TTB-24-001 Rv5
Service Bulletin/Repair Instructions
Tips & Tricks Revision 05 Summary. Applicability: All Models-Sygic Navigator App software bug for iOS Apple devices
Vehicle report
2010 DUCATI MULTISTRADA 1200
Service bulletins
40 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
TTB-24-001 Rv4
Service Bulletin/Repair Instructions
Tips & Tricks Revision 04 Summary. Applicability: Multistrada-Possible erratic idling rpm and hard starting, and engine noise. Hypermotard-Possible hard starting issues.
TTB-24-001Rev 3
Service Bulletin/Repair Instructions
Tips & Tricks Revision 03 Summary. Applicability: Multistrada-Racing exhaust applicability. Hypermotard-Possible oil seep, loose handlebar feel, gearchange lever pin, standard faring elements characteristics.
SRV-SRB-24-001
Service Bulletin/Repair Instructions
Procedure for Assessing Front Fork Oil Leaks. Applicability: All Models. This service repair bulletin informs dealers and service managers of the assessment criteria for identifying front fork-related defects. The purpose is prevent technicians from mistaking oozing oil or assembly grease, for legitimate defects. The bulletin further provides examples and pictures for clarification.
SRV-SRB-23-073
Service Bulletin/Repair Instructions
Rear Brake System Update Summary. Applicability: All Models. This Service Bulletin replaces and cancels bulletin SRV-SRB-23-060 published on 12/19/2023. This service bulletin informs dealers and service managers of the availability of new rear brake hoses intended to address wear of the brake lever stroke, resulting from routine use, over time.
TTB-23-001rev16
Service Bulletin/Repair Instructions
Tips & Tricks Summary Rev. 16 Summary: Applicability: Multistrada-Orientation of the side stand springs, and the configuration of aluminum side panniers. Panigale-Wrong mileage deadline on service warning panel. All Models-Final drive chain oxidation.
TTB-23-001 rev15
Service Bulletin/Repair Instructions
Tips & Tricks Summary Rev. 15 Summary: Applicability: Multistrada. Availability and characteristics of a particular racing exhaust, and possible abnormal play of passenger seat.
SRV-SRB-23-053
Service Bulletin/Repair Instructions
Rear Brake System Update Summary. Applicability: All Models. This service repair bulletin provides a quick reference table for available rear brake updates. It replaces and cancels service bulletin SRV-SRB-23-051 published on 09/27/2023.
TTB-23-001 rev13
Service Bulletin/Repair Instructions
Tips & Tricks Summary Rev. 13 Summary: Applicability: Incorrect evaluation of the wear condition of front wheel bearings, and Error C1134 â High DRL temperature (update) for the Multistrada. Melting of coolant distributor due to engine overheating for all models.
SRV-SRB-23-040
Service Bulletin/Repair Instructions
Checking Surface Wear on the Front Brake Caliper Connection Hose. Applicability: Multistrada 1200 MY 2010-2014 (all versions)' Multistrada 1200 MY 2015-2018 (all versions); Multistrada 1260 MY 2018-2020 (all versions). This service repair bulletin informs dealers and service managers that a potential exists for front brake hose surface wear in the applicable models. It goes on to inform that the cause is incorrect routing of the hoses after certain routine service and maintenance procedures. The bulletin also refers service providers to the appropriate manual for further guidance and instruction.
SRV-SRB-23-036
Service Bulletin/Repair Instructions
Guided Diagnosis for Front Brake System Bleeding. Applicability: All Models. This Service Bulletin replaces and cancels the previous bulletin SRV-SRB-20-014 published on 4/17/2020. It provides dealers and service managers with needed information to correctly bleed the front brake system of the various Ducati models. This bulletin further refers the reader to an attached diagnosis guide. The referenced guide/annex is available to NHTSA upon request.
SRV-SRB-23-037
Service Bulletin/Repair Instructions
Finial Drive Chain Maintenance Precautions. Applicability: All Models and Model Years (except XDiavel). This Service Bulletin replaces and cancels the previous bulletins: SRV-SRB-18-030 published on 05/11/2018, SRV-SRB-19-046 published on 12/31/2019, SRV-SRB-20-050 published on 11/24/2020. It provides dealers and service managers additional final drive chain care to ensure optimum performance and longevity for the chain. this includes cleaning, lubricating, inspecting and tension guidelines.
