17-NA-073
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
17-NA-073
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
PIP4723F
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIP4723D
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
19NA273
This informational bulletin provides information for dealers/technicians on Procedures to Unlock Delco Radio with Theftlock.
PIC4696E
This Preliminary Information communication provides information to the technician on how to unlock radios that are Delco TheftLock. Technician will use the radio to get the scrambled code. Technician will need to contact the radio unlock center to retrieve the unlock code from the scrambled code. The PI update to version D is to advise the unlock procedure is temporarily unavailable. E version update is to add administrative details.
17NA073
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
PIC4696D
This Preliminary Information communication provides information to the technician on how to unlock radios that are Delco TheftLock. Technician will use the radio to get the scrambled code. Technician will need to contact the radio unlock center to retrieve the unlock code from the scrambled code. The PI update to version D is to advise the unlock procedure is temporarily unavailable.
PIC4696C
This Preliminary Information communication provides information to the technician on how to unlock radios that are Delco Theft Lock. Technician will use the radio to get the scrambled code. Technician will need to contact the radio unlock center to retrieve the unlock code from the scrambled code.
PIP4723C
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
PIP4723B
This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
16NA260
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS.
PIC4696B
This Preliminary Information communication provides information to the technician on how to unlock radios that are Delco TheftLock. Technician will use the radio to get the scrambled code. Technician will need to contact the radio unlock center to retrieve the unlock code from the scrambled code.
PIP5346
This Preliminary Information communication provides information to the technician about cooler line fittings that come with the 4T65E General Motors remanufactured transmission may not be the same as Original equipment manufacturer quick connect verses inverted flare. Dealer will need to contact General Motors Technical Assistance Center for further assistance.
PIC4696A
This Preliminary Information communication provides information to the technician on how to unlock radios that are Delco TheftLock. Technician will use the radio to get the scrambled code. Technician will need to contact the radio unlock center to retrieve the unlock code from the scrambled code.
Recalls
Vehicle Recalls
05-06-04-035D
This informational bulletin provides the technician with information on what E85 fuel may due to a non E85 vehicle.
99-08-51-007F
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
PI0281D
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
130089009
Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
PIP3720D
This Preliminary Information communication provides information to the technician with the axel setup information from American Axle Manufacturing. Technician should be advised that the maximum pinion shim to be used or stacked behind the pinion is 0.050?, and the minimum pinion shim is 0.020? for an 8.6 axle. The range for available pinion depth shims for the 10.5? axle is 0.006? to 0.024?. When setting the backlash it should be set between 0.003? to 0.005? on a new ring and pinion for any American Axle Manufacturing application. The ring and pinion can be reused or adjusted if the mileage is less than 500 miles, if not used for towing. Technician should be advised that a ?roller coaster? or ?hourglass? pattern on the bearings may be normal up to 10,000 miles and possibly longer. With a mis-machined housing you may get a heel pattern on both sides of the gear teeth at build up can generally be corrected with backlash adjustments. When setting up an 8.6? axle with a 5 cut gear set is to use a 0.035? pinion shim and set backlash to 0.004?. When using the newer 2 cut gear set also use a 0.035? pinion shim and still set backlash to 0.004?. To set the gear pattern use backlash to adjust the pattern heel to toe. Use the pinion shim to adjust the height of the pattern. The proper drive pinion bearing pre-load is from 15 - 30 inch pounds with new bearings. The total torque to turn after the differential case is installed should increase 5 - 10 inch pounds at the pinion. A new pinion nut must be used whenever the old one is removed. The axle shaft end play specification is 0.012? per side and the radial specification is 0.002? - 0.003?. Technician should be advised that synthetic lube can be used in all new American Axle Manufacturing axle assemblies. The new pinion seal for the 8.6? axle assembly is a two piece design.
