Control Information Label, technician can confirm the vehicle has a factory installed alternative fuel system or who the manufacturer is of the aftermarket fuel system.
GCUS-9-898
Service Bulletin/Repair Instructions
15457 - Special Coverage. Some 2010-2015 Chevrolet Express and GMC Savana vehicles and 2011-2015 Chevrolet Silverado HD and GMC Sierra HD vehicles that are equipped with 6.6L Duramax Diesel engines (RPO LML or LGH) may contain a leak in the seal between the engine-exhaust down pipe and the engine-exhaust pipe. If a leak is present, the intermittent regeneration of the diesel-particulate filter may cause small amounts of diesel fuel to leak from the vehicle. It may also cause diesel-fuel vapor and engine exhaust to enter the passenger cabin. Dealers are to inspect the turbocharger exhaust pipe and the downpipe connection and implement service kit if necessary.
PIP4112Q
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear.
PI0564H
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only).
PIP5088C
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the 6.6L Duramax Diesel Engine Part number 12638502 has been placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact the General Motors Product Quality Center for further assistance.
15-00-89-005
Service Bulletin/Repair Instructions
This warranty administration bulletin provides dealership personnel with policy and procedure requirements for essential tools that include consumable parts (U.S. Only).
PI0235J
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information to correct customer concerns of an exhaust leak or vibration/rattle noise at approximately 900 RPM, fuel smell/white smoke noted intermittently (usually after coming to a stop), and/or an oily substance noted on exhaust downpipe.
PIP5276E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on or a low oil pressure indicated after an oil change. Technician may find Diagnostic Trouble Code P0521. Inspect the engine for any oil leaks and repair if need. Technician should change the engine oil and replace the oil filter using a PF48e type filter.
10-08-110-001D
Service Bulletin/Repair Instructions
This informational bulletin provides information on the proper use of GM floor mats.
00-06-01-026G
Service Bulletin/Repair Instructions
This informational bulletin provides information to technicians regarding intake manifold inspection/replacement after severe internal engine damage.
PIP5152B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the proper steps for filling the coolant system for vehicles with a diesel engine and rear heater systems. Dealer will need to review and use Service Information procedures for Cooling System Draining and Filling (Vac-N-Fill Diesel) after all cooling system repairs are made. When filling the cooling systems on vehicles that have been up-fitted with rear heaters, such as ambulances or buses, ensure that the rear heater is purged of all air.
07-00-89-037H
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on courtesy transportation and roadside assistance programs.
09-09-40-001C
Service Bulletin/Repair Instructions
This informational bulletin provides information to advise dealers about seat belt buckles not operating and/or seat belt warning light illumination, as well as difficulty latching and unlatching the buckle or the buckle release button sticking.
PIT5236F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will check Global Warranty Management system for customer satisfaction program 15086 status. If the status of the customer satisfaction program 15086 was not completed follow the steps to get the Telematics Communication Interface Control Module replaced. If the status of customer satisfaction program 15086 is found completed contact General Motors Technical Assistance Center OnStar group for further assistance.
PIP-5088-C
Service Bulletin/Repair Instructions
GMC/CHEVROLET: TO ASSIST ENGINEERING PRODUCT FEEDBACK, PARTS FOR DURAMAX DIESEL ENGINE, HAS BEEN PLACED ON RESTRICTIONS, BY PRODUCT QUALITY CENTER (PQC). MODEL 2010-16 DURAMAX. *PE
PIP-5276-E
Service Bulletin/Repair Instructions
CADILLAC/CHEVROLET/GMC: ON SOME VEHICLES AND/OR TRUCKS, INSTRUMENT CLUSTER WILL ILLUMINATE, AFTER AN OIL CHANGE, INDICATING LOW OIL PRESSURE AND/OR SES LAMP WILL ILLUMINATE. MODEL 2007-13 CANYON, SIERRA, SAVANA, YUKON, CTS-V, ESCALADE, AVALANCHE, CAMARO SS, COLORADO, CORVETTE, EXPRESS, SILVERADO, SUBURBAN, TAHOE. *PE
09-00-89-002L
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on properly maintaining vehicles in dealer inventory.
PIC5932A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
PIT5236E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical Assistance Center for further assistance. If the Firmware Over-the-Air version on the scan tool is lower than 6708 Dealer can order the part thought the Instrument Sales and Service website process.
08-06-04-006M
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with Information for Identifying non-GM ECM calibration use and Power-Up hardware detection in Duramax? diesel engines ? Photograph Tech 2® Calibration IDs, Calibration Verification Numbers (CVNs) and Transmission Data Screen.
09-06-04-026K
Service Bulletin/Repair Instructions
This informational bulletin supplies infomation for identifying non-GM (Aftermarket) engine calibrations for gasoline engines using Tech 2® or GDS 2 (U.S. and Canada).
99-01-39-004G
Service Bulletin/Repair Instructions
This technical bulletin provides repair information for the correction of a customer concern of short duration musty odors emitted from the HVAC system at vehicle start-up in hot, humid conditions.
PIP5110C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of additional information while diagnosing a diagnostic trouble code P0420. Check for a possible leak in the exhaust system behind the bank one number 2 oxygen sensor. If a leak is found or there is an aftermarket utility bed or trailer hitch installed. Check for a minimum clearance of 1.5 to 2 inches of the exhaust system. Install a new clamp and torque it to 40.5 foot pounds.
03-06-03-003E
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on ACDelco® replacement battery warranty procedures.
03-07-29-004J
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with information to assist in identifying operating characteristics of manual transmissions that repair attempts will not change.
03-00-89-006L
Service Bulletin/Repair Instructions
This informational bulletin provides dealership personnel with information on new vehicle Pre-Delivery Inspection (PDI) process and to encourage delivering quality vehicles and generating higher CSi scores.
PI0564G
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides frame coating repair information to correct a customer concern of wax coating on frame peeling, metal shows corrosion/rusting (U.S. and Canada Only)
PIP5110B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with additional information while diagnosing a diagnostic trouble code P0420. Check for a possible leak in the exhaust system behind the bank one number 2 oxygen sensor. If a leak is found or there is an aftermarket utility bed or trailer hitch installed. Check for a minimum clearance of 1.5 to 2 inches of the exhaust system. Install a new clamp and torque it to 40.5 foot pounds.
01-08-51-003E
Service Bulletin/Repair Instructions
This informational bulletin provides recommendations and product information for application of anti-corrosion materials
05-06-04-022M
Service Bulletin/Repair Instructions
This informational bulletin provides information on TOP TIER Detergent Gasoline and available retail brands.
06-00-89-029K
Service Bulletin/Repair Instructions
This informational bulletin provides dealership personnel with information on interior cleaning of Instrument Panel (IP), hard or plastic surfaces, seats, carpet, leather, vinyl, fabric cleaner, stain remover, restorer and product availability.
PIC5491G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
PIT5442
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of an engine power reduced message on the driver information center after performing the Canada Onstar® 4G upgrade. If the concern is present park the vehicle outside and call General Motors Technical Assistance Center.
15114
Service Bulletin/Repair Instructions
15114 - SPECIAL COVERAGE. ON SOME 2010-2012 MODEL YEAR CHEVROLET SILVERADO HD AND GMC SIERRA HD OR 2011-2012 CHEVROLET EXPRESS AND GMC SIERRA HD VEHICLES EQUIPPED WITH A 6.6L DURAMAX DIESEL ENGINE (RPO LML, LGH) THE MALFUNCTION INDICATOR LAMP (MIL) MAY ILLUMINATE DUE TO A CONDITION WITH THE GLOW PLUGS. WHEN DIAGNOSED, REPLACEMENT OF ONE OF THE ENGINES GLOW PLUGS MAY BE REQUIRED. NO DRIVABILITY ISSUES ARE GENERALLY ASSOCIATED WITH THIS ISSUE, BUT HARDER STARTING IN COLD AMBIENT TEMPERATURES MAY BE NOTED. DEALERS ARE TO REPLACE THE AFFECTED GLOW PLUG.
03-06-03-004N
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel regarding warranty codes generated by EL-50313 Midtronics GR8 Battery Tester/Charger required for claim processing on labor operations 4041510, 4041520 and 250 mile/400 km labor operation restriction (North America ONLY).
14652
Service Bulletin/Repair Instructions
14652 - SPECIAL COVERAGE. ON SOME 2010-2012 MODEL YEAR CHEVROLET EXPRESS AND GMC SAVANA VEHICLES AND 2011-2012 MODEL YEAR CHEVROLET SILVERADO HD AND GMC SIERRA HD VEHICLES THAT ARE EQUIPPED WITH A 6.6L DIESEL ENGINE (LML/LGH), A MALFUNCTION-INDICATOR LIGHT (MIL) MAY ILLUMINATE DUE TO AN OFFSET IN THE TEMPERATURE SENSOR IN THE DIESEL-EMISSION-REDUCTION FLUID (DEF) TANK RESERVOIR, INCREASED TANK-HEATER RESISTANCE, OR REDUCTANT-SYSTEM PERFORMANCE. DEALERS ARE TO REPLACE THE DEF TANK RESERVOIR AND/OR SUPPLY MODULE PUMP.
SC-14652
Service Bulletin/Repair Instructions
CHEVROLET/GMC: TSB CONTAINS AN OWNER'S NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. SOME TRUCKS WILL EXPERIENCE AN INCREASED HEATER RESISTANCE OR REDUCTANT SYSTEM PERFORMANCE DUE TO AN OFFSET IN TEMPERATURE SENSOR OF DIESEL EMISSION REDUCTION FLUID TANK RESERVOIR, CAUSING THE MALFUNCTION INDICATOR LAMP TO ILLUMINATE. MODEL 2010-12 EXPRESS, SAVANA, 2011-12 SILVERADO HD, SIERRA HD. *PE
SC-15114
Service Bulletin/Repair Instructions
CHEVROLET/GMC: TSB CONTAINS AN OWNER'S NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. SOME TRUCKS WILL EXPERIENCE ENGINE GLOW PLUGS ISSUES CAUSING MALFUNCTION INDICATOR LAMP (MIL) TO ILLUMINATE AND NEED TO REPLACE ENGINE GLOW PLUGS. MODEL 2010-12 EXPRESS, SAVANA, 2011-12 SIERRA HD, SILVERADO HD. *PE
15111
Service Bulletin/Repair Instructions
15111 - SPECIAL COVERAGE. ON SOME 2012 MODEL YEAR CHEVROLET SILVERADO, EXPRESS, COLORADO AND GMC SIERRA, SAVANA, AND CANYON VEHICLES EQUIPPED WITH A 4.3L, 2.9L, OR 3.7L ENGINE (RPO LU3, LLV, OR LLR) AND A 4L60E AUTOMATIC TRANSMISSION (RPO M30), THE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED AND THE TRANSMISSION MAY EXHIBIT A HARSH SHIFT FROM FIRST GEAR TO SECOND GEAR. THIS CONDITION MAY ALSO SET DIAGNOSTIC TROUBLE CODE (DTC) P0741 IN THE TRANSMISSION CONTROL MODULE (TCM). IF DTC P0741 IS FOUND, DEALERS ARE TO REPLACE THE AUTOMATIC TRANSMISSION WIRING HARNESS.
07-06-04-019E
Service Bulletin/Repair Instructions
This technical bulletin provides repair information for repairing the IP to body harness connector to correct a customer concern for intermittent Malfunction Indicator Lamp (MIL) illuminated with Reduced Engine Power displayed and DTC P2138 set.
02-00-89-002O
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers/technicians on when and how to submit a Field Product Report (FPR) (U.S. Dealers Only).
PI1080B
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information on installing a reinforcement to correct a customer concern that a crack has developed on the spring mount area of the front shock absorber mounting bracket.
PIC6107
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about being unable to receive OnStar ?Over The Air? updates. Technician will need to press the OnStar button and verify they have an active account and that the call connects with data and location.
PIP4864P
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have "Exhaust Fluid Low", "Exhaust Fluid Empty - Refill Now", "Exhaust Fluid Range: XXX" or "Service Exhaust Fluid - See Owners Now" on the Driver Information Center. If the technician is working on 2010 and 2011 model years campaign 11001 has now been released. Other vehicles technician will need to check the Body Control Module and the scan tool to insure the latest calibration are installed in both. Then use the scan tool to check Reductant System Data in the Engine Control Module. Ensure that all three diesel exhaust fluid level sensors are active with the diesel exhaust fluid tank level showing 100%. If the tank level is below 100% add up to 2 gallons of diesel exhaust fluid. After adding the fluid, use a scan tool to reset the reductant fluid tank level. When the reductant level warning shows "none" the diesel exhaust fluid system reset and reprogram is complete.
PIP5258A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician may find a Diagnostic Trouble Code P0011. If the technician has followed all published Service Information diagnosis and has not come to a conclusion, technician should check the oil pressure at the oil pressure sender. Then the number two cam bearing should be inspected.
PIT5214A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
14653
Service Bulletin/Repair Instructions
14653 - SPECIAL COVERAGE. SOME 2010-2014 MODEL YEAR CHEVROLET EXPRESS, 2011-2014 MODEL YEAR CHEVROLET SILVERADO HD, 2010-2014 MODEL YEAR GMC SAVANA AND 2011-2014 MODEL YEAR GMC SIERRA HD VEHICLES EQUIPPED WITH A 6.6L ENGINE (RPO LML OR LGH), MAY HAVE A CONDITION WHERE THE INDIRECT FUEL INJECTOR CAN BECOME STUCK IN THE CLOSED POSITION OR CAN HAVE LOW FLOW. THIS CONDITION COULD RESULT IN THE ILLUMINATION OF THE MALFUNCTION INDICATOR LIGHT (MIL). DEALERS ARE TO REPLACE THE INDIRECT FUEL INJECTOR AS NECESSARY WITH AN IMPROVED SERVICE PART.
PIT5410
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that will not change Heater-Vent-Air Conditioning modes, Defrost or RECIRC positions. Technician will need to gain access to the vacuum lines from Heater-Vent-Air Conditioning control and inspect for a pinch or a open in the line. Technician will repair the line for this concern.
99-00-89-019M
Service Bulletin/Repair Instructions
This informational bulletin provides dealership personnel with Global Warranty Management (GWM), Warranty Parts Center (WPC), and Parts Return Program information.
15-08-44-001C
Service Bulletin/Repair Instructions
This informational bulletin provides information on a GM of Canada OnStar® cellular communication upgrade.
PIP4949E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a hard start or a no start. Technician may find Diagnostic Trouble Code DTCs P0087, P0088, P0191 or P128E. Technician will need to follow all Service Information diagnose for the Diagnostic Trouble Code. If the current Service Information diagnostic has led to Fuel Injection Pump replacement, Fuel Pressure Regulator 1 must be inspected for magnetic metal debris. If there is a questionable amount of magnetic debris found on Pressure Regulator 1 remove the Fuel Rail Pressure Sensor and/or Fuel Pressure Regulator 2 to inspect for magnetic metal debris. If technician will need to replace all of the parts listed under the latest version of PIP4949 found in the Service Forms section of Global Connect if debris is found. Clean and flush all fuel chassis lines, filter pipes, and other engine mounted fuel system pipes not replaced. Also the fuel filter housing must be cleaned with a new fuel filter installed. Then the fuel tank and fuel sender must be cleaned and flushed.
PIP5276D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on or a low oil pressure indicated after an oil change. Technician may find Diagnostic Trouble Code P0521. If Diagnostic Trouble Code P0521 setting in cold weather and it has a PF48E oil filter, change the filter to a UPF48R if one is available.
PIT5384A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have the OnStar wireless fidelity inoperative. Technician will need to contact General Motors Technical Assistance Center with a scan tool connect to the vehicle for further assistance.
PIT5236D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will use Global Diagnostic System 2 to review the Firmware Over-the-Air version. If the Firmware Over-the-Air version on the scan tool equals 6708 the technician will need to contact General Motors Technical Assistance Center for further assistance. If the Firmware Over-the-Air version on the scan tool is lower than 6708 Dealer can order the part thought the Instrument Sales and Service website process.
09-00-89-002K
Service Bulletin/Repair Instructions
This informational bulletin provides information to dealership personnel on properly maintaining vehicles in dealer inventory.
PIP5276C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on or a low oil pressure indicated after an oil change. Technician may find Diagnostic Trouble Code P0521. If Diagnostic Trouble Code P0521 setting in cold weather and it has a PF48E oil filter, change the filter to a PF48 if one is available. If there is no availability of oil filter PF48 use oil filter UPF48R.
SC-14653
Service Bulletin/Repair Instructions
GMC/CHEVROLET: TSB CONTAINS AN OWNER'S NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. SOME TRUCKS WILL EXPERIENCE ILLUMINATION OF MALFUNCTION INDICATOR LIGHT (MIL) DUE TO INDIRECT FUEL INJECTOR WILL HAVE LOW FLOW OR BE STUCK IN CLOSED POSITION. MODEL 2010-14 EXPRESS, SAVANA, 2011-14 SIERRA HD, SILVERADO HD. *PE
SC-15111
Service Bulletin/Repair Instructions
GMC/CHEVROLET: TSB CONTAINS AN OWNER'S NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. WHEN SHIFTING FROM FIRST GEAR TO SECOND GEAR, HARSH SHIFTING IS EXPERIENCE AND MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE. MODEL 2012 SILVERADO, EXPRESS, COLORADO, SIERRA, SAVANA, CANYON. *PE
05-06-04-035E
Service Bulletin/Repair Instructions
This informational bulletin provides dealership personnel with information on flexible fuel vehicles (FFVs) and the usage of E85 fuel in GM vehicles.
15-00-89-004A
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
00-06-01-026F
Service Bulletin/Repair Instructions
This informational bulletin provides information to technicians regarding intake manifold inspection/replacement after severe internal engine damage.
10-08-42-001E
Service Bulletin/Repair Instructions
This technical bulletin provides repair information for low beam headlamp bulb diagnosis/replacement to correct a customer concern that the low beam headlamp is inoperative.