SRV-SRB-23-018R1
Service Bulletin/Repair Instructions
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine_Rev.01. Applicability: All Models. This service repair bulletin instructs dealers and service managers on authorized procedures for identifying and isolating coolant and engine oil leaks. The use of a prescribed leak trace powder is stressed. This bulletin includes service instructions.
SRV-SRB-23-031
Service Bulletin/Repair Instructions
Precautions to Follow During Crankcase Cleaning. Applicability: All Models. This service bulletin informs dealers and service managers about precautions in using abrasive cleaners for engine component sealant, and in particular the crankcase covers. The bulletin further provides cleaning instructions with approved cleaning tools.
SRV-SRB-23-018
Service Bulletin/Repair Instructions
Procedure for Analysis and Control of Oil and Coolant Leaks from Engine. Applicability: All Models. This service bulletin provides dealers and service managers with troubleshooting guidance for oil or coolant leaks. This bulletin includes service instructions.
SRV-TSB-23-001
Service Bulletin/Repair Instructions
CR242 - Rear Brake Hoses Check and Replace if required. Applicability: Multistrada 1200 Model Year 2010-2012 (USA all versions with ABS); Multistrada 1200 Model Year 2013-2014 (USA all versions with ABS). This technical service bulletin dealers and service managers about reports of slight slackening of the rear brake lever, over time as a result of routine use. It also provides a service solution, if the condition is encountered. This document has been redacted for sensitive pricing information.
SRV-SRB-22-038
Service Bulletin/Repair Instructions
Overview of Rear Brake System Updates. Applicability: All Models. This service repair bulletin provides dealers and service managers a provides a summary of the updates available for motorcycles that have Customer concerns about a slight elongation, over time and use, of rear brake pedal stroke.
SRV-TSB-22-010
Service Bulletin/Repair Instructions
CR235 â Checking Proper Configuration of Options Installed on the Motorcycle. Applicability: All Models (USA & MEX country versions only) . This technical service bulletin informs dealers and service managers of required BBS electronic configuration for the subject units. The bulletin also provides affected VIN information and service solution. This document has been redacted for sensitive pricing information.
SRV-SRB-22-031
Service Bulletin/Repair Instructions
Overview of Rear Brake System Updates. Applicability: All US Models. This service bulletin provides a summary of the updates available for motorcycles that have Customer concerns about a slight elongation, over time and use, of rear brake pedal stroke. This Service Bulletin replaces and cancels the bulletin SRV-SRB-22-029 published on 06/17/2022.
TTB-22-001 Rv10
Service Bulletin/Repair Instructions
Tips and Tricks Summary Rev.10. Applicability: Multistrada. This bulletin provides instructions for correct bike battery charging and maintenance procedure.
SRV-SRB-22-020
Service Bulletin/Repair Instructions
Service Operation Manual Update 2022. Applicability: All Models, all model years. This service bulletin informs dealers and service manages of service and operations updates to the Operations Manual.
SRV-ESB-22-002
Service Bulletin/Repair Instructions
Rules for Battery Replacement Under Warranty. Applicability: All models, all years. This Electronic Service Bulletin replaces and cancels SRV-ESB-19-001, published January 17, 2019. It provides dealers and service managers the correct replacement procedures for 12-volt battery installed on all Ducati motorcycle models. This document has been redacted for sensitive pricing information. The annex referenced in this document is available to NHTSA upon request.
TTB-22-001_R 01
Service Bulletin/Repair Instructions
Tips & Tricks V 01 - Applicability: All models. Pg 13 : Possible damage to water pump gear oil seal. Diavel 1260 (all model versions). Pg. 15: Indication for replacement of brake hoses under warranty. Multistrada V4 PP, Pg. 41, Possible presence of error U1900-Optional Configuration not carried out. Multistrada V2, Multistrada V4 PP (all model years) Pg.42; Possible interference between tank bag and front brake fluid reservoir/clutch fluid reservoir. Multistrada V4 (all versions), Pg.43; Possible color change of the Akrapovic silencer carbon endcap.
