PIP5601C
Service Bulletin/Repair Instructions
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
PIP5601C
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
PIT5074R
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.
02-00-89-002X
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
PIT3271P
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
General Communication
Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
01-06-01-011P
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
24-NA-141
GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
16-NA-383
This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
18-NA-099
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
24-NA-098
This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
08-07-30-035H
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
09-00-89-008G
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
13-08-116-001J
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
10-08-45-001H
This bulletin provides information for electrical ground repairs using new General Motors replacement fasteners with conductive finish.
22-NA-074
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
16-NA-338
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only.
02-08-42-001J
This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
PI1394B
This PI bulletin advises the technician on the proper way to install the pistons in an engine.
23-NA-219
This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
03-00-91-001I
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns.
01-06-01-011O
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
17-NA-170
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
02-00-89-002W
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
10-00-89-006J
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
07-08-49-020R
This informational bulletin provides information for the IPC odometer programming method quick reference guide.
23-NA-153
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
18-NA-073
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
01-06-01-011N
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
13-08-116-001I
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
02-00-89-002V
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
19-NA-219
This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
08-07-30-035G
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
22-NA-009
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
17-NA-073
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
01-08-42-001O
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
02-00-89-002U
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only).
09-00-89-008F
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process.
21-NA-124
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
PIT3271N
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
20-NA-138
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
22-NA-205
This service bulletin provides information on Module Harvesting.
10-00-89-006I
This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
22-NA-195
This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada.
06-00-89-031H
This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
13-08-116-001H
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
01-06-01-011M
This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
22-NA-181
This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
20-NA-065
This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
12-00-89-003B
This service bulletin provides policy information on warranty administration guidelines for multiple repairs with independent causes (GM Canada Dealers Only).
01-00-89-010P
This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
PIT3271M
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIT3271K
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
16NA383
This informational bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
070849020M
IPC Odometer Programming Method Quick Reference Guide
150089004B
Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
150089005A
Essential Tools that Include Consumable Parts (U.S. Only)
GCUS-9-3664
16188 Special Coverage. Some vehicles may have a condition where increased resistance in the body control module (BCM) connection system can result in voltage fluctuations or intermittency in the brake apply sensor (BAS) circuit that can cause brake lamp malfunction. Specifically, the brake lamps may either illuminate without the brake pedal applied, or turn off when the pedal is applied. If this condition occurs within the stated terms, dealers will attach the wiring harness to the BCM with a spacer, apply dielectric lubricant to the BCM X2 (C2) connector and the BAS harness connector, and relearn the brake pedal home position. The repairs will be made at no charge to the customer.
PIT5074J
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT THE USE OF J-35616-64B TERMINAL TEST PROBE, REPLACEMENT TERMINALS, AND TERMINATED LEADS. THE J-35616-64B IS THE LATEST TEST PROBE RELEASED FOR CHECKING TENSION OR PROBING THE .64 SERIES TERMINALS. THE TEST PROBE TERMINAL HAS BEEN RELEASED IN THE TERMINAL REPAIR KIT (J-38125-620H) LOCATED IN LEAR TRAY 7 PART NUMBER 963716-2. THERE ARE 5 TERMINATED LEADS IN A PACKAGE PART NUMBER IS 13505346, WHICH CAN BE ORDERED THROUGH YOUR NORMAL GENERAL MOTORS CUSTOMER CARE AND AFTERSALES PARTS CHANNEL
PI1394A
THIS INFORMATIONAL BULLETIN PROVIDES ADDITIONAL INFORMATION ON HOW TO INSTALL PISTONS AND SUGGEST WHAT TOOLS TO USE.
16NA260
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS.
