Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
S2621000003 REV.A
Service Bulletin/Repair Instructions
The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
S2608000010
Service Bulletin/Repair Instructions
Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00, B1A15-00, B1A16-00, and B1A17-00 in The Radio Frequency Hub (RFH)
108463
Service Bulletin/Repair Instructions
PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
108464
Service Bulletin/Repair Instructions
PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
31-001-25 REV. B
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. A
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
S2208000138 REV.B
Service Bulletin/Repair Instructions
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
104523
Service Bulletin/Repair Instructions
SWITCH AND BEZEL - FRONT DOOR
103261
Service Bulletin/Repair Instructions
SWITCH AND BEZEL - FRONT DOOR
31-001-24
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S1408000384
Service Bulletin/Repair Instructions
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
9100229
Service Bulletin/Repair Instructions
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
9100226
Service Bulletin/Repair Instructions
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
93023
Service Bulletin/Repair Instructions
Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
93120
Service Bulletin/Repair Instructions
FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
9100196
Service Bulletin/Repair Instructions
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
0815223
Service Bulletin/Repair Instructions
Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
0700723
Service Bulletin/Repair Instructions
Water Quality When Mixed With Engine Coolant
1804823
Service Bulletin/Repair Instructions
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
9003357A
Service Bulletin/Repair Instructions
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
9003357a
Service Bulletin/Repair Instructions
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
9003357
Service Bulletin/Repair Instructions
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
3100123
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
31-002-22
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S2208000138RevA
Service Bulletin/Repair Instructions
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
3100122
Service Bulletin/Repair Instructions
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
0814822
Service Bulletin/Repair Instructions
Flash: Radio Frequency Hub Module (RFHM) Updates This bulletin involves reprogramming the RFHM with the latest software available. The customer may describe that they heard about these vehicles that can be unlawfully driven away by thieves when they are able to program new key fobs through the RFHM. Software enhancement include: Update to the RFHM software to prevent hackers from programming their own key fob to the vehicle. This is intended to deter an unwanted drive off of the vehicle without the customers knowledge. Performing this RFHM update will prevent additional key fob programming and this must be communicated to the customer before performing this RFHM update. If additional keys are required by the customer after this RFHM update is performed the replacement of the RFHM is required and must be at a previous SW level.
S2208000138
Service Bulletin/Repair Instructions
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
S2208000131
Service Bulletin/Repair Instructions
No Start Condition After A Fuel Pump Replacement, Multiple Fuel System Level Related DTC?s Setting
S2209000004
Service Bulletin/Repair Instructions
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
V51
Service Bulletin/Repair Instructions
Customer Satisfaction Notification V51 Reprogram Powertrain Control Module
9004509
Service Bulletin/Repair Instructions
Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
S1709000010 RevB
Service Bulletin/Repair Instructions
Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
S1709000010RevB
Service Bulletin/Repair Instructions
Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
S2108000163
Service Bulletin/Repair Instructions
No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
S2109000004
Service Bulletin/Repair Instructions
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
9004386
Service Bulletin/Repair Instructions
WIRING, Body Before replacing this harness, please contact FCA Redacted Content to see if a repair kit is available for your application. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content
S1809000007
Service Bulletin/Repair Instructions
Customer Complaint May Include Engine Oil Leak Or Consumption
S1809000007 Rev.
Service Bulletin/Repair Instructions
Customer Complaint May Include Engine Oil Leak Or Consumption
S1608000226
Service Bulletin/Repair Instructions
Battery Tester Warranty Code Procedures, Midtronics Charger Update Process
S2008000113
Service Bulletin/Repair Instructions
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
S2008000113 Rev.
Service Bulletin/Repair Instructions
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
S16080002261
Service Bulletin/Repair Instructions
Battery Tester Warranty Code Procedures, Medtronic Update Process
S1821000001
Service Bulletin/Repair Instructions
Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
9004009
Service Bulletin/Repair Instructions
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
S1709000010 Rev.
Service Bulletin/Repair Instructions
Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
23-042-20
Service Bulletin/Repair Instructions
Headlamp Condensation and Fogging This bulletin involves installing updated vent caps on the headlamp assembly. Customers may experience the following:One or both of the vehicle?s headlamp assemblies are fogged with a light layer of condensation on the inside of the lenses.
V86
Service Bulletin/Repair Instructions
Emissions Recall V86 Catalytic Converter Efficiency
V86 Combo Rev3
Service Bulletin/Repair Instructions
Emissions Recall V86 Catalytic Converter Efficiency
31-002-20
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
3100220
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
08-092-20
Service Bulletin/Repair Instructions
Improper Up Shift With Paddle Shift This bulletin involves replacing both steering wheel paddle shifter. Customers may experience the following:When trying to upshift using the paddle shifter on the steering, the transmission will downshift instead.
0809220
Service Bulletin/Repair Instructions
Improper Up Shift With Paddle Shift This bulletin involves replacing both steering wheel paddle shifter. Customers may experience the following:When trying to upshift using the paddle shifter on the steering, the transmission will downshift instead.
18-073-20
Service Bulletin/Repair Instructions
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):U1424-00 - Implausible Engine Torque Signal Received(2015 MY). P0456 - EVAP System Small Leak. P2610 - PCM Internal Engine Off Timer Performance. P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible. P0335 - Crankshaft Position Sensor Circuit(2014-2015 MY). U0140 - Lost Communication With Body Control Module(LC, LD and LX). P1621 - O2 Sensor Reference Voltage Circuit Low. P1622 - O2 Sensor Reference Voltage Circuit High. P0606 - Internal Control Processor. P0300 - Multiple Cylinder Misfire. P219A - Bank 1 Air-Fuel Ratio Imbalance. P219B - Bank 2 Air-Fuel Ratio Imbalance. P0307 - Cylinder 7 Misfire. P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. The following software enhancements are also available(2015 MY):Reverse gear lock-out change from 16 kph (10 mph) to 4.8 kph (3 mph)(Sales Code EZC with DEC). Change to purge vapor control calibration(Sales Code EZH with DGJ). Improvements to vehicle overspeed control(Sales Code EZH with DGJ). Calibration update to the electronic voltage regulator voltage set point(Sales Code EZH with DGJ). Additional Symptoms:Customers with a Pursuit Dodge Charger (LD) may describe an unpleasant odor in the vehicle under certain extreme ambient conditions2013-2015 MY LD with (Sales Codes EZH with AHB or AHV only). Technicians may find that the original vehicle Frequency Operated Button Integrated Key (FOBIK) does not function properly following replacement of the Wireless Ignition Node (WIN/WCM). The Secret Key information stored in the PCM may be corrupt. This update will restore the PCM?s ability to store/transfer valid Secret Key information
1807320
Service Bulletin/Repair Instructions
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):U1424-00 - Implausible Engine Torque Signal Received(2015 MY). P0456 - EVAP System Small Leak. P2610 - PCM Internal Engine Off Timer Performance. P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible. P0335 - Crankshaft Position Sensor Circuit(2014-2015 MY). U0140 - Lost Communication With Body Control Module(LC, LD and LX). P1621 - O2 Sensor Reference Voltage Circuit Low. P1622 - O2 Sensor Reference Voltage Circuit High. P0606 - Internal Control Processor. P0300 - Multiple Cylinder Misfire. P219A - Bank 1 Air-Fuel Ratio Imbalance. P219B - Bank 2 Air-Fuel Ratio Imbalance. P0307 - Cylinder 7 Misfire. P2096 - Downstream Fuel Trim System 1 Lean. P2097 - Downstream Fuel Trim System 1 Rich. The following software enhancements are also available(2015 MY):Reverse gear lock-out change from 16 kph (10 mph) to 4.8 kph (3 mph)(Sales Code EZC with DEC). Change to purge vapor control calibration(Sales Code EZH with DGJ). Improvements to vehicle overspeed control(Sales Code EZH with DGJ). Calibration update to the electronic voltage regulator voltage set point(Sales Code EZH with DGJ). Additional Symptoms:Customers with a Pursuit Dodge Charger (LD) may describe an unpleasant odor in the vehicle under certain extreme ambient conditions2013-2015 MY LD with (Sales Codes EZH with AHB or AHV only). Technicians may find that the original vehicle Frequency Operated Button Integrated Key (FOBIK) does not function properly following replacement of the Wireless Ignition Node (WIN/WCM). The Secret Key information stored in the PCM may be corrupt. This update will restore the PCM?s ability to store/transfer valid Secret Key information
9003704
Service Bulletin/Repair Instructions
Transmission Oil Pan, Heater (TMU), Tube or O-ring Applies to vehicles equipped with 8 speed transmissions only; if you have a leak that appears to be at the pan the use of proper leak detection is recommended. The fluid in the 8 speeds can be detected with a black light and there are aftermarket spray on leak detection materials to help ensure that the leak is properly diagnosed and not from another location such as cooler lines, heater tubes, or case porosity. Please note that the transmission pan gasket is available for many of the 8 speed applications FCA offers. Please review the available quick connect and transfer tube parts, as replacement of the TMU may not be required. If a TOC line connection is found to be the source, the quick connect may need replacement. If the leak source is coming from the connection of the TMU to the transmission, the transfer tube may need replacement. When parts are returned to the QEC the retaining clips (snap ring) for the quick disconnect fittings are missing. (This leaves a question as to whether the clips were missing from the assembly plant, or the technician removed them in order to make line removal easier.) Please return the clips with the transmission heater and note if they were not there to begin with. For any questions regarding transmission heater, contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
W56
Service Bulletin/Repair Instructions
Customer Satisfaction Notification W56 Reprogram Powertrain Control Module
W56 Combo
Service Bulletin/Repair Instructions
Customer Satisfaction Notification W56 Reprogram Powertrain Control Module
V86 Combo Rev2
Service Bulletin/Repair Instructions
Emissions Recall V86 Catalytic Converter Efficiency
Recall
Service Bulletin/Repair Instructions
Emissions Recall V86 Catalytic Converter Efficiency
V86 Combo Rev1
Service Bulletin/Repair Instructions
Emissions Recall V86 Catalytic Converter Efficiency
V86-1
Service Bulletin/Repair Instructions
Emissions Recall V86 Catalytic Converter Efficiency
S2008000093
Service Bulletin/Repair Instructions
Blind Spot Or Park Assist Warnings, False Activation
V86 Rev. 1
Service Bulletin/Repair Instructions
Emissions Recall V86 Catalytic Converter Efficiency
23-015-20
Service Bulletin/Repair Instructions
Disinfectant Solution Recommended for COVID-19
08-049-20
Service Bulletin/Repair Instructions
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
18-039-20
Service Bulletin/Repair Instructions
Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
S2019000002
Service Bulletin/Repair Instructions
Hands On Steering Wheel Message In EVIC
UB4 Rev. 6
Service Bulletin/Repair Instructions
Emissions Recall UB4 Evaporative Emissions Canister
UB4 Rev. 5
Service Bulletin/Repair Instructions
Revised Emissions Recall UB4 Evaporative Emissions Canister
UB4 Rev. 4
Service Bulletin/Repair Instructions
Revised Emissions Recall UB4 Evaporative Emissions Canister
9004022
Service Bulletin/Repair Instructions
Air Suspension Components Star Parts Catalog has been updated to show individual service parts for the compressor assembly. This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.