15-08-44-001A
Service Bulletin/Repair Instructions
This informational bulletin provides information on a GM of Canada OnStar® cellular communication upgrade.
15-08-44-001B
Service Bulletin/Repair Instructions
This informational bulletin provides information on a GM of Canada OnStar® cellular communication upgrade.
PIP5016A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides additional information to the technician when replacing the Duramax Diesel head gasket. This is a supplement to procedure found in Service Information. The left and right cylinder head gaskets are not interchangeable and will block oil and coolant passages if installed incorrectly resulting in severe damage to the engine. Technician is not use any power sanding devices, wire brush or wheel as well as any chemical cleaning agents to clean the gasket surface. Leave the gaskets in the package until the surfaces are ready to install them. Do not set the gaskets on workbenches or tool boxes to avoid introduction of foreign debris. The cylinder head surface is not to be machined measure the head for warpage with a straight edge and feeler gauge replacing the head with warpage in excess of .1 millimeter. All M12 head bolts must be replaced however the M8 bolts can be reused. Install 2 head bolts secured at minimal torque to minimize the chance of introducing foreign material. Use a paint pen on the M12 bolts marking the head of each bolt indicating which of the 4 torque steps have been completed to prevent missing a step or doing a step twice.
02-06-01-027C
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with information to help educate them on the many various combinations of engines, interfacing equipment and vehicle usage which may cause higher than expected oil consumption.
PI1477
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information to correct a customer concern of front end noise while driving over bumps or during low speed turns.
12050C
Service Bulletin/Repair Instructions
12050C - CUSTOMER SATISFACTION PROGRAM (REVISED EXPIRATION DATE, EXTENDED TO 4/30/16). CERTAIN 2011-2012 MODEL YEAR CHEVROLET EXPRESS AND GMC SAVANA VEHICLES, AND CHEVROLET SILVERADO AND SUBURBAN, AND GMC SIERRA AND YUKON XL 2500 SERIES VEHICLES, ALL EQUIPPED WITH A 10.5" REAR AXLE, MAY HAVE A CONDITION IN WHICH THE REAR AXLE RIGHT-HAND SIDE BEARING ADJUSTER CLIP AND BOLT MAY COME LOOSE WITHIN THE REAR AXLE. IF THIS OCCURS, A GRINDING NOISE AND A VEHICLE VIBRATION WOULD BE NOTICEABLE WHEN THE VEHICLE IS IN MOTION. IF THE ADJUSTOR OR BOLT PUNCTURES THE DIFFERENTIAL COVER PAN, A FLUID LEAK COULD DEVELOP. IF ENOUGH FLUID WERE TO LEAK OUT, THE DRIVER MAY HEAR INCREASING NOISE, ADDITIONAL VEHICLE VIBRATION, AND SMELL BURNT AXLE LUBRICANT. IF THE DRIVER IGNORES THESE WARNINGS AND CONTINUES TO DRIVE THE VEHICLE, A SLOW LOSS OF VEHICLE MOTION COULD OCCUR. DEALERS ARE TO INSPECT AND, IF NECESSARY, REPAIR THE REAR AXLE.
PB-12050
Service Bulletin/Repair Instructions
CHEVROLET/GMC: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON SOME 2011-2012 TRUCKS, A GRINDING NOISE AND VIBRATION WOULD BE NOTICEABLE DUE TO THE REAR AXLE RIGHT HAND SIDE BEARING ADJUSTER CLIP AND BOLT MAY COME LOOSE INSIDE OF REAR AXLE. *PE UPDATED 9/6/12. *PE UPDATED 7/18/14. *PE UPDATED 11/6/15. *PE
PI-1467
Service Bulletin/Repair Instructions
CHEVROLET/GMC: ON INSTRUMENT PANEL, IN SOME VEHICLES, ONCE TOW/HAUL MODE IS SELECTED, WOULD ILLUMINATE BUT SHIFT CHARACTERISTICS OF TRANSMISSION FAILS TO CHANGE. MODEL 2012-14 EXPRESS, SAVANA. *PE
PI0091B
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information to correct a customer concern of Iitermittently key will not rotate in door or ignition lock cylinder.
PI1467
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information for transmission control module reprogramming to correct a customer concern of Tow/Haul mode inoperative.
02-08-42-001H
Service Bulletin/Repair Instructions
This informational bulletin provides information to assist dealership personnel with the identification of vehicle headlamp, tail lamp, license lamp or fog/driving lamp damage that are not considered warrantable.
15-00-89-004
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered seepage.
PIT5028B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle starts and stalls on the first initial start after the replacement of the Theft Deterrent Module. Technician will need to use the scan tool to check Manufactures Enable Counter. If the number is anything other than zero the Manufactures Enable Counter will need to be reset. To reset the Manufactures Enable Counter counter, the ignition key can be cycled the number equal to the Manufactures Enable Counter counter.
PIT5399
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about connectivity concerns when connecting an Apple device via USB cord. Technician should insure the customer is using an original equipment manufacturer Apple USB cable.
12-06-04-002D
Service Bulletin/Repair Instructions
This informational bulletin provides information to technicians on exhaust fluid range, exhaust fluid quality poor, service exhaust fluid system or Service Emission System Driver Information Center (DIC) messages.
PIC4310L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
PIP5282
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician about the calculation and operation of the engine oil life monitor. The monitor calculates the percent of oil life remaining, based on 3 pathways. The first pathway for oil life calculation is engine revolutions. The second pathway for oil life calculation is the mileage form the last rest for all General Motors powertrains except the Volt. The third pathway for oil life calculation is the amount of time the oil is in the engine. The Volt uses a 2 year timer instead of 1 year. It also uses the engine revolution counter. It does not use the mileage pathway to count down.
14634
Service Bulletin/Repair Instructions
14634 -SPECIAL COVERAGE (MESSAGE ONLY - POPULATION CHANGE). PLEASE BE ADVISED 2010-2014 CHEVROLET EXPRESS AND GMC SAVANA VEHICLES EQUIPPED WITH A 6.6L DIESEL ENGINE (LMM/LGH), 5.3L FLEX-FUEL ENGINE (LMF), OR A 6.0L LIQUID PROPANE/COMPRESSED NATURAL GAS ENGINE (LC8) ARE NOT INCLUDED IN THIS PROGRAM BUT WERE INADVERTENTLY INCLUDED.
05-08-46-009D
Service Bulletin/Repair Instructions
This informational bulletin adds the 2014 and 2015 model years to information of a language change for OnStar System (U.S. and Canada only).
12-07-30-001E
Service Bulletin/Repair Instructions
This informational bulletin provides information on the Product Quality Center (PQC) assembly replacement process for Service Agents not required to contact PQC prior to assembly replacement.
13-08-116-001B
Service Bulletin/Repair Instructions
The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
00-05-22-002O
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with a brake lathe calibration procedure.
14301
Service Bulletin/Repair Instructions
14301 - SPECIAL COVERAGE. ON SOME VEHICLES, EQUIPPED WITH A HINGED LEFT SIDE REAR DOOR (E26), INADEQUATE CLEARANCE MAY RESULT IN ABRASION TO ONE OR BOTH REAR BRAKE LINES. THIS COULD CAUSE BRAKE FLUID LOSS RESULTING IN DECREASED BRAKE LINE PRESSURE, INCREASED BRAKE PEDAL TRAVEL AND INCREASED STOPPING DISTANCE. ALERTS ANNOUNCING THIS POTENTIAL CONDITION ARE: A SUDDEN INCREASE IN BRAKE PEDAL TRAVEL; ILLUMINATION OF BRAKES LIGHT AND STABILITRAK SYMBOL; DISPLAY OF SERVICE BRAKE, SERVICE STABILITRAK, AND SERVICE TRACTION CONTROL MESSAGES IN THE DRIVER INFORMATION CENTER (DIC); AND/OR CHIMES WILL BE HEARD. DEALERS ARE TO REPLACE REAR BRAKE LINES WITH PRE-FORMED LINES BASED ON VEHICLE CONTENT.
PIT5236C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may OnStar inoperative and Navigation/GPS/Compass issues. Technician may find Diagnostic Trouble Codes B101D sym 3C and or F0. Technician will gather data using a scan tool and contact General Motors Technical Assistance Center for further assistance. After approval technician will replace the OnStar module.
PIP5276B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on during a cold start in temperatures below 0 degrees Fahrenheit. Technician will find Diagnostic Trouble Code P0521. Technician will check the oil filter part number. If the part number is PF48E change the oil filter to a PF48. If a PF48 is not available then install a new UPF48R.
13-00-89-008A
Service Bulletin/Repair Instructions
This informational bulletin communicates GM wiring repair strategy information.
PI1440
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides technicians with diagnostic tips for a customer concern of odor emanating from HVAC system.
PIP5133D
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the part restriction has ended on the 6.6L Duramax Diesel Engine Fuel Injection Pump Part numbers 12645102, 12658095 and 12661059.
04-00-89-015J
Service Bulletin/Repair Instructions
This warranty administration bulletin communicates GM required operating procedures (U.S. only) for service operations.
09-00-89-016D
Service Bulletin/Repair Instructions
This warranty administration bulletin provides retail and wholesale service personnel with the policies and the warranty claims submission procedures that support Labor Operation 0600014 ? Suspected Tampering or Vehicle Modifications.
PIP5276A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on during a cold start in temperatures below 0 degrees Fahrenheit. Technician will find Diagnostic Trouble Code P0521. Technician will check the oil filter part number. If the part number is PF48E change the oil filter to a PF48. If a PF48 is not available then install a new PF48E.
12-06-01-008B
Service Bulletin/Repair Instructions
This informational bulletin provides dealership personnel information on unscheduled supplemental services (including flushing services and additives) and proper use of GM simplified maintenance schedules (Canada only).
15-00-90-001
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with diagnostic tips for preventing oil leaks after changing oil and filter.
PIP5276
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on during a cold start in temperatures below 0 degrees Fahrenheit. Technician will find Diagnostic Trouble Code P0521. Technician will check the oil filter part number. If the part number is PF48E change the oil filter to a PF48.
02-07-30-029X
Service Bulletin/Repair Instructions
This informational bulletin provides information on the PQC assembly replacement process - for dealers required to contact PQC prior to replacing an assembly (U.S. and Canada only).
08-08-45-004D
Service Bulletin/Repair Instructions
This informational bulletin provides information for installing a diode to solenoid/relay to suppress voltage spikes in conjuction with installation of electrical aftermarket accessories-battery, ignition and ground feeds-(do not splice into wiring harness).
PIP5007E
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that vehicles with engine Regular Production Option Code LGH or LML may have an Exhaust Fluid Quality Poor message displayed on the Driver Information Center. Technician will need to complete the current Service Information diagnostic for any current Diagnostic Trouble Codes or symptoms found. If an Exhaust Fluid Quality Poor message is displayed with a specific Diagnostic Trouble Code, use that specific Service Information diagnostic, and repair the vehicle as necessary. If the dealer has found an Exhaust Fluid Quality Poor message with no Diagnostic Trouble Code, diagnose the condition using the current Service Information diagnosis for Diagnostic Trouble Code P20EE / P207F (P2BAD for 2012 and newer model years). After making repairs use the Service Information Document titled "Reductant Fluid Quality Test (With or without Diagnostic Trouble Codess)" to evaluate and clear the Exhaust Fluid Quality Poor Driver Information Center message.
15-08-44-001
Service Bulletin/Repair Instructions
This informational bulletin provides information on a GM of Canada OnStar® cellular communication upgrade.
15-08-73-001
Service Bulletin/Repair Instructions
This informational bulletin provides information on communication with OnStar® module after Canadian cellular upgrade.
SC-14634
Service Bulletin/Repair Instructions
GMC/CHEVROLET: TSB CONTAINS AN OWNER NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. THE FUEL PUMP HAS AN OPEN CIRCUIT AND/OR OVERHEATING CONDITION, IN SOME VEHICLES, WHEREBY ITS INOPERATIVE BECAUSE OF FUEL PUMP MODULE BATTERY TERMINAL. MODEL 2010-14 EXPRESS, SAVANA. *PE UPDATED 10/7/15 *CN
15-00-89-003
Service Bulletin/Repair Instructions
This informational bulletin provides information on dealer reimbursement procedures for Customer Assistance Center (CAC) Tier 1 and Tier 2 empowerment tools: diagnostic fee, short term rental, and up-front towing (U.S. only).
05-06-04-060A
Service Bulletin/Repair Instructions
This informational bulletin communicates Information to technicians on control module Diagnostic Trouble Code(s) (DTC)(s) P0601, P0602, P0603, P0604, P0606, P062F, P06F3, P1621 which can be shared in multiple modules.
PIP5168D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published ?Engine Cranks But Does Not Run? diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.
PIT5264C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The customer has 3 options while traveling through the United Sates. First if the vehicle is equipped with a navigation radio they can request a "Destination Download" to the vehicle. Second if the customer uses the OnStar RemoteLink app they can send the directions to the vehicle. The third option would be to have the vehicle loaded with a "500 phone number" The customer will no longer be able to use their Hands Free Calling minutes when the new 500 phone number is loaded. If a customer chooses to restore Hands Free Calling in the future a new phone number will be assigned to the vehicle; previous phone numbers are not available.
08-03-10-004B
Service Bulletin/Repair Instructions
This informational bulletin communicates comprehensive instructions to GM Dealers and authorized GM Accessory Distributor/Installers as to the proper methods for mounting, balancing, and installing accessory wheels and tires.
05-00-89-055E
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information to clarify proper transaction administration of GM Dealer Empowerment Program and Goodwill Cases.
15-08-42-001
Service Bulletin/Repair Instructions
This informational bulletin communicates GM's position on exterior lighting components ?tinted or smoked? by an outside vendor.
PI1018A
Service Bulletin/Repair Instructions
This preliminary informational bulletin adds the 2015 model year to repair information on correcting a customer concern of poor, limited, reduced Remote Keyless Entry (RKE) or Remote Vehicle Start (RVS) range.
05-03-10-020F
Service Bulletin/Repair Instructions
This informational bulletin communicates GM's position on use of nitrogen gas in tires.
PI1404
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a diagnostic tip for low line pressure or pressure regulator valve stuck after transmission service pump cover replacement.
G-209333
Service Bulletin/Repair Instructions
14745 - SPECIAL COVERAGE. CERTAIN 2010-2014 MODEL YEAR CHEVROLET EXPRESS AND GMC SAVANA MODEL VEHICLES, EQUIPPED WITH A 6.0L FLEXIBLE FUEL ENGINE (RPO L96) AND 6-SPEED AUTOMATIC TRANSMISSION (RPO MYD), MAY HAVE A CONDITION IN WHICH HIGH DUTY CYCLE USE WHILE PULLING TRAILERS AND/OR VEHICLES (SUCH AS FLEET CUSTOMERS DRIVING CUT-AWAY MODELS WITH 16 FOOT BOXES) CAN EXCEED THE TARGET ENERGY INPUT TO THE CLUTCH. THIS MAY LEAD TO FASTER TORQUE CONVERTER CLUTCH FRICTION MATERIAL WEAR THAN EXPECTED. SOME OPERATORS OF VEHICLES WITH THIS CONDITION HAVE REPORTED A DRIVELINE VIBRATION OR SHUDDER FEELING. IF THE CONDITION OCCURS WITHIN THE SPECIAL COVERAGE TERMS, DEALERS ARE TO REPLACE THE TORQUE CONVERTER AND REPROGRAM THE TRANSMISSION CONTROL MODULE (TCM).
05-08-51-001G
Service Bulletin/Repair Instructions
This informational bulletin provides information to correct a dealer concern of what they perceive to be paint staining when the protective shipping film is removed from certain vehicles.
01-00-89-010K
Service Bulletin/Repair Instructions
This informational bulletin adds 2014 - 2015 model years to information regarding comeback prevention and using Customer Concern Verification Sheets (CCVS).
06-08-47-001K
Service Bulletin/Repair Instructions
This informational bulletin provides information on control module diagnostics and configuration, programming using the TIS Service Programming System (SPS), set-up and warranty.
10-08-45-001E
Service Bulletin/Repair Instructions
This informational bulletin updates information on electrical ground repairs using new replacement fasteners with conductive finish.
00-03-10-002I
Service Bulletin/Repair Instructions
This informational bulletin provides information on chemical staining, pitting, corrosion and/or spotted appearance of chromed aluminum wheels, along with warranty information regarding these conditions.
14-06-04-002B
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to correct a customer concern for intermittent no start due to inoperative LPG fuel pump resulting from upfitter modifications.
PI1394
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides technicians an engine repair tip for installation of pistons.
PIT3271G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
03-06-03-003D
Service Bulletin/Repair Instructions
This warranty administration bulletin provides policy information on ACDelco® replacement battery warranty procedures.
11-00-89-004A
Service Bulletin/Repair Instructions
This warranty administration bulletin adds 2012 - 2015 model years to information communicating a change in the product field action customer reimbursement procedure (U.S. Dealers Only).
PIC3278F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician the steps needed to diagnose and repair the vehicles that may have unwanted or phantom phone calls. Technician will need to determine what type of call the customer is having that is unwanted. The vehicle may receive an incoming call just like any other phone. Typically the customer will hear the phone ringing in the vehicle. This scenario also includes incoming Bluetooth calls. One type of unwanted call can be made if the key pad is faulty the OnStar system will try to make a blue button call for shorted voltage in the circuits. The OnStar module could have an internal fault and produce a "Phone Unavailable" audio message also it may have a Diagnostic Trouble Code U1500 or B1000. Refer to diagnostics for the Diagnostic Trouble Code making sure to follow any applicable Bulletins or Preliminary Information sheets. A "Ready" or "OnStar ready" audio message heard while driving. In some cases it has been found that the customer is inadvertently pressing the ?push to talk? button on the steering wheel controls. On rare occasions, other issues in the steering column or Steering Wheel Control system may induce this concern.
