Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
9004009
Service Bulletin/Repair Instructions
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
9004275
Service Bulletin/Repair Instructions
KEY, Master If replacing the key/FOBIK on a WJ, KJ, TJ, or PT Cruiser, use the "AC" NIC level part number. The "AB" NIC level will not program to these platforms. For all other platforms, if the "AB" NIC level will not program to the vehicle, use the "AC" NIC level part and submit a part warranty.
23-015-20
Service Bulletin/Repair Instructions
Disinfectant Solution Recommended for COVID-19
08-049-20
Service Bulletin/Repair Instructions
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
31-003-19
Service Bulletin/Repair Instructions
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31-005-19
Service Bulletin/Repair Instructions
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31-006-19
Service Bulletin/Repair Instructions
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
3100319
Service Bulletin/Repair Instructions
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100519
Service Bulletin/Repair Instructions
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100619
Service Bulletin/Repair Instructions
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
68332810
Service Bulletin/Repair Instructions
Service - Four Piece Oil Pan Gasket All Cummins Equipped Vehicles ONLY - The replacement oil pan gasket can be a four piece gasket rather than a single piece gasket. This applies to Cummins 5.9L and 6.7L engines only. Installation: 1. Clean the oil pan T-joints.~ 2. Fill the T-joint between the pan rail/gear housing and pan rail/rear seal retainer with sealant. Use Mopar® Silicone Rubber Adhesive Sealant or equivalent. 3. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the oil pan flange.~ 4. The four piece gasket will need to be assembled to make a complete oil pan gasket. 5. Lay the oil pan gasket(s) onto the oil pan flange.~ 6. Ensure the oil pan gasket segment joints are properly aligned. 7. Apply a 2-mm [0.063-in] bead of Mopar Engine Sealant RTV Silicone Rubber Adhesive, to the top of the oil pan gasket.~ 8. Install the oil pan. Starting from the center and working outward, tighten the oil pan bolts to 28 N·m [21 ft. lbs.].
R2118796A
Service Bulletin/Repair Instructions
Valve Body. These may cause over drive cycling.
RL108213A$
Service Bulletin/Repair Instructions
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
D-16-02
Service Bulletin/Repair Instructions
(X60) FUEL TANK/VAPOR CANISTER - 2004-2005-TOWN AND COUNTRY (RS) AND CARAVAN/GRAND CARAVAN (RS)
D-16-02 X60
Service Bulletin/Repair Instructions
Extended Warranty on the Fuel Tank/Vapor Cannister
D1602X60
Service Bulletin/Repair Instructions
Extended Warranty on the Fuel Tank/Vapor Cannister
9003215
Service Bulletin/Repair Instructions
Part Description: 5.7L Long Block Issue Description: This 5.7L Long Block Assembly is compatible with both EGR and Non-EGR applications. An EGR Block-Off Plate (53032739AA) must be ordered when installing this Long Block Assembly in a Non-EGR application. Unless, the EGR Block-Off Plate is being transferred from the old engine.
9002887
Service Bulletin/Repair Instructions
Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
9002519
Service Bulletin/Repair Instructions
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
08-008-13
Service Bulletin/Repair Instructions
Headlights Fail To Illuminate, Or Illuminate And Then Turn Off (X45 Lifetime Warranty Extension) This bulletin is intended to serve as an aid in diagnosis and testing of the headlamp switch assembly.This bulletin involves removing and replacing the headlamp switch if necessary. The vehicle operator may describe one or both of the following conditions: With the headlamp switch in the ON position, both headlights fail to illuminate while the park lamps remain illuminated. With the headlamp switch in the ON position, both headlights illuminate and then extinguish while the park lamps remain illuminated. The customer may indicate that the condition is intermittent and can be corrected if the headlamp switch is turned off and on.
SB-08-008-13
Service Bulletin/Repair Instructions
CHRYSLER: THE PARK LAMPS REMAIN ILLUMINATED WHEN BOTH HEADLAMPS ARE ON AND THEN OFF, OR BOTH HEADLIGHTS FAIL TO ILLUMINATE WHILE PARK LAMPS REMAIN ILLUMNATED AFTER SWITCHING ON. MODELS 2005-2006 TOWN & COUNTRY, VOYAGER, GRAND CARAVAN, CARAVAN, GRAND VOYAGER. *PE
21-001-13
Service Bulletin/Repair Instructions
MIL Illumination - DTC P1776 Solenoid Switch Valve Latched in LR Position
SB-08-052-12
Service Bulletin/Repair Instructions
DODGE/CHRYSLER: BEHAVIOR OF HEADLAMP SWITCH FUNCTION MAY IMPACT LIGHTING SYSTEMS SUCH AS OVERLOAD SPIKE OF ELECTRICAL SYSTEMS, TURNING OFF OR UNANTICIPATED ILLUMINATION, FLICKERING OR DIMMING OF EXTERIOR AND/OR INTERIOR LIGHT WITH ENGINE IS AT IDLE SPEED, OR SINGLE LAMP IN EITHER INTERIOR OR EXTERIOR LIGHTING SYSTEM. MODELS 2005-2006 TOWN & COUNTRY, VOYAGER, CARAVAN AND GRAND CARAVAN. *PE
CS-J-38
Service Bulletin/Repair Instructions
DODGE/CHRYSLER: SUPPLEMENTAL FRONT AIRBAG SENSORS ON ABOUT 310,000 CERTAIN VEHICLES MAY CRACK UNDER CERTAIN CONDITIONS AND ALLOW WATER TO ENTER INTO THE SENSOR. THESE SENSORS WERE ADDED TO ENHANCE THE PERFORMANCE OF THE VEHICLE'S AIRBAG SYSTEM; HOWEVER, A CRACKED SENSOR MAY NOT OPERATE PROPERLY IN A FRONTAL CRASH. A CRACKED SENSOR CAN ALSO ILLUMINATE THE AIRBAG WARNING LIGHT. RIGHT AND LEFT SUPPLEMENTAL FRONT AIRBAG SENSORS MUST BE REPLACED AND THE SENSOR WIRING HARNESS CONNECTORS MUST BE INSPECTED AND REPLACED, IF NECESSARY. CSC LETTER WAS REC'D. *PE
06
Service Bulletin/Repair Instructions
LEAKING COOLANT AT THE HEATER TUBE CRIMPS. CUSTOMER SATISFACTION NOTIFICATION F06 - UNDERBODY HEATER HOSES. *TT
01
Service Bulletin/Repair Instructions
THE UNDERBODY REAR A/C AND HEATER TUBE MOUNTING BRACKETS MAY HAVE INSUFFICIENT CORROSION PROTECTION - CUSTOMER SATISFACTION NOTIFICATION F01. *TT