08-111-19 REV. A
Service Bulletin/Repair Instructions
RA3 and RA4 GPS Calibration Update This bulletin involves updating the radio software. 18.01.35 (BU Vehicles)
VB3
Service Bulletin/Repair Instructions
Revised Customer Satisfaction Notification VB3 ? Navigation Flash
VB3 REV1
Service Bulletin/Repair Instructions
Revised Customer Satisfaction Notification VB3 ? Navigation Flash
31-003-19
Service Bulletin/Repair Instructions
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31-004-19
Service Bulletin/Repair Instructions
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
31-005-19
Service Bulletin/Repair Instructions
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31-006-19
Service Bulletin/Repair Instructions
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
3100319
Service Bulletin/Repair Instructions
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100419
Service Bulletin/Repair Instructions
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
3100519
Service Bulletin/Repair Instructions
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100619
Service Bulletin/Repair Instructions
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
D-19-25
Service Bulletin/Repair Instructions
RRT 19-090 (Service Bulletin 08-111-19) 2013-2018 Multiple Vehicles RA3/RA4 Radio GPS Certification Error
D1925
Service Bulletin/Repair Instructions
RRT 19-090 (Service Bulletin 08-111-19) 2013-2018 Multiple Vehicles RA3/RA4 Radio GPS Certification Error
08-111-19
Service Bulletin/Repair Instructions
RA3 and RA4 GPS Radio Update This bulletin involves updating the radio software. 18.01.35 (BU Vehicles)
0811119
Service Bulletin/Repair Instructions
RA3 and RA4 GPS Radio Update This bulletin involves updating the radio software. 18.01.35 (BU Vehicles)
18-089-19
Service Bulletin/Repair Instructions
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
1808919
Service Bulletin/Repair Instructions
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
9004144
Service Bulletin/Repair Instructions
RADIO, MULTI Media For RA3 and RA4 8.4? radio concern of reoccurring update request pop-up on each key cycle after a radio FOTA (Firmware Update Over the Air) has been completed, please DO NOT replace the radio. To recover the radio, 12v power needs to be disconnect from the radio to clear radio memory either by removal of the radio fuse or preforming a battery disconnect. Note: Fuse removal is the preferred method. The radio needs to be disconnected from power long enough to clear memory and discharge the Capacitance within the radio. Please refer to the latest in diagnostics for further information.
08-089-19
Service Bulletin/Repair Instructions
Flash Over The Air (FOTA) Software Update RA3 and RA4 Radio This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update.
9003220
Service Bulletin/Repair Instructions
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
9004036
Service Bulletin/Repair Instructions
ACTUATOR, A/C and Heater Before replacing HVAC actuator, please contact either Thomas Conway (248) 635-7090 or Paul Aquino (248) 854-4819. Engineering is looking to gather infomation on fail mode and customer concern. If no response in 15 minutes, proceed with repair.
08-019-17 REV. B
Service Bulletin/Repair Instructions
RG3 RG4 RJ3 RJ4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. A small number of customers may experience one or more of the following:Navigation failed message is displayed (WK and KL with RG3 and RG4). The clock not automatically updating to local time (WK and KL with RG3 and RG4). Poor or no connection to cellular network (WK and KL with RG3 and RG4). HVAC temperature out of sync with radio display (KL with RG3 and RG4). Some Uconnect App remote commands do not execute with the vehicle. Display goes blank/black (WK and KL with RG3 and RG4). Cyrillic keyboard is missing in phone book (WK and KL with RG3 or RG4). Wrong speed limit on NAV speed camera indication (WK and KL with RG3 or RG4). Blind Spot module beep or chime sound may be heard continuously (KL Only). Radio may keep the CAN bus network awake, causing a battery drain. Voice Recognition (VR) to set temperature, will indicate wrong setting to rear seat temperature. Not possible to set temperature in degrees Celsius using the VR (UK vehicles only). Teleprompter does not appear when pressing the VR button. VR operation cancels while in media mode. Radio may display camera?s previous image before displaying the current image. Navigation lost vehicle position during route calculation. Navigation displays are missing after vehicle heading changes. Navigation giving incorrect guidance to exit the highway. FM audio may switch to AM after ignition cycle. Text messages appear as sender?s phone number, not their name. VR phone button may not work at times. Audio muted after AUX device is disconnected. VR ?Listen? to text will only play first message. Drive Mode: Eco, Sport or Normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). Speed adjusted volume may not work. AM/FM seek or tuner soft keys may be missing. Display screen shows ambient tempe
9003818
Service Bulletin/Repair Instructions
6 Speed Manual Transmission Please contact Kevin Stepinski (586) 219-2438 prior to doing any repairs on this transmission if you have a broken input gear. Leave a message if Kevin does not answer within 15 minutes, proceed with the repair.
9003812
Service Bulletin/Repair Instructions
Lower Control Arm If replacing Lower Control Arm due to worn bushings, please note that replacement bushings are now available separate from the control arm.
T12
Service Bulletin/Repair Instructions
Customer Satisfaction Notification T12 VECI Label The Vehicle Emission Control Information (VECI) label on about 120,000 of the above vehicles may be missing emission control information. The VECI label is often used during in-use Inspection and Maintenance (I/M) testing to verify proper emissions related components. Incorrect VECI label information could result in denial of vehicle registration for the vehicle in the state of California. A new VECI label must be installed.
9003355
Service Bulletin/Repair Instructions
3.2L - 3.6L Cylinder Head Assy Multiple cylinder head replacement. If a cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people. First: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com Second: Kevin Refalo - Cell (248) 260-0738 Kevin.refalo@facgroup.com If no response in 15 minutes, proceed with repair.
21-041-17
Service Bulletin/Repair Instructions
Flash: Transmission Diagnostic and Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, a technician may find the following Diagnostic Trouble Codes (DTCs) have been set. This software update will also address some symptom/conditions listed below:3.6L Engine (Sales Code ERB) with 845RE Transmission (Sales Code DFL):During a Flash Over The Air (FOTA) radio update, the transmission shift points will default to higher shift points. The transmission will shift at high engine Revolutions Per Minute (RPM) and 7th and 8th gears may be blocked (LA and LD). Improved shift quality. P1DCD - TCM Monitoring Processor Performance Multiple Clutches Locked Up. P1B13 - Park-By-Wire Unintended Out Of Park Position. P0734 - Gear 4 Shift Incorrect Ratio. 3.6L Engine (Sales Code ERB) with 8HP45 Transmission (Sales Code DFG):During a FOTA radio update, the transmission shift points will default to higher shift points. The transmission will shift at high engine RPM and 7th and 8th gears may be blocked (LA and LD). Improved shift quality. Harsh 2-1 Downshift Or Bump At Low Speeds. P0734 - Gear 4 Shift Incorrect Ratio. 3.0L Engine (Sales Code EHD) with 845RE Transmission (Sales Code DFL):Improved shift quality. P1DCD - TCM Monitoring Processor Performance Multiple Clutches Locked Up. P1B13 - Park-By-Wire Unintended Out Of Park Position.
08-028-17 REV. B
Service Bulletin/Repair Instructions
RA3 and RA4 Radio Over The Air Software Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The following improvements are included in this update:Fix for sport mode not working in the performance menu page (2015 LA equipped with 6.4L and 5.7L Sales Codes ESH and EZC Only). Adds Apple Siri® Eyes Free capability for iPhone® owners. Auto Play can now be configured. Adds do not disturb text message feature. The ability to drag and drop icons into the menu bar. Fix for radio locks up/frozen. Fix for stuck on black/blank screen. Human Machine Interface (HMI) improvements. Several navigation improvements. Fix for radio loss of time display. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhanced Voice recognition (VR) performance. Enhancements in Connectivity Apps (Yelp, Pandora, Aha, etc).
9003418
Service Bulletin/Repair Instructions
Rotor - Front 2 Piece For LA, LD SRT vehicles with the 2-piece Front Rotor (BR7 sales code), do NOT replace the rotor for a clicking noise occurring while turning at low parking lot speeds. Instead, remove front wheels and rotors and clean mating surfaces (wheel mounting face, rotor mounting faces (both sides), and hub mounting face) with a Scotch Brite Pad or equivalent, and reassemble. When installing wheel, MUST use clicker/torque wrench, set to 110 ft-lb (150 Nm).
0802817
Service Bulletin/Repair Instructions
This bulletin provides information regarding the latest Flash Over The Air update (FOTA) and provides a service technician an overview of the steps a customer will need to take to complete the update.
18-061-17
Service Bulletin/Repair Instructions
Powertrain diagnostic and system enhancement.
1806117
Service Bulletin/Repair Instructions
Powertrain diagnostic and system enhancement.
23-030-17
Service Bulletin/Repair Instructions
Hood Seal Torn or Deformed This bulletin involves replacing the hood seals due to damage and/or being torn. The customer may experience the hood seal drooping due to cracks and tears on the hood seal.
08-019-17 REV. A
Service Bulletin/Repair Instructions
RG3 RG4 RJ3 RJ4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. A small number of customers may experience one or more of the following:Navigation failed message is displayed (WK and KL with RG3 and RG4). The clock not automatically updating to local time (WK and KL with RG3 and RG4). Poor or no connection to cellular network (WK and KL with RG3 and RG4). HVAC temperature out of sync with radio display (KL with RG3 and RG4). Some Uconnect App remote commands do not execute with the vehicle. Display goes blank/black (WK and KL with RG3 and RG4). Cyrillic keyboard is missing in phone book (WK and KL with RG3 or RG4). Wrong speed limit on NAV speed camera indication (WK and KL with RG3 or RG4). Blind Spot module beep or chime sound may be heard continuously (KL Only). Radio may keep the CAN bus network awake, causing a battery drain. Voice Recognition (VR) to set temperature, will indicate wrong setting to rear seat temperature. Not possible to set temperature in degrees Celsius using the VR (UK vehicles only). Teleprompter does not appear when pressing the VR button. VR operation cancels while in media mode. Radio may display camera?s previous image before displaying the current image. Navigation lost vehicle position during route calculation. Navigation displays are missing after vehicle heading changes. Navigation giving incorrect guidance to exit the highway. FM audio may switch to AM after ignition cycle. Text messages appear as sender?s phone number, not their name. VR phone button may not work at times. Audio muted after AUX device is disconnected. VR ?Listen? to text will only play 1st message. Drive Mode: Eco, Sport or Normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). Speed adjusted volume may not work. AM/FM seek or tuner soft keys may be missing.
9003413
Service Bulletin/Repair Instructions
Accelerator Pedal Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. P2122 and P2127 will set if accelerator pedal connector is disconnected during diagnosis. Make sure codes are active before replacing pedal. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.
08-047-17
Service Bulletin/Repair Instructions
Flash: RA3/RA4 Radio Software Enhancements This bulletin involves inspecting and if required, updating the radio software. A small number of customers may experience one or more of the following: ? **?Navigation Failed? message is displayed. ? Navigation is inoperative or inaccurate. ? CD player will not play songs and/or locks up the radio. ? The clock will not automatically update to local time. ? The clock may be off by several hours (RA3 only). ? HVAC temperature out of sync with radio display (KL vehicles). ? Some Uconnect App remote commands do not execute with the vehicle. ? Radio Apps are inoperative. ? Radio will lock up. Radio display screen is black or blank. Battery drain due to radio staying on.** Rearview Camera image appears jittery (UF vehicles only). Inability to establish a WiFi connection when security feature is enabled (UF vehicles only). Audio distortion/popping heard while playing Apple devices through the USB port (UF vehicles only). Remote Uconnect Apps functions (i.e. door locks, remote start) inoperative while the engine is running (UF vehicles only). HVAC temperature out of sync with radio display (KL vehicles). Intermittently blind spot chime will not turn off (KL vehicles only). The radio may switch from SiriusXMT to an AM station by itself. Uconnect registration always present, can not remove Uconnect account. Audio muted after AUX device is disconnected. In addition, the following Improvements are included: **Adds Apple SiriT Eyes Free capability for iPhoneT owners. Add the ability to drag and drop icons into the menu bar. Auto Play can now be configured. Enhanced VR performance. Media devices, phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhancements in Connectivity Apps (YelpT, PandoraT, AhaT, etc). Human Machine Interface (HMI) improvements. Adds ?do not disturb? text message feature.**
9003109
Service Bulletin/Repair Instructions
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
9003696
Service Bulletin/Repair Instructions
Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
08-028-17
Service Bulletin/Repair Instructions
RA3 And RA4 Radio Over The Air Software Updates This bulletin provides information regarding the latest Flash Over The Air update (FOTA) and provides a service technician an overview of the steps a customer will need to take to complete the update. The following improvements are included in this update: Adds Apple Siri® Eyes Free capability for iPhone® owners. Auto Play can now be configured. Adds do not disturb text message feature. The ability to drag and drop icons into the menu bar. Fix for radio locks up/frozen. Fix for stuck on black/blank screen. Human Machine Interface (HMI) improvements. Several navigation improvements. Fix for radio loses time. Charge Complete notification is not received (RU PHEV only). Media devices, Phone pairing and Bluetooth usage improvements. Improved tuner performance. Enhanced Voice recognition (VR) performance. Enhancements in Connectivity Apps (Yelp, Pandora, Aha, etc).
