CXA_10_17_CARB Truck Chec
Other
CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
Vehicle report
2018 FCCC MT45
Service bulletins
40 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
MYCOM_05142024-1
Other
My Communications for SSI DEF Header Warranty Policy Extension for B6 7 Engines Model Years 2017-2021
FL974
Service Bulletin/Repair Instructions
Revised Emissions Recall: Cummins DEF Sensor Shortage. REVISION: Some vehicles formerly in Group F have been moved to Group G and have been assigned a new part number as specified in Table 1. An SRT for 'Calibration Code Only: Update or Confirm' has been added, as shown in Table 2, to be used when a new DEF header is not required. There have been some other minor changes to the work instructions and SRT times.
ICI24-006
Service Bulletin/Repair Instructions
Important Campaign Information letter for FL974 - Revised Bulletin & Population
WP21-007
Service Bulletin/Repair Instructions
Warranty Policy Letter for battery tags. DTNA determined that since adopting the AutoMeter BCT-460DTNA Powernet Assessment Tool (AutoMeter) as the required powernet system tester, not all battery tags have to be retained support Warranty-related claims.
21OEM-06
Service Bulletin/Repair Instructions
Starting on November 23, 2020, DiagnosticLink 8.13 (Build 4527) was made available. Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
SS3733
Service Bulletin/Repair Instructions
Updated Service Solution for 6.0l Gas Engine With Low Oil PSI. Certain FCCC vehicles equipped with a 6.0l GM gas engine may experience a complaint of low oil pressure indication on the instrument panel.
SBU35-012
Service Bulletin/Repair Instructions
FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
SBU54-056
Service Bulletin/Repair Instructions
Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeterÃÂî is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
20CSA-10
Service Bulletin/Repair Instructions
Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLinkÃÂÃÂÃÂÃÂÃÂÃÂÃÂî 8.12 Standard and Professional is available to download from the Detroit Diesel server.
20OEM-05
Service Bulletin/Repair Instructions
OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
20TS-05
Service Bulletin/Repair Instructions
Technical Service Letter for EPA10, GHG14, GHG17 Diesel Particulate Filter (DPF) Compatibility. Note: This document supersedes 14 TS-25 and 15 TS-8. Detroit Diesel has determined that some, Diesel Particulate Filters (DPFs) are compatible in pairs and or can be mixed together within EPA10 and GHG14 Systems. For 1-BOX and Two-Box Configuration Aftertreatment Systems (ATS), this is only possible when the filters are used in accordance with Tables 1 and 2 shown below. All other DPFs, NOT mentioned below, are NOT compatible.
20CSA-09
Service Bulletin/Repair Instructions
Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020.
SF606REV
Service Bulletin/Repair Instructions
Revision for Field Service Campaign for 8.0L Engine Calibration Updates. On certain vehicles, an erroneous fault code setting and malfunction indicator light (MIL) illumination may occur. The engine controller software will be updated. The revision has updated work instructions and a new contact phone number for Agility with business hours provided.
ICI20-021
Service Bulletin/Repair Instructions
Important Campaign Information for SF606 Revised Bulletin. This letter is to inform you that a revised bulletin for Field Service Campaign SF606 Agility 8.0L Engine Calibration Updates is available on DTNAConnect. The work instructions have been updated and a new contact phone number for Agility with business hours has been provided.
20CSA-08
Service Bulletin/Repair Instructions
Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.
SF606
Service Bulletin/Repair Instructions
Field Service Campaign for 8.0L Engine Calibration Updates. On certain vehicles, an erroneous fault code setting and malfunction indicator light (MIL) illumination may occur. The engine controller software will be updated.
WI20-008
Service Bulletin/Repair Instructions
Warranty Information Letter for Warranty Training Online. DTNA is pleased to announce the release of new Warranty-related training videos. The videos provide Warranty content in short instructional videos that are available on demand through the AftermarkeTV Video Channel icon on the Aftermarket Resource Center (ARC) home page.