06186
SPECIAL COVERAGE ADJUSTMENT - FRONT SUSPENSION CROSSMEMBER CORROSION. *NJ
000089008E
SOME CUSTOMERS MAY WANT TO TOW THEIR VEHICLE BEHIND ANOTHER VEHICLE WITH ALL FOUR TIRES ONT HE GROUND. THIS BULLETIN PROVIDES INFORMATION REGARDING RECREATIONAL (DINGHY) TOWING FOR CERTAIN VEHICLES INCLUDING 1988-2004 CHEVROLET AND GMC LIGHT DUTY TRUCKS. *TT
010863004
CREAKING OR POPPING TYPE SOUND FROM FRONT END OR SUSPENSION WHEN DRIVING OVER BUMPS OR IN TIGHT TURNS. *TT
01513
REPLACEMENT KEYS FOR ROOF RACK CROSS RAILS. *TT
01832
372LE AUTOMATIC TRANSMISSION NO FIRST GEAR. *MR
010601015A
SOME CUSTOMERS MAY COMMENT ON A FRAYED SERPENTINE BELT AND/OR BELT SQUEAL. *TT
000089008B
SOME CUSTOMERS MAY WANT TO TOW THEIR VEHICLE BEHIND ANOTHER VEHICLE WITH ALL FOUR TIRES ONT HE GROUND. THIS BULLETIN PROVIDES INFORMATION REGARDING RECREATIONAL (DINGHY) TOWING FOR CERTAIN VEHICLES INCLUDING 1988-2004 CHEVROLET AND GMC LIGHT DUTY TRUCKS. *TT
000601006D
A TICK TYPE NOISE COMING FROM THE ENGINE WHILE THE ENGINE IS RUNNING DURING COLD OR HOT OPERATION. *TT
000601006C
A TICK TYPE NOISE COMING FROM THE ENGINE WHILE THE ENGINE IS RUNNING DURING COLD OR HOT OPERATION. *TT
030523001
BRAKE PULSATION / VIBRATION, CONTAMINATION / CORROSION BETWEEN HUB AND ROTOR AND / OR DRUM AND AXLE FLANGE. *TT
990730016A
DIAGNOSTIC INFORMATION FOR INTERMITTENT TRANSMISSION DOWNSHIFT, SLIP, BUSY/CYCLING TCC OR NOISY COOLING FAN. *TT
000601006B
A TICK TYPE NOISE COMING FROM THE ENGINE WHILE THE ENGINE IS RUNNING DURING COLD OR HOT OPERATION. *TT
020864004
SOME CUSTOMERS MAY COMMENT THAT ONE OR MORE WINDOWS BINDS OR TO TIPS FORWARD WHEN OPENING. *JG
050202
SOME CUSTOMERS MAY COMMENT THAT THE RIGHT END OR LEFT FRONT WINDOWS TIP FORWARD WHEN BEING RAISED AND HAVE A TENDENCY TO BIND IN THE WINDOW CHANNEL. *TT
020845001
SOME CUSTOMERS MAY COMMENT THAT THE DOME LAMP CANNOT BE TURNED ON MANUALLY BUT IT WILL TURN ON WHEN A DOOR IS OPENED. *JG
290102
SOME CUSTOMERS MAY COMMENT ON VARIOUS CHARACTERISTICS OF THE CRUISE CONTROL OPERATION. *TT
071201
SOME CUSTOMERS MAY COMMENT ABOUT THE DOME LAMP ON 1999 THROUGH CURRENT CHEVROLET TRACKERS BEING INOPERATIVE EXCEPT WHEN A DOOR IS OPEN. *TT
010235007
INFORMATION REGARDING IGNITION KEY BINDING IN ACCESSORY POSITION. *YH
260901
SUBJECT REGARDING VEHICLES WITH AUTOMATIC TRANSMISSIONS, THE IGNITION KEY MAY BIND IN THE ACCESSORY POSITION. *SLC
220801
INFORMATION REGARDING VEHICLES WITH AN AUTOMATIC TRANSMISSION AND AN IGNITION SWITCH WHERE THE KEY BINDS IN THE ACCESSORY POSITION. *JG