9003655
Service Bulletin/Repair Instructions
Rear Axle Assembly If replacing Limited Spin Differential (LSD)/Anti-Spin Differential rear axles for any reason, the Mopar replacement axle will need the oil drained and re-filled with oil PN: 68083381AA (which contains updated friction modifier). This change was recently introduced in production to help address axle noise concerns being reported from the field while the vehicle is performing tight turning maneuvers. Failure to do so may result in a customer returning with noise complaints. NOTE: If the Mopar replacement axle serial number is past the following dates below for the corresponding axle part numbers, DO NOT DRAIN AND REFILL. The replacement axle will already have new fluid: Axle Part#: 53010668XX ? Serial # T03UG0047EXXXX Axle Part#: 53010669XX ? Serial # T03UG0047GXXXX Axle Part#: 68269917XX ? Serial # T03UG0037JXXXX Axle Part#: 05038703XX ? Serial # T03UG0047HXXXX Otherwise, perform the following repair procedure in the order given: 1. Follow standard rear axle installation procedure. Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info> 03 - Differential and Driveline> Rear Axle> Installation>Standard Procedure>Rear Axle 2. Follow standard axle fluid drain/re-fill service procedure in TECHCONNECT. Refer to the detailed service procedures available in DealerCONNECT> TechCONNECT under: Service Info> 03 - Differential and Driveline> Rear Axle> Standard Procedure>Standard Procedure - Fluid Drain and Fill
9003694
Service Bulletin/Repair Instructions
Oil Pump Assembly If error code P06DD present on any Pentastar V6 application, please inspect oil pump for relief valve failure. See photo attached. If valve is found out of place please call Bob Jackson (248) 944-0466 bob.jackson@fcagroup.com, or Joe Lovell (734) 309-6467 joe.lovell@fcagroup.com before proceeding. If unable to reach after 15 minutes record the following information and proceed with oil pump replacement and hold part for return to FCA via Fastrack system
9003687
Service Bulletin/Repair Instructions
Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
9003681
Service Bulletin/Repair Instructions
Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
25-003-16 REV. A
Service Bulletin/Repair Instructions
Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.
2500316
Service Bulletin/Repair Instructions
Replace Vehicle Emission Certification Information Label This bulletin involves replacing the Vehicle Emission Certification Information (VECI) Label.Owner may be turned away from Inspection and Maintenance (IM) station or fail IM testing because of missing emission components on VECI label. The customer may notice that some info is missing on their VECI labels.is missing. If information is shown in this area, do not replace the label.All vehicles were built with the correct emission components installed and there is no impact on emission performance or drivability.
0500416REVA
Service Bulletin/Repair Instructions
Vibration While Braking This bulletin involves resurfacing either front/rear or all rotors and if necessary, replacing either front/rear or all brake rotors due to inactivity on dealer lots. The customer may describe a shake and/or vibration in the steering wheel and/or the seat while the brakes are applied. This vibration may be caused by corrosion on the brake rotors.
0500416
Service Bulletin/Repair Instructions
Vibration While Braking This bulletin involves resurfacing either front/rear or all rotors and if necessary, replacing either front/rear or all brake rotors due to inactivity on dealer lots. The customer may describe a shake and/or vibration in the steering wheel and/or the seat while the brakes are applied. This vibration may be caused by corrosion on the brake rotors.
05152029
Service Bulletin/Repair Instructions
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
05154726A
Service Bulletin/Repair Instructions
Electric Power Steering Gear For LA, LD and LX Models ONLY; Before this part is replaced for: A) Electrical, Communication or DTC issue please contact: Terry Gavit @ cell (248) 882-6108 terry.gavit@fcagroup.com Engineering is requesting a copy of VSR to be emailed to the above address. B) Noise or Mechanical issue please contact: Barbara Strace @ cell (586) 246-4211. If you do not receive a return call within 15 minutes, proceed with the repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order.
05154726A$
Service Bulletin/Repair Instructions
Electric Power Steering Gear For LA, LD and LX Models ONLY; Before this part is replaced for: A) Electrical, Communication or DTC issue please contact: Terry Gavit @ cell (248) 882-6108 terry.gavit@fcagroup.com Engineering is requesting a copy of VSR to be emailed to the above address. B) Noise or Mechanical issue please contact: Barbara Strace @ cell (586) 246-4211. If you do not receive a return call within 15 minutes, proceed with the repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order.
05154262A
Service Bulletin/Repair Instructions
Hub & Bearing Assy - Front For LA, LD SRT vehicles with the 2-piece front brake rotor (BR7 sales code), do NOT replace the front Hub & Bearing Assy for a clicking noise occurring while turning during low speed parking lot maneuvers. Instead, remove front wheels and rotors and clean mating surfaces (wheel mounting face, rotor mounting faces (both sides), and hub face) with a Scotch Brite Pad or equivalent, and re-assemble.
18-045-16 REV. A
Service Bulletin/Repair Instructions
FLASH: DIAGNOSTIC AND SYSTEM IMPROVEMENTS THIS BULLETIN INVOLVES REPROGRAMMING OF THE POWERTRAIN CONTROL MODULE (PCM) WITH THE LATEST AVAILABLE SOFTWARE. CUSTOMERS MAY EXPERIENCE ONE OR MORE OF THE FOLLOWING SYMPTOMS AND/OR A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION. UPON FURTHER INVESTIGATION THE TECHNICIAN MAY FIND ONE OR MORE OF THE FOLLOWING DTCS: · **P2299 - BRAKE PEDAL POSITION/ACCELERATOR PEDAL POSITION INCOMPATIBLE. · P0456 - EVAP SYSTEM SMALL LEAK. · P2610 - PCM INTERNAL ENGINE OFF TIMER PERFORMANCE. · P2172 - HIGH AIRFLOW/VACUUM LEAK DETECTED (INSTANTANEOUS ACCUMULATION). · P0123 - THROTTLE POSITION SENSOR 1 CIRCUIT HIGH. · P0223 - THROTTLE POSITION SENSOR 2 CIRCUIT HIGH. · P0122 - THROTTLE POSITION SENSOR 1 CIRCUIT LOW. · P0222 - THROTTLE POSITION SENSOR 2 CIRCUIT LOW. · P0335 - CRANKSHAFT POSITION SENSOR CIRCUIT. · P0339 - CRANKSHAFT POSITION SENSOR INTERMITTENT.** · P1217 - ACTIVE EXHAUST VALVE 1 PERFORMANCE. · P121B - ACTIVE EXHAUST VALVE 2 PERFORMANCE. **THE FOLLOWING SOFTWARE ENHANCEMENT IS ALSO AVAILABLE: · CHANGE TO PURGE VAPOR CONTROL CALIBRATION.** IN ADDITION, CUSTOMERS MAY ALSO COMMENT ON THE FOLLOWING: · UNABLE TO ACCURATELY INCREASE OR DECREASE THE CRUISE CONTROL SET SPEED USING THE RESUME OR SET BUTTONS WHILE THE INSTRUMENT CLUSTER IS SET ON METRIC UNITS. INSTEAD OF CHANGING VEHICLE SPEED BY 1 KPH WHEN PRESSING THE BUTTONS, THE VEHICLE SPEED WILL INCREASE APPROXIMATELY 1.6 KPH. · SLIGHT SPARK KNOCK CONDITION DURING AGGRESSIVE HIGH SPEED DRIVING WHICH MAY PREVENT THE VEHICLE FROM ACHIEVING MAXIMUM TOP SPEED.
68141352A$
Service Bulletin/Repair Instructions
3.2L - 3.6L Cylinder Head Assy Multiple cylinder head replacement. If cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people.~ First: Ron Dallison ? Cell (248) 292-9510 Ron.dallison@fcagroup.com ~ Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.
24-004-16
Service Bulletin/Repair Instructions
Flash: HVAC System Enhancement This bulletin involves reprogramming the Heating Ventilation Air Conditioning (HVAC) Module with new software. Customers may describe an unpleasant odor in the vehicle after driving from highway speed limits back down to city speed limits or they may also notice that the left temp door is inoperable. Updating the HVAC software will correct these conditions.
18-084-16
Service Bulletin/Repair Instructions
Flash: 5.7L Diagnostic And System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): · **P0456 - Evap System Small Leak. · P2610 - PCM Internal Engine Off Timer Performance. · P2299 - Brake Pedal Position / Accelerator Pedal Position Incompatible. · P0335 - Crankshaft Position Sensor Circuit. (2014-2015 MY).** · U0140 - Lost Communication With Body Control Module. (LC, LD and LX). · P1621 - O2 Sensor Reference Voltage Circuit Low. · P1622 - O2 Sensor Reference Voltage Circuit High. · P0606 - Internal Control Processor. · P0300 - Multiple Cylinder Misfire. · P219A - Bank 1 Air-Fuel Ratio Imbalance. · P219B - Bank 2 Air-Fuel Ratio Imbalance. · P0307 - Cylinder 7 Misfire. · P2096 - Downstream Fuel Trim System 1 Lean. · P2097 - Downstream Fuel Trim System 1 Rich.
08-072-16
Service Bulletin/Repair Instructions
RG3 RG4 RJ3 RJ4 Radio EnhancementsThis bulletin involves inspecting and if required, updating the radio software.A small number of customers may experience one or more of the following: · Blind Spot module beep or chime sound may be heard continuously (KL Only). · Radio may keep the CAN bus network awake, causing a battery drain. · Voice Recognition (VR) to set temperature, will indicate wrong setting to rear seat temperature.· Not possible to set temperature in degrees Celsius using the VR (UK vehicles only). · Teleprompter does not appear when pressing the VR button.· VR operation cancels while in media mode. · Radio may display camera?s previous image before displaying the current image. · Navigation lost vehicle position during route calculation. · Navigation displays are missing after vehicle heading changes. · Navigation giving incorrect guidance to exit the highway. · FM audio may switch to AM after ignition cycle. · Text messages appear as sender?s phone number not their name. · VR phone button may not work at times. · Audio muted after AUX device is disconnected. · VR ?Listen? to text will only play 1st message. · Drive Mode: Eco, Sport or Normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). · Speed adjusted volume may not work.· AM/FM seek or tuner soft keys may be missing.· Display screen shows ambient temperature as ?- - ? not normal values. Improvements:· **User can pair iPhone with Uconnect via Bluetooth and talk to Siri through Uconnect.Improvements:· **User can pair iPhone with Uconnect via Bluetooth and talk to Siri through Uconnect.· HVAC temperature out of sync with radio display (KL Only).** · Spanish translation. · Radio station, scroll feature. · Drive Mode: Launch control button, text improvements (LA, LD, LX and ZD Only). · Displays correct media, song titles and tracks. · Incoming calls, audio enhance
68239269A$
Service Bulletin/Repair Instructions
EXHAUST ACTUATOR AND VALVE SPRING IF AN ELECTRONIC EXHAUST VALVE SPRING IS BROKEN, PLEASE REPLACE THE SPRING WITH PN 68319331AA~ - IF SPRING IS NOT BROKEN AND REPLACING ACTUATOR, PLEASE CONTACT JASON MALTESE CELL (248) 931-4179 - EXHAUST ENGINEER. ~ IF NO RESPONSE IN 15 MINUTES, PROCEED WITH REPAIR
03-004-16
Service Bulletin/Repair Instructions
Inspect And Replace Propeller Shaft This bulletin involves inspecting and replacing the propeller shaft due to a whining noise at high speeds. SYMPTOM/CONDITION: The customer or technician may hear a whining noise coming from the rear axle area.