PIP4786C
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE LOW OIL PRESSURE MESSAGE. TECHNICIAN MAY ALSO FIND A DIAGNOSTIC TROUBLE CODE P0521 IN THE ENGINE CONTROL MODULE. TECHNICIAN SHOULD FOLLOW ALL PUBLISHED SERVICE INFORMATION DIAGNOSIS. WHEN USING A SCAN TOOL IF THE OIL PRESSURE IS LOW BUT THE OIL PRESSURE AT THE OIL FILTER HOUSING IS CORRECT, TECHNICIAN SHOULD INSPECT THE VALVE LIFTER OIL FILTER FOR DEBRIS/SLUDGE THAT COULD BE RESTRICTING OIL FLOW TO THE OIL PRESSURE SENSOR. TECHNICIAN SHOULD REMOVE THE VALVE LIFTER OIL FILTER AND CLEAN IT. IF THE VALVE LIFTER OIL FILTER CANNOT BE CLEANED REPLACE IT.
030603004R
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION ON HOW TO TEST A BATTERY AND WHAT IS NEEDED TO WARRANTY A BATTERY.
000601012F
THIS INFORMATIONAL BULLETIN PROVIDES INFORMATION TO GM DEALERS ON THE CORRECT CLEANING METHODS WHEN CLEANING ENGINE GASKET SEALING SURFACES.
030604017I
THIS INFORMATIONAL BULLETIN EXPLAINS THE USE OF DIESEL FUEL ADDITIVES IN AN ENGINE, ARE NOT REQUIRED UNLESS THE CUSTOMER DESIRES ADDITIVES TO PREVENT FUEL CONCERNS DEPENDING ON FUEL OR TEMPERATURE RELATED CONDITIONS.
000601026I
THIS INFORMATIONAL BULLETINS PROVIDES INFORMATION ON THE INTAKE MANIFOLD INSPECTION/REPLACEMENT AFTER SERVERE INTERNAL ENGINE DAMAGE.
PIP5094A
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THAT ,WHEN TESTING ANY CIRCUIT FOR OPEN OR RESISTANCE, IT IS IMPERATIVE THAT ALL RELATED TERMINAL PIN FIT AND TENSION BE CHECKED WHEN THE TEST STEPS REQUIRE DISCONNECTION OF THE CONNECTOR OR COMPONENT, PRIOR TO ANY COMPONENT REPLACEMENT. ALWAYS USE THE RECOMMENDED TERMINAL TEST TOOL DURING THESE TESTS.
PIT5485B
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN IF UNABLE TO PLACE AN ONSTAR CALL IN THE IGNITION ON MODE AFTER THE ONSTAR CANADA UPGRADE, TO CONTACT THE GM TECHNICAL ASSISTANCE CENTER ONSTAR GROUP FOR FURTHER ASSISTANCE.
PIC5088F
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON THE STEPS TO DIAGNOSE AND REPAIR THE CONCERN. THE VEHICLE'S XM RADIO ONLY HAS XM PREVEIW CHANNELS.
PIC-4935-E
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO HELP THE DEALERSHIP TECHNICIANS PERFORM A PARASITIC DRAIN TEST FOR THE ONSTAR MODULE. WHEN PERFORMING BATTERY PARASITIC DRAIN TEST, THERE MAY BE SOME CONFUSION AS TO WHAT THE NORMAL POWER CONSUMPTION READING SHOULD BE FROM THE ONSTAR SYSTEM.
PIC-5050-A
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON REPAIRING THE CONCERN. A CUSTOMER MAY IDENTIFY A CONCERN OF UNABLE TO REACTIVATE A VEHICLE'S ONSTAR THAT HAS BEEN PREVIOUSLY DISABLED BY ONSTAR. DEALER IS TO CALL GENERAL MOTORS TECHNICAL ASSISTANCE CENTER FOR FURTHER ASSISTANCE IF THE CONCERN IS STILL PRESENT.
PIC4935E
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO HELP THE DEALERSHIP TECHNICIANS PERFORM A PARASITIC DRAIN TEST FOR THE ONSTAR MODULE. WHEN PERFORMING BATTERY PARASITIC DRAIN TEST, THERE MAY BE SOME CONFUSION AS TO WHAT THE NORMAL POWER CONSUMPTION READING SHOULD BE FROM THE ONSTAR SYSTEM.