PIC4310K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
09-06-04-026J
Service Bulletin/Repair Instructions
This informational bulletin supplies infomation for identifying non-GM (Aftermarket) engine calibrations for gasoline engines using Tech 2® or GDS 2 (U.S. and Canada).
PI0360E
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information that accessory remote start does not work with OnStar RemoteLink? phone application.
PIP5204E
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician the diesel oxidation converter part restriction has ended. Dealer can now order the parts through the regular Customer Care and Aftersales parts process.
PI1080A
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides repair information to correct a customer concern that a crack has developed on the spring mount area of the front shock absorber mounting bracket.
03-00-91-001G
Service Bulletin/Repair Instructions
This informational bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure, when diagnosing vibration concerns.
15-06-03-001
Service Bulletin/Repair Instructions
This informational bulletin provides information that may be useful in diagnosing/testing batteries that have set for a long period of time and/or set in cold weather climates to correct a customer concern of symptoms that include, but not limited to, a slow or no crank condition that may be caused by a discharged battery.
PI1385
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information that the tire pressure monitor (TPM) sensors must always be re-learned when accessory wheels are installed on the vehicle.
14745
Service Bulletin/Repair Instructions
GENERAL MOTORS 2010-2014 CHEVROLET EXPRESS GMC SAVANA: INFORMATION ON TORQUE CONVERTER CLUTCH WEAR VEHICLES EQUIPPED 6.0L FLEXIBLE FUEL ENGINE AND 6 SPEED AUTOMATIC TRANSMISSION. *LJ SEE DOCUMENT SEARCH BUTTON FOR OWNERS LETTER*LJ
PIP5204D
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact the General Motors Product Quality Center for further assistance.
030729004I
Service Bulletin/Repair Instructions
This informational bulletin was created for the Manual Transmission Operating Characteristics. The different noises caused by driver habit, weather conditions , and normal manual transmission noises.
PIT5236B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may OnStar inoperative and Navigation/GPS/Compass issues. Technician may find Diagnostic Trouble Codes B101D sym 3C and or F0. Technician will gather data using a scan tool and contact General Motors Technical Assistance Center for further assistance. After approval technician will replace the OnStar module.
PI0655A
Service Bulletin/Repair Instructions
This preliminary information bulletin provides information on how to remove stainless steel wheel nut caps with the matching depth of socket used on the wheel nut.
030848006J
Service Bulletin/Repair Instructions
This informational bulletin provide information for the technicians to repair the rear window defroster contact or tabs.
PI1379
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a procedure to replace the upper control arm bushing to correct the customers concern of a noise and/or shake felt while driving.
1008110001C
Service Bulletin/Repair Instructions
This information provides the proper way to install the floor mats .
100089005D
Service Bulletin/Repair Instructions
This warranty informational bulletin advised the technician that when performing a wiring repair, more information is required.
PIT5236A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will need to call General Motors Technical Assistance Center for further assistance. If the Diagnostic Trouble Code B101D has a sym 37 set please refer to the latest version of PIC5492.
14515
Service Bulletin/Repair Instructions
Chassis Electronic Control Module Internal Contamination
PIT5074H
Service Bulletin/Repair Instructions
J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
04-00-89-015I
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on concerns after the Job Card has been written.
06-00-89-026M
Service Bulletin/Repair Instructions
This warranty bulletin provides labor operation numbers for customer concerns that can't be duplicated.
PIC5492C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
PIT5353
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about what XM offerings are available for vehicles. A dealer or customer can access the website listed below for vehicle specific XM offerings and availability.
05-06-04-022L
Service Bulletin/Repair Instructions
This informational bulletin provides information on top tier fuels and what brands are available.
PI1344A
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to remove and inspect the clutch select solenoid valve for damage, located in the valve body to correct the customers concern of reduced acceleration at low speeds and trans slip at lauch.
PIP5029F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on or engine misfire, rough idle, extended crank, or crank no start in some cases. Technician will need to perform published Service Information diagnostics. If technician finds carbon an upper engine and valve cleaning should be performed.
10-08-42-001D
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to check the headlamp wiring connector and replace if damaged.
10-08-98-002A
Service Bulletin/Repair Instructions
This information bulletin explains the use of drilling high strength steel in a collision repair and the GM recommended CryoCobalt Drill bit.
99-04-20-002I
Service Bulletin/Repair Instructions
This informational bulletin explains a normal condition for what and how the drive line can clunk.
PIP5133C
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the 6.6L Duramax Diesel Engine Fuel Injection Pump Part numbers 12645102, 12658095 and 12661059 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PI0564F
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to paint the areas of the frame, if there are signs of rust/corrosion after the wax coating peeled off.
09-06-04-026I
Service Bulletin/Repair Instructions
This informational bulletin was created to help technician identify non GM calibrations for the gasoline engines and the damages that may be caused by aftermarket calibrations
14730
Service Bulletin/Repair Instructions
14730 - CUSTOMER SATISFACTION PROGRAM. CERTAIN VEHICLES, EQUIPPED WITH ENGINE RPO L96 (6.0L V-8) AND TRANSMISSION RPO MYD (6 SPEED AUTO), MAY HAVE A CONDITION IN WHICH HIGH DUTY CYCLE USE WHILE PULLING TRAILERS AND/OR VEHICLES (SUCH AS FLEET CUSTOMERS DRIVING CUT-AWAY MODELS WITH 16 FOOT BOXES) CAN EXCEED THE TARGET ENERGY INPUT TO THE CLUTCH. THIS MAY LEAD TO FASTER TORQUE CONVERTER CLUTCH FRICTION MATERIAL WEAR THAN EXPECTED. SOME OPERATORS OF VEHICLES WITH THIS CONDITION HAVE REPORTED A DRIVELINE VIBRATION OR SHUDDER FEELING. DEALERS ARE TO REPROGRAM THE TRANSMISSION CONTROL MODULE (TCM).
09-06-04-026H
Service Bulletin/Repair Instructions
This informational bulletin was created to help technician identify non GM calibrations for the gasoline engines and the damages that may be caused by aftermarket calibrations
PIT5264B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The customer has 3 options while traveling through the United Sates. First if the vehicle is equipped with a navigation radio they can request a "Destination Download" to the vehicle. Second if the customer uses the OnStar RemoteLink app they can send the directions to the vehicle. The third option would be to have the vehicle loaded with a ?500 phone number? The customer will no longer be able to use their Hands Free Calling minutes when the new 500 phone number is loaded. If a customer chooses to restore Hands Free Calling in the future a new phone number will be assigned to the vehicle; previous phone numbers are not available.
11-00-89-005H
Service Bulletin/Repair Instructions
This warranty bulletin clarifies the use of dealer empowerment to satisfy the customer.
13-00-89-004J
Service Bulletin/Repair Instructions
This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
990420002I
Service Bulletin/Repair Instructions
Information on Driveline Clunk Noise
CSP-14730
Service Bulletin/Repair Instructions
CHEVROLET/GMC: DRIVELINE VIBRATIONS OR SHUDDER FEELING ARE DUE TO FRICTION MATERIAL WEAR ON FASTER TORQUE CONVERTER CLUTCH WHEN PULLING TRAILERS AND/OR VEHICLES AND EXCEED TARGET ENERGY INPUT. MODEL 2010-14 EXPRESS, SAVANA. *PE
PIT5099A
Service Bulletin/Repair Instructions
A/C Blows Warm Or Poor Performance.
14-00-89-003A
Service Bulletin/Repair Instructions
This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and now is refered to Article 3.2.9 of the 1st addition manual for details of Technician Identification and Accounting of Labor Time
PI1344
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to remove and inspect the clutch select solenoid valve for damage, located in the valve body to correct the customers concern of reduced acceleration at low speeds and trans slip at lauch.
03-06-01-023B
Service Bulletin/Repair Instructions
This information bulletin explains how to measure for oil consumpsion and possible reasons for loss of oil.
06-08-43-003E
Service Bulletin/Repair Instructions
This informational bulletin explains how to care for wiper blades.
PIP5232A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
07-08-49-020I
Service Bulletin/Repair Instructions
This informational bulletin provides a quick guide to updating which model vehicle after replacing the IPC.
PIT5264A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that are travelling from Canada to the United States. While in the United States they are unable to receive Turn-by-Turn directions. Due to the existing cellular provider not having roaming agreements in areas outside of Canada to support transmitting of the packet data required for Turn-By-Turn feature to operate. The customer has 3 options while traveling through the United Sates. First if the vehicle is equipped with a navigation radio they can request a "Destination Download" to the vehicle. Second if the customer uses the OnStar RemoteLink app they can send the directions to the vehicle. The third option would be to have the vehicle loaded with a ?500 phone number? The customer will no longer be able to use their Hands Free Calling minutes when the new 500 phone number is loaded. If a customer chooses to restore Hands Free Calling in the future a new phone number will be assigned to the vehicle; previous phone numbers are not available.
04-00-89-015H
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on concerns after the Job Card has been written.
14096C
Service Bulletin/Repair Instructions
14096C - EMISSIONS RECALL (REVISED CALIBRATION IS NOW AVAILABLE). GENERAL MOTORS HAS DECIDED TO CONDUCT A VOLUNTARY EMISSION RECALL INVOLVING CERTAIN VEHICLES EQUIPPED WITH A GASOLINE OR LIQUEFIED PETROLEUM GAS (LPG) ENGINE. THE OXYGEN (O2) SENSOR MAY FRACTURE IF CONDENSATION FROM THE CATALYTIC CONVERTER ENTERS THE O2 SENSOR AND CAUSES A SUDDEN TEMPERATURE CHANGE. IF THIS OCCURS, THE MALFUNCTION INDICATOR LAMP WILL ILLUMINATE. DEALERS ARE TO INSPECT AND, IF NECESSARY, REPLACE BANK 1, SENSOR 2 AND BANK 2, SENSOR 2 O2 SENSORS AND REPROGRAM THE ENGINE CONTROL MODULE.
PI1335
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to replace the vacuum pump assembly to correct the customers concern of the HVAC vent and floor mode inop.
PI1098A
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure on how to cold crank test a battery in a vehicle.
PIC6036
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that show an error message when a media disc is installed. Technician will need to check the Regular Production Option Code list to verify if the disc is compatible.
PIP5232
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about gasoline powered cars, mid-size trucks, light duty trucks, and heavy duty trucks with premature catalytic converter failures. It is recommended to inspect for a poor crimp on the grounds ring terminal at the engine block for the bank with the concern and repair the wire.
14-06-04-002A
Service Bulletin/Repair Instructions
This informational bulletin provides information of customer concern of the vehicle has a no start condition, caused from upfitter modifications not properly preparing the ground, causing the LPG fuel pump to lose a ground connection.
04-06-04-047M
Service Bulletin/Repair Instructions
This informational bulletin states that it no longer valid and refers to a new bulletin.
08-08-44-015E
Service Bulletin/Repair Instructions
This informational bulletin provides information on Inappropriate Warranty Claims Submitted for Damaged Radios and IPCs
PER-14096
Service Bulletin/Repair Instructions
GMC/CHEVROLET: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. IF CONDENSATION FROM CATALYTIC CONVERTER ENTERS 02 SENSOR, THE TEMPERATURE CHANGES, SUDDENLY, AND WILL FRACTURE. MODEL 2011-2013 EXPRESS, SAVANA. *PE UPDATED 10/10/14. *PE UPDATED 10/15/14. *PE UPDATED 3/24/15. *PE
PIP5204B
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIP5204C
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PI0564E
Service Bulletin/Repair Instructions
This preliminary bulletin provides information and a procedure for repairing rusted frames caused by the wax coating peeling off.
PIP5226
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about finding needle bearings during an oil change. Technician will gain access to the roller rockers to inspect them. Only replace the roller rocker that is missing needle bearings. Be sure to clean the oil drains to retrieve the needle bearings. Each roller rocker has 66 bearings.
10-08-110-001B
Service Bulletin/Repair Instructions
This informational bulletin provides information on how to use floor mats.
14151
Service Bulletin/Repair Instructions
14151 - CUSTOMER SATISFACTION PROGRAM (REVISED POPULATION, LETTER ONLY). INFORMATION ABOUT CUSTOMERS OVERFILLING THEIR COMPRESSED NATURAL GAS (CNG) TANKS IN COLD WEATHER IN CERTAIN VEHICLES WAS PREVIOUSLY SENT. ADDITIONAL 13 VEHICLES ARE ADDED FOR WHICH WE DO NOT HAVE CURRENT OWNER NAME AND ADDRESS. A LIST IS ATTACHED WITH INVOICING BUSINESS ASSOCIATE CODE, PLEASE USE THE LIST TO ASSIST WITH IDENTIFYING THE OWNER AND LOCATION OF THE VEHICLE. IF YOU ARE ABLE TO LOCATE OWNER INFORMATION FOR ONE OF THESE VEHICLES, FOLLOW THE ORDERING INSTRUCTIONS PROVIDED IN THE ORIGINAL MESSAGE TO OBTAIN A FUEL FILLER DOOR LABEL, A GLOVE BOX HANG TAG AND AN OWNER MANUAL INSERT. UPON RECEIPT, PLEASE FORWARD THE KIT TO THE CUSTOMER FOR SELF-INSTALLATION.
05-06-04-022K
Service Bulletin/Repair Instructions
This informational bulletin provides information on top tier fuels and what brands are available.
10-08-44-006C
Service Bulletin/Repair Instructions
This informational bulletin provides the technician on what to do if the customer has a navagation concern and submit a feedback form to the GM navigation disc center website.
PI1164A
Service Bulletin/Repair Instructions
This preliminary bulletin provides information on how to check for ice and/or snow build up and to install a radiator cover to correct the customers concern of reduced engine power and service engine message on.
PI1214A
Service Bulletin/Repair Instructions
The purpose of this document is to provide the Service Personnel with a guide to determine which Service Information documents and scan tool parameters to reference when encountering an: Exhaust Fluid Quality Poor Message Displayed, and a Reductant Fluid Quality Test Status that will Pass, Time Out, Fail or Interrupt and other DEF Messages that may be observed.
PI1319
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to repair the headliner air cap to correct the customers concern of the lack of air flow from the 2nd or 3rd row.
07-00-89-036G
Service Bulletin/Repair Instructions
This informational bulletin ask the dealers for digital pictures to better enhance field reports only.
02-00-89-002N
Service Bulletin/Repair Instructions
This informational bulletin provides additional information to the technicians and how to submit a field product report.
10-00-89-006E
Service Bulletin/Repair Instructions
This information bulletin provides the dealers on how to submit a product information report.
PIP5085C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on. Technician may find a P0420, P24A0 and/or P2463 set. Technician should use published Service Information diagnostics for the Diagnostic Trouble Code. If the diagnostic leads to diagnosis or replacement of the Q57 Indirect Exhaust After treatment Fuel Injector, document all of your test results.
PI0652A
Service Bulletin/Repair Instructions
THIS PRELIMINARY BULLETIN PROVIDES A INFORMATION ON HOW TO REMOVE THE SEIZED TEMPERATURE SENSORS FROM THE DPF.
PIP5204A
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PI0690B
Service Bulletin/Repair Instructions
THIS PRELIMINARY BULLETIN PROVIDES INFORMATION TO INSPECT THE BATTERY FOR PROPER GROUNDING TO THE FRAME AND ENGINE IF THE CUSTOMER BRINGS THE VEHICLE IN FOR ERRATIC SHIFTING AND MIL ON.
120604002C
Service Bulletin/Repair Instructions
Information on Exhaust Fluid Range, Exhaust Fluid Quality Poor, Service Exhaust Fluid System or Service Emission System Driver Information Center Messages
PI-0690
Service Bulletin/Repair Instructions
GM: ERRATIC TRANSMISSION SHIFTING AND ILLUMINATED MIL. TECHNICIANS MAY FIND DTCS P0961, P0965, P0969, OR P2762 AS HISTORY OR ACTIVE DTCS. *JS UPDATED 12/9/14. *PE
SB-080604003-C
Service Bulletin/Repair Instructions
GMC/CHEVROLET: ENGINES, WITH EGR SYSTEM, HAS LEAKAGE FROM EGR COOLER ENGINE COOLANT INTO THE COMBUSTION CHAMBER. MODEL 2002-15 SILVERADO, SIERRA, 2004-09 KODIAK C4500-C5500, TOPKICK C4500-C5500, 2006-15 EXPRESS, SAVANA. *PE
08-06-04-003C
Service Bulletin/Repair Instructions
This informational bulletin advises of a new testing tool for EGR cooling pressure tester.
10-06-04-013B
Service Bulletin/Repair Instructions
This informational bulletin provides additional information on DEF filling, frozen tank and general information.
12-06-04-002C
Service Bulletin/Repair Instructions
This informational bulletin provides general information and helpful guidelines to use when diagnosing and repairing diesel exhaust fluid related DIC warnings and messages.
02-06-01-022O
Service Bulletin/Repair Instructions
This informational bulletin explains possible normal diesel engine noises.
06-06-01-007H
Service Bulletin/Repair Instructions
This informational bulletin provides additional information on identifying duramax aftermarket power up devices that may cause damage to the engine and not covered under warranty.
03-06-03-004M
Service Bulletin/Repair Instructions
This warranty bulletin explains how to use the EL-50313 Midtronic GR8 Battery tester to test a battery and determin if it is warranty or not.
09-00-89-002J
Service Bulletin/Repair Instructions
This informational bulletin provides information to the dealers on properly maintaining vehicles in inventory.
PI0653B
Service Bulletin/Repair Instructions
This preliminary informational bulletin was created to inform Service Agents or Dealers, they may be charged back for parts and labor due to the turbo-chargers are being returned to the Warranty Parts center damaged, improperly assembled or missing parts and advising to properly package the complete turbochargers.
00-03-10-006K
Service Bulletin/Repair Instructions
This informational bulletin provides the technician with information on tire radial force variations and how to use it.
PIP5085B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp on. Technician may find a P0420, P24A0 and/or P2463 set. Technician should use published Service Information diagnostics for the Diagnostic Trouble Code. If the diagnostic leads to diagnosis or replacement of the Q57 Indirect Exhaust After treatment Fuel Injector, document all of your test results.