68258644A
Service Bulletin/Repair Instructions
Anti-Lock Brake Module (ABS) Before replacing the ABS module, please call Fadi Korkis at cell (586) 722-4100. If you don't receive response within 15 minutes, please continue with normal repair procedure.
68258644A$
Service Bulletin/Repair Instructions
Anti-Lock Brake Module (ABS) Before replacing the ABS module, please call Fadi Korkis at cell (586) 722-4100. If you don't receive response within 15 minutes, please continue with normal repair procedure.
18-070-16
Service Bulletin/Repair Instructions
Flash: Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with updated software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following (DTCs) set in the PCM memory: · **P0456 - EVAP System Small Leak. · P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance.** · U0140 - Lost Communication With Body Control Module. Attempting to clear the DTC will be unsuccessful. · P0300 - Multiple Cylinder Misfire. · P0573 - Brake Switch 1 Stuck Off.
21-019-16
Service Bulletin/Repair Instructions
Flash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming of the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience an erroneous Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find a Diagnostic Trouble Code (DTC) stored in the TCM memory. 3.6L Engine (Sales Code ERB) with 845RE Transmission (Sales Code DFL): · **Improved shift quality.** · P1DCD - TCM monitoring processor performance multiple clutches locked up. · P1B13 - Park-By-Wire unintended out of park position. · P0734 - Gear 4 Shift Incorrect Ratio. 3.6L Engine (Sales Code ERB) with 8HP45 Transmission (Sales Code DFG): · **Improved shift quality.** · Harsh 2-1 downshift or bump at low speeds. · P0734 - Gear 4 Shift Incorrect Ratio. 3.0L Engine (Sales Code EHD) with 845RE Transmission (Sales Code DFL): · **Improved shift quality.** · P1DCD - TCM monitoring processor performance multiple clutches locked up. · P1B13 - Park-By-Wire unintended out of park position.
68184926A
Service Bulletin/Repair Instructions
Integrated Center Stack If vehicle is found within 50 mile radius of the Detroit Metro area please hold vehicle and contact:~ Contact one of the following:~ Daniel Acciacca CELL (586) 709-1537~ Michael Savich CELL (248) 214-7270~ Ayed Hadaad CELL (248) 941-8707~ Issue: On a 2015 & 2016MY LA (Challenger), LD(Charger) and LX (300), the Integrated Center Stack (ICS) may experience a lock-up/Inop condition (complete loss of functionality) during any vehicle diagnostic session (reading fault codes, clearing fault codes, reflashing of any module, etc.). If this occurs, do not replace the ICS. The module functionality can be restored if it is reset by disconnecting power to it (by removing fuse, battery disconnect or module connector disconnect).~
68105583A
Service Bulletin/Repair Instructions
Pentastar Oil Filter Adapter: Before replacing this part, please call any one of the following people. Engineering is seeking information regarding this part.~ Dye must be used to determine where the leak is coming from before replacing. Also please check the recently updated Service Bulletin Number 09-008-15. ~ First: Nick Morand Cell (248) 410-8078 - Nick.morand@fcagroup.com Second: Bob Jackson Cell (248) 944-0466 - bob.jackson@fcagroup.com Third: Joe Lovell Cell (734 309-6467 - joe.lovell@fcagroup.com If a response is not received within 15 mins, then proceed with the necessary repair.~
RL305553A
Service Bulletin/Repair Instructions
9-spd Transmission: FOR NAFTA Market Only: If you are ordering this transmission please follow all wiTECH pop ups and Warranty Payment Guidelines. If this vehicle contains 1 of the 30 Diagnostic Codes in the 9 Speed Tutorial located on the Service Home Page then please follow the repair steps and submit a Topology report as well as a Vehicle Scan Report with the Warranty Claim.~
21-020-16
Service Bulletin/Repair Instructions
Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
2102016
Service Bulletin/Repair Instructions
Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
0805316REVB
Service Bulletin/Repair Instructions
RA3/RA4 Radio Software Enhancements
68141352A
Service Bulletin/Repair Instructions
3.2L - 3.6L Cylinder Head Assy Multiple cylinder head replacement. If cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people.~ First: Ron Dallison ? Cell (248) 292-9510 Ron.dallison@fcagroup.com ~ Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.~
08-053-16A
Service Bulletin/Repair Instructions
Radio software enhancement.
08-053-16B
Service Bulletin/Repair Instructions
Radio software enhancement.
0805316A
Service Bulletin/Repair Instructions
Radio software enhancement.
0805316B
Service Bulletin/Repair Instructions
Radio software enhancement.
0805316REVA
Service Bulletin/Repair Instructions
RA3/RA4 Radio Software Enhancements
68260253A$
Service Bulletin/Repair Instructions
Transmission If the customer concern is grinding or difficulties getting the transmission into 5th gear and you are working on any 15 MY Challenger, or 16 MY Challenger built before 4/25/2016 an engineering change has been made to the synchronizer material to provide better wear characteristics. Service parts are in stock and available for repairs, part number 68028593A$.
Z5091195A
Service Bulletin/Repair Instructions
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
Z5091195A$
Service Bulletin/Repair Instructions
RES / RHA / REB radio that supports Bluetooth and Hands-Free For issues with Bluetooth, Hands-Free Calling, and/or Voice Commands, DO NOT replace the radio. Diagnose the Hands-Free Module system (also called the Telematics Module). The Telematics Module (and associated components) is the system responsible for these features. A power cycle may be required for the hands-free module for proper diagnosis.~ Please reference; 8T - Navigation/Telecommunication Diagnosis and Testing (DIAGNOSIS AND TESTING - HANDS FREE PHONE)
08-053-16
Service Bulletin/Repair Instructions
Flash: RA3/RA4 Radio Software Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: · **Poor or no connection to cellular network (U.S. market only). · HVAC temperature out of sync with radio display (KL vehicles).** · Intermittently blind spot chime will not turn off (KL vehicles only). · Enable High Definition (HD) feature (RA4 radios located in Canada and Mexico). · Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only). · The Radio may switch from SiriusXM to an AM station by itself. · Uconnect registration always present, can not remove Uconnect account. · Teleprompter does not appear when pressing the Voice Recognition (VR) button. · VR operation cancels while in media mode. · Radio may display previous image before displaying the current image. · Navigation lost vehicle position during route calculation. · Navigation displays are missing after vehicle heading changes. · Navigation giving incorrect guidance to exit the highway. · FM audio may switch to AM after ignition cycle. · Text messages appear as sender?s phone number not their name. VR phone button may not work at times. · Audio muted after AUX device is disconnected. · VR, ? Listen? to text will only play first message. · Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). · Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). · SirusXM station information does not update. · Speed adjusted volume, may not work. · AM or FM seek or tuner soft keys may be missing. · Display screen show ambient temperature as ?- - ? not normal values. Improvements: · **User can pair iPhone with Uconnect via Bluetooth and talk to Siri through Uconnect. · Ability to press VR button for more than one second.**
23-018-16
Service Bulletin/Repair Instructions
Sunroof may open, close or vent by itself while driving. The sunroof may also perform an auto reversal. Auto reverse feature functions properly.
2301816
Service Bulletin/Repair Instructions
Sunroof may open, close or vent by itself while driving. The sunroof may also perform an auto reversal. Auto reverse feature functions properly.
18-047-16
Service Bulletin/Repair Instructions
Flash: 6.2L Powertrain Diagnostic And System Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) and Transmission Control Module (TCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the PCM memory: **P0456 - EVAP System Small Leak. P1611 - Supercharger Bypass Valve Position Sensor 1 Circuit High. P0513 - Invalid Skim Key.** P0300 - Multiple Cylinder Misfire (manual transmission applications only). P1613 - Turbocharger/Supercharger Boost Pressure Sensor/Mass Air Flow Sensor Correlation. P2227 - Barometric Pressure Circuit Performance. P1217 - Active Exhaust Valve 1 Performance. P121B - Active Exhaust Valve 2 Performance. **The P0513 code is set during remote starting the vehicle and nearly simultaneously pressing the Key Fob button against the Keyless Ignition Node (KIN) causing an engine stall.** **In addition the PCM software also enables freeze frame/failure records to be stored for the following Diagnostic Trouble Codes: P0102 - MAF sensor circuit shorted to ground. P0103 - MAF Sensor Circuit shorted High. P0607 - ECU Internal Performance. P060E - Level 2 TPS sensor coherency check has failed. P1610 - Supercharger Bypass Valve Position Sensor 1 Circuit Low. P1611 - Supercharger Bypass Valve Position Sensor 1 Circuit High. P1616 - Supercharger Bypass Valve Position Sensor 2 Circuit Low. P1617 - Supercharger Bypass Valve Position Sensor 2 Circuit High. P1620 - Supercharger Bypass Valve Control Open Circuit. P1627 - Supercharger Bypass Valve Position Sensor 1/2 Correlation. P162A - Supercharger Bypass Valve Actuator Control System - Max PWM Exceeded. P162C - Supercharger Bypass Valve Control Circuit.** In addition, customers may also comment on the following:
1804716
Service Bulletin/Repair Instructions
Powertrain Diagnostic And System Enhancements
68277402A
Service Bulletin/Repair Instructions
Adaptive Cruise Control Sensor 1) If you are replacing this part due to the cluster displaying Clean Radar Sensor in Front of Vehicle or DTC C1266 ACC Sensor Blinded, please verify that there is no blockage in front of the sensor. Blockage can occur from mud, ice, snow, front end damage, bracket damage, the sensor not attached to the bracket properly or an aftermarket fascia installed. This fault can occur intermittently in muddy or icy/snowy conditions and is considered normal operation. Under some circumstances, a misaligned sensor can also cause the C1266 DTC, please complete an alignment procedure. No replacement is required.~ 2) If you are replacing this part due to the cluster displaying ?ACC/FCW Unavailable Service Required?, please check the DTC fault codes. This will indicate which module needs to be serviced (TCM, PCM, ESP/ABS, etc). This fault is not due to the ACC Sensor. No sensor replacement is required.~ 3) If you have fault code DTC C125E ACC Sensor Adjustment Required, please verify that the radar sensor is fully seated in the clips and there is no damage (if clips are damaged on a 2013 or earlier vehicle, order P/N 68085813A$, otherwise please replace the module), please verify there is no blockage to the sensor due to mud, ice, snow, front end damage, bracket damage or the sensor not attached to the bracket properly. Perform the Vertical Alignment and the Electronic Horizontal Alignments procedure as stated in the service manual. Please note, if the horizontal alignment procedure will not complete, check the vertical alignment and confirm that the sensor is seated properly. Rerun the horizontal alignment procedure. No sensor replacement is required. **Hints for running Horizontal Alignment procedure: A) Verify speed is between 45 and 75 mph, B) verify the road is relatively straight with signs, poles, guard rails, etc C) Do not tail a vehicle too closely this inhibits the learning procedure
18-045-16
Service Bulletin/Repair Instructions
Flash: 6.4L Diagnostic And System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience one or more of the following symptoms and/or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): · P1217 - Active Exhaust Valve 1 Performance. · P121B - Active Exhaust Valve 2 Performance. In addition, customers may also comment on the following: · Unable to accurately increase or decrease the cruise control set speed using the resume or set buttons while the instrument cluster is set on metric units. Instead of changing vehicle speed by 1 KPH when pressing the buttons, the vehicle speed will increase approximately 1.6 KPH. · Slight spark knock condition during aggressive high speed driving which may prevent the vehicle from achieving maximum top speed.
