SS3733
Service Bulletin/Repair Instructions
Updated Service Solution for 6.0l Gas Engine With Low Oil PSI. Certain FCCC vehicles equipped with a 6.0l GM gas engine may experience a complaint of low oil pressure indication on the instrument panel.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SS3733
Updated Service Solution for 6.0l Gas Engine With Low Oil PSI. Certain FCCC vehicles equipped with a 6.0l GM gas engine may experience a complaint of low oil pressure indication on the instrument panel.
SBU35-012
FCCC Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
DOR-K2T5D-01
This SKU is a DEF Injector. The customer communication requested return of unsold inventory to inspect the sealing. The injector sealing may have an issue which will cause a slow leak. A slow leak of the DEF Injector can lead to crystal formation which can cause aftertreatment related fault codes and ECU driven engine derating.
SBU54-056
Freightliner Custom Chassis Service Bulletin for When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeter is the only Daimler-approved tool for troubleshooting vehicle Powernet issues. When troubleshooting powernet issues, use the BCT-460DTNA PowerNet Assessment Tool. As of May 29, 2018, the AutoMeterÃÂî is the only Daimler-approved tool for troubleshooting vehicle Powernet issues.
SF606REV
Revision for Field Service Campaign for 8.0L Engine Calibration Updates. On certain vehicles, an erroneous fault code setting and malfunction indicator light (MIL) illumination may occur. The engine controller software will be updated. The revision has updated work instructions and a new contact phone number for Agility with business hours provided.
ICI20-021
Important Campaign Information for SF606 Revised Bulletin. This letter is to inform you that a revised bulletin for Field Service Campaign SF606 Agility 8.0L Engine Calibration Updates is available on DTNAConnect. The work instructions have been updated and a new contact phone number for Agility with business hours has been provided.
SF606
Field Service Campaign for 8.0L Engine Calibration Updates. On certain vehicles, an erroneous fault code setting and malfunction indicator light (MIL) illumination may occur. The engine controller software will be updated.
WI20-008
Warranty Information Letter for Warranty Training Online. DTNA is pleased to announce the release of new Warranty-related training videos. The videos provide Warranty content in short instructional videos that are available on demand through the AftermarkeTV Video Channel icon on the Aftermarket Resource Center (ARC) home page.
WP20-006
Warranty Policy Letter for Handling for Authorized Service Location Part Transfers. To promote 24-hour throughput and maximum efficiency, DTNA is adjusting multiple handling policies: Launching a new handling allowance for parts ordered from another Authorized Service Location because the facing Part Distribution Center (PDC) is out of stock Retiring Detroit's Customer First Program
WP20-007
Warranty Policy Letter for Chassis Progressive Damage Policy Change. Effective for repair orders opened on or after April 27, 2020, if an Authorized Service Location installed a part which later has a warrantable failure, progressive damage and labor may be covered under the Aftermarket Parts Limited Parts Warranty (Parts Warranty).
WP20-005
Warranty Policy Letter for Handling Change: Over the Counter Aftermarket Parts Replacement Program. DTNA is pleased to announce that handling will increase to 33% for Misc. Replacement Part type claims filed under the Over the Counter (OTC) Aftermarket Parts Replacement Program.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.