PIP4864N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have "Exhaust Fluid Low", "Exhaust Fluid Empty - Refill Now", "Exhaust Fluid Range: XXX" or "Service Exhaust Fluid - See Owners Now" on the Driver Information Center. If the technician is working on 2010 and 2011 model years campaign 11001 has now been released. Other vehicles technician will need to check the Body Control Module and the scan tool to insure the latest calibration are installed in both. Then use the scan tool to check Reductant System Data in the Engine Control Module. Ensure that all three diesel exhaust fluid level sensors are active with the diesel exhaust fluid tank level showing 100%. If the tank level is below 100% add up to 2 gallons of diesel exhaust fluid. After adding the fluid, use a scan tool to reset the reductant fluid tank level. When the reductant level warning shows "none" the diesel exhaust fluid system reset and reprogram is complete.
PIP4912C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on vehicles that may have an intermittent high idle. If a technician has duplicated, or the customer description aligns with the speeds mentioned in the idle speed description tables, the idle speed should be considered a normal characteristic of current vehicle design.
PIP4932C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles with Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0101. Technician should follow published Service Information diagnostics for any Diagnostic Trouble Codes that are set. If during diagnosis the tech has found that the Airflow Leak Equivalency Ratio or Induction System Leak Indication is above or below the specification the tech will have to carefully check for leaks in the air intake.
PIP5152A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the proper steps for filling the coolant system for vehicles with a diesel engine and rear heater systems. Dealer will need to review and use Service Information procedures for Cooling System Draining and Filling (Vac-N-Fill Diesel) after all cooling system repairs are made. When filling the cooling systems on vehicles that have been up-fitted with rear heaters, such as ambulances or buses, ensure that the rear heater is purged of all air.
PIP5007D
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that vehicles with engine Regular Production Option Code LGH or LML may have an Exhaust Fluid Quality Poor message displayed on the Driver Information Center. Technician will need to complete the current Service Information diagnostic for any current Diagnostic Trouble Codes or symptoms found. If an Exhaust Fluid Quality Poor message is displayed with a specific Diagnostic Trouble Code, use that specific Service Information diagnostic, and repair the vehicle as necessary. If the dealer has found an Exhaust Fluid Quality Poor message with no Diagnostic Trouble Code, diagnose the condition using the current Service Information diagnosis for Diagnostic Trouble Code P20EE / P207F (P2BAD for 2012 and newer model years). After making repairs use the Service Information Document titled "Reductant Fluid Quality Test (With or without Diagnostic Trouble Codess)" to evaluate and clear the Exhaust Fluid Quality Poor Driver Information Center message.
PIT3099M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
PI1290
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to replace the windshild to correct the customers concern of a loose mirrior and/or bracket fell off.
PIP4949D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a hard start or a no start. Technician may find Diagnostic Trouble Code DTCs P0087, P0088, P0191 or P128E. Technician will need to follow all Service Information diagnose for the Diagnostic Trouble Code. If the current Service Information diagnostic has led to Fuel Injection Pump replacement, Fuel Pressure Regulator 1 must be inspected for magnetic metal debris. If there is a questionable amount of magnetic debris found on Pressure Regulator 1 remove the Fuel Rail Pressure Sensor and/or Fuel Pressure Regulator 2 to inspect for magnetic metal debris. If technician will need to replace all of the parts listed under the latest version of PIP4949 found in the Service Forms section of Global Connect if debris is found. Clean and flush all fuel chassis lines, filter pipes, and other engine mounted fuel system pipes not replaced. Also the fuel filter housing must be cleaned with a new fuel filter installed. Then the fuel tank and fuel sender must be cleaned and flushed.
G-197828
Service Bulletin/Repair Instructions
14151 - CUSTOMER SATISFACTION (MESSAGE ONLY, VIN LIST WAS NOT ATTACHED TO THE PREVIOUS MESSAGE). THIS MESSAGE IS TO ALERT DEALERS THAT GENERAL MOTORS HAS BECOME AWARE THAT SOME CUSTOMERS MAY BE OVERFILLING THEIR COMPRESSED NATURAL GAS (CNG) TANKS IN COLD WEATHER BY ADDING CNG BEYOND THE RECOMMENDED FILL PRESSURE. IF CNG TANKS ARE FILLED TO A HIGHER PRESSURE THAN RECOMMENDED AT A GIVEN AMBIENT TEMPERATURE, THEN MOVED TO A MUCH HIGHER AMBIENT TEMPERATURE ENVIRONMENT, EXPANSION OF THE GAS CAUSED BY THE TEMPERATURE CHANGE MAY CAUSE PRESSURE RELIEF DEVICES ON THE VEHICLE CNG TANK(S) TO RELEASE GAS, AS DESIGNED. IF AN IGNITION SOURCE WERE PRESENT, THIS COULD CREATE A RISK OF FIRE OR EXPLOSION. AN ADVISORY LETTER WAS MAILED TO ALL INVOLVED CUSTOMERS ALONG WITH AND OWNER MANUAL CNG SUPPLEMENT AND TWO LABELS WITH INSTRUCTIONS.
G-197735
Service Bulletin/Repair Instructions
14151 - CUSTOMER SATISFACTION (MESSAGE ONLY WITH LETTER). THIS MESSAGE IS TO ALERT DEALERS THAT GENERAL MOTORS HAS BECOME AWARE THAT SOME CUSTOMERS MAY BE OVERFILLING THEIR COMPRESSED NATURAL GAS (CNG) TANKS IN COLD WEATHER BY ADDING CNG BEYOND THE RECOMMENDED FILL PRESSURE. IF CNG TANKS ARE FILLED TO A HIGHER PRESSURE THAN RECOMMENDED AT A GIVEN AMBIENT TEMPERATURE, THEN MOVED TO A MUCH HIGHER AMBIENT TEMPERATURE ENVIRONMENT, EXPANSION OF THE GAS CAUSED BY THE TEMPERATURE CHANGE MAY CAUSE PRESSURE RELIEF DEVICES ON THE VEHICLE CNG TANK(S) TO RELEASE GAS, AS DESIGNED. IF AN IGNITION SOURCE WERE PRESENT, THIS COULD CREATE A RISK OF FIRE OR EXPLOSION. AN ADVISORY LETTER WAS MAILED TO ALL INVOLVED CUSTOMERS ALONG WITH AND OWNER MANUAL CNG SUPPLEMENT AND TWO LABELS WITH INSTRUCTIONS.
PIP-4949-B
Service Bulletin/Repair Instructions
GM: DURAMAX DIESEL HARD START, NO START, OR DTC P0087 INJECTION PUMP REPLACEMENT. NORMAL SI DIAGNOSTICS MAY BE INCONCLUSIVE OR LEAD TO A FUEL INJECTION PUMP REPLACEMENT. *JS UPDATED 11/12/14. PE
PIC5959B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
99-01-39-004F
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.
PIC4310J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
PIC5759A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio "maximum number of phones are currently paired to the vehicle". Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.
00-06-01-012E
Service Bulletin/Repair Instructions
This information bulletin provides the technician the information on how to properly clean a metal surface using the correct tool.
G-196792
Service Bulletin/Repair Instructions
14096B - EMISSIONS RECALL (REVISED SERVICE PROCEDURE AND TECHLINE INFORMATION). GENERAL MOTORS HAS DECIDED TO CONDUCT A VOLUNTARY EMISSION RECALL INVOLVING CERTAIN VEHICLES EQUIPPED WITH A GASOLINE OR LIQUEFIED PETROLEUM GAS (LPG) ENGINE. THE OXYGEN (O2) SENSOR MAY FRACTURE IF CONDENSATION FROM THE CATALYTIC CONVERTER ENTERS THE O2 SENSOR AND CAUSES A SUDDEN TEMPERATURE CHANGE. IF THIS OCCURS, THE MALFUNCTION INDICATOR LAMP WILL ILLUMINATE. DEALERS ARE TO INSPECT AND, IF NECESSARY, REPLACE BANK 1, SENSOR 2 AND BANK 2, SENSOR 2 O2 SENSORS AND REPROGRAM THE ENGINE CONTROL MODULE.
PIT5206C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages ? Brake Pedal Override Feature ?, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set. Technician will use this preliminary information to find the brake pedal position data parameters in the scan tool, and also to provide some additional diagnostic help. These issues may be caused by an incorrect brake pedal position sensor input to the engine control module. Technician will verify with the scan tool if the engine control module has the correct parameters for the brake pedal position sensor. If an engine control module brake pedal position sensor relearn is performed, the truck may be temporarily repaired until the intermittent wiring issue between the engine control module and brake pedal position sensor occurs again. On 2014 and newer trucks inspect and repair any damage to X115 and X119. On the 2014 and previous trucks inspect and repair any damage to X205.
05-02-32-008F
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to replace the power steering pump and line to correct the customers concern of lack of steering assit when stopped or parking lot manuvers.
12-03-10-001B
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with ways to decrease the tire slipping on the rim and reduce to possible chances of the customers concerns over tire vibration are repair.
PIP5163A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
00-00-89-027H
Service Bulletin/Repair Instructions
This informational bulletin provides information on what products GM has to aid in the eliminating unwanted odors in a vehicle.
08-08-51-003E
Service Bulletin/Repair Instructions
This informational bulletin informs dealers to remove the protective bumper films.
14-06-04-005
Service Bulletin/Repair Instructions
This information bulletin advises of a new tool used to aid in installing Duramax glow plugs.
02-00-89-002M
Service Bulletin/Repair Instructions
This informational bulletin provides additional information to the technicians and how to submit a field product report.
PI0938A
Service Bulletin/Repair Instructions
This preliminary bulletin provides information on what labor operation number to use for various electrical/electronic control issues.
10-00-89-006D
Service Bulletin/Repair Instructions
This information bulletin provides the dealers on how to submit a product information report.
10-08-46-001B
Service Bulletin/Repair Instructions
This Technical bulletin provides a procedure to request a hard mute from Onstar when navigation is annoucing directions and to correct the customers concern of the radio being loud during navigation.
PIP4902H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
PIP4942B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a fuel leak or fuel odor. Technician may find Diagnostic Trouble Codes. If Diagnostic Trouble Codes are found technician should use published Service Information diagnostics first. If fuel leaks are found at the high pressure pump to fuel rail line fitting connections, technician should inspect the high pressure line fittings for misaligned lines and/or low torque of the line nuts. If leaks are found at the high pressure line fittings, technician will need to replace both lines.
14-00-89-003
Service Bulletin/Repair Instructions
This information for Warranty administration - Changes the Service Policy and Procedures Section 1.6.2.11 and list the requirements for the dealer to comply.
140604005
Service Bulletin/Repair Instructions
Duramax® Diesel Glow Plugs Difficult to Install Due to Carbon Buildup - New Glow Plug Bore Reamer Available
14096B
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIP-4942-B
Service Bulletin/Repair Instructions
GMC/CHEVROLET: AT BOTTOM OF FLYWHEEL HOUSING, A LEAK IS FOUND, CAUSING A FUEL ODOR, DUE TO HIGH PRESSURE PUMP TO HIGH PRESSURE LINE FITTING OR FUEL RAIL CONNECTION. 2010-2015 EXPRESS, SIERRA, SAVANA, SILVERADO. *PE
PIT5289B
Service Bulletin/Repair Instructions
Service Charging System Message Or Low Volt Gauge Reading After Cold Start.
Recalls
Service Bulletin/Repair Instructions
Vehicle Recalls
050308002F
Service Bulletin/Repair Instructions
This informational bulletin was created to aid the technician in diagnosing the difference between a shock or strut that has a fluid residule from a possible external source from a leaking shaft seal.
PIP4898B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have an engine buzz, moan, rattle, whine, or vibration type noise that can typically be heard at idle or low revolutions per minute. The noise does not indicate a problem and will not result in damage to the pump or the engine. If the customer is dissatisfied with the oil pump whine noise replacement of the oil pump will resolve the concern.
PIP5085A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P0420, P24A0 and or P2463. Technician should follow published Service Information diagnostics for the Diagnostic Trouble Codes that are set. If the diagnostic leads to diagnosis or replacement of the Q57 Indirect Exhaust After-treatment Fuel Injector, document all of your test results. If Diagnostic Trouble Codes P0420, P24A0 and/or P2463 are found, inspect the inlet and outlet of the Diesel Oxidation Catalyst for signs of damage, if damage is found replace the Diesel Oxidation Catalyst.
PI1266
Service Bulletin/Repair Instructions
This preliminary bulletin explains to the technician to use the vin when reprogramming the radio using the techline/service programming systems.
PI0373B
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure on how to reset the power folding mirriors after they been folded manually, to fix the customers concern of the mirriors shaking or fluttering at normal driving speeds.
PIC5088E
Service Bulletin/Repair Instructions
This preliminary bulletin provides procedures on how to reset or refresh the XM radio receiver is the customers states that they only get a few channels.
PIC5588B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the programming and activation of the OnStar system. For many 2008 and prior model year GM vehicles, the programming is performed using the Tech 2 and the activation is initiated by a Service Programming System. For the 2010 and UP model year vehicles, the OnStar set-up procedure and OnStar Activation request have been combined into a single programming event called OnStar Set-up and Activation in Service Programming System.
05-00-89-029C
Service Bulletin/Repair Instructions
This preliminary bulletin provides a information to the dealer for the requirements need for equipment.
12-00-89-002B
Service Bulletin/Repair Instructions
This informational bulletin provides the dealer with information on what to do when requesting a new key code for the customer.
03-00-89-006K
Service Bulletin/Repair Instructions
This information bulletin provides dealers with more information on how to better prep a vehicle for pre-delivery.
PIP5204
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Diesel Oxidation Converter part numbers 15231895, 22768282, 22770967, 22887212, 22893734 and 22977171 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIP5151B
Service Bulletin/Repair Instructions
Duramax Fuel System Contamination Identification.
PIT5289
Service Bulletin/Repair Instructions
Service Charging System Message Or Low Volt Gauge Reading After Cold Start
PIT5289A
Service Bulletin/Repair Instructions
Service Charging System Message Or Low Volt Gauge Reading After Cold Start.
09-03-10-013B
Service Bulletin/Repair Instructions
This informational bulletin provides explanation on using the tire sealent in the GM kit as a temporary fix only untill the tire can be properly repaired under the new tire warranty.
02-07-30-029W
Service Bulletin/Repair Instructions
This informational bulletin provides information to the technician on what parts of an engine or transmission will require the PQC to be notified.
12-07-30-001D
Service Bulletin/Repair Instructions
This informational bulletin provides a process to the service agents that are not required to contact PQC, to determine when to replace a assembly as opposed to repairing and if an engine or transmission is being returned, that it has all the information in relation to that part being returned.
PIT4813E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles with a "Service Charging System" message displayed on the Driver Information Center and/or a low voltage reading on the volt gauge during the first several minutes after a cold start. Technician may find a Diagnostic Trouble Code B15517 sym 03. If this concern only occurs during the first several minutes of a cold start, no repairs should be made. Dealer should communicate to the customer that this is normal operating characteristic of vehicles equipped with the diesel engine.
03-06-03-004L
Service Bulletin/Repair Instructions
This warranty bulletin explains how to use the EL-50313 Midtronic GR8 Battery tester to test a battery and determin if it is warranty or not.
SB-0000192755-A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIC5687D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that loose connection between the vehicle and a Bluetooth phone. Technician will need to use a scan tool to check the "Firmware Over-the-Air" value. If the "Firmware Over-the-Air" value is up to date and customer's concern is still present contact General Motors Technical Assistance Center for further assistance.
00-03-10-006J
Service Bulletin/Repair Instructions
This informational bulletin provides the technician with information on tire radial force variations and how to balance a tire using the balancer.
03-03-10-007I
Service Bulletin/Repair Instructions
This informational bulletin explains a normal condition of new tires may shake and vibrate for the first few miles.
12-08-132-001B
Service Bulletin/Repair Instructions
This informational bulletin explains if the fuse is open when the customer plugs in the trailer, that it may be the cause if diagnostics finds no problems to that point.
13-00-89-004I
Service Bulletin/Repair Instructions
This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
06-00-89-029J
Service Bulletin/Repair Instructions
This informational bulletin provides tips on how to care for the interior of the vehicle using products.
PIP3119M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on at low mileage. Technician may find Diagnostic Trouble Codes P0420 and or P0430 stored. Technician should be advised that the catalytic converter efficiency Diagnostic Trouble Codes P0420 and P0430 are disabled for the first hour of engine run time to allow break-in of the catalytic converter. Technician will need to use a Tech2 to check the verify engine run time on the Engine Hour Meter in the Instrument Panel Cluster Data Display/Data 1 List in the scan tool match. If the engine run time is less than one hour, the battery may have been disconnected, or another vehicle power loss event may have occurred, during vehicle manufacturing. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle. If the catalytic converter was replaced and the Diagnostic Trouble Codes set it may be a result of the engine run time restrictions no longer being in place since the vehicle is no longer new. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle.
G-191830
Service Bulletin/Repair Instructions
14096A - EMISSIONS RECALL (REVISED SERVICE PROCEDURE). GENERAL MOTORS HAS DECIDED TO CONDUCT A VOLUNTARY EMISSION RECALL INVOLVING CERTAIN VEHICLES EQUIPPED WITH A GASOLINE ENGINE. THE OXYGEN (O2) SENSOR MAY FRACTURE IF CONDENSATION FROM THE CATALYTIC CONVERTER ENTERS THE O2 SENSOR AND CAUSES A SUDDEN TEMPERATURE CHANGE. IF THIS OCCURS, THE MALFUNCTION INDICATOR LAMP WILL ILLUMINATE. DEALERS ARE TO INSPECT AND, IF NECESSARY, REPLACE BANK 1, SENSOR 2 AND BANK 2, SENSOR 2 O2 SENSORS AND REPROGRAM THE ENGINE CONTROL MODULE.