1804516
Service Bulletin/Repair Instructions
6.4L Diagnostic And System Improvements
68184587A
Service Bulletin/Repair Instructions
Rotor. Front 2 piece.
0801416
Service Bulletin/Repair Instructions
This bulletin involves reprogramming the Instrument Panel Cluster (IPC) with the latest
RL108213A$
Service Bulletin/Repair Instructions
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
08-083-15 REV B
Service Bulletin/Repair Instructions
Flash: Bass, Mid, Treble Adjustment Causes Erratic Volume Increases This bulletin involves reprogramming the Amplifier (AMP) with the latest available software. The customer may describe when changing the radio tone settings (bass, mid, treble) the volume levels may be erratic. Depending where the volume is set, the volume changes may be very loud or very quiet. Example: When the volume is set to 8 and making adjustments to the tone settings, the volume can increase by 15 db. When the volume is set to 25 and making adjustments to the tone settings, there maybe no volume changes. The customer may also describe when listening with the volume set to 9 there is more bass and less mid/high. When the volume is set to 10 is less bass and more mid/high (WD,WK, W2 and W3 only).
53034160A
Service Bulletin/Repair Instructions
Part Description: Accelerator Pedal Issue Description: Vehicle has accelerator pedal fault code. Before replacing accelerator pedal, be sure to follow fault code diagnostic procedures in service manual. Make sure to check wiring and connectors. DTC P2299 is usually caused by a two footed driver and accelerator pedal should not be replaced for this fault.
05150872A
Service Bulletin/Repair Instructions
Part Description: Powertrain Control Module Issue Description: Before replacing the Powertrain Control Module on 2015-2016 6.2L Supercharged Hellcat equipped Challengers/Chargers for a P2227 (Barometric Pressure Circuit Performance) fault, please call Nick Lynn on his cell (586) 295-0917. If no response is received within 15 minutes, please continue with repair
05184349A
Service Bulletin/Repair Instructions
Before replacing this part for debris issue faults, please call the following people;~ Engineering is seeking information regarding this part.~ Bob Smith ? Cell (248) 202-9458 - Robert.M.Smith@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.~
08-115-15
Service Bulletin/Repair Instructions
Hands Free Feature Inoperative This bulletin involves updating the Hands Free Module (HFM) software. The customer may notice that the hands free feature (Bluetooth) does not work. On further inspection Diagnostic Trouble Code (DTC), U0197 - Lost Communication With Hands Free Phone Module may be found.
68186570A
Service Bulletin/Repair Instructions
Part Description: Central Body Controller (CBC) Issue Description: Prior to replacing the Central Body Controller (CBC) on a 2015 or 2016 Challenger, please contact Greg Meade on (cell) 248-770-5989.~ If no response is received within 15 minutes, then proceed with necessary repair
08-101-15
Service Bulletin/Repair Instructions
Flash: Poor Speaker Sound Performance This bulletin involves updating the Amplifier (AMP) software. The customer may describe one or more of the following symptoms/conditions: ? Speakers not loud enough. ? Speakers buzz/rattle. ? Poor sound quality from speakers. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? B1474-13-Channel 5 Audio Speaker Output - Circuit Open ? B1479-13-Channel 6 Audio Speaker Output - Circuit Open
68239269A
Service Bulletin/Repair Instructions
Part Description: Exhaust Actuator Issue Description: Please call Jason Maltese at cell (248) 931-4179 or email him at emailjason.maltese@fcagroup.com before replacing this part. Engineering may want to visit dealers in the SE Michigan area to investigate this issue. If no answer and if you do not receive a return call within 15 minutes please continue with the normal repair.
05036750A
Service Bulletin/Repair Instructions
Part Description: Powertrain Control Module Issue Description: Before replacing the Powertrain Control Module on 2015-2016 6.2L Supercharged Hellcat equipped Challengers/Chargers for a P2227 (Barometric Pressure Circuit Performance) fault, please call Nick Lynn on his cell (586) 295-0917. If no response is received within 15 minutes, please continue with repair.
05036750A$
Service Bulletin/Repair Instructions
Part Description: Powertrain Control Module Issue Description: Before replacing the Powertrain Control Module on 2015-2016 6.2L Supercharged Hellcat equipped Challengers/Chargers for a P2227 (Barometric Pressure Circuit Performance) fault, please call Nick Lynn on his cell (586) 295-0917. If no response is received within 15 minutes, please continue with repair.
08-095-15
Service Bulletin/Repair Instructions
RA2 And RJ2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: ? Radio Display may freeze or go blank. ? Display shows multiple USB media song titles in the browse menu. ? Backup camera screen may have static lines and/or shutters. ? The backup display may flash the previous image before displaying the current image. ? Can?t cancel compass calibration. ? When in compass calibration and the browse/enter button is pressed, Compass Calibration Failed will be displayed. ? Incorrect blind spot chime. ? After the audio was muted, audio doesn?t resume using Voice Recognition (VR). ? Information from disconnected USB flash drive is still displayed on the radio. ? VR session may not cancel using steering wheel switches. ? Back button on Integrate Center Stack (ICS) may not work at times. ? AM/FM is still audible when USB flash drive is plugged in. ? Radio screen may be black when powered up. ? When using steering wheel controls, the radio presets with start at preset 2 instead of preset 1. ? Unintentionally changing AM/FM stations when trying to scroll up or down a song list. This happens when a USB or Phone is plugged into the USB port. Improvements: ? iPhone functionality improvement to play music after ending calls. ? When SD card is used, phone lists will be properly displayed. ? New feature will not allow changes to settings in accessory mode.
SB-08-095-15
Service Bulletin/Repair Instructions
2015 DODGE CHALLENGER: BULLETIN ON VEHICLES WITH UCONNECT 5.0 AM/FM/BT. RADIO SOFTWARE REQUIRES UPDATING *CN
23-036-15
Service Bulletin/Repair Instructions
Door Panel Armrest Pull Cup Loose And/Or Audio Induced Buzz/Rattle This bulletin involves inspecting/replacing the armrest door pull cup fastener. The customer may describe an audio induced buzz/rattle from the door panel or a loose door armrest pull cup. This condition may be caused by the door panel armrest pull cup attachment screw not tightened securely.
08-083-15 REV-A
Service Bulletin/Repair Instructions
Flash: Bass, Mid, Treble Adjustment Causes Erratic Volume Increases This bulletin involves reprogramming the Amplifier (AMP) with the latest available software. The customer may describe when changing the radio tone settings (Bass, Mid, Treble) the volume levels may be erratic. Depending where the volume is set, the volume changes maybe very loud or very little. Example: Volume set to 8 and making adjustments to the tone settings, the volume can increase by 15 db. Volume set to 25 and making adjustments to the tone settings, there maybe no volume changes.
08-083-15
Service Bulletin/Repair Instructions
Flash: Bass, Mid, Treble Adjustment Causes Erratic Volume Increases This bulletin involves reprogramming the Amplifier (AMP) with the latest available software. The customer may describe when changing the radio tone settings (Bass, Mid, Treble) the volume levels may be erratic. Depending where the volume is set, the volume changes maybe very loud or very little. Example: Volume set to 8 and making adjustments to the tone settings, the volume can increase by 15 db. Volume set to 25 and making adjustments to the tone settings, there maybe no volume changes.
08-081-15
Service Bulletin/Repair Instructions
Unable To Register With Uconnect This bulletin involves retrieving MDN and MEID numbers from the radio. Creating a Star case and recording the MDN and MEID with in the Star Case. The Star center will reply back with an access code that will need to be entered into the radio. The customer may notice that their Uconnect Apps do not work and they can?t register with Uconnect.
18-035-15 REV-B
Service Bulletin/Repair Instructions
Flash: 6.2L / 6.4L Diagnostic And System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. A small number of customers may experience one or more of the following symptoms and/or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs). (LA) Challenger and (LD) Charger (Sales Code ESD Only) ? P0513 - Invalid Skim Key. This code is set during remote starting the vehicle and nearly simultaneously pressing the Key Fob button against the Keyless Ignition Node (KIN), causing an engine stall. In addition the PCM software also enables freeze frame/failure records to be stored for the following Diagnostic Trouble Codes: ? P0102 - MAF sensor circuit shorted to ground. ? P0103 - MAF Sensor Circuit shorted High. ? P0607 - ECU Internal Performance. ? P060E - Level 2 TPS sensor coherency check has failed. ? P1610 - Supercharger Bypass Valve Position Sensor 1 Circuit Low. ? P1611 - Supercharger Bypass Valve Position Sensor 1 Circuit High. ? P1616 - Supercharger Bypass Valve Position Sensor 2 Circuit Low. ? P1617 - Supercharger Bypass Valve Position Sensor 2 Circuit High. ? P1620 - Supercharger Bypass Valve Control Open Circuit. ? P1627 - Supercharger Bypass Valve Position Sensor 1/2 Correlation. ? P162A - Supercharger Bypass Valve Actuator Control System - Max PWM Exceeded. ? P162C - Supercharger Bypass Valve Control Circuit. ? Unable to accurately increase or decrease the cruise control set speed using the resume or set buttons while the instrument cluster is set on metric units. Instead of changing vehicle speed by 1 KPH when pressing the buttons, the vehicle speed will increase approximately 1.6 KPH. ? Slight spark knock condition during aggressive high speed driving which may prevent the vehicle from achieving maximum top speed. ? P1217 - Active Exhaust Valve 1 Performance. ?
SB18-035-15REV-B
Service Bulletin/Repair Instructions
BULLETIN ON POWERTRAIN CONTROL MODULE REPROGRAMMING WITH THE LATEST SOFTWARE *CN
07-005-15 REV-B
Service Bulletin/Repair Instructions
Intermittent Coolant Weepage From Upper Radiator Hose Or Radiator This bulletin involves installing an additional clamp on the upper radiator hose along with replacing the radiator assembly. Customers may experience a slight coolant weepage underhood. After further inspection, the technician may notice coolant weeping from the upper radiator hose connection at the radiator or the radiator itself.
