Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
512020
Service Bulletin/Repair Instructions
According to Ford Recall 25V793: "According to Ford’s records, the remedy software for Safety Recall 20S73 may not have been installed correctly during a prior dealership visit. Because the correct software may not have been installed on your vehicle, the underlying condition specified in Safety Recall 20S73 may still exist. On your vehicle, it may be possible that the engine cover insulation does not fully extend to the perimeter of the factory engine cover. This may result in elevated temperatures at certain areas of the engine cover surface in the passenger compartment on both driver and passenger sides. Direct and continuous contact with exposed skin at these locations may increase the risk of skin irritation and/or a minor burn.
2101976
Service Bulletin/Repair Instructions
The Tire Pressure Monitoring System (TPMS), on some Ford E450 chassis may experience intermittent loss of signal at one of the wheels and display a fault on the information center of the dashboard . This fault should clear itself through normal driving but because of potential interference from the rear view camera system it is possible for the problem to re occur.
511680
Service Bulletin/Repair Instructions
According to a Furrion TSB "TB-220919": Irregular cooling performance has been reported on the identified refrigerators. The refrigerator compressor has been found to stop working and requires a âÃÂÃÂhard resetâÃÂàby disconnecting power to reset cooling operation. On occasion, disconnecting power does not reset operation and the refrigerator requires service replacement of the control boards. This TSB may not be applicable for some vehicles.
2101585
Service Bulletin/Repair Instructions
The power awning may continue to extend beyond normal end travel position after the activation switch is released due to the activation switch not having a dynamic brake function. The user may find themselves running the awning in and out several times until the optimum position is reached.
511572`
Service Bulletin/Repair Instructions
Defect: Damaged PCB Via. How the defect present itself: Slide Motor will only operate in one direction and/or operate erratically.