PI1235
Service Bulletin/Repair Instructions
This preliminary bulletin provides information to the technician, to check for loose grounds and the correct labor op to use
SB-0000191830-A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PI1233
Service Bulletin/Repair Instructions
This preliminary bulletin states to add the DTC symptom byte to the documentation to help aid engineering pinpoint concerns when trying to locate a root cause.
05-06-04-035D
Service Bulletin/Repair Instructions
This informational bulletin provides the technician with information on what E85 fuel may due to a non E85 vehicle.
G-191522
Service Bulletin/Repair Instructions
14096 - EMISSIONS RECALL. GENERAL MOTORS HAS DECIDED TO CONDUCT A VOLUNTARY EMISSION RECALL INVOLVING CERTAIN VEHICLES EQUIPPED WITH A GASOLINE ENGINE. THE OXYGEN (O2) SENSOR MAY FRACTURE IF CONDENSATION FROM THE CATALYTIC CONVERTER ENTERS THE O2 SENSOR AND CAUSES A SUDDEN TEMPERATURE CHANGE. IF THIS OCCURS, THE MALFUNCTION INDICATOR LAMP WILL ILLUMINATE. DEALERS ARE TO INSPECT AND, IF NECESSARY, REPLACE BOTH BANK 2 O2 SENSORS AND REPROGRAM THE ENGINE CONTROL MODULE.
SB-0000191522
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-0000191373-A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
02-07-30-029V
Service Bulletin/Repair Instructions
This informational bulletin provides information to the technician on what parts of an engine or transmission will require the PQC to be notified.
14082B
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
14082C
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
14096
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
14096A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
14105A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
14105B
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PI-1235
Service Bulletin/Repair Instructions
GENERAL MOTORS: DUE TO LOOSE GROUND TERMINAL CONNECTIONS, IN SOME VEHICLES AND TRUCKS EXPERIENCE, ACCESSORIES MALFUNCTIONS, DIC MESSAGES, IPC WARNING INDICATORS, SES LIGHT ON. *PE
09-00-89-002I
Service Bulletin/Repair Instructions
This informational bulletin provides information to the dealers on properly maintaining vehicles in inventory.
G-190699
Service Bulletin/Repair Instructions
12050B - CUSTOMER SATISFACTION (REVISED EXPIRATION DATE). CERTAIN VEHICLES, ALL EQUIPPED WITH A 10.5" REAR AXLE, MAY HAVE A CONDITION IN WHICH THE REAR AXLE RIGHT-HAND SIDE BEARING ADJUSTER CLIP AND BOLT MAY COME LOOSE WITHIN THE REAR AXLE. IF THIS OCCURS, A GRINDING NOISE AND A VEHICLE VIBRATION WOULD BE NOTICEABLE WHEN THE VEHICLE IS IN MOTION. IF THE ADJUSTOR OR BOLT PUNCTURES THE DIFFERENTIAL COVER PAN, A FLUID LEAK COULD DEVELOP. IF ENOUGH FLUID WERE TO LEAK OUT, THE DRIVER MAY HEAR INCREASING NOISE, ADDITIONAL VEHICLE VIBRATION, AND SMELL BURNT AXLE LUBRICANT. IF THE DRIVER IGNORES THESE WARNINGS AND CONTINUES TO DRIVE THE VEHICLE, A SLOW LOSS OF VEHICLE MOTION COULD OCCUR. DEALERS ARE TO INSPECT AND, IF NECESSARY, REPAIR THE REAR AXLE.
SB-0000190699
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-0000190612-A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
01-08-42-001J
Service Bulletin/Repair Instructions
This informational bulletin explains condensation in exterior lights and replacment guidelines for warranty replacement.
02-08-42-001G
Service Bulletin/Repair Instructions
This informational bulletin is to assist with the identification of issues that are not considered warrantable.
PIP5133B
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the 2010 through 2015 6.6L Duramax Diesel Engine Fuel Injection Pump Part numbers 12645102, 12658095 and 12661059 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIC5491F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
G-190294
Service Bulletin/Repair Instructions
13410 - EMISSIONS RECALL. CLEANFUEL HAS DECIDED TO CONDUCT A VOLUNTARY EMISSION RECALL INVOLVING CERTAIN VEHICLES, EQUIPPED WITH A 3-TANK LIQUEFIED PETROLEUM GAS (LPG) SYSTEM (KO7 WITH UFM). THE LPG FUEL TANKS ON THESE VEHICLES MAY NOT HAVE BEEN CLEANED SUFFICIENTLY TO REMOVE WELD DEBRIS PARTICLES DURING THE MANUFACTURING PROCESS. IF WELD DEBRIS IS IN THE TANK AND IS ALLOWED INTO THE FUEL PUMP DURING NORMAL OPERATION, THE LPG THAT IS CONTINUOUSLY CYCLED THROUGH THE FUEL PUMP WILL FLUSH THE DEBRIS THROUGH THE FUEL PUMP. HOWEVER, IF THE VEHICLE IS ON A HILL AND NO LPG IS CYCLED THROUGH THE FUEL PUMP, THE DEBRIS WILL NOT BE FLUSHED THROUGH THE FUEL PUMP AND CAN CAUSE DAMAGE TO THE FUEL PUMP. IF DAMAGE OCCURS, THE FUEL PUMP WILL BEGIN MAKING NOISE AND EVENTUALLY, THE VEHICLE MAY NOT START. DEALERS ARE TO CLEAN THE FUEL TANKS AND THE TANK MAGNETS, AND REPLACE THE FUEL PUMP.
PIT3099L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partect for assistance. Technician can also contact Techline Customer Support Center for programming issues.
SB-0000190294-A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIP5168C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published ?Engine Cranks But Does Not Run? diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.
13-00-89-004H
Service Bulletin/Repair Instructions
This information bulletin provides the technician with additional information on fixing the vehicle right the first time by listing possible concerns to specific vehicles.
PI1214
Service Bulletin/Repair Instructions
The purpose of this document is to provide the Service Personnel with a guide to determine which Service Information documents and scan tool parameters to reference when encountering an: Exhaust Fluid Quality Poor Message Displayed, and a Reductant Fluid Quality Test Status that will Pass, Time Out, Fail or Interrupt and other DEF Messages that may be observed.
PI0610B
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to reprogram the BCM if the customer states the power doors re-lock automatically within 2 minutes after being unlocked with the RKE.
PIP3343E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.
12050B
Service Bulletin/Repair Instructions
Rear Axle Grinding Noise, Vibration - Inspect Rear Axle
1406130001
Service Bulletin/Repair Instructions
High Voltage Safety ? High Voltage Disabling
14082A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
14105
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIP-5168-C
Service Bulletin/Repair Instructions
GMC/CHEVROLET: SOME VEHICLES/TRUCKS MAY EXPERIENCE A NO CRANKING OR STARTING, CAUSED BY POSSIBLE EXCESSIVE LEAKAGE FROM CYLINDER PAST EXHAUST OR INTAKE VALVE, LOW STATIC COMPRESSION, SENSOR IS DISCONNECTED, OR WHILE CRANKING, VALVE TRAIN FAILS TO MOVE. MODEL 2009-2014 CORVETTE, CAMARO, EXPRESS, SS, SILVERADO, SUBURBAN, TAHOE, SAVANA, SIERRA, YUKON. *PE
03-06-03-004K
Service Bulletin/Repair Instructions
This warranty bulletin explains how to use the EL-50313 Midtronic GR8 Battery tester to test a battery and determin if it is warranty or not
PIT5125A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles proper operation of the stop and/or turn signals. For vehicles without Regular Production Option Code V4D circuit 618 is for the left stop and turn signal and circuit 619 dark green is for the right stop and turn signal. For vehicles with Regular Production Option Code V4D circuit 618 yellow is for the left turn signal only. Circuit 619 dark green is for the right turn signal only and circuit 1320 light blue is for the stop lamps only.
SB-0000188488-A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-0000188389-A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIP3343D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an oil leak shortly after a cold start when extremely low ambient temperatures are present. Technician will need to clean the area of the oil leak, clean and dry the PCV hoses, and replace the oil fill cap with part number 12589430.
SB-0000187782-A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
13-00-89-004G
Service Bulletin/Repair Instructions
This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
PIP5088B
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the 2010 through 2015 6.6L Duramax Diesel Engine Part number 12638502 has been placed on a parts restriction through General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIC5374C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a frequent "off route" messages while following Turn by Turn route. Technicians will need to remove power from the Vehicle Communication Interface Module for one hour and retest for the concern.
PIC5959A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
PIT5264
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that when a Canadian customer may comment that when they travel to the United States, they are unable to connect to OnStar or use hands free calling. Dealer can advise the customer that the existing cell phone provider not having roaming agreements in areas outside of Canada. At this time, a customer has the option of contacting OnStar to have a 500 number loaded for OnStar operation while in the United States.
PIC4801F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have an OnStar Turn-By-Turn Navigation the system that is inoperative. Technician verifies there are no Diagnostic Trouble Codes are present in the Antilock Braking System and Vehicle Communication Interface Module of the vehicle. If no Diagnostic Trouble Codes found call OnStar using the Blue button on the OnStar key pad and ask the advisor for a turn by turn route. Also make a OnStar personal call and a call into the vehicle. If normal diagnostics do not lead to a resolution technician will need to call General Motors Technical Assistance Center for further assistance.
10-06-05-002A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
14082
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIT4864F
Service Bulletin/Repair Instructions
Information On Requests To Add OnStar Bluetooth Option.
03-06-04-017G
Service Bulletin/Repair Instructions
This informational bulletin explains the use of diesel fuel additives to remove water or enhance performance.
PIC3011H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have the OnStar system does not respond properly to some numbers and/or voice commands. Dealer should direct the customer to review the operational characteristics in the OnStar Users Guide.
PIC5491E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.
12-07-30-001C
Service Bulletin/Repair Instructions
This informational bulletin provides a process to the service agents that are not required to contact PQC, to determine when to replace a assembly as opposed to repairing and if an engine or transmission is being returned, that it has all the information in relation to that part being returned.
PIP5184
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that when replacing the camshaft part number 12626660. Technician will need to ensure that the date code and the finish of the camshaft. If the cam is discolored or has chatter marks, have parts department send the cam back as (MR code7) new defective.
PIP5168B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published ?Engine Cranks But Does Not Run? diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.
09-03-10-016B
Service Bulletin/Repair Instructions
This informational bulletin explains how to balance a chrome wheel without damaging the chrome face of the rim.
10-08-64-002C
Service Bulletin/Repair Instructions
This warranty bulletin explains how to determine if an outside mirrior was damaged by the customer and what is considered warranty and non-warranty.
12-03-10-001A
Service Bulletin/Repair Instructions
This informational bulletin provides technicians with ways to decrease the tire slipping on the rim and reduce to possible chances of the customers concerns over tire vibration are repair.
12-03-10-002A
Service Bulletin/Repair Instructions
This informational bulletin provides the technician the proper way to install and torque the wheel.
05-03-10-020E
Service Bulletin/Repair Instructions
This informational bulletin explains the use of Nitrogen in GM tires.
07-03-10-008D
Service Bulletin/Repair Instructions
This bulletin provides information regarding the normal tire wear condition of slight or mild tire feathering and recommended practices.
08-03-10-006E
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure on cleaning a leaking rim, to correct a customers concern of having a slow tire leak and low tire psi message on.
13-00-89-004F
Service Bulletin/Repair Instructions
This informational bulletin helps the technician quick reference repairs to bulletins as opposed to replacing parts that may be un necessary.
PI0235H
Service Bulletin/Repair Instructions
This preliminary information bulletin provides a procedure to repair the joint being loose or out of position for the turbocharger to turbocharger exhaust pipe or turbocharger exhaust pipe exhaust downpipe connection, to correct the customers concern of Exhaust Leak or Vibration/Rattle Noise at Approximately 900 RPM, Fuel Smell, White Smoke, Oily Substance on Exhaust Downpipe.
PI1156A
Service Bulletin/Repair Instructions
This preliminary bulletin provides a procedure to replace the door handle rod clips to correct the customers concern of the outside door handles wont open the door.
PIP5088A
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the 6.6L Duramax Diesel Engine Part number 12638502 has been placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIT4943C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0442. Technician will need to review Techlink article from May 2013 titled "Using the Evaporative Emissions System Tester" Technician will need to follow these steps to help diagnose the issue. First after the P0442 has been verified do not disturb any of the fuel system components. The technician now can use the scan tool to close the Evaporative Emissions System. If possible change the tank pressure sensor units from inch_H2O to milimeter_Hg for better resolution. Now the vehicle can be stared to monitor the tank pressure sensor output value for approximately two minutes. If the tank pressure sensor value does change, pressurize the fuel tank side of the purge solenoid with the GE 41413-A / J 41413-A and the necessary adaptors. Now add smoke and allow pressure to stabilize for 2 minutes. If smoke is allowed to pass through the purge solenoid, replace the purge solenoid. If the tank pressure sensor value does not change, then install CH-48096 adaptor between the purge line from the canister and the purge solenoid. With the Evaporative Emissions System closed, pressurize the system through the CH-48096 adaptor and allow the system to completely stabilize, by observing the Press / Vac Gauge for a minimum of 5 minutes. Now add smoke to the system with GE 41413-A / J 41413-A after system stabilization. Now inspect the purge solenoid, engine side, fuel cap, canister vent solenoid filter and any line quick connects. When the leak is unable to be located, test under a vacuum condition. his type of leak may be detected by using the scan tool Purge/Seal function to create a vacuum in the Evaporative Emissions System and then observe the FTP sensor parameter for vacuum decay.
02-08-98-002E
Service Bulletin/Repair Instructions
The informational bulletin provides a procedure to remove and repair rust from a Hem Flange.
05-08-48-001D
Service Bulletin/Repair Instructions
This warranty administration bulletion provides the dealer technician information and guidelines for claiming a windshield.
99-01-39-004E
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure to correct the customers concern of odor coming from the Air conditioning.
PI0488D
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a procedure to inspect the transmissions filter for splits or cracks to correct the customers concern for no forward, reverse or slips.
PIC5453A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that General Motors and General Motors of Canada Company do not support cross border sales. The General Motors of Canada Customer Care Centre is the sole authorized provider of a certification confirmation letter which helps our customers identify if their vehicles meets the required USA regulatory standards necessary for importation into the USA.
PIP5104A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a cold engine tick noise for 50 seconds at start up. Technician determines if the tick noise is possibly coming from the exhaust manifold, as this noise could easily be mistaken for an engine tick noise. If your SI diagnosis does not isolate the cause of this concern, this concern should be considered a vehicle design characteristic of the ECM calibration and no additional repairs should be performed.
130089004F
Service Bulletin/Repair Instructions
Car and Truck Fix it Right the First Time Issues
99-08-51-007F
Service Bulletin/Repair Instructions
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
PI-1156-A
Service Bulletin/Repair Instructions
GM: THE OUTSIDE DOOR HANDLE MAY BE INOPERATIVE. THE LOCK MAY HAVE BECOME OR DISENGAGED FROM THE CLIPS IN THE FRONT SIDE DOOR LOCK/LATCH. THE LOCK ROD CLIPS MUST BE REPLACED. *JS
PI-1164
Service Bulletin/Repair Instructions
GMC/CHEVROLET: SERVICE ENGINE MESSAGE IS DISPLAYED DUE TO REDUCED ENGINE POWER CAUSED BY SNOW OR ICE BEING INGESTED INTO AIR CLEANER HOUSING AND ACCUMMULATING, RESULTING IN RESTRICTED AIRFLOW TO ENGINE. MODEL 2011-2014 EXPRESS, SAVANA. *PE
04-00-89-053F
Service Bulletin/Repair Instructions
This informational bulletin provides information for the dealer technician to gather as much information to help aid Engineers by completely filling out requested reports.
PIC5959
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that has no XM audio on certain channels but XM channel info is displayed. Technician will need to contact XM and deactivate and activate the module.
11-00-89-002B
Service Bulletin/Repair Instructions
This informational bulletin was created to inform that any accessories that are install from the GM factory will be covered under the standard vehicle warranty and dealer installed accessories will be cover for a full year (12months).
PIC5953
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have an issue when using Bluetooth voice recognition with an iPhone. Technician should work with the customer to insure the phone contacts to not have any Emojis loaded to any contact.
PIP5168A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published "Engine Cranks But Does Not Run" diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.
PIP4112N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear.
14-06-04-002
Service Bulletin/Repair Instructions
This informational bulletin provides information of customer concern of the vehicle has a no start condition, caused from upfitter modifications not properly preparing the ground, causing the LPG fuel pump to lose a ground connection.
PIP3140F
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
PIP5133A
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the 6.6L Diesel Engine Fuel Injection Pump part numbers 12645102 and 12658095 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIT4813D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles with a "Service Charging System" message displayed on the Driver Information Center and/or a low voltage reading on the volt gauge during the first several minutes after a cold start. Technician may find a Diagnostic Trouble Code B15517 sym 03. If this concern only occurs during the first several minutes of a cold start, no repairs should be made. Dealer should communicate to the customer that this is normal operating characteristic of vehicles equipped with the diesel engine.
01-07-30-042H
Service Bulletin/Repair Instructions
This information was created to inform the technician that the 2-3 upshift and the 3-2 downshift clunk is caused by the releasing of the 2-4 band and application of the 3-4 clutch assembly during an upshift. Also during a 3-2 downshift, the releasing of the 3-4 clutch during the application of the 2-4 band, can cause torque reversal down the output shaft creating a clunk. This is a normal condition.
08-08-44-029D
Service Bulletin/Repair Instructions
This Informational bulletin explains the warranty and policy exchange program for electronic devices and products, what can be approved by TAC and where the electronic parts can be returned to.
04-00-89-015G
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on concerns after the Job Card has been written.
PIP5169
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that are setting Diagnostic Trouble Code P0300 after engine repairs. Technician will need to ensure that injector connectors for cylinder 5-7 and 6-8 are not crossed.