D-15-18
Service Bulletin/Repair Instructions
To announce a VIP LOP Restriction Program on the Multi-Displacement Solenoid (MDS) in an effort to monitor and correct quality issues in a timely and efficient manner
21-006-15 REV-B
Service Bulletin/Repair Instructions
Flash: 845RE Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one or more of the following Symptom/Condition(s) and/or a Malfunction Indicator Lamp (MIL) due to an erroneous Diagnostic Trouble Code (DTC): ? P1DCD - TCM monitoring processor performance multiple clutches locked up. ? P1B13 - Park-By-Wire unintended out of park position. ? P0734 - Gear 4 Shift Incorrect Ratio set in the TCM memory. ? Harsh or erratic 8-6 downshift during freeway driving. ? Harsh or erratic 6-4 and/or 6-3 downshift during city driving. ? Harsh or erratic upshifts while in Sport Mode. ? Less than desired downshift timing (longer time to downshift than expected). ? Less than desired downshift feel during coasting decelerations and while passing. ? Less than desired shift feel when shifting from reverse to drive or drive to reverse while the vehicle is stationary (i.e. garage shift). ? Less than desired upshift feel during normal non-aggressive driving. ? Less than desired powertrain performance at higher altitudes. ? Less than desired paddle shifter operation.
08-031-15 REV-B
Service Bulletin/Repair Instructions
RA3 RA4 Radio Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: ? Intermittently blind spot chime will not turn off (KL vehicles only). ? Enable High Definition (HD) feature, (RA4 radios located in Canada and Mexico). ? Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only). ? The Radio may switch from SiriusXM to an AM station by itself. ? Uconnect registration always present, can not remove Uconnect account. ? Teleprompter does not appear when pressing the Voice Recognition (VR) button. ? VR operation cancels while in media mode. ? Radio may display previous cameras image before displaying the current image. ? Navigation lost vehicle position, during route calculation. ? Navigation displays are missing after vehicle heading changes. ? Navigation giving incorrect guidance to exit the highway. ? FM audio may switch to AM after ignition cycle. ? Text messages appear as sender?s phone number not their name. ? VR phone button may not work at times. ? Audio muted after AUX device is disconnected. ? VR, ? Listen? to text, will only play 1st message. ? Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). ? Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). ? SirusXM station information does not update. ? Speed adjusted volume, may not work. ? AM or FM seek or tuner soft keys may be missing. ? Display screen show ambient temperature as ?- - ? not normal values. Improvements: ? Faster response time when using the Remote Service App (U.S. market only). ? Faster connection time with 911(U.S. market only). ? Keyboard improvements, in the Points Of Interest (POI) section. ? High Definition (HD) radio buffering. ? Spanish translation. ? Radio station, scroll feature. ? D
SB-08-031-15REVB
Service Bulletin/Repair Instructions
SOME VEHICLES NEED RADIO SOFTWARE UPDATE DUE TO INCORRECT NAVIGATION GUIDANCE EXITING HIGHWAY, TELEPROMPTER FAILS TO APPEAR WHEN VOICE RECOGNITION (VR) BUTTON IS PRESSED, BLIND SPOT CHIME INTERMITTENTLY FAILS TO TURN OFF, PREVIOUS RADIO CAMERA IMAGE IS DISPLAYED BEFORE CURRENT IMAGE. MODEL 2015 CHARGER, RAM 4500, 5500, RAM 3500, 2500, 1500 PICKUP, VIPER, CHEROKEE, CHALLENGER, GRAND CHEROKEE, DURANGO, CHRYSLER 300. *PE
08-007-15 REVA
Service Bulletin/Repair Instructions
RG3 RG4 RJ3 RJ4 Radio Enhancements This bulletin involves inspecting and if required, updating the radio software. A small number of customers may experience one or more of the following: ? Blind Spot module beep or chime sound may be heard continuous (KL Only). ? Radio may keep the CAN bus network awake, causing a battery drain. ? Voice Recognition (VR) to set temperature, will indicate wrong setting to rear seat temperature. ? Not possible to set temperature in degree C using the VR (UK vehicles only). ? Teleprompter does not appear when pressing the Voice Recognition (VR) button. ? Voice Recognition (VR) operation cancels while in media mode. ? Radio may display previous cameras image before displaying the current image. ? Navigation lost vehicle position, during route calculation. ? Navigation displays are missing after vehicle heading changes. ? Navigation giving incorrect guidance to exit the highway. ? FM audio may switch to AM after ignition cycle. ? Text messages appear as sender?s phone number not their name. ? Voice Recognition (VR) phone button may not work at times. ? Audio muted after AUX device is disconnected. ? Voice Recognition (VR) , ? Listen? to text, will only play 1st message. ? Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). ? Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). ? Speed adjusted volume, may not work. ? AM or FM seek or tuner soft keys may be missing. ? Display screen show ambient temperature as ?- - ? not normal values. Improvements: ? Spanish translation. ? Radio station, scroll feature. ? Drive Mode: Launch control button, text improvements (LA, LD, LX and ZD Only). ? Displays correct media, song titles and tracks. ? Incoming calls, audio enhancements (LA, LD and LX Only). ? Audio for strong AM stations. ? VR performance. ? Settings can only be changed in run mode, not ACC. ? Notify user wh
03-001-15 REVA
Service Bulletin/Repair Instructions
Rear Half Shaft Vibration This bulletin involves replacing both rear halfshafts. Customers may experience a slight shake/vibration felt in the seat and/or floor, generated from the rear of the vehicle. Condition is most noticeable on very smooth roads, at steady-state cruising speeds 50-80 mph (80-130 kph). Upon further investigation, the concern may be narrowed down to the rear axle shafts.
SB08-031-15REV-A
Service Bulletin/Repair Instructions
RA3 RA4 RADIO ENHANCEMENTS. BULLETIN INVOLVES INSPECTING AND UPDATING RADIO SOFTWARE *CN
09-005-15
Service Bulletin/Repair Instructions
Right Side Engine Cover Missing With Shaker Package This bulletin involves installing the right side engine cover if missing. The customer may notice the right side engine cover is missing. Only the right side engine cover was missed during vehicle assembly, the left side of the engine does not get an engine cover and is not part of this service action.
18-050-15REV.A
Service Bulletin/Repair Instructions
CHRYSLER 2015 DODGE CHALLENGER: REPROGRAMMING THE POWER CONTROL MODULE WITH THE LATEST SOFTWARE. *LJ
18-035-15 REVA
Service Bulletin/Repair Instructions
Flash: 6.2L / 6.4L Diagnostic And System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. A small number of customers may experience one or more of the following symptoms and/or a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs). Symptoms: ? Unable to accurately increase or decrease the cruise control set speed using the resume or set buttons while the instrument cluster is set on metric units. Instead of changing vehicle speed by 1 KPH when pressing the buttons, the vehicle speed will increase approximately 1.6 KPH. ? Slight spark knock condition during aggressive high speed driving which may prevent the vehicle from achieving maximum top speed. DTCs: ? P1217 - Active Exhaust Valve 1 Performance ? P121B - Active Exhaust Valve 2 Performance ? P2227 - Barometric Pressure Circuit Performance
SB-08-047-15REVA
Service Bulletin/Repair Instructions
ON SOME VEHICLES, THE LOW HEADLAMPS BEAMS WOULD BE YELLOW OR A LOT DIMMER COMPARED TO OTHER VEHICLES. MODEL 2015 CHALLENGER, CHARGER, CHRYSLER 300. *PE UPDATED 9/30/2015 *CN
03-001-15
Service Bulletin/Repair Instructions
Rear Half Shaft Vibration This bulletin involves replacing both rear halfshafts. A small number of customers may experience a slight noise of vibration from the rear of the vehicle. Upon further investigation, the concern may be narrowed down to the rear axle.
18-046-15
Service Bulletin/Repair Instructions
Flash: 5.7L Diagnostic And System Improvements This bulletin involves reprogramming of the Powertrain Control Module (PCM) with the latest software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs). ? P219A - Bank 1 Air-Fuel Ratio Imbalance ? P219B - Bank 2 Air-Fuel Ratio Imbalance ? P0307 - Cylinder 7 Misfire ? P2096 - Downstream Fuel Trim System 1 Lean ? P2097 - Downstream Fuel Trim System 1 Rich Additional Symptoms: ? Engine buck or delay feeling during low speed driving. ? Less than desired engine performance during Multiple Displacement System (MDS) mode transitions.
08-047-15 REVA
Service Bulletin/Repair Instructions
Low Beam Headlamps Dim Or Appear Yellow This bulletin involves verifying the current BCM headlamp voltage set point and performing a vehicle reconfiguration if needed. The customer may describe a condition where the low beam headlamps appear dimmer or yellow when compared to a similarly equipped vehicle.
08-047-15
Service Bulletin/Repair Instructions
Low Beam Headlamps Dim Or Appear Yellow This bulletin involves verifying the current BCM headlamp voltage set point and performing a vehicle reconfiguration if needed. The customer may describe a condition where the low beam headlamps appear dimmer or yellow when compared to a similarly equipped vehicle.
07-005-15 REVA
Service Bulletin/Repair Instructions
Intermittent Coolant Weepage From Upper Radiator Hose This bulletin involves installing an additional clamp on the upper radiator hose A small number of customers may experience a slight coolant weepage underhood. After further inspection, the technician may notice coolant weeping from the upper radiator hose connection at the radiator.
19-003-15
Service Bulletin/Repair Instructions
Intermittent Power Steering Noise And/Or Slight Loss Of Assist This bulletin involves draining the vehicle?s existing power steering fluid and refilling with new fluid as well as installing a new power steering fluid caution label. A small number of customers may experience an objectionable noise from the power steering system at times. In addition, they may also experience a slight loss of assist intermittently.
18-016-15 REVA
Service Bulletin/Repair Instructions
Flash: 6.2L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the PCM memory. ? P0300 - Multiple Cylinder Misfire (manual transmission applications only). ? P1613 - Turbocharger/Supercharger Boost Pressure Sensor/Mass Air Flow Sensor Correlation. ? P2227 - Barometric Pressure Circuit Performance In addition, customers may also comment that, with the cluster set on metric units, they are unable to accurately increase or decrease the cruise control set speed using the resume or set buttons. Instead of changing vehicle speed by 1 KPH when pressing the buttons, the vehicle speed will increase approximately 1.6 KPH.
18-016-15REV.A
Service Bulletin/Repair Instructions
CHRYSLER 2015 DODGE CHALLENGER: THIS BULLETIN SUPERSEDES 18-016-15 DATED FEBRUARY 13,2015 WHICH INVOLVES REPROGRAMMING THE POWER CONTROL MODULE UPDATED SOFTWARE. *LJ
21-006-15 REVA
Service Bulletin/Repair Instructions
Flash: 845RE Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one or more of the following concerns. ? Malfunction Indicator Lamp (MIL) illumination with Diagnostic Trouble Code (DTC) P0734 - Gear 4 Shift Incorrect Ratio set in the TCM memory. ? Harsh or erratic 8-6 downshift during freeway driving. ? Harsh or erratic 6-4 and/or 6-3 downshift during city driving. ? Harsh or erratic upshifts while in Sport Mode. ? Less than desired downshift timing (longer time to downshift than expected). ? Less than desired downshift feel during coasting decelerations and while passing. ? Less than desired shift feel when shifting from reverse to drive or drive to reverse while the vehicle is stationary (i.e. garage shift). ? Less than desired upshift feel during normal non-aggressive driving. ? Less than desired powertrain performance at higher altitudes. ? Less than desired paddle shifter operation.
18-026-15
Service Bulletin/Repair Instructions
Flash: 6.4L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module with the latest available software. A small number of customers may experience a slight spark knock condition during aggressive high speed driving. They may state that when this occurs, the vehicle is unable to achieve maximum top speed. No Diagnostic Trouble Codes (DTCs) are associated with this condition. In addition, customers may also comment that, with the cluster set on metric units, they are unable to accurately increase or decrease the cruise control set speed using the resume or set buttons. Instead of changing vehicle speed by 1 KPH when pressing the buttons, the vehicle speed will increase approximately 1.6 KPH.