TTB-20-001 r25
Service Bulletin/Repair Instructions
Tips & Tricks V25 - Applicability: All models. Pg 12 : Update of engine oil filter cartridge tightening torque. Multistrada V4 (all model versions). Pg. 38: Possible incorrect diameter of the silencer front or rear manifold in the Racing Exhaust Kit, Pg. 39, Possible oxidisation of windscreen retaining screws.
TTB-20-001 rev20
Service Bulletin/Repair Instructions
Tips & Tricks. Applicability: All Models, All Model Years, P. 10-Error P0314 Validation: High misfire with risk of damaging the catalytic converter; P.11-Control unit reprogramming. Multistrada V4S All Model Years, P.30-Right-hand switch button backlighting problems, P. 31-Possible appearance of stains and white dots on the instrument panel, P. 31 Possible malfunction of the heated passenger seat. Scrambler 800 MY 2021, P. 43- Possible appearance of errors U0323, P0500, P2158; Scrambler 800 MY 2021-2022, P44-Irregular idling rpm after engine start. Supersport 950, All Model Years, P.50-Engine warning light on: ECU Error P0314
SRV-TTB-20-001 r
Service Bulletin/Repair Instructions
Tips & Tricks Ver 12. Applicability: All models, all model years. This Tips & Tricks bulletin informs dealers and service managers of non-safety time-saving efficiencies and observations, encountered by Ducati field technicians. Topics range from packaging & transport to engines and accessories, to cosmetic issues.
SRV-TTB-21-001v3
Service Bulletin/Repair Instructions
Tips & Tricks Ver 03. Applicability: All models, all model years. This Tips & Tricks bulletin informs dealers and service managers of non-safety time-saving efficiencies and observations, encountered by Ducati field technicians. Topics include aftermarket accessories, battery preparations, tire pressures sensing, gas cap paint, enhanced suspension, oil level checks, and instrument panel software.
SRV-SRB-21-013
Service Bulletin/Repair Instructions
Rideability Complaints. Applicability: All Models. The purpose of this service bulletin is distribute a questionnaire to help dealers and service managers collect detailed information about any rideability complaints for models equipped with a 4-cylinder engine. The purpose is to provide more comprehensive data to enable a better diagnosis of the situation. The referenced questionnaire is attached as an editable PDF, and is available to NHTSA upon request.
SRV-ESB-20-004
Service Bulletin/Repair Instructions
Procedure for the verification of correct operation of fuel level sensor. Applicability: Multistrada 1200 MY 2010-2014 (all versions); Scrambler 800 MY 2019 and later (all versions). This electronic service bulletin replaces and supersedes SRV-ESB-17-001, published on 17/01/2017. This bulletin provides dealers and service managers procedures to check proper operation of fuel level sensors for the applicable models. It also includes part information, component disposal, and warranty instructions. Referenced annex (SRV-ESB-17-001 ENGLISH_Annex.pdf) is available to NHTSA upon request. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 2020 EQUIPMENT CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 S 2019 POWER TRAIN:AUTOMATIC TRANSMISSION CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 2019 POWER TRAIN:AUTOMATIC TRANSMISSION CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 2019 EQUIPMENT ADAPTIVE/MOBILITY CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 2019 EQUIPMENT CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 2020 EQUIPMENT ADAPTIVE/MOBILITY CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 2020 POWER TRAIN:AUTOMATIC TRANSMISSION CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 S 2019 EQUIPMENT CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183582 20201203 SRV-TSB-20-012 20201105 Service Bulletin/Repair Instructions DUCATI PANIGALE V4 S 2019 EQUIPMENT ADAPTIVE/MOBILITY CR200 â Gear sensor replacement and air conveyor kit installation. Applicability: Panigale V4 S/STD MY 2020 (all versions); Panigale V4 R MY 2019-2020 (all versions). This technical service bulletin informs dealers and service managers of a potential gear display failure on the instrument panel, and an associated error. The bulletin further states the likely cause to be overheating of the gear sensor for which new ducting has been implemented to control the condition, and that this is not a safety recall. The bulletin also provides service instructions, parts information, warranty information, and affected VIN data. This document has been redacted for sensitive pricing information. 