070801
SOME VEHICLES MAY COMMENT THAT THE IGNITION KEY BINDS IN THE ACCESSORY POSITION. *SLC
230701
SOME CUSTOMERS MAY COMMENT THAT THE IGNITION KEY GETS STUCK WHEN MOVING THE KEY FROM THE ACCESSORY POSITION TO THE LOCK POSITION. *TT
010138008
SOME CUSTOMERS MAY COMMENT THAT THE HVAC SYSTEM IS NOT WORKING CORRECTLY. WHEN THE CONTROL IS MOVED TO THE DOWN OR FLOOR (HEAT) POSITION, AIR CONTINUES TO FLOW FROM THE END VENTS OF THE DASH. NLM
000089008A
SOME CUSTOMERS MAY WANT TO TOW THEIR VEHICLE BEHIND ANOTHER VEHICLE WITH ALL FOUR TIRES ONT HE GROUND. THIS BULLETIN PROVIDES INFORMATION REGARDING RECREATIONAL (DINGHY) TOWING FOR CERTAIN VEHICLES INCLUDING THE 1996 THROUGH 2000 TOYOTA CAVALIER. *TT
010601015
SOME CUSTOMERS MAY COMMENT ON A FRAYED SERPENTINE BELT. *TT
010419003
SOME CUSTOMERS MAY COMMENT ON A HARSH CLUNK OR POPPING NOISE COMING FROM THE FRONT AXLE. *TT
010201
SUBJECT REGARDING VEHICLES WITH FOUR-WHEEL DRIVE THAT ARE DIFFICULT TO SHIFT FROM TWO HIGH TO FOUR HIGH. *TT
010417002
EXPERIENCING DRIVELINE VIBRATION AT SPEEDS BETWEEN 56-97 KM/H (35-60 MPH). *TT
010604010
SUBJECT REGARDING PRODUCT ENHANCEMENTS TO IMPROVE SLOW / NO START CONDITIONS IN EXTREME COLD WEATHER. *TT
240101
SUBJECT REGARDING IGNITION SWITCH LOCK REPLACEMENTS. *TT
200101
SUBJECT REGARDING REPLACEMENT KEY TO LOCKING ROOF RACK CROSS RAILS. *TT
120101
SUBJECT REGARDING COMMENTS OF FRAYED SERPENTINE BELTS, BELTS THAT JUMP GROOVES, SQUEAKING AND SECREECHING BELTS. *TT
080101
CUSTOMERS MAY COMMENT ON THE EXCESSIVE AMOUNT OF EFFORT NEEDED TO SHIFT FROM TWO HIGH TO FOUR HIGH ESPECIALLY THE FIRST TIME. *TT
211200
SOME CUSTOMERS MAY COMMENT ON A HIGHER THAN NORMAL ACCELERATOR PEDAL EFFORT AND / OR HARD AND HIGH TRANSMISSION SHIFTS. *TT
191200
THIS MESSAGES CONCERNS DIAGNOSIS OF HIGH-SPEED REAR BRAKE PULSATION. *TT
000421002
SOME CUSTOMERS MAY COMMENT ON A HIGH TRANSFER CASE SHIFT EFFORT WHEN SHIFTING FROM 2H TO 4H WITH THE VEHICLE IN MOTION. *TT
98077
PRODUCT CAMPAIGN OWNER RENOTIFICATION REGARDING WINDSHIELD RETENTION. *TT
000601006A
EXPERIENCING A TICK TYPE NOISE COMING FROM THE ENGINE WHILE THE ENGINE IS RUNNING DURING COLD OR HOT OPERATION. THE CONDITION WILL BE MOST NOTICEABLE ON VEHICLES THAT HAVE BEEN STORED FOR EXTENDED PERIODS OF TIME WITHOUT RUNNING THE ENGINE OR ON VEHICLES FOLLOWING A REPAIR TO THE VALVE LIFTERS AND CAMSHAFTS. *TT
000602007
SOME VEHICLES MAY EXHIBIT A HOWL TYPE NOISE COMING FROM THE ENGINE WHILE ENGINE IS RUNNING. *TT
000730023