21-009-15 REV. A
Service Bulletin/Repair Instructions
Flash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one or more of the following concerns. These concerns are broken up per engine and transmission combination. 6.2L engine (sales code ESD) equipped with an 8HP90 transmission (sales code DFE) ? Transmission will not upshift during Wide Open Throttle (WOT) acceleration. ? Harsh or inconsistent coasting downshifts. ? Transmission will not shift into 7th gear during high speed driving. ? Inconsistent or busy shifts during stop and go traffic. ? Inconsistent gear shift patterns when driving on grades. ? Malfunction Indicator Lamp (MIL) Illumination during ABS activated stops with Diagnostic Trouble Code (DTC) P1DCD TCM Monitoring Processor Performance, Multiple Clutches Locked Up. 6.4L engine (sales code ESG) and equipped with an 8HP70 transmission (sales code DFK) ? Inconsistent 1-2 upshifts when first shifting after a cold soak or in colder ambient temperatures. ? Delayed engagement when shifting from reverse to drive. ? Harsh or inconsistent 1-2 upshift during normal driving. ? Harsh of inconsistent coasting 4-3 downshift. ? Harsh or inconsistent gear engagement when shifting to drive or reverse. ? Instrument Panel Cluster (IPC) shows the incorrect gear when in manual mode. ? Harsh of inconsistent shifts during tip-in acceleration from closed throttle. ? Inconsistent gear shift patterns when driving on grades. ? Inconsistent release of Hill Start Assist during tip-in acceleration. ? Transmission upshifts on sweeping curves under track driving conditions. In addition to the above conditions, this software release also enables the capability to capture non Diagnostic Trouble Code (DTC) control module data through the Uconnect Data Recording system.
21-019-15
Service Bulletin/Repair Instructions
Flash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one or more of the following conditions. ? Less than desired upshift performance during Wide Open Throttle (WOT) accelerations. ? Less than desired overall downshift performance during coasting deceleration, braking, or while passing. ? Less than desired transmission performance during Multiple Displacement System (MDS) mode transitions. ? Less than desired light or medium throttle shift performance. In addition to the above conditions, this software release also enables the capability to capture Electronic Control Unit (ECU) data through the Uconnect Data Recording system.
08-031-15
Service Bulletin/Repair Instructions
RA3 RA4 Radio Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: ? Enable High Definition (HD) feature, (RA4 radios located in Canada and Mexico). ? Keyboard improvements, in the Points Of Interest (POI) section. ? Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only). ? The Radio may switch from SiriusXM to an AM station by itself. ? Uconnect registration always present, can not remove Uconnect account. ? Teleprompter does not appear when pressing the Voice Recognition (VR) button. ? VR operation cancels while in media mode. ? Radio may display previous cameras image before displaying the current image. ? Navigation lost vehicle position, during route calculation. ? Navigation displays are missing after vehicle heading changes. ? Navigation giving incorrect guidance to exit the highway. ? FM audio may switch to AM after ignition cycle. ? Text messages appear as sender?s phone number not their name. ? VR phone button may not work at times. ? Audio muted after AUX device is disconnected. ? VR, ? Listen? to text, will only play 1st message. ? Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). ? Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). ? SirusXM station information does not update. ? Speed adjusted volume, may not work. ? AM or FM seek or tuner soft keys may be missing. ? Display screen show ambient temperature as ?- - ? not normal values. Improvements: ? High Definition (HD) radio buffering. ? Spanish translation. ? Radio station, scroll feature. ? Drive Mode: Launch control button, text improvements (LA, LD, LX and ZD Only). ? Making assist calls. ? App functionality and screen displays. ? Displays correct media, song titles and tracks. ? Travel
07-005-15
Service Bulletin/Repair Instructions
Intermittent Coolant Weepage From Upper Radiator Hose This bulletin involves installing an additional clamp on the upper radiator hose A small number of customers may experience a slight coolant weepage underhood. After further inspection, the technician may notice coolant weeping from the upper radiator hose area.
23-010-15
Service Bulletin/Repair Instructions
Removal Of Challenger SRT Hellcat Front Air Dam Shipping Covers This bulletin involves removing the front air dam shipping covers. Bright yellow shipping covers (1) have been added during vehicle production to prevent/lessen damage to the front fascia air dam during vehicle transport (Fig. 1). If the bright yellow shipping covers are not installed on the front fascia air dam (2) (Fig. 1), this bulletin does not apply. No action is required. Fig. 1 Inspect Front Air Dam For Shipping Covers 1 - Bright Yellow Shipping Covers 2 - No Shipping Covers
18-011-15 REV. A
Service Bulletin/Repair Instructions
Flash: 3.6 Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with updated software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: ? U0140 Lost Communication With Body Control Module. Attempting to clear the DTC will be unsuccessful. ? P0300 Multiple Cylinder Misfire. ? P0573 Brake Switch 1 Stuck Off.
18-016-15
Service Bulletin/Repair Instructions
Flash: 6.2L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the PCM memory. ? P0300 - Multiple Cylinder Misfire (manual transmission applications only). ? P1613 - Turbocharger/Supercharger Boost Pressure Sensor/Mass Air Flow Sensor Correlation. ? P2227 - Barometric Pressure Circuit Performance In addition, customers may also comment that, with the cluster set on metric units, they are unable to accurately increase or decrease the cruise control set speed using the resume or set buttons. Instead of changing vehicle speed by 1 KPH when pressing the buttons, the vehicle speed will increase approximately 1.6 KPH.
1801615
Service Bulletin/Repair Instructions
Flash: 6.2L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the PCM memory. ? P0300 - Multiple Cylinder Misfire (manual transmission applications only). ? P1613 - Turbocharger/Supercharger Boost Pressure Sensor/Mass Air Flow Sensor Correlation. ? P2227 - Barometric Pressure Circuit Performance In addition, customers may also comment that, with the cluster set on metric units, they are unable to accurately increase or decrease the cruise control set speed using the resume or set buttons. Instead of changing vehicle speed by 1 KPH when pressing the buttons, the vehicle speed will increase approximately 1.6 KPH.
19-001-15
Service Bulletin/Repair Instructions
Loss Of Power Steering Assist This bulletin involves inspecting the steering gear pinion cover retaining washer and if not present, replacing the steering gear. Pinion Shaft Cover Retaining Washer Missing. The customer may describe loss of power steering assist.
19-001-15 REV. A
Service Bulletin/Repair Instructions
Loss Of Power Steering Assist This bulletin involves inspecting the steering gear pinion cover retaining washer and if not present, replacing the steering gear. Pinion Shaft Cover Retaining Washer Missing. The customer may describe loss of power steering assist.
19-001-15 REV.A
Service Bulletin/Repair Instructions
CHRYSLER: 2015 DODGE CHALLENGER : SOME VEHICLES ARE EXPERIENCING A LOSS OF POWER STEERING ASSIST DUE TO MISSING PINION SHAFT COVER RETAINING WASHER. *LJ
1900115
Service Bulletin/Repair Instructions
Loss Of Power Steering Assist This bulletin involves inspecting the steering gear pinion cover retaining washer and if not present, replacing the steering gear. Pinion Shaft Cover Retaining Washer Missing. The customer may describe loss of power steering assist.
1900115REVA
Service Bulletin/Repair Instructions
Loss Of Power Steering Assist This bulletin involves inspecting the steering gear pinion cover retaining washer and if not present, replacing the steering gear. Pinion Shaft Cover Retaining Washer Missing. The customer may describe loss of power steering assist.
21-009-15
Service Bulletin/Repair Instructions
Flash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one or more of the following concerns. These concerns are broken up per engine and transmission combination. 6.2L engine (sales code ESD) equipped with an 8HP90 transmission (sales code DFE) ? Transmission will not upshift during Wide Open Throttle (WOT) acceleration. ? Harsh or inconsistent coasting downshifts. ? Transmission will not shift into 7th gear during high speed driving. ? Inconsistent or busy shifts during stop and go traffic. ? Inconsistent gear shift patterns when driving on grades. ? Malfunction Indicator Lamp (MIL) Illumination during ABS activated stops with Diagnostic Trouble Code (DTC) P1DCD TCM Monitoring Processor Performance, Multiple Clutches Locked Up. 6.4L engine (sales code ESG) and equipped with an 8HP70 transmission (sales code DFK) ? Harsh or inconsistent 1-2 upshift. ? Harsh of inconsistent coasting 4-3 downshift. ? Harsh or inconsistent gear engagement when shifting to drive or reverse. ? Instrument Panel Cluster (IPC) shows the incorrect gear when in manual mode. ? Harsh of inconsistent shifts during tip-in acceleration from closed throttle. ? Inconsistent gear shift patterns when driving on grades. ? Inconsistent release of Hill Start Assist during tip-in acceleration. ? Transmission upshifts on sweeping curves under track driving conditions.
2100915
Service Bulletin/Repair Instructions
Flash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one or more of the following concerns. These concerns are broken up per engine and transmission combination. 6.2L engine (sales code ESD) equipped with an 8HP90 transmission (sales code DFE) ? Transmission will not upshift during Wide Open Throttle (WOT) acceleration. ? Harsh or inconsistent coasting downshifts. ? Transmission will not shift into 7th gear during high speed driving. ? Inconsistent or busy shifts during stop and go traffic. ? Inconsistent gear shift patterns when driving on grades. ? Malfunction Indicator Lamp (MIL) Illumination during ABS activated stops with Diagnostic Trouble Code (DTC) P1DCD TCM Monitoring Processor Performance, Multiple Clutches Locked Up. 6.4L engine (sales code ESG) and equipped with an 8HP70 transmission (sales code DFK) ? Harsh or inconsistent 1-2 upshift. ? Harsh of inconsistent coasting 4-3 downshift. ? Harsh or inconsistent gear engagement when shifting to drive or reverse. ? Instrument Panel Cluster (IPC) shows the incorrect gear when in manual mode. ? Harsh of inconsistent shifts during tip-in acceleration from closed throttle. ? Inconsistent gear shift patterns when driving on grades. ? Inconsistent release of Hill Start Assist during tip-in acceleration. ? Transmission upshifts on sweeping curves under track driving conditions.
21-006-15
Service Bulletin/Repair Instructions
Flash: 845RE Transmission Shift Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one or more of the following concerns. ? Less than desired downshift timing (longer time to downshift than expected). ? Less than desired downshift feel during coasting decelerations and while passing. ? Less than desired shift feel when shifting from reverse to drive or drive to reverse while the vehicle is stationary (i.e. garage shift). ? Less than desired upshift feel during normal non-aggressive driving. ? Less than desired powertrain performance at higher altitudes. ? Less than desired paddle shifter operation.
22-001-15
Service Bulletin/Repair Instructions
Incorrect Tire Pressure Sensor This bulletin involves inspecting and replacing tire valve stems and Tire Pressure Monitor (TPM) sensors, if required. Vehicles included on the RRT VIN list may have been built with the incorrect valve stems and TPM sensors.
18-011-15
Service Bulletin/Repair Instructions
Flash: U0140 Lost Communication With Body Control Module This bulletin involves reprogramming the Powertrain Control Module (PCM) with updated software. During normal diagnostics a technician may find Diagnostic Trouble Code (DTC) U0140 Lost Communication With Body Control Module. Attempting to clear the DTC will be unsuccessful.