PIC5050A
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON REPAIRING THE CONCERN. A CUSTOMER MAY IDENTIFY A CONCERN OF UNABLE TO REACTIVATE A VEHICLE'S ONSTAR THAT HAS BEEN PREVIOUSLY DISABLED BY ONSTAR. DEALER IS TO CALL GENERAL MOTORS TECHNICAL ASSISTANCE CENTER FOR FURTHER ASSISTANCE IF THE CONCERN IS STILL PRESENT.
PIT5389A
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN ON THE STEPS FOR DIAGNOSING THE CONCERN. THE VEHICLE MAY BE UNABLE TO CONNECT TO ONSTAR USING THE WHITE, BLUE OR RED ONSTAR BUTTONS.
PIT5485A
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN, IF UNABLE TO PLACE AN ONSTAR CALL IN THE IGNITION ON MODE AFTER THE ONSTAR CANADA UPGRADE TO CONTACT THE GM TECHNICAL ASSISTANCE CENTER ONSTAR GROUP FOR FURTHER ASSISTANCE.
PIC-5260-A
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON DIAGNOSING THE CONCERN. VEHICLE'S SUNROOF OPERATION INTERMITTENT, BIND, NOISE, AUTO-REVERSE, AND/OR WATER LEAKS.
PIC5260A
THIS PRELIMINARY INFORMATION COMMUNICATION ADVISES THE TECHNICIAN THE STEPS ON DIAGNOSING THE CONCERN. VEHICLE'S SUNROOF OPERATION INTERMITTENT, BIND, NOISE, AUTO-REVERSE, AND/OR WATER LEAKS.
06-00-89-031D
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
15-NA-079
OnStar® Voice Fallback Number Update Some customers may have received a letter from OnStar® stating that "We recently tried to provide a software update to the OnStar® hardware in your vehicle. However, your system could not be updated remotely. As a result, some of your OnStar® system functions may not be working as expected." The customer is further instructed in this letter to "Please contact your dealer or any dealer near you as soon as possible to schedule an appointment for this no-cost software update. Your dealer will reprogram your OnStar® module with an update. This is for vehicles that have previously received the Canada upgrade as described in Service Bulletin #15-08-44-001F."
SB-15-08-45-001
PONTIAC/SATURN/CHEVROLET: SOME VEHICLES ARE EXPERIENCING MULTIPLE ISSUES/SYMPTOMS CAUSED BY BODY HARNESS HARD CONTACT AGAINST FLOOR EDGE PANEL UNDER LEFT REAR SEAT CUSHION. MODEL 2004-12 MALIBU, MALIBU MAXX, 2007-09 AURA, 2005-10 G6. *PE
14327
14327 - SPECIAL COVERAGE. SOME VEHICLES MAY HAVE BEEN BUILT WITHOUT A STEERING GEAR UMBRELLA SEAL. WITHOUT THE SEAL, WATER AND DIRT MAY ENTER THE SYSTEM AND COULD CAUSE THE RACK AND PINION PARTS TO CORRODE. IF CORROSION EXISTS, THE FEEL OF THE STEERING WHEEL WILL BE LOOSE. IF THE SYSTEM IS NOT SERVICED WHEN THE PARTS BECOME LOOSE TO THE FEEL, THEN THE PARTS COULD FAIL, RESULTING IN THE STEERING WHEEL SPINNING FREELY. DEALERS ARE TO REPLACE THE STEERING GEAR.
PIT3271G
THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT CHANGING THE TIRE AND WHEEL SIZE ON VEHICLES. GENERAL MOTORS WILL ONLY SUPPORT A TIRE CALIBRATION FOR TIRES THAT HAVE BEEN SIZED, TESTED AND DESIGNED FOR THE VEHICLE IN QUESTION AND ITS APPLICATIONS. TECHNICIAN SHOULD NOT USE THE INFORMATION THAT IS PROVIDED BY THE ANTILOCK BRAKING SYSTEM TIRE SIZE SELECTION.
14152D
Transmission Shift Cable Fracture
PIT5074H
J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
PIT5099A
A/C Blows Warm Or Poor Performance.
PIT5264B
Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
PIT5353
XM Audio Traffic And Travel Link Availability And Operation.