10183583 20201203 TechTalk7885 20201118 Service Bulletin/Repair Instructions FREIGHTLINER BUSINESS CLASS M2 2017 VISIBILITY Tech Talk discussion on 2017 M2 High beam indicator only working with wipers on. 10183583 20201203 TechTalk7885 20201118 Service Bulletin/Repair Instructions FREIGHTLINER BUSINESS CLASS M2 2017 EXTERIOR LIGHTING:HEADLIGHTS:HIGH/LOW BEAM DIMMER SWITCH Tech Talk discussion on 2017 M2 High beam indicator only working with wipers on. 10183583 20201203 TechTalk7885 20201118 Service Bulletin/Repair Instructions FREIGHTLINER BUSINESS CLASS M2 2017 ENGINE Tech Talk discussion on 2017 M2 High beam indicator only working with wipers on. 10183584 20201203 TechTalk7887 20201116 Service Bulletin/Repair Instructions FREIGHTLINER CASCADIA 2016 POWER TRAIN Tech Talk discussion on dt12 not going to reverse. 10183585 20201203 TechTalk7888 20201117 Service Bulletin/Repair Instructions FREIGHTLINER CASCADIA 2020 ENGINE AND ENGINE COOLING Tech Talk discussion on Low coolant sensor New Cascadia. 10183586 20201203 TechTalk7889 20201128 Service Bulletin/Repair Instructions FREIGHTLINER BUSINESS CLASS M2 2021 ELECTRICAL SYSTEM Tech Talk discussion on 2021 Bulkhead Module Problems. 10183586 20201203 TechTalk7889 20201128 Service Bulletin/Repair Instructions FREIGHTLINER BUSINESS CLASS M2 2021 EQUIPMENT Tech Talk discussion on 2021 Bulkhead Module Problems. 10183587 20201203 PS447 20160525 Service Bulletin/Repair Instructions KIA SOUL 2016 ELECTRICAL SYSTEM PITSTOP: FORWARD COLLISION WARNING (FCW) INDICATOR SHOWN ON CLUSTER WITHOUT DTC(s) - On some 2016MY Soul (PS) vehicles, you may see a Forward Collision Warning (FCW) indicator may appear on the instrument cluster with no DTC's present. This condition may be caused by incorrect/lost variant coding of the Lane Departure Warning System (LDWS) camera, or when replacing with a new camera. 10183587 20201203 PS447 20160525 Service Bulletin/Repair Instructions KIA SOUL 2016 LANE DEPARTURE PITSTOP: FORWARD COLLISION WARNING (FCW) INDICATOR SHOWN ON CLUSTER WITHOUT DTC(s) - On some 2016MY Soul (PS) vehicles, you may see a Forward Collision Warning (FCW) indicator may appear on the instrument cluster with no DTC's present. This condition may be caused by incorrect/lost variant coding of the Lane Departure Warning System (LDWS) camera, or when replacing with a new camera. 10183587 20201203 PS447 20160525 Service Bulletin/Repair Instructions KIA SOUL 2016 FORWARD COLLISION AVOIDANCE PITSTOP: FORWARD COLLISION WARNING (FCW) INDICATOR SHOWN ON CLUSTER WITHOUT DTC(s) - On some 2016MY Soul (PS) vehicles, you may see a Forward Collision Warning (FCW) indicator may appear on the instrument cluster with no DTC's present. This condition may be caused by incorrect/lost variant coding of the Lane Departure Warning System (LDWS) camera, or when replacing with a new camera. 10183588 20201203 TechTalk7894 20201119 Service Bulletin/Repair Instructions FREIGHTLINER CASCADIA 2020 ELECTRICAL SYSTEM Tech talk discussion on ICC 5 loudspeaker faults. 10183588 20201203 TechTalk7894 20201119 Service Bulletin/Repair Instructions FREIGHTLINER CASCADIA 2020 EQUIPMENT Tech talk discussion on ICC 5 loudspeaker faults. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA3 2019 EQUIPMENT Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2018 EQUIPMENT ADAPTIVE/MOBILITY Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA3 2020 EQUIPMENT Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2018 EQUIPMENT Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2018 EQUIPMENT Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2020 EQUIPMENT ADAPTIVE/MOBILITY Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2019 EQUIPMENT ADAPTIVE/MOBILITY Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2019 EQUIPMENT Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2019 EQUIPMENT ADAPTIVE/MOBILITY Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA3 2019 EQUIPMENT ADAPTIVE/MOBILITY Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2020 EQUIPMENT Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2019 EQUIPMENT Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA3 2020 EQUIPMENT ADAPTIVE/MOBILITY Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2018 ENGINE AND ENGINE COOLING Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2018 ENGINE AND ENGINE COOLING Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2019 ENGINE AND ENGINE COOLING Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA3 2020 ENGINE AND ENGINE COOLING Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2020 ENGINE AND ENGINE COOLING Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA3 2019 ENGINE AND ENGINE COOLING Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2020 ENGINE AND ENGINE COOLING Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2019 ENGINE AND ENGINE COOLING Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2020 EQUIPMENT Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA CX-5 2020 EQUIPMENT ADAPTIVE/MOBILITY Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183589 20201203 01-006-20-3695b 20201104 Service Bulletin/Repair Instructions MAZDA MAZDA6 2018 EQUIPMENT ADAPTIVE/MOBILITY Some vehicle may exhibit a tapping noise from the engine during idling; etc., and synchronized to the engine rpm. The tapping noise may be caused by the switchable hydraulic lash adjuster (HLA), which may not work properly due to air bubbles accumulated in the oil passage in it. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-3 2019 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2016 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2020 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2019 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2018 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2017 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2019 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2017 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2019 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2016 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-3 2020 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2020 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2018 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2018 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2017 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-3 2020 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2016 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2017 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2019 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2019 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2020 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2017 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2016 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2016 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2018 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2018 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2018 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-3 2019 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2020 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2019 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2016 EQUIPMENT Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2017 PARKING BRAKE:ELECTRICAL Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2019 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2018 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2016 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-3 2020 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2019 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2016 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2018 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2017 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2016 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-3 2019 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2019 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2017 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-9 2018 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2020 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA CX-5 2020 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183590 20201203 04-007-20-3713a 20201109 Service Bulletin/Repair Instructions MAZDA MAZDA6 2017 SERVICE BRAKES Some vehicles equipped with electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise. 10183591 20201203 PS448 20160525 Service Bulletin/Repair Instructions KIA KIA 9999 POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM) PITSTOP: ELECTRONIC TROUBLESHOOTING MANUAL (ETM) SERVICE TIPS - In an effort to increase the amount of Service Information available to our Kia Service technicians, KGIS offers a section called Service Tips" located in the Electronic Troubleshooting Manual (ETM). These Service Tips provide valuable Service Information for individual systems, circuit description and operation. Additionally, technicians can benefit from all the available Powertrain Control Module (PCM) information which includes detailed circuit description, condition, input and output signal type and level (range) and oscilloscope patterns (for good signal reference).
SRV-SRB-20-014
Service Bulletin/Repair Instructions
Guided diagnosis for front brake system bleeding - Applicability: All vehicle models, all years. This Service Bulletin provides guidance for front brake system bleeding. It includes a "guided diagnosis" attachment, which outlines the sequence of operations to be followed depending on the type of brake master cylinder installed. The attachment is available upon request.
SRV-ESB-20-001
Service Bulletin/Repair Instructions
Ducati Immobilizer Systems - Applicability: All vehicles with electronic coded keys. This Electronic Service Bulletin replaces and cancels the bulletin SRV-ESB-18-004 published on May 3rd, 2018 and provides information regarding the Immobilizer Systems (engine start lock systems) and associated reset procedures that a Ducati technician shall perform in case of a system failure or loss of keys. This bulletin also contains applicability tables and procedures for the various immoblizer systems.