CUSTOMERS MAY COMMENT ON A HIGHER THAN NORMAL ACCELERATOR PEDAL EFFORT. *TT
000862004
SOME CUSTOMERS MAY COMMENT THAT THE ENDS OF THE REAR BUMPER AT THE REAR WHEELHOUSE OPENINGS ARE LOOSE. *TT
990859002A
SOME CUSTOMERS MAY COMMENT THAT THERE IS A CREAKING TYPE SOUND COMING FROM THE RIGHT REAR WHEEL OPENING OR THE DOG LEG AREA WHEN DRIVING SLOWLY OR IN PARKING LOT TYPE MANEUVERS ON 4-DOOR MODELS ONLY. *TT
091000
SOME VEHICLES MAY EXHIBIT WATER ENTRY INTO THE MAIN JUNCTION BOX CAUSING INTERNAL CORROSION AND POSSIBLY A CROSSOVER SITUATION TO POWER OTHER CIRCUITS. *TT
000601022
CUSTOMER COMPLAINT OF ENGINE NOISE. *TT
000851001
SOME CUSTOMERS MAY COMMENT THAT THE BLACK PLASTIC HOUSING AROUND THE OUTSIDE REAR VIEW MIRROR TURNS CHALKY OR IS DULL IN COLOR. *TT
000868001
SOME CUSTOMERS MAY COMMENT THAT WHEN DRIVING ON THE HIGHWAY WITH THE CRUISE CONTROL IN OPERATION, THE TRANSMISSION WILL DOWNSHIFT AND WILL NOT UPSHIFT AGAIN, OR UPSHIFTS ARE DELAYED UNTIL WELL AFTER THE EXPECTED POINT OF UPSHIFT. *TT
99089
GENERAL MOTOR HAS DECIDED THAT THE OWNER MANUALS CONTAIN INCOMPLETE INSTRUCTIONS FOR TOWING THE VEHICLED FROM THE REAR. *TT
990940004
GENERAL MOTORS BEGAN PROVIDING CHILD RESTRAIN SEAT TOP TETHER HARDWARE PACKAGES TO CUSTOMERS IN THE UNITED STATES WHO REQUESTED THEM. *TT
990844010
SOME CUSTOMERS MAY COMMENT ABOUT POOR RADIO RECEPTION. *TT
990604051
SOME CUSTOMERS MAY COMMENT THAT AFTER FUELING THEIR VEHICLE, THE FUEL GAUGE READING MAY BE INCORRECT AND APPEARS TO BE STUCK, INDICATING APPROXIMATELY 1/4 TANK OF FUEL. *TT
990867004
THIS BULLETIN CONTAINS INFORMATION ON CONDITIONS DUE TO CONVERTIBLE TOP WATERLEAKS. *TT
990859002
SOME 4-DOOR MODELS ONLY MAY EXHIBIT A CREAKING TYPE SOUND COMING FROM THE RIGHT REAR WHEEL OPENING OR THE DOG LEG AREA. *TT
99103
CERTAIN VEHICLES MAY EXHIBIT A NO-START CONDITION IN COLD WEATER. *TT
99002
PRODUCT EMISSION CAMPAIGN INFORMATION ON COLD TEMPERATURE NO START. *TT
100299
SUBJECT REGARDING RESOLUTION OF STOP DELIVERY ON CERTAIN VEHICLES WITH 2.0L ENGINES. *TT
98076
SOME VEHICLES MAY EXHIBIT A CONDITION IN WHICH THE COUPLING THAT CONNECTS THE STEERING COLUMN SHAFT TO THE INTERMEDIATE STEERING SHAFT IS CRACKED. THIS PRODUCT SAFETY CAMPAIGN INVOLVES REPLACING THE STEERING SHAFT COUPLING. *TT
3170E
IPC, INTERIOR LIGHTS AND/OR HEADLAMPS FLICKER. *AK FB2
3278
SQUEAL OR SQUEAK TYPE NOISE FROM THE FRONT AXLE AREA DURING COLD AMBIENT TEMPERATURES. *TT
3357
FRONT DOME LAMP COMES ON INTERMITTENT WHILE DRIVING. *TT
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.