PIT4423H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an aftermarket, add-on back up alarm will sound when unlocking the doors with the Remote Keyless Entry remote. Technician can correct this concern by turning off the perimeter lighting feature on vehicles with Driver Information Center controls or install an isolation relay in-line to the backup alarm.
04-00-89-015F
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information of the JOB CARD, for a repair on vehicles and what is acceptable - customer authorization; Service manager approvals and transaction authorization; Details of concern, cause and correction; Labor Time; Technician ID and acoutablity of labor time; Proper documentation and retension of warranty parts; Accurate sublet charges and receipts; Add on concerns after the Job Card has been written.
07-00-89-037G
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on GM?s policy for comprehensive courtesy transportation to its customers.
140604002
Service Bulletin/Repair Instructions
Information for No Start Due to Inoperative LPG Fuel Pump Resulting From Upfitter Revisions
PI0281D
Service Bulletin/Repair Instructions
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
PI1164
Service Bulletin/Repair Instructions
Reduced Engine Power with Service Engine Message Displayed and DTC P2263 Set Condition/Concern Some customers may comment on vehicle reduced engine power with a Service Engine message displayed. Upon inspection, a technician may find DTC P2263 set. This condition may be caused by snow or ice being ingested into the air cleaner housing and accumulating in the air cleaner element, resulting in restricted airflow into the engine. Recommendation/Instructions Remove the air cleaner element. Refer to Air Cleaner Element Replacement in SI.
SB-14-06-04-002
Service Bulletin/Repair Instructions
CHEVROLET/GMC: DUE TO AN INOPERATIVE LPG FUEL PUMP, AN INTERMITTENT CONDITION OF NO START IS CAUSED. MODEL 2012-2014, EXPRESS, SAVANNA. *PE
10-00-89-006C
Service Bulletin/Repair Instructions
This informational bulletin provides directions on submitting different PIRs
08-08-44-015D
Service Bulletin/Repair Instructions
This preliminary bulletin explains physical damage to radios and IPCs must be reviewed and validated if covered under GM warranty or not.
13-00-89-004E
Service Bulletin/Repair Instructions
This preliminary information bulletin provides a revision of 13-00-89-004D to include updated information.
PI0754A
Service Bulletin/Repair Instructions
This preliminary bulletin explains the marks in the glass are normal when wearing polarized sunglasses and do not replace any glass for this reason.
05-00-89-072C
Service Bulletin/Repair Instructions
This informational bulletin provides information on how to save fuel and proper maintenance without using fuel or oil additives.
PI0592C
Service Bulletin/Repair Instructions
This preliminary bulletin provides information on Service Programming System (SPS) Errors (E4398, E4399, E4403, E4404, E4413, E4414, E4423 or E4491).
13-00-89-004D
Service Bulletin/Repair Instructions
This informational bulletin provides an update for 13-00-89-004C to include updated information.
PIP5151A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a hard start, no start, rough running, or low fuel pressure. Technician may find Diagnostic Trouble Codes P0087, P0088, P0191 and P128E during the inspection. If during the inspection of the fuel system contamination is found the complete fuel system will need to be cleaned and flushed. After the fuel system is cleaned out test the fuel using PIT3173C.
00-06-01-026E
Service Bulletin/Repair Instructions
This informational Bulletin provides a revision for 00-06-01-026D to add the 2014 model year.
PI0235G
Service Bulletin/Repair Instructions
This preliminary bulletin provides a revision for PI0235F to add the 2014 model year and update the Labor Operation to the Global Labor Code (GLC).
PIT4376G
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician about key and theft information for Fleet Vehicles equipped with RPO 6E2 or 6E8 and converting to fleet mode. Technician will need to ensure fleet vehicles with RPO 6E2 or 6E8 should be checked to verify that the Theft Deterrent Module is in fleet mode prior to attempting to add keys.
PI0018B
Service Bulletin/Repair Instructions
This preliminary bulletin provides a pre-inspection symptom list before preforming any repairs to any of windows for noises or performance.
PIP4912B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on vehicles that may have an intermittent high idle. If a technician has duplicated, or the customer description aligns with the speeds mentioned in the idle speed description tables, the idle speed should be considered a normal characteristic of current vehicle design.
04-06-04-047L
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 04-06-04-047K to add the 2014 model year.
05-06-04-022J
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 04-06-04-047 to add the 2014 model year.
PI1098
Service Bulletin/Repair Instructions
This preliminary Informational bulletin provides information on Battery Test Cold Cranking Amperage (CCA) for Original Equipment Batteries and Testing Tips.
09-06-04-015B
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 09-06-04-015A to add the 2012-2014 model years.
10-08-110-001A
Service Bulletin/Repair Instructions
This informational Bulletin provides a revision for 10-08-110-001 to add the 2012-2014 model years.
130089004D
Service Bulletin/Repair Instructions
Car and Truck Fix it Right the First Time Issues
PI-0018-B
Service Bulletin/Repair Instructions
GENERAL MOTORS: THE WINDOWS, FRONT AND REAR, WOULD BIND, POOR FIT, MISALIGNMENT, MAKES RATTLE OR SQUEAKING NOISES, MOVES SLOWLY AND IS INOPERATIVE. MODEL 2008-2014 VEHICLES AND TRUCKS. *PE
PIC5932
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about customers that may complain of various concerns when using Bluetooth components. Technician should use the Preliminary Information to gather information from the customer on their Bluetooth device and the concern they are having before calling General Motors Technical Assistance Center.
PIP5163
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about engine block of possible cylinder bore damage, scoring or out of round as the possible cause of engine oil consumption, misfire, cylinder leakage or blow by. Technician will need to inspect the engine for Cylinder damage or scoring, An out of round cylinder bore, Dirt intrusion, and Catalytic Converter failure.
PIP5161
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on a rough running engine, and/or oil consumption. Technician will find Diagnostic Trouble Code P0300 set. Technician will apply regulated air pressure through the PCV pipe and spray soapy water where the PCV baffle and valve cover meet with soapy water to inspect for possible signs of a leak. Technician will replace the value cover if a leak is present.
120604002B
Service Bulletin/Repair Instructions
Information on Exhaust Fluid Range, Exhaust Fluid Quality Poor, Service Exhaust Fluid System or Service Emission System Driver Information Center Messages
PIC5491D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.
PIC5492B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
PIT5236
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D stored in Telematics Communication Interface Control Module. Technician will need to call General Motors Technical Assistance Center for further assistance. If the Diagnostic Trouble Code B101D has a sym 37 set please refer to the latest version of PIC5492.
130089004C
Service Bulletin/Repair Instructions
Car and Truck Fix it Right the First Time Issues
130089010
Service Bulletin/Repair Instructions
PAC Courtesy Transportation Assistance Program
PIT3237G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the percentage of UV protection or tint offered by the windshield or side glass. Technician should be advised Windshield reduces UV rays down to 4% or less. Front side door glass reduces UV rays down to 35% or less. Windshields are SOLAR glass with a light transmittance of >/=70%. Front door glass are Solar glass with a light transmission of >/=70%. Rear door glass, quarter windows and back windows can use either Solar glass (>/=70%) or Privacy glass, which has a light transmittance of 20%.
PIT4844E
Service Bulletin/Repair Instructions
Adding Cruise Control (RPO K34)
PIP5152
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the proper steps for filling the coolant system for vehicles with a diesel engine and rear heater systems. Dealer will need to review and use Service Information procedures for Cooling System Draining and Filling (Vac-N-Fill Diesel) after all cooling system repairs are made. When filling the cooling systems on vehicles that have been up-fitted with rear heaters, such as ambulances or buses, ensure that the rear heater is purged of all air.
PIC5491C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics. Technician may need to contact General Motors Technical Assistance Center depending on the STID, Station ID, or OnStar Customer Identifier.
PIP4864M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have "Exhaust Fluid Low", "Exhaust Fluid Empty - Refill Now", "Exhaust Fluid Range: XXX" or "Service Exhaust Fluid - See Owners Now" on the Driver Information Center. If the technician is working on 2010 and 2011 model years campaign 11001 has now been released. Other vehicles technician will need to check the Body Control Module and the scan tool to insure the latest calibration are installed in both. Then use the scan tool to check Reductant System Data in the Engine Control Module. Ensure that all three diesel exhaust fluid level sensors are active with the diesel exhaust fluid tank level showing 100%. If the tank level is below 100% add up to 2 gallons of diesel exhaust fluid. After adding the fluid, use a scan tool to reset the reductant fluid tank level. When the reductant level warning shows "none" the diesel exhaust fluid system reset and reprogram is complete.
PIP5007C
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that vehicles with engine Regular Production Option Code LGH or LML may have an Exhaust Fluid Quality Poor message displayed on the Driver Information Center. Technician will need to complete the current Service Information diagnostic for any current Diagnostic Trouble Codes or symptoms found. If an Exhaust Fluid Quality Poor message is displayed with a specific Diagnostic Trouble Code, use that specific Service Information diagnostic, and repair the vehicle as necessary. If the dealer has found an Exhaust Fluid Quality Poor message with no Diagnostic Trouble Code, diagnose the condition using the current Service Information diagnosis for Diagnostic Trouble Code P20EE / P207F (P2BAD for 2012 and newer model years). After making repairs use the Service Information Document titled "Reductant Fluid Quality Test (With or without Diagnostic Trouble Codes)" to evaluate and clear the Exhaust Fluid Quality Poor Driver Information Center message.
PIT3099K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory pats. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.
990940005G
Service Bulletin/Repair Instructions
Seat Belt Extender Availability
PI0564D
Service Bulletin/Repair Instructions
Wax Coating on Frame Peeling, Metal Shows Corrosion/Rusting.
PIP4894A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIP5151
Service Bulletin/Repair Instructions
Duramax Fuel System Contamination Identification.
03-08-46-004N
Service Bulletin/Repair Instructions
This informational bulletin provides information on Part Restriction and Ordering Process Information for OnStar Vehicle Communication Interface Modules (VCIM).
PIP4898A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have an engine buzz, moan, rattle, whine, or vibration type noise that can typically be heard at idle or low revolutions per minute. The noise does not indicate a problem and will not result in damage to the pump or the engine. If the customer is dissatisfied with the oil pump whine noise replacement of the oil pump will resolve the concern.
01-03-10-003K
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on GM of Canada New Vehicle Limited Warranty Tire Program and Global Warranty Management (GWM) Submission Information.
06-00-89-026L
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on a revised customer concern not duplicated/verified labor operation numbers and how to submit CCND.
PIC5904
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the OnStar system will not connect. Technician should record module info per the latest version of PIC4310 and contact General Motors Technical Assistance Center.
06-06-01-010B
Service Bulletin/Repair Instructions
This informational bulletin provides information on close-coupled converter and engine replacement.
99-09-40-005G
Service Bulletin/Repair Instructions
This informational bulletin provides information on availability for the seat belt extender.
PIP4404E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician vehicles with a slight rough idle. Technician should compare the concern with a like vehicle. If the concern is worse than a like vehicle, technician should follow published Service Information diagnosis and repair as necessary.
00-03-10-003R
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information new tire warranty program and global warranty management submission information.
PIP4112M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear.
PIP4138N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.
PIP4112L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of a complaint of a sag or hesitation when accelerating. The concern is present when coasting at low speeds of less than 15 miles per hour and then aggressively applying the throttle, or after making a hard stop followed by an aggressive throttle. This is considered normal operation of the vehicle the throttle is delayed and opened slowly up to .7 seconds to help minimize driveline lash and clunking or will have approximately .5 seconds of zero torque to allow the transmission to shift to first gear.
SB-13139
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
03-06-03-004I
Service Bulletin/Repair Instructions
This informational bulletin provides information for warranty codes that are generated by EL-50313 midtronics GR8 battery tester/charger.
02-07-30-029U
Service Bulletin/Repair Instructions
This informational bulletin provides information for the PQC assembly replacement process.
PI1018
Service Bulletin/Repair Instructions
This preliminary information bulletin provides information on poor or no transmitter range when using the remote keyless entry (RKE) and/or remote vehicle start (RVS).
10-00-89-010C
Service Bulletin/Repair Instructions
This informational bulletin provides information on key codes security rules and information on GM key code look up application.
PIP4798H
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the 6.6L Duramax Diesel Engine Control Module Part numbers 12648344 and 12654088 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
PIP5133
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Duramax Diesel Engine Fuel Injection Pump Part number 12645102 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
08-08-51-003D
Service Bulletin/Repair Instructions
This informational bulletin provides information to inform dealers to remove the protective film bumper covers from the vehicle upon delivery.
13-00-89-008
Service Bulletin/Repair Instructions
This informational bulletin provides information for GM wiring repair.
10-00-89-009B
Service Bulletin/Repair Instructions
This informational bulletin provides information on key code security and information on GM key code look up applications.
130089008
Service Bulletin/Repair Instructions
GM Wiring Repair Strategy Information
130090001
Service Bulletin/Repair Instructions
Information for Engine Oils Used in 2014 Model Year Vehicles
13139
Service Bulletin/Repair Instructions
PSR-Compressed Natural Gas (CNG) Fuel Tank Shut-Off Solenoid Connector
PIP5068A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
10-06-01-004B
Service Bulletin/Repair Instructions
This technical bulletin provides a revision for 10-06-01-004A to update the Parts Information.
PI1006
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information for Malfunction Indicator Lamp (MIL) On,Various O2 Sensor DTCs Set Condition.
PIP3119L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on at low mileage. Technician may find Diagnostic Trouble Codes P0420 and or P0430 stored. Technician should be advised that the catalytic converter efficiency Diagnostic Trouble Codes P0420 and P0430 are disabled for the first hour of engine run time to allow break-in of the catalytic converter. Technician will need to use a Tech2 to check the verify engine run time on the Engine Hour Meter in the Instrument Panel Cluster Data Display/Data 1 List in the scan tool match. If the engine run time is less than one hour, the battery may have been disconnected, or another vehicle power loss event may have occurred, during vehicle manufacturing. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle. If the catalytic converter was replaced and the Diagnostic Trouble Codes set it may be a result of the engine run time restrictions no longer being in place since the vehicle is no longer new. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle.
04-00-89-015E
Service Bulletin/Repair Instructions
This technical bulletin provides a revision for 04-00-89-015D to update content and incorporate the U.S. version of Bulletin 12-00-89-003.
03-00-89-006J
Service Bulletin/Repair Instructions
This technical bulletin provides a revision for 03-00-89-0061I to add the 2014 model year and Transport Mode heading.
05-09-40-002G
Service Bulletin/Repair Instructions
This technical bulletin provides a revision of 05-09-40-002F to add the 2013-2014 model years.
07-08-49-020H
Service Bulletin/Repair Instructions
This technical service bulletin provides a revision for 07-08-49-020G to add the 2014 model year and update model list.
12-02-32-002A
Service Bulletin/Repair Instructions
This technical bulletin provides a revision for 12-02-32-002 to add the 2013-2014 model years, add noise as a possible condition and add a Note in the Instructions section.
PI-0011A
Service Bulletin/Repair Instructions
GM: THE FRONT OR REAR DOOR MAY NOT OPEN FROM THE INSIDE OR OUTSIDE HANDLE, THE DOOR WILL NOT UNLOCK WITH ANY METHOD. THE PROBABLY CAUSE AN INCORRECT INSTALLATION OF A HANDLE COMPONENT. *RM UPDATED ON 7/26/2013. ALL 2014 AND PRIOR GM PASSENGER CARS AND TRUCKS. *KB
00-05-22-002N
Service Bulletin/Repair Instructions
This informational bulletin provides information for Disc Brake Warranty Service and Procedures.
PI0011C
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a revision for PI0011C to add the 2013-2014 model years and update Warranty Information.
13-00-89-006
Service Bulletin/Repair Instructions
This informational bulletin provides information for Warranty Administration ? Changes in Powertrain Warranty Coverage Effective with 2010 Model Year.
PI0086E
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information onUnexpected Loss of Radio Audio (Radio Goes Silent/No Sound) and Other Blackberry® Phone - Bluetooth® Issues Concern.
PI0574A
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a revision for PI0574A to include the 2013-2014 model year vehicles, update the covered models and the Recommendation/Instructions section.
08-06-01-006D
Service Bulletin/Repair Instructions
This informational bulletin provides information for Engine Squealing Type Noise on Start-up or Vibration Condition.
11-00-89-005E
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 11-00-89-005D to add additional Mandatory Minimum Tables and additional information concerning Policy decision making.
PI0639B
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a revision of PI0639B to add the 2013 model year and update the labor operation information.
PIT5214
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have had multiple repair attempts are being performed on customer?s vehicles that exhibit vibration conditions without utilizing the support of General Motors Technical Assistance Center. If valid vibration frequency or Road Force Variation data has been collected and a repair attempt does not correct the customer complaint, contact General Motors Technical Assistance Center for further support. For any vehicles that remains unrepaired after being at the dealer for three days or more and a related bulletin or PI is not found, contact General Motors Technical Assistance Center for further support.
02-08-98-002D
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 02-08-98-002C to add the 2010-2013 model years and revise the Approved Refinish Materials booklet information.
11-00-90-001B
Service Bulletin/Repair Instructions
This informational bulletin provides a revision 11-00-90-001A to add the 2014 model year. Also, a bullet was added to the dexos 2? section with information on the 2014 Cruze diesel.
09-00-89-008A
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 09-00-89-008 to add model years, update the Labor Operation Information and Transaction Submissions Procedure and general content updates.
PI0592B
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a revision of PI0592A to add the 2013 and 2014 model years.
07-03-10-015C
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 07-03-10-015B to add the 2013-2014 model years and remove the Saab Warranty Information.
05-08-48-001C
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 05-08-48-001B to add 2010-2014 model years and update Labor Operation.
PIP4798G
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Duramax Diesel Engine Control Module Part numbers 12648344 and 12654088 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
05-03-07-009F
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 05-03-07-009E to add the 2014 model year and update the Labor Operations.
13-00-89-004B
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 13-00-89-004A to include updated information.
