SS 584261-FCCC
Other
Service Solution for MT45G & MT55G Power Steering Oil Cooler Replacement Parts (306)
Vehicle report
2020 FCCC MT45
Service bulletins
42 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SS 580739 FCCC
Other
Service Solution for Step Van Cat Theft Deterrent Systems
FL997-Bulletin
Emissions
Revised Emission Recall for FCCC Clean Idle Label
FL997-DLR LTR
Emissions
Revised Emission Recall for FCCC Clean Idle Label
PB33-004-FTL
Service Bulletin/Repair Instructions
Parts Bulletin for Tie Rod Assembly Part Breakdown
SS580739-FCCC
Other
Service Solution for Step Van Cat Theft Deterrent Systems (291)
ICI25-002
Other
Important Campaign Information letter for FL997 Emissions Recall - Revised Bulletin/Population
CXA_10_17_CARB Truck Chec
Other
CX Advocate for CARB tightening the Readiness Criteria applied to On-Board Diagnostic (OBD) test submissions for the Clean Truck Check.
ICI24-035
Other
Important Campaign Information for FL997 Emissions Recall Campaign Suspended
FL997-OWN LTR
Emissions
Emission Recall for FCCC Clean Idle Label
MYCOM_05142024-1
Other
My Communications for SSI DEF Header Warranty Policy Extension for B6 7 Engines Model Years 2017-2021
FL974
Service Bulletin/Repair Instructions
Revised Emissions Recall: Cummins DEF Sensor Shortage. REVISION: Some vehicles formerly in Group F have been moved to Group G and have been assigned a new part number as specified in Table 1. An SRT for 'Calibration Code Only: Update or Confirm' has been added, as shown in Table 2, to be used when a new DEF header is not required. There have been some other minor changes to the work instructions and SRT times.
ICI24-006
Service Bulletin/Repair Instructions
Important Campaign Information letter for FL974 - Revised Bulletin & Population
WP21-007
Service Bulletin/Repair Instructions
Warranty Policy Letter for battery tags. DTNA determined that since adopting the AutoMeter BCT-460DTNA Powernet Assessment Tool (AutoMeter) as the required powernet system tester, not all battery tags have to be retained support Warranty-related claims.
21OEM-06
Service Bulletin/Repair Instructions
Starting on November 23, 2020, DiagnosticLink 8.13 (Build 4527) was made available. Current subscribers of DiagnosticLink 8.11 or 8.12 may upgrade to DiagnosticLink 8.13 at no cost. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
SS3733
Service Bulletin/Repair Instructions
Updated Service Solution for 6.0l Gas Engine With Low Oil PSI. Certain FCCC vehicles equipped with a 6.0l GM gas engine may experience a complaint of low oil pressure indication on the instrument panel.
SBU35-012
Service Bulletin/Repair Instructions
FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
SBU31-006
Service Bulletin/Repair Instructions
Service Bulletin for Interlube Leak at the Injectors. Some walk-in vans equipped with an Interlube Chassis Lubrication System may experience leaks at the lubrication injectors. The injectors may not have been tightened properly.
SBU54-056
Service Bulletin/Repair Instructions
Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeterÃÂî is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
TechTalk7597
Service Bulletin/Repair Instructions
Tech Talk discussion on GM engine fault codes on 6.0L engine.
20CSA-10
Service Bulletin/Repair Instructions
Customer Service Announcement informing that Service Pack (SP) 1 for DiagnosticLinkÃÂÃÂÃÂÃÂÃÂÃÂÃÂî 8.12 Standard and Professional is available to download from the Detroit Diesel server.
20OEM-05
Service Bulletin/Repair Instructions
OEM and distributor announcement for DiagnosticLink 8.12 (Build 4527) was made available. All DTNA Service shops & OEM locations are required to maintain the latest version of software on each of their stations.
20TS-05
Service Bulletin/Repair Instructions
Technical Service Letter for EPA10, GHG14, GHG17 Diesel Particulate Filter (DPF) Compatibility. Note: This document supersedes 14 TS-25 and 15 TS-8. Detroit Diesel has determined that some, Diesel Particulate Filters (DPFs) are compatible in pairs and or can be mixed together within EPA10 and GHG14 Systems. For 1-BOX and Two-Box Configuration Aftertreatment Systems (ATS), this is only possible when the filters are used in accordance with Tables 1 and 2 shown below. All other DPFs, NOT mentioned below, are NOT compatible.
ICI20-023
Service Bulletin/Repair Instructions
Important Campaign Information Letter announcing that a revised bulletin for Field Service Campaign SF603 FCCC MT45 Fuel Tank Mounting Hardware is available on DTNAConnect. The hex bolt part number and description has been updated to 23-13833-110 NUT-HEX,PT,5/8-13,C,ZN/AL,.448.
SF603REV
Service Bulletin/Repair Instructions
Revised Field Service Campaign for FCCC MT45 Fuel Tank Mounting Hardware. On certain vehicles with a left hand fuel tank mounting, the fuel tank mounting bracket bolts may not have been torqued to the correct specification at the plant. The bolts will be replaced and torqued to the correct specification. The revision is the hex bolt part number and description has been updated to 23-13833-110 NUT-HEX,PT, 5/8-13,C,ZN/AL,.448
20CSA-09
Service Bulletin/Repair Instructions
Customer Service Announcement for DiagnosticLink Software Update Reminder. Due to various software changes and fixes, vehicles will require DiagnosticLink 8.12 to perform functional programming. Failure to use this version may cause errors, incomplete programming, and poor vehicle performance. Because of this, all DiagnosticLink 8.09 installed versions will be disabled as of Thursday, July 23, 2020.