08-007-15
Service Bulletin/Repair Instructions
RG3 RG4 RJ3 RJ4 Radio Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: ? Voice Recognition (VR) to set temperature, will indicate wrong setting to rear seat temperature. ? Not possible to set temperature in degree C using the VR (UK vehicles only). ? Teleprompter does not appear when pressing the Voice Recognition (VR) button. ? Voice Recognition (VR) operation cancels while in media mode. ? Radio may display previous cameras image before displaying the current image. ? Navigation lost vehicle position, during route calculation. ? Navigation displays are missing after vehicle heading changes. ? Navigation giving incorrect guidance to exit the highway. ? FM audio may switch to AM after ignition cycle. ? Text messages appear as sender?s phone number not their name. ? Voice Recognition (VR) phone button may not work at times. ? Audio muted after AUX device is disconnected. ? Voice Recognition (VR) , ? Listen? to text, will only play 1st message. ? Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). ? Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). ? Speed adjusted volume, may not work. ? AM or FM seek or tuner soft keys may be missing. ? Display screen show ambient temperature as ?- - ? not normal values. Improvements: ? Spanish translation. ? Radio station, scroll feature. ? Drive Mode: Launch control button, text improvements (LA, LD, LX and ZD Only). ? Displays correct media, song titles and tracks. ? Incoming calls, audio enhancements (LA, LD and LX Only). ? Audio for strong AM stations. ? VR performance. ? Settings can only be changed in run mode, not ACC. ? Notify user when messaging features are not supported on certain phones/devices. ? Shows direction and distance for POI when using VR.
9003206
Service Bulletin/Repair Instructions
Part Description: Wheel Issue Description: Wheel appears to have debris or film built up in black wheel pockets. Be sure to clean wheel first to see if film/debris can be removed before ordering new wheel.~
08-079-14 REV. C
Service Bulletin/Repair Instructions
RA3 RA4 Radio Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only) The Radio may switch from SiriusXM to an AM station by itself Uconnect registration always present, can not remove Uconnect account Teleprompter does not appear when pressing the Voice Recognition (VR) button VR operation cancels while in media mode Radio may display previous cameras image before displaying the current image Navigation lost vehicle position, during route calculation Navigation displays are missing after vehicle heading changes Navigation giving incorrect guidance to exit the highway FM audio may switch to AM after ignition cycle Text messages appear as sender?s phone number not their name. VR phone button may not work at times Audio muted after AUX device is disconnected VR, ? Listen? to text, will only play 1st message Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only) SirusXM station information does not update. Speed adjusted volume, may not work AM or FM seek or tuner soft keys may be missing Display screen show ambient temperature as ?- - ? not normal values.Improvements: High Definition (HD) radio buffering. Spanish translation. Radio station, scroll feature. Drive Mode: Launch control button, text improvements (LA, LD, LX and ZD Only). Making assist calls. App functionality and screen displays. Displays correct media, song titles and tracks. Travel Link, Points Of Interest (POI), displaying movies and favorites. Incoming calls, audio enhancements (LA, LD and LX Only). Audio for strong AM stations. VR performance. Settings can only be changed in run mode, not ACC.
08-079-14REV.C
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
0807914REVC
Service Bulletin/Repair Instructions
RA3 RA4 Radio Enhancements if required, updating the radio software. A small number of customers may experience one or more of the following: Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only). The Radio may switch from SiriusXM to an AM station by itself. Uconnect registration always present, can not remove Uconnect account. Teleprompter does not appear when pressing the Voice Recognition (VR) button. VR operation cancels while in media mode. Radio may display previous cameras image before displaying the current image. Navigation lost vehicle position, during route calculation. Navigation displays are missing after vehicle heading changes. Navigation giving incorrect guidance to exit the highway. FM audio may switch to AM after ignition cycle. Text messages appear as sender?s phone number not their name. VR phone button may not work at times. Audio muted after AUX device is disconnected. VR, ? Listen? to text, will only play 1st message. Drive Mode: Eco, sport or normal setting may not be saved after key cycle (LA, LD, LX and ZD Only). Drive Mode: Shift light On/Off, out of sync (LA, LD, LX and ZD Only). SirusXM station information does not update. Speed adjusted volume, may not work. AM or FM seek or tuner soft keys may be missing. Display screen show ambient temperature as ?- - ? not normal values.Improvements: High Definition (HD) radio buffering. Spanish translation. Radio station, scroll feature. Drive Mode: Launch control button, text improvements (LA, LD, LX and ZD Only). Making assist calls. App functionality and screen displays. Displays correct media, song titles and tracks. Travel Link, Points Of Interest (POI), displaying movies and favorites. Incoming calls, audio enhancements (LA, LD and LX Only). Audio for strong AM stations. VR performance. Settings can only be changed in run mode, not ACC. Notify user when messaging features are not s
0807914b
Service Bulletin/Repair Instructions
RA3 RA4 Radio Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only). The Radio may switch from SiriusXM to an AM station by itself. Uconnect registration always present, can not remove Uconnect account. Teleprompter does not appear when pressing the Voice Recognition (VR) button. VR operation cancels while in media mode. Radio may display previous cameras image before displaying the current image.
23-037-14
Service Bulletin/Repair Instructions
Wind Noise At The Left And/Or Right Door This bulletin involves repositioning the outer door mounted window seal flag. The customer may describe a wind noise at the left and/or right door.
2303714
Service Bulletin/Repair Instructions
Wind Noise At The Left And/Or Right Door This bulletin involves repositioning the outer door mounted window seal flag. The customer may describe a wind noise at the left and/or right door.
08-107-14
Service Bulletin/Repair Instructions
Radio Loss Of Audio Signal Or Static Interference On FM Stations This bulletin involves verifying the static concern on FM radio station frequencies and if applicable, replacing the inner combination tail stop backup lamp. The customer may describe a loss of audio signal or static interference on FM radio stations.
08-107-14A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
0810714
Service Bulletin/Repair Instructions
Radio Loss Of Audio Signal Or Static Interference On FM Stations This bulletin involves verifying the static concern on FM radio station frequencies and if applicable, replacing the inner combination tail stop backup lamp. The customer may describe a loss of audio signal or static interference on FM radio stations.
08-104-14
Service Bulletin/Repair Instructions
RA2 And RJ2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Backup camera screen may have static lines and/or shutters. The backup display may flash the previous image before displaying the current image. Can?t cancel compass calibration. When in compass calibration and the browse/enter button is pressed, Compass Calibration Failed will be displayed. Incorrect blind spot chime. After the audio was muted, audio doesn?t resume using Voice Recognition (VR). Information from disconnected USB flash drive is still displayed on the radio. VR session may not cancel using steering wheel switches. Back button on Integrate Center Stack (ICS) may not work at times. AM/FM is still audible when USB flash drive is plugged in. Radio screen may be black when powered up. When using steering wheel controls, the radio presets with start at preset 2 instead of preset 1. Unintentionally changing AM/FM stations when trying to scroll up or down a song list. This happens when a USB or Phone is plugged into the USB port.Improvements: iPhone functionality improvement to play music after ending calls. When SD card is used, phone lists will be properly displayed. New feature will not allow changes to settings in accessory mode.
0810414
Service Bulletin/Repair Instructions
RA2 And RJ2 Radio Software Enhanc
24-008-14
Service Bulletin/Repair Instructions
HVAC Blower Intermittently Cuts out When Set On High This bulletin involves selectively erasing and reprogramming HVAC Control Module with new software or replacing the HVAC Control Module. Customers may experience the blower cutting out when HVAC blower is set to high on Manual Temperature Control (MTC) vehicles or while using high blower in manual mode on Automatic Temperature Controls (ATC) vehicles.
24-008-14 REV. A
Service Bulletin/Repair Instructions
HVAC Blower Intermittently Cuts out When Set On High. This bulletin involves selectively erasing and reprogramming HVAC Control Module with new software or replacing the HVAC Control Module. Customers may experience the blower cutting out when HVAC blower is set to high on Manual Temperature Control (MTC) vehicles or while using high blower in manual mode on Automatic Temperature Controls (ATC) vehicles.
24-008-14REV.A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
08-079-14 REV. B
Service Bulletin/Repair Instructions
RA3 RA4 Radio Update For Ignition Off Battery Draw This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience a low battery condition due to the radio remaining powered up after the ignition has been turned off. Also the customer may notice when the radio is set to an SiriusXM station it may switch by itself to an AM station.
08-079-14REV.B
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
0807914a
Service Bulletin/Repair Instructions
RA3 RA4 Radio Update For Ignition Off Battery Draw
21-030-14 REV. A
Service Bulletin/Repair Instructions
845RE Transmission Quick Learn Procedure This bulletin provides information on how to perform the new scan tool based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to improve a customer's concern of poor shift quality. Customers may indicate that their transmission shift quality does not meet their expectations.
21-030-14REV.A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
2103014
Service Bulletin/Repair Instructions
Transmission Quick Learn Procedure
23-031-14
Service Bulletin/Repair Instructions
Satin Finish Care And Protection Satin paint is a unique exterior treatment that gives your Challenger SRT Hellcat a distinctive appearance. Satin finishes are different from other automotive paints and need special care to maintain their appearance. Typical gloss paints use a high gloss clear-coat finish that reflects light and gives a shiny appearance. A satin finish uses a different coating that diffuses light, providing a unique ?flat? finish. Unlike a typical high gloss clear-coat, damage to the satin coating (such as scratches or wear from aggressive cleaning) cannot be polished or buffed out. Once an areais damaged or becomes shiny, the ?flat? appearance cannot be restored.
2303114
Service Bulletin/Repair Instructions
Satin Finish Care And Protection
08-079-14 REV. A
Service Bulletin/Repair Instructions
RA3 RA4 Radio Update For Ignition Off Battery Draw This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience a low battery condition due to the radio remaining powered up after the ignition has been turned off.
08-079-14REV.A
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
0807914
Service Bulletin/Repair Instructions
RA3 RA4 Radio Update For Ignition Off Battery Draw
21-012-14 REV. B
Service Bulletin/Repair Instructions
8 Speed Transmission Shift Adaptation, Drive Learn Procedure This bulletin involves performing a Transmission Adaptation Learn procedure based on a subjective shift quality rating evaluation.The adaptation drive learn procedure must be performed on all 8-speed transmissions when the transmission is repaired/replaced and/or the Valve Body/TCU assembly (mechatronic) is replaced, or when the adaptation memory cells are cleared with the wiTECH diagnostic scan tool. Customers may indicate that their transmission shift quality does not meet their expectations.
21-030-14
Service Bulletin/Repair Instructions
845RE Transmission Quick Learn Procedure This bulletin provides information on how to perform the new scan tool based transmission Quick Learn procedure. This procedure is required after certain transmission repairs or to remedy a customer?s concern of poor shift quality. Customers may indicate that their transmission shift quality does not meet their expectations.
2101214
Service Bulletin/Repair Instructions
8 Speed Transmission Shift Adaptation, Drive Learn Procedure This bulletin involves performing a Transmission Adaptation Learn procedure based on a subjective shift quality rating evaluation.The adaptation drive learn procedure must be performed on all 8-speed transmissions when the transmission is repaired/replaced and/or the Valve Body/TCU assembly (mechatronic) is replaced, or when the adaptation memory cells are cleared with the wiTECH diagnostic scan tool. Customers may indicate that their transmission shift quality does not meet their expectations.
23-026-14
Service Bulletin/Repair Instructions
Wind Noise At The Left And/Or Right Door This bulletin involves repositioning the outer door mounted window seal flag. The customer may describe a wind noise at the left and/or right door.
2302614
Service Bulletin/Repair Instructions
Wind Noise At The Left And/Or Right Door This bulletin involves repositioning the outer door mounted window seal flag. The customer may describe a wind noise at the left and/or right door.
08-079-14
Service Bulletin/Repair Instructions
Flash: RA3 RA4 Radio Ignition Off Battery Draw This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience a low battery condition due to the radio remaining powered up after the ignition has been turned off.
9002519
Service Bulletin/Repair Instructions
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~