14116
Electric Power Steering Assist
14152B
Transmission Shift Cable Fracture
08-05-22-009D
This bulletin directs to 08-05-22-009C
Recalls
Vehicle Recalls
14152A
Transmission Shift Cable Fracture
PIC5588B
Programming And Activation Of Replacement OnStar Modules.
SB-0000191931-A
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-0000188787-A
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
PIT4864F
Information On Requests To Add OnStar Bluetooth Option.
PIT5264
Canadian Customers Unable To Place Calls In The United States
99-08-51-007F
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
PI0281D
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
130089009
Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
PI0373A
THIS PRELIMINARY INFORMATIONAL BULLETIN PROVIDES A PROCEDURE FOR RELEARNING THE POWER FOLDING MIRRIORS AND ROAD TESTIN TO VERIFY THEY CORRECT A CONDTION OF THE POWER FOLDING MIRRIORS GLASS SHAKES, FLUTTERS AT NORMAL DRIVING CONDITIONS.
PIC5588A
Programming And Activation Of Replacement OnStar Modules.
SB-10183
SATURN PONTIAC CHEVROLET SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SPECIAL COVERAGE ADJUSTMENT-POWER STEERING ASSIST. SOME VEHICLES EQUIPPED WITH ELECTRIC POWER STEERING MAY EXPERIENCE A LOSS OF POWER STEERING ASSIST CAUSED BY ELECTRICAL INPUT SIGNALS WITHIN THE STEERING COLUMN ASSEMBLY. *PE UPDATED 6/18/2012 *JS
PIT-3749D
GM: ON SOME TRUCK MODELS THERE IS SOME FRAME CORROSION. *RM UPDATED ON 5/2/2012. *KB
05-09-40-002E
GM: SERVICE BULLETIN EXPLAINING WHEN THE SAFETY BELTS ARE SUPPOSED TO LOCK. *RM UPDATED 12/6/11. *PE
PIC-4658
ADJUSTABLE PEDALS WILL NOT ADJUST INOPERATIVE. *NJ UPDATED 3/13/09. *PE UPDATED 8/1/11. *PE
SB-08-05-22-009A
CHEVROLET/PONTIAC/SATURN: INTERMITTENTLY BRAKE LIGHTS (STOP LAMPS) DO NOT FUNCTION CORRECTLY, EXTENDED TRAVEL TO SHIFT OUT OF PARK, CRUISE CONTROL INOPERATIVE, DTCS C0161/C0277 SET (PERFORM REPAIR AS OUTLINED). *PE UPDATED 5/11/11. *PE
060232002
NORMAL OPERATING CHARACTERISTICS OF ELECTRIC POWER STEERING (EPS) SYSTEM DURING EXTENDED LOCK-TO-LOCK (MAXIMUM STEERING WHEEL ROTATION) USAGE. *TT UPDATED 3/30/11. *PE
08-02-32-005
LOSS OF POWER STEERING ASSIST, POWER STEERING WARNING MESSAGE DISPLAYED IN DIC, IPC/RADIO DISPLAYS ERRATIC, DTC C0900, B1325 SET (REPLACE IGNITION COIL/MODULE ASSEMBLY AND ADD GROUND STRAP). VEHICLES WITH 3.5L ENGINE. *PE UPDATED 3/25/11. *PE
SB-09-02-35-006
CHEVROLET/PONTIAC/SATURN: STEERING COLUMN TILT WHEEL RELEASE LEVER INOPERATIVE/BROKEN (REPLACE TILT WHEEL RELEASE LEVER KIT AND/OR RELEASE LEVER RETAINER (TILT TEETH)). *PE
SB-07-06-04-023A
