9100645
Service Bulletin/Repair Instructions
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
9100645
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
101232
Plate - Planetary
9004009
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
9004350
GEAR MOTOR, Transfer Case The gear motor assembly is shipped in AWD/2WD position. The transfer case needs to be positioned in AWD/2WD position to properly assemble gear motor to T-Case. Please reference Star Online publication S2121000003 for further details. Do not have the transfer case in in another position other than AWD/2WD and rotate the motor to align the bolt holes as this could result in damage to the gear motor.
S2121000003
Transfer Case Gear Motor/Actuator Installation Guidelines.
9001784
Mechanical rocker arm, intake, 1.7 ratio.
9004275
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
23-015-20
Disinfectant Solution Recommended for COVID-19
08-049-20
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
31-003-19
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31-005-19
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31-006-19
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
3100319
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100519
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100619
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
9003502
Key Blank With Transmitter The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~Before 3rd quarter -2017. For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.
68332810
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
05183348A$
KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the blade key (no immobilizer & no transmitter) P/N 05018689AA can be offered to the customer as an alternative option. (This applies to vehicles with the sale code GXR only). ~ For the vehicles with the sales code GXX the Blade Key (immobilizer only & no transmitter) P/N 05134937AA can be offered to the customer as an alternative option.
05183348A
KEY BLANK WITH TRANSMITTER The key with an integrated FOB P/N 05183348AA is temporarily unavailable. The supplier is currently working on a functional replacement. Currently, for customer satisfaction, the immobilizer blade key (no integrated FOB) P/N 05018689AA can be offered to the customer as an alternative option. For any details please contact FCA Engineering: Cell (248) 408-9068 Boris Prishkolnik
R2118796A
Valve Body. These may cause over drive cycling.
RL108213A$
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
9003215
Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
9002887
Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
9002828
Part Description: Insulator in Lever Assembly - Valve Body - Trans Issue Description: The manual valve insulator, attaching rivet and an instruction sheet are now available as a kit. If the insulator requires replacement please order 68253099AA. Note: Insulator color is not relevant for service
08-069-14
UConnect Hands Free Module Fails To Respond Due To Module Lock Up This bulletin involves replacing the Hands Free Module (HFM) if required. The HFM fails to operate causing the UConnect Hands Free Communications system to not respond when system activation is attempted by the customer. Further diagnosis may reveal that when the wiTECH® scan tool is used to read Diagnostic Trouble Codes (DTCs) the tool indicates that the module is not responding. Other modules on the bus may display loss of communication with the HFM. If the Hands Free Communication system is unresponsive then the HFM may require electronic reset.To perform a electronic reset, turn off the vehicle and pull the Ignition Off Drain (IOD) fuse. Wait a few minutes before reinstalling the IOD fuse and checking if the HFM is communicating. If the HFM still will not communicate, then normal No Response diagnostic should be performed. If the HFM is working properly, the module should be replaced to prevent this condition from happening again.
9002872
56045489A$ - Neutral Safety Switch - Trans Assy 06036369AA Screw and Washer is now available as a service part , 2 required to attach Neutral Start Switch
9002519
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
14-002-13 REV. A
Fuel Spit Back During Refueling Due To Inlet Check Valve (X48 Lifetime Warranty Extension) This bulletin involves replacing the fuel filler tube if the condition occurs.When removing the existing fuel filler tube note how it comes out to aid in installation of the new part. Some customers may experience a fuel spit back condition during a refueling event.
14-002-13REV.A
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
14-002-13
Fuel Spit Back During Refueling Due To Inlet Check Valve (X48 Lifetime Warranty Extension) This bulletin involves replacing the fuel filler tube if the condition occurs. NOTE: When removing the existing fuel filler tube note how it comes out to aid in installation of the new part. Some customers may experience a fuel spit back condition during a refueling event.