20OEM-04
Service Bulletin/Repair Instructions
OEM and distributor announcement for Running Change to ACM Software for MY2020. There is an upcoming running change (RC1) for ACM software that will be installed when OEMs or distributors program with DiagnosticLink. The hardware part number for the ACM module will remain the same (A 000 446 97 54). OEMs are instructed to continue ordering the same ACM hardware part number.
20CSA-08
Service Bulletin/Repair Instructions
Customer Service Announcement for Release of DiagnosticLink 8.12. On Wednesday, June 10, 2020, DiagnosticLink 8.12 will be made available for download from the ordering system. Current subscribers of DiagnosticLink 8.xx can upgrade to DiagnosticLink 8.12 at no cost. All DTNA service shops are required to maintain the latest version of software on each of their stations.
WI20-008
Service Bulletin/Repair Instructions
Warranty Information Letter for Warranty Training Online. DTNA is pleased to announce the release of new Warranty-related training videos. The videos provide Warranty content in short instructional videos that are available on demand through the AftermarkeTV Video Channel icon on the Aftermarket Resource Center (ARC) home page.
WP20-006
Service Bulletin/Repair Instructions
Warranty Policy Letter for Handling for Authorized Service Location Part Transfers. To promote 24-hour throughput and maximum efficiency, DTNA is adjusting multiple handling policies: Launching a new handling allowance for parts ordered from another Authorized Service Location because the facing Part Distribution Center (PDC) is out of stock Retiring Detroit's Customer First Program
WP20-007
Service Bulletin/Repair Instructions
Warranty Policy Letter for Chassis Progressive Damage Policy Change. Effective for repair orders opened on or after April 27, 2020, if an Authorized Service Location installed a part which later has a warrantable failure, progressive damage and labor may be covered under the Aftermarket Parts Limited Parts Warranty (Parts Warranty).
WP20-005
Service Bulletin/Repair Instructions
Warranty Policy Letter for Handling Change: Over the Counter Aftermarket Parts Replacement Program. DTNA is pleased to announce that handling will increase to 33% for Misc. Replacement Part type claims filed under the Over the Counter (OTC) Aftermarket Parts Replacement Program.
SF603
Service Bulletin/Repair Instructions
Field Service Campaign for FCCC MT45 Fuel Tank Mounting Hardware. On certain vehicles with a left hand fuel tank mounting, the fuel tank mounting bracket bolts may not have been torqued to the correct specification at the plant. The bolts will be replaced and torqued to the correct specification.
WI20-004
Service Bulletin/Repair Instructions
Warranty Information Letter for Warranty Long Block Program Change. The Detroit Reman Long Block Program has expanded. The expansion reduces complexity in ordering reman engines and promotes stocking reman engines to meet uptime commitments.
20CSA-04
Service Bulletin/Repair Instructions
Customer Service Announcement saying that Service Pack (SP) 3 for DiagnosticLinkî 8.11 Standard and Professional will be available for download from the Detroit Diesel server.
03.2020 Campaign
Service Bulletin/Repair Instructions
Open recall and Field service Campaigns report send out to Dealers, General Managers, Service managers and warranty managers.
WP20-002
Service Bulletin/Repair Instructions
Warranty Policy Letter explaining the Warranty Department is aligning with the frame rail repair policy, published in DTNA Workshop Manuals, which states that there are very few cases in which welding a heat-treated frame rail is allowed. Therefore, before welding anything on a frame rail, contact the applicable regional service representative for approval.
20CSA-03
Service Bulletin/Repair Instructions
Customer Service Announcement saying that Service Pack (SP) 2 for Diagnostic Link 8.11 Standard and Professional will be available for download from the Detroit Diesel server.
SBU54-048
Service Bulletin/Repair Instructions
Service Bulletin for Guidelines for Repairing or Replacing an Electrical Harness. Use the guidelines in this bulletin to determine if a damaged electrical harness should be repaired or replaced.
WP20-001REV
Service Bulletin/Repair Instructions
Revision to a Warranty Policy Letter announcing the One Stop Supplier Extended Program Launch. The One Stop Supplier Extended Program streamlines the claim filing process because with One Stop Supplier Extended, the service network will file claims for some supplier-supported coverages in OWL. Revisions are in blue.
20CSA-02
Service Bulletin/Repair Instructions
Customer Service Announcement reminding service locations to update their DiagnosticLink software. To maintain access to the Detroit server, all DiagnosticLink computers must be updated with the current version of DiagnosticLink software. all DiagnosticLink 8.08 installed versions will be disabled as of Tuesday, January 28, 2020.
WP20-001
Service Bulletin/Repair Instructions
Warranty Policy Letter announcing the One Stop Supplier Extended Program Launch. The One Stop Supplier Extended Program streamlines the claim filing process because with One Stop Supplier Extended, the service network will file claims for some supplier-supported extended coverages in OWL.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.