WP20-006
Service Bulletin/Repair Instructions
Warranty Policy Letter for Handling for Authorized Service Location Part Transfers. To promote 24-hour throughput and maximum efficiency, DTNA is adjusting multiple handling policies: Launching a new handling allowance for parts ordered from another Authorized Service Location because the facing Part Distribution Center (PDC) is out of stock Retiring Detroit's Customer First Program
WP20-007
Service Bulletin/Repair Instructions
Warranty Policy Letter for Chassis Progressive Damage Policy Change. Effective for repair orders opened on or after April 27, 2020, if an Authorized Service Location installed a part which later has a warrantable failure, progressive damage and labor may be covered under the Aftermarket Parts Limited Parts Warranty (Parts Warranty).
WP20-005
Service Bulletin/Repair Instructions
Warranty Policy Letter for Handling Change: Over the Counter Aftermarket Parts Replacement Program. DTNA is pleased to announce that handling will increase to 33% for Misc. Replacement Part type claims filed under the Over the Counter (OTC) Aftermarket Parts Replacement Program.
WI20-004
Service Bulletin/Repair Instructions
Warranty Information Letter for Warranty Long Block Program Change. The Detroit Reman Long Block Program has expanded. The expansion reduces complexity in ordering reman engines and promotes stocking reman engines to meet uptime commitments.
SIB0201-20
Service Bulletin/Repair Instructions
Service Information Bulletin for Cylinder Block Porosity Repair for DD5 and DD8 egnines. Use this procedure to repair oil leaks caused by cylinder block porosity. The low oil pressure, cast areas of the cylinder block can be repaired using this method. J-B Weld is the recommended two-part epoxy for this repair.
20CSA-04
Service Bulletin/Repair Instructions
Customer Service Announcement saying that Service Pack (SP) 3 for DiagnosticLinkî 8.11 Standard and Professional will be available for download from the Detroit Diesel server.
03.2020 Campaign
Service Bulletin/Repair Instructions
Open recall and Field service Campaigns report send out to Dealers, General Managers, Service managers and warranty managers.
WP20-002
Service Bulletin/Repair Instructions
Warranty Policy Letter explaining the Warranty Department is aligning with the frame rail repair policy, published in DTNA Workshop Manuals, which states that there are very few cases in which welding a heat-treated frame rail is allowed. Therefore, before welding anything on a frame rail, contact the applicable regional service representative for approval.
SBU54-048
Service Bulletin/Repair Instructions
Service Bulletin for Guidelines for Repairing or Replacing an Electrical Harness. Use the guidelines in this bulletin to determine if a damaged electrical harness should be repaired or replaced.
19CSA-13
Service Bulletin/Repair Instructions
Service Systems Development provided document to service locations on price list reflects current charges to engine horsepower ratings for HDEP and MDEG engine platforms.
19-012WP
Service Bulletin/Repair Instructions
Warranty Policy Letter to communicate remarketing handling cap for Detroit DT12 Transmission.
19-013WI
Service Bulletin/Repair Instructions
Warranty Information Letter to announce addition of Thomas Built Bus as a brand with an Authorized Demonstrator Program
19-010WI
Service Bulletin/Repair Instructions
Warranty Information Letter updated to communicate warranty system updates.
19-008WI
Service Bulletin/Repair Instructions
Warranty Information Letter sent to customers regarding new refrigerator supplier for returning parts.
19-009WI
Service Bulletin/Repair Instructions
Warranty Information Letter - Expanded guidelines for paint-related claims sent out to Freightliner, Western star, Thomas Built Bus, Export and Direct warranty customers
DOC-1034452
Service Bulletin/Repair Instructions
Training Solution created by DTNA to provide guidance to customers when searching for service information for components and systems not owned by Daimler Trucks North America (DTNA).
SF581
Service Bulletin/Repair Instructions
FCCC MT Chassis Front Brake Hoses Recall Bulletin
Brake Clevis
Service Bulletin/Repair Instructions
Customer Advisory Letter- Brake Clevis CA wletter
sbu54056
Service Bulletin/Repair Instructions
sbu54056 Powernet Troubleshooting Guide Batteries, Path, Alternator, and Starter
DOC-1034023
Service Bulletin/Repair Instructions
Service Solution-SS 1034023 FCCC MTG Park Brake Routing
MT Park Brake Ca
Service Bulletin/Repair Instructions
MT Park Brake Cable Rub letter
ICI18-038 FL795
Service Bulletin/Repair Instructions
ICI18-038 FL795 ? Interim Recall Notice
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.