SB-14-002-13
JEEP: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. DUE TO INLET CHECK VALVE, WHEN REFUELING VEHICLE, THE FUEL WOULD SPIT BACK AND THE FUEL FILLER TUBE NEEDS TO BE REPLACED. MODEL 2005-2006 DURANGO. *PE
D-12-07
CHRYSLER/DODGE: FUEL TANK INLET CHECK VALVE (FUEL FILLER TUBE). *KB UPDATED 8/17/12. *PE
14-001-12
CHRYSLER/DODGE: FUEL SPIT BACK DURING REFUELING. *KB UPDATED 5/14/2012. *JS
SB-18-014-09
CHRYSLER/JEEP: FLASH: ESP SYSTEM MAY PREMATURELY ACTIVATE MOMENTARILY WHEN NEGOTIATING A CURVE OR MIL ILLUMINATION DUE TO DIAGNOSTIC TROUBLE CODE P0340, P0344 OR P0116. THIS INVOLVES SELECTIVELY ERASING AND REPROGRAMMING THE POWERTRAIN CONTROL MODULE (PCM) WITH NEW SOFTWARE. *PE UPDATED 5/24/10. *PE
2500108
POSITIVE CRANKCASE VENTILATION (PCV) SYSTEM FREEZES IN EXTREME COLD AMBIENT TEMPERATURES -- INVOLVES INSTALLING REVISED PCV SYSTEM COMPONENTS. *NJ
2304106
EXTERIOR LAMP - LENS FOGGING. *NJ
1802707
MIL ILLUMINATION DUE TO EGR POSITION SENSOR DTC - P0404, P0405, P0406. *KB
2100507
IMPROVED HILL CLIMB CAPABILITY IN REVERSE OR DTC'S P1713 / P1776. *KB
2100206
FLASH 42RLE - IMPROVED HILL CLIMB CAPABILITY IN REVERSE OR DIAGNOSTIC TROUBLE CODES (DTC) P1713/P1776. *KB
2304706
CRACKED WINDSHIELD DUE TO BEING HIT BY A FOREIGN OBJECT LIKE A STONE. *KB
0300306
AXLE FLUID LEVEL. *KB
0803006
POWERTRAIN CONTROL MODULE INITIALIZATION. *KB
1802406
ENGINE CYLINDER MISFIRE OR IGNITION COIL MALFUNCTION DURING HEAVY RAIN OR CAR WASH. *TT
1800106
STARSCAN@/STARMOBILE ABORT RECOVERY PROCEDURES. *TT
1801806
FLASH: MIL ILLUMINATION AT START-UP DUE TO DTC P2112 OR P1521. *TT
2101705
FLASH: 42RLE - IMPROVED HILL CLIMB CAPABILITY IN REVERSE OR DTC'S P1713 / P1776. *TT
06009
STEERING ANGLE SENSOR (SAS) WHICH MAY CAUSE ONE OR MORE DIAGNOSTIC TROUBLE CODES - U0429, C1219, C123F, C1241 - REPAID RESPONSE TRANSMITTAL. *TT
1400106
LOOSE FUEL CAP MESSAGE OR MALFUNCTION INDICATOR LAMP ILLUMINATION FOR DIAGNOSTIC TROUBLE CODE P0457 - EVAP SYSTEM - LOOSE FUEL CAP. *TT
1803505
FLASH:MIL ILLUMINATION AT START-UP DUE TO DTC P2112 OR P1521. *AK
0806005
NO ENGINE CRANK - LOSS OF COMMUNICATIONS WITH FRONT CONTROL MODULE. *AK
05035
RAPID RESPONSE TRANSMITTAL SERVICE ACTION TEST AND REPLACE BATTERY AS NECESSARY. *TS
1900805
REVISED POWER STEERING SYSTEM BLEEDING PROCEDURES. *SC
2100903
AUTOMATIC TRANSMISSION DIAGNOSTIC TEARDOWN PROCEDURE. VARIOUS MODELS INCLUDING THE 2004 RAM TRUCK, DURANGO, SEBRING CONVERTIBLE, CHEROKEE, VISION, NEON, AND VOYAGER. *TT *SC
16
CUSTOMER SATISFACTION NOTIFICATION E16 - TRANSMISSION COOLER RETURN FILTER. DELAYED ENGAGEMENT WHEN THE SHIFTER IS PLACED INTO GEAR AFTER THE ENGINE HAS BEEN OFF FOR MORE THAN 12 HOURS. *TT
2101505
45RFE/545RFE TRANS - DELAYED ENGAGEMENT DUE TO COOLER RETURN FILTER REPLACEMENT. *SC
2101605
RFE TRANSMISSION - DELAYED ENGAGEMENT AFTER AN EXTENDED OFF PERIOD. *SC
2401305
AIR CONDITIONING (A/C) COOLING COIL ODOR. *TT
2101205
NEW 42RLE VARIABLE LINE PRESSURE TRANSMISSION (VLP). *TT
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.