CHEVROLET/SATURN: DIFFICULTY FILLING FUEL TANK, MIL/SES LIGHT ILLUMINATED DTC P0446 - EVAPORATIVE EMISSIONS (EVAP) VENT SYSTEM PERFORMANCE (INSPECT/CLEAN EVAP CANISTER VENT VALVE SOLENOID AND INSTALL SCREEN). *PE
SB-09-06-04-007A
SATURN/PONTIAC/CHEVROLET: THE FUEL GAUGE DOES NOT RISE ABOVE THE 3/4 MARK AFTER A FILL UP OR THE FUEL GAUGE APPEARS STUCK. AN ILLUMINATION OF THE CHECK ENGINE LIGHT. ON RARE OCCASIONS, THE FUEL GAUGE DOES NOT READ THE CORRECT LEVEL WHICH MAY RESULT IN A NO START CONDITION DUE TO A LOW FUEL LEVEL. *PE
PIC--4330B
CHEVROLET: UNABLE TO RELEARN THE BRAKE PEDAL POSITION (BPP) SENSOR. *PE
08089-B
GENERAL MOTORS CORP: SPECIAL COVERAGE ADJUSTMENT; ANALOG ONSTAR DEACTIVATION. *PE UPDATED 2/17/09. *PE
08-089B
BUICK CHEVROLET GMC SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SPECIAL COVERAGE ADJUSTMENT-ANALOG ONSTAR DEACTIVATION. CSC LETTER WAS RECEIVED. *PE
PIC-4330A
GMC: UNABLE TO RELEARN THE BRAKE PEDAL POSITION (BPP) SENSOR. HAVE DIFFICULTY PERFORMING THE BRAKE PEDAL POSITION (BPP) RELEARN. MODELS CHEVROLETS, PONTIACS AND SATURNS. *PE
08-089
BUICK CADILLAC CHEVROLET GMC HUMMER OLDSMOBILE PONTIAC SAAB SATURN SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SPECIAL COVERAGE ADJUSTMENT-ANALOG ONSTAR DEACTIVATION. FCC RULED IN 2002 WIRELESS CARRIERS WOULD NO LONGER RE REQUIRED TO SUPPORT ANALOG WIRELESS NETWORK STARTING IN 2008. *PE CSC LETTER WAS RECEIVED. UPDATED 12/1/08. *PE
060232007
CLUNK, KNOCK OR RATTLE NOISE FROM FRONT OF VEHICLE WHILE DRIVING OR TURNING OVER BUMPS AT LOW SPEEDS. *KB (DIAGNOSE NOISE - LUBRICATE INNER AND OUTER STEERING SHAFT, REPOSITION I-SHAFT, ADD FOAM TO RADIATOR SURGE TANK MOUNTING BRACKET AND/OR REPLACE STEERING GEAR, IF NECESSARY). UPDATED 5/15/08. *NJ
07126
CHEVROLET PONTIAC SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. SPECIAL COVERAGE ADJUSTMENT - LOSS OF POWER STEERING ASSIST. *NJ
3170
SERVICE ENGINE SOON LIGHT ON AND OR VARIOUS ELECTRICAL CONCERNS. *EH UPDATED 1/29/08. *NJ
060842004
FRONT PARK/TURN/DRL OR REAR STOP/TURN/TAIL LAMP INOPERATIVE. (REPLACE BULB AND INSPECT SOCKET) *TT UPDATED. *KB UPDATED 11/02/07 *NJ
060601014
L36, L67, L26, L32, LA1, LX9, MN7, M15. TICKING OR KNOCKING TYPE NOISE COMING FROM THE ENGINE OR TRANSMISSION AREA. *KB
060849016
INSTRUMENT PANEL CLUSTER (IPC) BACKLIGHTING INOPERATIVE DURING DAYLIGHT HOURS. *KB
05094
SUN VISOR MIRROR COVER NONNFUNCTIONAL/BREAKAGE. *AK
050601005A
WHISTLE TYPE NOISE COMING FROM ENGINE. *TT
0508110005
SUNSHADE MIRROR COVER BREAKS OFF AT THE HINGE PINS. *TT
050846006A