06-00-89-026K
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 06-00-89-026J to add the 2014 model year and update the labor operations.
10-00-89-016A
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 10-00-89-016 to include the 2012-2014 model years and update the Labor Operation graphic.
09-03-16-002B
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 09-03-16-002A to add model years, add the current Global Labor Time Code and update the tool reference information.
09-07-30-018D
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 09-07-30-018C to add the 2014 model year and update the Labor Operation.
PIP5119
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have Diagnostic Trouble Codes P0088 and P128E sets after a fuel system or engine repair. Technician will inspect for the Fuel Rail Pressure 1 and 2 connectors being swapped.
10-00-89-005C
Service Bulletin/Repair Instructions
This informational bulletin is a revision for 10-00-89-005B to add the 2014 model year and labor codes.
11-00-89-007C
Service Bulletin/Repair Instructions
This informational bulletin is a revision for 11-00-89-007B to add the 2014 model year and update the Labor Operation List.
PI0388C
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a revision of PI0388B to add the Cadillac XTS model, graphics, improved Instructions and Warranty Information.
07-00-89-037F
Service Bulletin/Repair Instructions
This informational bulletin is a revision for 07-00-89-037E to add the 2014 model year and to update the labor operation under Courtesy Transportation Warranty Transaction Submission.
09-00-89-016C
Service Bulletin/Repair Instructions
This informational bulletin is a revision for 09-00-89-016B to add the 2014 model year and update the labor operation.
03-08-48-006I
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 03-08-48-006I to add model years and update parts information.
PIT4720C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that after replacing the Instrument Panel Cluster the exchange center is unable to program the actual mileage on the odometer or the actual mileage is unknown. Dealer will need to follow dealer to the General Motors service policies and procedures manual section 3.2.4 odometer servicing.
03-06-03-004H
Service Bulletin/Repair Instructions
This informational bulletin is a revision for 03-06-03-004G to add the 2014 model year and update the Labor Operation.
090730018D
Service Bulletin/Repair Instructions
Change in Automatic Transmission Add Condition Documentation and Claim Submission
130089004B
Service Bulletin/Repair Instructions
Car and Truck Fix it Right the First Time Issues
PI-0488
Service Bulletin/Repair Instructions
GM: THE TRANSMISSION IS SLIPPING OR HAS NO FORWARD/REVERSE MOVEMENT. *RM UPDATED 4/16/12. *PE UPDATED 6/18/12. *PE UPDATED ON 7/09/2013. *KB
PI0488C
Service Bulletin/Repair Instructions
Diagnostic Information for Transmission.
PI0639A
Service Bulletin/Repair Instructions
GM: THE SERVICE STABILITRAK MESSAGE BEING DISPLAYED IN DIC. THE STABILITRAK INDICATOR LIGHT MAY ALSO BE ON. *JS UPDATED ON 7/9/2013. *KB
SB07-08-47-004EA
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
05-02-32-008E
Service Bulletin/Repair Instructions
This technical bulletin provides a revision of 05-02-32-008D to add 2013 Model Year vehicles.
13-00-89-005
Service Bulletin/Repair Instructions
This technical bulletin provides Warranty Administration - New Labor Codes information.
PIP5110A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician of additional information while diagnosing a diagnostic trouble code P0420. Check for a possible leak in the exhaust system behind the bank one number 2 oxygen sensor. If a leak is found or there is an aftermarket utility bed or trailer hitch installed. Check for a minimum clearance of 1.5 to 2 inches of the exhaust system.
PIC4707D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have at times the XM Traffic or Weather for the local area takes several minutes to update and may read "NO DATA" or "UPDATING" during that time. Technician should be advised that Traffic and Weather data from local reporting stations and then send the updated info process may take up to 24 minutes. Technician should test for full operation of the XM band if the system has not started receiving the Traffic and weather update within 30 minutes. Also ensure the customer has not shut XM NavTraffic off in the user settings of the navigation radio. Technician will need to contact XM customer assistance to review the account status and verify that the XM Traffic option has been enabled and is available in the area.
PIP5110
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P0420. Technician will need to follow published Service Information diagnostics. Technician will check for a possible leak in the exhaust system behind the bank 1 sensor 2 O2 sensor. Technician will need to reposition the exhaust clamp or replace with a wider band clamp.
03-06-03-003C
Service Bulletin/Repair Instructions
This technical bulletin provides a revision of 03-06-03-003B to add the 2010-2014 model years, update the Attention statement, change the terms Claim Type B to Claim Type ZPTI, GM Dealer to GM Service Agent, Repair Order to Job Card, Warranty Claim to Warranty Transaction, and to update the Procedure Information for submitting Vehicle Repairs from WINS to Global Warranty Management (GWM).
PI0564C
Service Bulletin/Repair Instructions
This preliminary information bulletin provides a revision of PI0564B to add models.
99-04-20-002H
Service Bulletin/Repair Instructions
This technical bulletin provides a revision of 99-04-20-002G to add 2013-2014 model years.
13-00-89-004
Service Bulletin/Repair Instructions
This technical bulletin provides a revision of 10-00-89-017Z to include updated information.
PIP5104
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a cold engine tick noise for 50 seconds at start up. Technician determines if the tick noise is possibly coming from the exhaust manifold, as this noise could easily be mistaken for an engine tick noise. If your SI diagnosis does not isolate the cause of this concern, this concern should be considered a vehicle design characteristic of the ECM calibration and no additional repairs should be performed.
PI0572B
Service Bulletin/Repair Instructions
This preliminary information bulletin is for information on COAX Repair Kit Availability. Revised from PI0572A
02-06-01-022N
Service Bulletin/Repair Instructions
This technical bulletin provides a revision of 02-06-01-022M to add the 2013 model year.
130089003
Service Bulletin/Repair Instructions
Vehicle Software Enhancements
130089004
Service Bulletin/Repair Instructions
Car and Truck Fix it Right the First Time Issues
130089004A
Service Bulletin/Repair Instructions
Car and Truck Fix it Right the First Time Issues
PIE-0253
Service Bulletin/Repair Instructions
GENERAL MOTORS: SERVICE ENGINE SOON LIGHT ILLUMINATED ON DASH. THERE MAY ALSO BE INCREASED ENGINE NOISE, OR POSSIBLE HIGHER RPM SHIFTS, AND REDUCED A/C PERFORMANCE. *KB
PIE0253
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB12-08-132-001A
Service Bulletin/Repair Instructions
GENERAL MOTORS: ON SOME TRUCKS AND PASSENGER VEHICLES, ACCESSORY POWER OUTLETS (APO) AND TRAILER LIGHTING ARE COMMON ACCESSED ELECTRICAL SYSTEMS THAT ARE AFFECTED BY DEVICES THAT ARE PLUGGED IN AND BECOME INOPERATIVE DUE TO AN OPEN FUSE AND NO PROBLEM WITH VEHICLE IDENTIFIED. MODELS YEARS 2010-2014 TRUCKS AND PASSENGER. NO MODELS. *PE
13-00-89-003
Service Bulletin/Repair Instructions
This technical bulletin provides information on Vehicle Software Enhancements for 2014 and prior GM Passenger Cars and Light Duty Trucks.
11-00-89-005D
Service Bulletin/Repair Instructions
This warranty administration bulletin provide policy information on clarification of use-dealer empowerment labor operations and customer enthusiasm.
12-08-132-001A
Service Bulletin/Repair Instructions
This informational bulletin provides information accessory power outlet and trailer lighting fuse replacement due to electrical systems that can be affected by devices that are plugged in by the customer.
PIP5102
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have Diagnostic Trouble Code P0016 stored. Technician will need to inspect the reluctor on the crankshaft. If the reluctor has moved replace the crankshaft.
09-00-89-002H
Service Bulletin/Repair Instructions
This informational bulletin provides information for dealers to properly maintain vehicle in inventory.
PI0938
Service Bulletin/Repair Instructions
This preliminary information bulletin provides information on powertrain and various electronic/electrical control issues.
PIC5491B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
06-00-89-029I
Service Bulletin/Repair Instructions
This informational bulletin provides information on the proper cleaning products for GM hard or plastic surfaces, seats carpet, vinyl.
13-08-116-001A
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure on aftermarket ALSL or DLC devices causing multiple issues due to suspected tampering.
09-06-04-026G
Service Bulletin/Repair Instructions
This informational bulletin provides information of suspected tampering or vehicle modifications for non-GM (Aftermarket) engine and transmission calibrations for V6 and V8 gasoline engines Using Tech 2® or global diagnostic system 2 (GDS 2)
PIP5099A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have intermittent Diagnostic Trouble Code P0340. Technician will replace the cam position sensor if the vehicle build is Sept or Oct of 2012 and SI diagnostics does not lead to a resolution.
10-00-89-017Z
Service Bulletin/Repair Instructions
This informational bulletin provides information on fix it right for first time issues.
PI0926
Service Bulletin/Repair Instructions
This preliminary information bulletin provides a procedure for installing a zip tie for the fuel level sensor to correct the fuel gauge intermittently not reading full when the fuel tank is filled.
PIP5099
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent Diagnostic Trouble Code P0340. Technician will need to replace the cam position sensor to correct this Diagnostic Trouble Code P0340 concern.
00-03-10-002G
Service Bulletin/Repair Instructions
This informational bulletin provides information on the appearance of chromed aluminum wheels due to chemical staining, pitting corrosion and/or spotted.
PI0235E
Service Bulletin/Repair Instructions
This preliminary information bulletin provides a procedure to re-align the exhaust pipe and replace the gasket to eliminate an exhaust leak or vibration/rattle noise heard approximately 900 RPM, fuel smell, white smoke, oily substance on the exhaust downpipe.
PI0534B
Service Bulletin/Repair Instructions
This preliminary information bulletin provides a procedure to eliminate a whine noise that varies with engine speeds.
1308116001A
Service Bulletin/Repair Instructions
Aftermarket ALDL or DLC Interface Devices Causing Multiple Issues
PI0412B
Service Bulletin/Repair Instructions
No Crank/No Start, Dead Battery Due to Parasitic Drain/Discharge.
PIP5065D
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIP3140E
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that a noise or a vibration in the vehicle that seems to be abnormal may not have been there when the vehicle was purchased. Technician should look for Non - General Motors aftermarket accessories installed on the vehicle that can cause these issues.
PIP5094
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that, when testing any circuit for open or resistance, it is imperative that all related terminal pin fit and tension be checked when the test steps require disconnection of the connector or component, prior to any component replacement. Always use the recommended terminal test tool during these tests.
PIP4819A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have Service Engine Soon Malfunction Indicator Lamp and the engine misfires. Technician may find Diagnostic Trouble Codes P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0307, and P0308. Technician will need to inspect the spark plug wires. Technician will need to replace any loose spark plug wires.
PIP3119K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a Service Engine Soon Malfunction Indicator Lamp on at low mileage. Technician may find Diagnostic Trouble Codes P0420 and or P0430 stored. Technician should be advised that the catalytic converter efficiency Diagnostic Trouble Codes P0420 and P0430 are disabled for the first hour of engine run time to allow break-in of the catalytic converter. Technician will need to use a Tech2 to check the verify engine run time on the Engine Hour Meter in the Instrument Panel Cluster Data Display/Data 1 List in the scan tool match. If the engine run time is less than one hour, the battery may have been disconnected, or another vehicle power loss event may have occurred, during vehicle manufacturing. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle. If the catalytic converter was replaced and the Diagnostic Trouble Codes set it may be a result of the engine run time restrictions no longer being in place since the vehicle is no longer new. Technician will need to clear the Diagnostic Trouble Codes and perform a drive cycle.
120601007A
Service Bulletin/Repair Instructions
New Service Cam Bearings For Gen IV V8 Engines
PIP5088
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that 2013 6.6L Duramax Diesel Engine Regular Production Option Code (LGH and LML) part number 12638502 will be placed on a parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.
00-03-10-006I
Service Bulletin/Repair Instructions
This informational bulletin provides information on tire radial force variation.
02-07-30-029T
Service Bulletin/Repair Instructions
This informational bulletin provides information on the replacement process for the product quality center.
12-07-30-001B
Service Bulletin/Repair Instructions
This informational bulletin provides information for service agents not required to contact product quality center for CNG, LPG or gasoline engine, transmission and/or transfer case.
13-08-116-001
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure on suspected tampering due to aftermarket ALDL or DLC interface devices causing multiple issues.
08-06-04-006L
Service Bulletin/Repair Instructions
This informational bulletin provides information suspected tampering on vehicles modifications for identifying non GM ECM calibrations.
09-06-04-026F
Service Bulletin/Repair Instructions
This informational bulletin provides information on suspected tampering on vehicles modifications for identifying non GM ECM calibrations.
PI0534A
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides information on dignostics for a whine noise at varies engine speeds.
PIP5007B
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that vehicles with engine Regular Production Option Code LGH or LML may have an Exhaust Fluid Quality Poor message displayed on the Driver Information Center. Technician will need to complete the current Service Information diagnostic for any current Diagnostic Trouble Codes or symptoms found. If an Exhaust Fluid Quality Poor message is displayed with a specific Diagnostic Trouble Code, use that specific Service Information diagnostic, and repair the vehicle as necessary. If the dealer has found an Exhaust Fluid Quality Poor message with no Diagnostic Trouble Code, diagnose the condition using the current Service Information diagnosis for Diagnostic Trouble Code P20EE / P207F (P2BAD for 2012 and newer model years). After making repairs use the Service Information Document titled "Reductant Fluid Quality Test (With or without Diagnostic Trouble Codes)" to evaluate and clear the Exhaust Fluid Quality Poor Driver Information Center message.
PIP5085
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that engineering is asking for additional information if SI diagnosis leads to replacement of the Indirect Fuel Injector for a P0420 Diagnostic Trouble Code. Technician should follow published Service Information diagnostics for Diagnostic Trouble Code P0420. Technician will need to also gather quantity of fuel flow measured, engine hours, type of vehicle, and estimated percentage of time the vehicle spends at idle.
08-08-51-002A
Service Bulletin/Repair Instructions
This informational bulletin provides information pre-painting/cleaning process for TPO plastic fascias.
PIP5083
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have misfires on cylinders 1, 4, 6 and 7. Technician should inspect the camshaft part numbers. Technician should ensure to use part number for the application by using the numbers stamped on the cam.
03-00-89-013H
Service Bulletin/Repair Instructions
This informational bulletin provides information on a update for the Electronic Component Exchange Program (U.S. and Canada Only)
PIP4828A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a rough idle and/or momentary lack of power after cold starting the engine and immediately placing the transmission in gear. Technician should follow published Service Information diagnostics first. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
PIP4828B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a rough idle and/or momentary lack of power after cold starting the engine and immediately placing the transmission in gear. Technician should follow published Service Information diagnostics first. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
PIP5065C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a ticking noise when driving above 30 miles per hour in third and fourth gear. Technician will need to replpace the Reaction Carrier, Low and Reverse Roller Clutch Race, and the Low and Reverse Roller Clutch.
PIP4138M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.
PIP-4828-A
Service Bulletin/Repair Instructions
CHEVROLET/GMC: AFTER COLD STARTING ENGINE AND PLACING IN GEAR, WOULD HAVE A ROUGH IDLE AND/LACK OF POWER, MOMENTARILY BEFORE STARTUP A FEW MINUTES LATER. MODELS 2009-2013 EXPRESS, SILVERADO, SUBURBAN, SAVANA, SIERRA. *PE
PIP4138L
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on, engine misfire, and/or engine noise. Technician may find Diagnostic Trouble Codes P0300-P0308. If published Service Information diagnostics does not isolate the cause of this concern technician should check for a worn camshaft lobe and/or lifter roller, a sticking valve, valve leakage, a broken valve spring, and a collapsed active fuel management lifter.
11-00-90-001A
Service Bulletin/Repair Instructions
This informational bulletin provides information on the proper oils to use on GM vehicles including information regarding the differences of the Dexos oils.
11-00-89-005C
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on the Clarification of Use for Dealer Empowerment Labor Operations and Customer Enthusiasm
PIC5687C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that loose connection between the vehicle and a Bluetooth phone. Technician will need to use a scan tool to check the "Firmware Over-the-Air" value. If the "Firmware Over-the-Air" value is up to date and customer's concern is still present contact General Motors Technical Assistance Center for further assistance.
PIC5492A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Diagnostic Trouble Code B101D-37 history in the Vehicle Communication Interface Module or telematics communication interface control module. Engineering has determined that this code will only display in history on the scan tool and will not cause issues with OnStar system operation.
PIT3173C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that fluid contamination may be directed to one of the following testing centers according to the type of fluid needing testing. Dealer should send the correct fluid to the proper testing center.
PIT3271F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIP5065B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a ticking noise when driving above 30 miles per hour in third and fourth gear. Technician will need to replace the Reaction Carrier and the Low and Reverse Roller Clutch.
10-00-89-017X
Service Bulletin/Repair Instructions
This informational bulletin provides a list off all the issues revolving around new vehicles for a one stop place to find growing concerns around them.
PI0873
Service Bulletin/Repair Instructions
This preliminary information bulletin provides information on the repositioning of the fuel cap teather due to a binding concern causing a DTC P0442 and/or P0455 with a malfunction indicator lamp illuminated.
PI0774B
Service Bulletin/Repair Instructions
This preliminary information bulletin provides a descritption of operation of the echo control and noise cancellation settings for concernc regarding noice drop outs during calls and muffled sound.
08-08-46-004A
Service Bulletin/Repair Instructions
This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
080846004A
Service Bulletin/Repair Instructions
This informational bulletin provides information regarding the aftermarket device interference with onstar diagnostic service.
00-00-89-027G
Service Bulletin/Repair Instructions
This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
000089027G
Service Bulletin/Repair Instructions
This informational bulletin provides a step by step procedure on how to properly use the GM chemicals to eliminate unwanted odors in vehicles and which products to use for each application.
PIC4310H
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that may have an OnStar system that has progression tones when pressing the blue or red button. Technician will need to call General Motors Technical Assistance Center with the scan tool data from the OnStar system.