SRV-SRB-19-045
Service Bulletin/Repair Instructions
Scheduled Maintenance Check List Update - Applicability: All models. This service bulletin provides dealers and service managers with scheduled maintenance updates specific to each of Ducati's models. This includes updated mileage and time interval maintenance schedules. The actual checklists referenced in this bulletin will be made available to NHTSA upon request.
SRV-SRB-19-046
Service Bulletin/Repair Instructions
Final Drive Chain Maintenance Precautions - Applicability: All models and Model Years (except XDiavel). The purpose of this service bulletin is to further inform dealers and service managers of proper maintenance to ensure optimal performance and service life of the final drive chain installed on the entire Ducati range of motorcycles.
SRV-SRV-19-035
Service Bulletin/Repair Instructions
TiltWatch indicator for engine shipments - Applicability: all models, all years. This service repair bulletin informs dealers and service managers about the "TiltWatch" indicator being implemented on engine packages. It also provides instruction on how to proceed, should an engine shipment be received with an activated TiltWatch indicator.
SRV-SRB-19-027
Service Bulletin/Repair Instructions
Precautions for the assembly of the front mudguard extension part no.56410801B - Applicability: Multistrada 1200 MY 2010-2018 (all model versions); Multistrada 1260 MY 2018-2019 (all model versions). This service bulletin informs dealers and service managers of reports received by Ducati, identifying incorrect installation of the front mudguard extension during the pre-delivery phase of the listed models (excluding Enduro and Multistrada 950). This bulletin also reiterates installation instructions, part data, and associated illustrations.
SRV-ESB-18-004
Service Bulletin/Repair Instructions
Immobilizer Systems - This electronic service bulletin supersedes SRV-ESB-16-002 published 10/06/2016. it contains updated system information regarding Ducati Immobilizer Systems (engine start lock systems) for the listed year models. The bulletin provides a comprehensive list of procedures covering the associated model systems, associated reference charts.
SRV-ESB-16-003
Service Bulletin/Repair Instructions
FUEL LEVEL SENSOR VERIFICATION PROCEDURE - THIS ELECTRONIC SERVICE BULLETIN CONTAINS UPDATED PROCEDURES FOR DEALER SERVICE DEPARTMENTS TO VERIFY FUNCTIONALITY OF FUEL LEVEL SENSORS PRIOR TO REPLACING THEM AS A RESULT ERRONEOUS DISPLAY ON THE INSTRUMETN PANEL. THIS BULLETIN ALSO CONTAINS ASSOCIATED PART NUMBERS, ILLUSTRATIONS AND MAINTENANCE INSTRUCTIONS.
SRV--ESB-16-002
Service Bulletin/Repair Instructions
IMMOBILIZER SYSTEMS - THIS ELECTRONIC SERVICE BULLETIN INFORMS DUCATI TECHNICIANS REGARDING DUCATI IMMOBILIZER SYSTEMS (ENGINE START LOCK SYSTEMS) FOR ALL DUCATI MODELS FROM MODEL YEAR 2006 TO MODEL YEAR 2016. THIS BULLETIN ALSO CONTAINS ALL RELEVANT RESET PROCEDURES THAT CAN BE PERFORMED IN CASES OF SYSTEM FAILURE, OR KEY LOSS.
SRV-SRB-16-017
Service Bulletin/Repair Instructions
TRANSPARENT MAINTENANCEPOSTER AND SCHEDULED MAINTENANCE CHECKLIST UPDATE - THIS SERVICE BULLETIN CONTAINS DUCATI SERVICE MINIMUM REQUIREMENTS. IT INCLUDES MAINTENANCE CHECKLISTS AND INTERVALS, AS WELL AS ILLUSTRATIONS FOR DISPLAY.
RCL-15-001
Service Bulletin/Repair Instructions
DUCATI MULTISTRADA 1200 M.Y. 10-11-12-13-14: RECALL BULLETIN INVOLVING THE MULTISTRADA 1200 THROTTLE CABLE, THE TUBING INSIDE THE SHEATH OF THE THROTTLE COULD DISENGAGE AND BECOME STUCK INSIDE THE CONTROL HOUSING. *LJ
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.