INFORMATION ON UPGRADING CERTAIN ONSTAR GENERATION 5 ANALOG/DIGITAL-READY SYSTEMS TO ONSTAR GENERATION 6 DUAL-MODE (ANALOG/DIGITAL). *TT
05548A
PROGRAM BULLETIN (CUSTOMER SATISFACTION PROGRAM)-ENGINE HARMONIC BALANCER NOT SEATED. *SC
708
LOOSE SHIFT KNOB. *SC
050235001
STEERING COLUMN TILT/TELESCOPE WHEEL LEVER AVAILABLE FOR SERVICE USE. *TT
01172005
REAR DOOR DOES NOT STAY CLOSED IN COLD WEATHER. *TT
050850002
FRONT SET HEAD RESTRAINT UNCOMFORTABLE, POSITIONED TOO FAR FORWARD. *TT
050853001
FRONT SEAT REAR TRIM PANELS FALLING OFF. *TT
040849025
FUEL GAUGE DOES NOT READ FULL WHEN FUEL TANK IS FULL, SERVICE ENGINE SOON (SES) LIGHT ON, DIAGNOSTIC TROUBLE CODE (DTC) P0455. *TT
040306001
VEHICLE LEADS/PULLS CHARACTERISTICS AND DIAGNOSIS. *TT
08232004
INSTRUMENT PANEL FUEL GAUGE WILL ONLY GO TO 7/8THS FULL EVEN WITH A FULL TANK OF FUEL OR THAT CAN ONLY ADD 12 OR 13 GALLONS OF FUEL TO TANK AFTER THE LOW FUEL LIGHT COMES ON. *TT
0408110004
REAR SUNSHADE COMES UNHOOKED FROM REAR SUNROOF TRIM. *TT THIS BULLETIN REPLACES PREVIOUS BULLETIN NUMBER 04-08-110-004. *TT
3088A
FUEL GAUGE NOT READING FULL AFTER A CUSTOMER FILL. *SC
3075
REAR LIFT GATE CLOSING EFFORT. *TT
3159C
SIR LIGHT ON WITH CODES B0012.0E AND B0013.0E. *TT
3161
OUTSIDE AIR TEMPERATURE DISPLAY INACCURATE AT TIMES. *TT
3170E
IPC, INTERIOR LIGHTS AND/OR HEADLAMPS FLICKER. *AK FB2
3205
REAR DEFOGGER INOPERATIVE AFTER PERFORMING REMOTE VEHICLE START. *EH
3253
VEHICLE WILL NOT MOVE IN EITHER DIRECTION. TRANSMISSION MAY SHOW OVER FULL. P90 4T40E 4T45E NO MOVEMENT DRIVE OR REVERSE. CONVERTER MAY BE EMPTY OF FLUID. *TT
3261B
(RETAINED ACCESSORY POWER) RAP DEACTIVATES FROM DRIVERS DOOR ONLY. *TT
3277
POWER MIRRORS WORKING OPPOSITE OF THE SWITCH DIRECTION. *TT
3332B
DIAGNOSTIC TROUBLE CODE P0404 EGR CONCERN. *TT
3349A
BATTERY DRAW ADDITIONAL INFO. *TT
3385A
REPEATED PARK LPS FUSE OPEN (ADDITIONAL INFORMATION). *TT
3393
BACKLIGHTING IS INOPERATIVE DURING DAYLIGHT CONDITIONS (HEADLIGHT SWITCH TURNED ON MANUALLY). *TT
3393A
BACKLIGHTING IS INOP DURING DAYLIGHT CONDITIONS (HEADLIGHT SWITCH TURNED ON MANUALLY) *SC
3399
ENGINE CRANKS BUT WILL NOT START. *SC
3441
4T40E/4T45E HARD TO SHIFT. *TT
3447
4T40E OR 4T45E WILL NOT SHIFT NO DIAGNOSTIC TROUBLE CODES. *TT
3649
INTERMITTENT LONG CRANK BUT WILL NOT START OR INTERMITTENT NO CRANK. *TT
3786
NO START AFTER ENGINE HARNESS REPLACEMENT (NON-ABS). *TT
3797
INTERMITTENT STEERING WHEEL DITHER AFTER FRONT END ALIGNMENT WAS PERFORMED. *TT
4127
LOSS OF POWER STEERING ASSIST AT HIGH ENGINE RPM. *TT UPDATED 08-15-07. *KB UPDATED ON 10/03/07. *NJ
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.