PIC4801E
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that may have an OnStar Turn-By-Turn Navigation the system that is inoperative. Technician verifies there are no Diagnostic Trouble Codes are present in the Antilock Braking System and Vehicle Communication Interface Module of the vehicle. If no Diagnostic Trouble Codes found call OnStar using the Blue button on the OnStar key pad and ask the advisor for a turn by turn route. Also make a OnStar personal call and a call into the vehicle. If normal diagnostics do not lead to a resolution technician will need to call General Motors Technical Assistance Center for further assistance.
PIT4733J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician that customers may inquire as to the availability of OnStar bluetooth on their vehicle. Technician should be advised that Vehicles with Regular Production Option Code (UPF or UWE) offer Bluetooth through the OnStar system.
12-03-10-002
Service Bulletin/Repair Instructions
This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
120310002
Service Bulletin/Repair Instructions
This informational bulletin provides a description of the proper wheel installation and proper wheel torque techniques used to install wheels onto vehicles
PIC5687B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that loose connection between the vehicle and a Bluetooth phone. Technician will need to use a scan tool to check the "Firmware Over-the-Air" value. If the "Firmware Over-the-Air" value is up to date and customer's concern is still present contact General Motors Technical Assistance Center for further assistance.
060089026J
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information regarding customer concerns not duplicated and which labor operations to claim when the concern cannot be duplicated. Also provides information on how to submit claims within the global warranty managment.
10-00-89-010B
Service Bulletin/Repair Instructions
This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.
100089010B
Service Bulletin/Repair Instructions
This informational bulletin provides information and rules for GM keycode look up applicationa dn the key code security rules and regulations for Canada only.
12-00-89-002A
Service Bulletin/Repair Instructions
This informational bulletin provides information for requesting a new key code for customers with lost or stolen keys
120089002A
Service Bulletin/Repair Instructions
This informational bulletin provides information for requesting a new key code for customers with lost or stolen keys
PIP5009G
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Malfunction Indicator Lamp is illuminated and the vehicle has a harsh 1-2 shift. Technician may find Diagnostic Trouble Code P0741 set in the Transmission Control Module. Technician will need to replace the torque converter clutch solenoid and wire harness with part number 24237980.
01-00-89-010J
Service Bulletin/Repair Instructions
This informational bulletin provides a revision for 01-00-89-010I to add the 2013 model year.
010089010J
Service Bulletin/Repair Instructions
This informational bulletin provides a single point reference and strategy document to aid in reducing customer comebacks, and the possibility of buyback situations by outlining specific guidelines, strategy and forms that will assist with this goal, by identifying, clarifying and documenting customer concerns accurately at each service visit.
10-00-89-017W
Service Bulletin/Repair Instructions
This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
100089017W
Service Bulletin/Repair Instructions
This informational bulletin provides a list of newly released PI and Bulletins in regards to recent released vehicles so that vehicles can be fixed right the first time in for service.
03-08-46-004M
Service Bulletin/Repair Instructions
This informational bulletin provides information on part restriction and ordering process information for onstar vehicle communication interface modules.
030846004M
Service Bulletin/Repair Instructions
This informational bulletin provides information on part restriction and ordering process information for onstar vehicle communication interface modules.
PIT4907A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about brake rotors on new vehicles and replacement parts from General Motors Service Parts Operations. Technician should be advised the costing should not be removed from the brake rotor it will wear off with normal brake usage. Dealer should communicate to the customer this condition is a normal operating characteristic of their vehicle.
10-08-64-002B
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
100864002B
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on what should be considerd warranty damage or damage that was at fault of the cutomer and how to properly claim them on the warranty paperwork
11-06-04-007C
Service Bulletin/Repair Instructions
This technical bulletin provides a procedure for replacing the throttle position sensor cover for concerns regarding a indicator lamp illuminated reduced power message displayed and DTC P2135 set.
PIT4815C
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician with additional vehicle speed sensor diagnostic information. Technician may encounter multiple issues when diagnosing a Vehicle Speed Sensor. Technician will find it difficult to follow the speed signal path between the components. To test connect the Fluke meter leads between circuits 821 and 822 and set the meter to Alternating current voltage and then press the hertz button. When the Engine Control Module showing correct miles per hour in the data list however it is setting a Diagnostic Trouble Code for the Vehicle Speed Sensor. To test connect the Fluke meter red lead to circuit 6399 and the black lead to ground, then set the meter to Direct current voltage and press the hertz button. The Instrument Panel Cluster speedo will work correctly when the Engine Control Module or Antilock Braking System Diagnostic Trouble Codes are for the Vehicle Speed Sensor. To test connect the Fluke meter red lead to circuit 1827 and the black lead to ground, then set the meter to Direct current voltage and press the hertz button. When the Antilock Braking System Malfunction Indicator Lamp on with Electronic Brake Control Module Diagnostic Trouble Code C0055 and no other customer complaints, to test connect the Fluke meter red lead to circuit 817 and the black lead to ground, then set the meter to Direct current voltage and press the hertz button.
PIT3665C
Service Bulletin/Repair Instructions
This Preliminary Information communication advises the technician that the Hydro-Boost is not serviceable and will need to be replaced if the brake pedal moves or applies on its own at a full turn.
PIP4932B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles with Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P0101. Technician should follow published Service Information diagnostics for any Diagnostic Trouble Codes that are set. If during diagnosis the tech has found that the Airflow Leak Equivalency Ratio or Induction System Leak Indication is above or below the specification the tech will have to carefully check for leaks in the air intake.
PIC4935D
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that during battery parasitic drain test, there may be some confusion as to what the normal power consumption reading should be from the OnStar system. Technician should understand the power cycles of the various OnStar systems. All Generation 6, 7, 8, and 9 systems are powered up continuously for 48 hours from ignition off. After 120 hours from ignition off, these systems then completely power off. The Onstar modules draw: * IGN ON - 240 to 400 Milliamp. * IGN OFF - 3 to 20 Milliamp for 48 hours or 120 hours on Gen 9 and vehicle communication platforms. * IGN OFF - 0.2 to 0.8 Milliamp after 48 hours or 120 hours on Gen 9 and vehicle communication platforms.
PIC5491A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an OnStar system that will not power up. Technician should turn off the ignition and cancel retained accessory power. After the vehicle has powered down, remove power to the OnStar module for five minutes. After the power has been removed for five minutes, if the OnStar system is working release the vehicle. If the OnStar system is still inoperative continue with published Service Information diagnostics.
PIT4826B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about hairline cracks may be noticed in the pad friction material, when performing a brake inspection. Technician should be advised that the hairline cracks do not affect the operation of the brake system and the pads should not be replaced if only hairline cracks are found.
PIT5054A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a click, clunk, pop type noise coming from the front end. Technician will need to align the bumper.
SB-PIP-4775-B
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIP4775B
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on shortly after cold start. Technician will find a Diagnostic Trouble Code P2181 in the Engine Control Module. Technician will need to inspect the rear heater pipes shown below for proper installation.
PI0845
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides Information for Diesel Particulate Filter (DPF) Service Regeneration Documentation.
PIP5071
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicle that has a squawk or grunt type noise when shifting from 2nd to 3rd gear. Technician should replace the 3-4 clutch Friction and Steel Clutch Plates along with the Apply Plate and Selective Backing Plate.
PIT3099J
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about installing General Motors Accessory parts. Technician can check Service Information for some accessories. Technician can also contact Partech for assistance.
PI0086D
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a list of corrections for multiple concerns regarding Unexpected Loss of Radio Audio (Radio Goes Silent/No Sound) and Other Blackberry Phone - Bluetooth Issues
06-06-01-007G
Service Bulletin/Repair Instructions
This informational bulletin provides Information on Identifying Duramax Diesel Overpower Engine Breakdown/Non-Function Due to Aftermarket Power-Up Devices vs Non Overpower Engine Non-Function of Pistons, Cylinders, Valvetrain Components, DTC P003A or P111D Set
08-06-04-006K
Service Bulletin/Repair Instructions
This informational bulletin provides information for Identifying Non-GM ECM Calibration Use and Power-up Hardware Detection in Duramax Diesel Engines - Photograph Tech 2 Calibration IDs, Calibration Verification Numbers (CVNs) and Transmission Data Screen
080604006K
Service Bulletin/Repair Instructions
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION FOR IDENTIFYING NON-GM ECM CALIBRATION USE AND POWER-UP HARDWARE DETECTION IN DURAMAX DIESEL ENGINES - PHOTOGRAPH TECH 2 CALIBRATION IDS, CALIBRATION VERIFICATION NUMBERS (CVNS) AND TRANSMISSION DATA SCREEN
09-06-04-026E
Service Bulletin/Repair Instructions
This informational bulletin provides information on Identifying Non-GM (Aftermarket) Engine Calibrations for Gasoline Engines Using Tech 2 or GDS 2
09-07-30-018C
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information on the change in automatic transmission add conditions documentation and claim submissions
12-00-89-007
Service Bulletin/Repair Instructions
This informational bulletin provides information on dealer responsibility for cargo carrying capacity labeling and the part numbers for the labels.
PI0373A
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a procedure for relearning the power folding mirriors and road testin to verify they correct a condtion of the power folding mirriors glass shakes, flutters at normal driving conditions.
PIP5068
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician abut vehicles that have a knock noise or vibration from the engine or transmission. Technician will need to inspect the flex plate. The flex plate and transmission bell housing should be replaced if the flex plate is found cracked.
PIP5009F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that the Malfunction Indicator Lamp is illuminated and the vehicle has a harsh 1-2 shift. Technician may find Diagnostic Trouble Code P0741 set in the Transmission Control Module. Technician will need to replace the torque converter clutch solenoid and wire harness with part number 24237980.
PIT3237F
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the percentage of Ultraviolet protection or tint offered by the windshield or side glass. Technician should be advised Windshield reduces Ultraviolet rays down to 4% or less. Front side door glass reduces Ultraviolet rays down to 35% or less. Windshields are SOLAR glass with a light transmittance of >/=70%. Front door glass are Solar glass with a light transmission of >/=70%. Rear door glass, quarter windows and back windows can use either Solar glass (>/=70%) or Privacy glass, which has a light transmittance of 20%.
PI0437A
Service Bulletin/Repair Instructions
This preliminary informational bulletin provides a procedure on how to clean overspray from chorme bumpers for concerns related to an apperance of discoloration or corrosion near edges/openings of chrome bumpers
PIC5759
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have a message on the radio "maximum number of phones are currently paired to the vehicle". Dealer should advise the customer this is normal operation of the vehicle due to the maximum number of five phones can be paired to a vehicle.
11-00-89-005B
Service Bulletin/Repair Instructions
This warranty administrational bulletin provides information on Clarification of Use - Dealer Empowerment Labor Operations and Customer Enthusiasm
07-00-89-037E
Service Bulletin/Repair Instructions
This warranty administrational bulletin provides information on courtesy transportation and roadside assistance programs offered through GM.
PIP5065A
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a ticking noise when driving above 30 miles per hour in third and fourth gear. Technician will need to replace the Reaction Carrier and the Low and Reverse Roller Clutch.
10-00-89-017V
Service Bulletin/Repair Instructions
This informational bulletin provides information on newly release bulletins used to fi the vehicles in the field the first time.
PIP5065
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that may have a ticking noise when driving above 30 miles per hour in third and fourth gear. Technician will need to replace the Reaction Carrier and the Low and Reverse Roller Clutch.
090730018C
Service Bulletin/Repair Instructions
Warranty Administration ? Change in Automatic Transmission Add Condition Documentation and Claim Submission
PI-0845
Service Bulletin/Repair Instructions
GMC/CHEVROLET: THERE MAY BE AN ACCUMULATION OF DIESEL PARTICULATE FILTER SOOT LEVEL FOUND WHEN A DIAGNOSTIC SYSTEM CHECK IS PERFORMED AND MAY BE CAUSED BY ENGINE CONTROL MODULE (ECM) WITH A REDUCED ENGINE POWER MESSAGE. MODEL 2011-2013 EXPRESS, SILVERADO; SAVANA, SIERRA. *PE
PIC5588A
Service Bulletin/Repair Instructions
Programming And Activation Of Replacement OnStar Modules.
PIT4648D
Service Bulletin/Repair Instructions
ABS Light and/or Service Stability Message On With DTC C0045 and/or C0050.
PI-0802
Service Bulletin/Repair Instructions
CHEVROLET/GMC: MALFUNCTION INDICATOR LAMP REGARDING FUEL GAUGE REGISTERING EMPTY OR INOPERATIVE AFTER HALF A TANK OF FUEL AND WILL BE CORRECTED WITH NEW COMPRESS NATURAL GAS (CNG) MODULE. MODEL 2012 EXPRESS, SAVANA. *PE
PI0690A
Service Bulletin/Repair Instructions
MIL Illuminated.
PI0802
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PI690A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIT-5122-C
Service Bulletin/Repair Instructions
GENERAL MOTORS: SERVICE STABILITY MESSAGE LOW POWER BRAKE LIGHT AND CRUISE CONTROL OPERATION- DTC C0161 AND/OR C0277. NEW FOR THE 2012 MODELS IS A DUAL BRAKE PEDAL POSITION (BPP) SENSOR (TWO SENSORS IN ONE). THE DUAL BPP REPLACES THE OLD STYLE OPEN/CLOSED BRAKE SWITCH WHICH HAS BEEN USED FOR YEARS. *JS MODELS 2012-13 ALL ESCALADES; AVALANCHE, EXPRESS, SILVERADO, SUBURBAN, TAHOE; SAVANA, SIERRA, ALL YUKONS AND DENALIS. UPDATED 11/28/12. *PE
PIT5122D
Service Bulletin/Repair Instructions
Stability Message Low Power Brake Light And Cruise Control Operation.
SB-PIP-5059
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PI-0759
Service Bulletin/Repair Instructions
GM-EXPRESS/SILVERADO/SAVANA/SIERRA: DUE TO POOR CONNECTIONS AND INTERMITTENT CONDITION OF MAP SENSOR CONNECTOR WIRING HARNESS TERMINAL CRIMPS, TRUCKS HAVE A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION AND REDUCED ENGINE POWER DISPLAY MESSAGE. *PE
PI-0773
Service Bulletin/Repair Instructions
CADILLAC/CHEVROLET/GMC/HUMMER/PONTIAC: THERE IS SLIPPING OR HAVE NO FOURTH, FIFTH OR SIXTH GEAR AND MALFUNCTION INDICATOR LAMP (MIL) WOULD BE ON, WITH DIAGNOSTIC TROUBLE CODE (DTC) P0796 FOUND AS ACTIVE. *PE
PIP-5031
Service Bulletin/Repair Instructions
GMC/CHEVROLET: SOME TRUCKS, EQUIPPED WITH AUTOMATIC TRANSMISSION 4L60E, MAY EXPERIENCE SLIPPING, MISSED OR LATE SHIFTS IN 3RD AND 4TH GEARS DUE TO POSSIBLE 3-4 CLUTCH DISTRESS. *PE
PIP-5009-D
Service Bulletin/Repair Instructions
GMC/CHEVROLET: MALFUNCTION INDICATOR LAMP (MIL) IS ILLUMINATED AND HAS A HARSH SHIFT 1-2. THE TCC ENABLE SOLENOID AND WIRE HARNESS SHOULD BE REPLACED WHEN REPAIRS ARE PERFORMED ON TRANSMISSION. *PE
PIP-4942
Service Bulletin/Repair Instructions
CHEVROLET/GMC: AT HIGH PRESSURE PUMP TO HIGH PRESSURE FUEL LINES THERE ARE SIGNS OF FUEL LEAKAGE AND/OR FUEL ODOR. *PE UPDATED ON 5/2/2012. *KB
PI-0671
Service Bulletin/Repair Instructions
GENERAL MOTORS: RESERVOIR FOR POWER STEERING FLUID IS HEAT DAMAGED AND LEAKING. MAY CAUSED PROBLEMS WITH POWER STEERING PUMP. *PE
PIE-0201
Service Bulletin/Repair Instructions
CHEVROLET/GMC: WHEN HVAC SYSTEM IS TURNED ON , THERE IS NO AIR FLOW AND THE BLOWER MOTOR IS INOPERATIVE. *PE
PI-0585
Service Bulletin/Repair Instructions
CHEVROLET/GMC: BULLETIN PROVIDING INFORMATION REGARDING AVAILABILITY OF FRONT SIDE DOOR LATCH/LOCK AS A SEPARATE PART. *PE
030232003
Service Bulletin/Repair Instructions
STEERING NOISE WHEN TURNING LEFT. *TT UPDATED 3/4/11. *PE UPDATED ON 6/30/2011. *KB
PI-0234
Service Bulletin/Repair Instructions
CHEVROLET/GMC: DISABLE AUTO DOOR LOCKING FOR EMERGENCY RESPONSE VEHICLES. IN ORDER TO DISABLE THE AUTO DOOR LOCKING FUNCTION, IT IS NECESSARY TO REPROGRAM THE BCM. *PE UPDATED ON 06/27/2011. *KB
PI-0334
Service Bulletin/Repair Instructions
GM: THE DOME LIGHT IS INOPERATIVE. THE AIR BAG LIGHT IS ON AND THE DOOR AJAR LIGHT IS ON. THIS IS LIKELY CAUSED BY A WIRING HARNESS. *RM UPDATED ON 6/27/2011. *KB
SB-09-03-09-002A
Service Bulletin/Repair Instructions
GM: THERE IS A NOISE FROM THE REAR OF THE VEHICLE DURING ACCELERATION AND IS FROM METAL TO METAL CONTACT OF BUSHINGS. 2006-2012 EXPRESS/SAVANA. *RM
SB-10-04-17-001A
Service Bulletin/Repair Instructions
GM: 2010-2012 EXPRESS/SAVANA. THERE IS A TRANSMISSION FLUID LEAK AT THE REAR OF THE TRANSMISSION. THERE IS A MISSING PLUG. *RM
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.