Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
TSB 26-2256
Service Bulletin/Repair Instructions
This article supersedes TSB 25-2572 to update the Parts List to correct the part number LC3Z-6006-L to LC3Z-6781-A, remove the flex plate bolts AL3Z-6379-BA from the parts list as these bolts are in kit LC3Z-6781-A, update the claim quantity of the part number W709771-S440 to 9 pieces (F-650/F750-Engine Replacement), W706447-S437 and W715068-S437 to 4 pieces, W712861-S439 to 8 pieces(F-Super Duty Pickup And Chassis Cab-Engine Replacement) / 8 pieces (F-53 Motorhome/F-59 Stripped Chassis Cab/F-650,F750 Engine Replacement) / W714286-S442 to 4 pieces (F-Super Duty Pickup And Chassis Cab-Camshaft and Tappet Repair / F-Super Duty Pickup And Chassis Cab-Engine Replacement), include LC3Z-6020-A for the Engine replacement lists, include 1 fuel injector seal kit to the Camshaft and Tappet repair lists, include 4 pieces of W520114-S440 to the E Series-Camshaft and Tappet Repair list, and update the engine oil part numbers XO-5W30-Q1SP and CXO-5W30-LSP6. Some of the vehicles listed in the Model statement above may exhibit an upper engine ticking or tapping noise at idle. Customers may also report experiencing ro
25N17
Other
Advance Notice – Customer Satisfaction Program 25N17 Certain 2015-2025 Model Year Multiple Vehicle Lines Rear View Camera Replacement If Required After Dealer Evaluation
SSM 54678
Service Bulletin/Repair Instructions
Some 2021-2026 F-150 vehicles equipped with a 5.0L/5.2L engine, 2021-2025 F-Super Duty/F-53 Motorhome/F59 Commercial Stripped Chassis vehicles equipped with a 6.8L/7.3L engine and 2021-2025 E-Series/F-650/F-750 vehicles equipped with a 7.3L engine may exhibit a rattle/scraping noise upon startup that may remain after the engine is running. Workshop Manual (WSM),
SSM 54601
Service Bulletin/Repair Instructions
Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
TSB 25-2572
Service Bulletin/Repair Instructions
This article supersedes TSB 25-2322 to update the Service Procedure, Labor Operations and Parts List. Some of the vehicles listed in the Model statement above may exhibit an upper engine ticking or tapping noise at idle. Customers may also report experiencing rough engine performance, engine misfire, or a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0301-P0308 in the powertrain control module (PCM). This may be due to camshaft and/or valve tappet having excess wear within the engine assembly.
25H05
Other
This is a proactive investigation program by Ford Motor Company to inspect a limited number of affected vehicles that are customer-owned. Ford is voluntarily conducting this program to evaluate the software currently installed on one or more electronic modules in the affected vehicles.
SSM 54363
Service Bulletin/Repair Instructions
Some 2021-2025 Expedition/Navigator/F-150/F-Super Duty/F-53 Motorhome/F59 Commercial Stripped Chassis/F-650/F-750/Transit vehicles equipped with a 2.7L/3.5L (non hybrid)/6.8L/7.3L engine and 2021-2026 E-Series may exhibit a rattle/scraping noise from the bellhousing area on start-up. Workshop Manual (WSM), Section 303-00 Engine System - General Information > Diagnosis and Testing and 303-06 > Starting System has been updated to address this condition. Additionally, WSM, Section 303-01 > Removal and Installation > Engine to Transmission Spacer Plate has been added to address this condition. Refer to the revised WSM sections for normal diagnosis.
SSM 54338
Service Bulletin/Repair Instructions
Some 2021-2025 F-150 vehicles equipped with a 5.0L/5.2L engine, 2021-2025 F-Super Duty/F-53 Motorhome/F59 Commercial Stripped Chassis vehicles equipped with a 6.8L/7.3L engine and 2021-2026 E-Series/F-650/F-750 vehicles equipped with a 7.3L engine may exhibit a rattle/scraping noise upon startup that may remain after the engine is running. This may be due to the starter motor drive gear not retracting after starting. To correct this condition, inspect the starter motor drive gear and shaft. If the starter motor drive gear slides back and forth by hand and/or shows signs of scoring or damage, replace the starter motor following Workshop Manual (WSM), Section 303-06 Starting System > Removal and Installation > Starter.
TSB 25-2382
Service Bulletin/Repair Instructions
Some of the vehicles listed in the Model statement above may exhibit an incorrectly illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0420 and/or P0430 stored in the powertrain control module (PCM). This may be due to the software in the PCM.
TSB 25-2322
Service Bulletin/Repair Instructions
This article supersedes TSB 25-2200 to update the parts list to add the new camshaft and tappet service kit and add F-650/F-750. Some of the vehicles listed in the Model statement above may exhibit an upper engine ticking or tapping noise at idle. Customers may also report experiencing rough engine performance, engine misfire, or a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0301-P0308 in the powertrain control module (PCM). This may be due to camshaft and/or valve tappet having excess wear within the engine assembly.
SSM 53973
Service Bulletin/Repair Instructions
Some 2021-2024 Edge/Nautilus, 2021-2025 Bronco/Bronco Sport/E-Series/Escape/Corsair/Expedition/Navigator/Explorer/Aviator/F-150/F-Super Duty/Mustang/Ranger, and 2022-2025 Maverick vehicles may require an A/C compressor clutch assembly replacement be performed for various concerns. Workshop Manual (WSM), Section 412-00 Removal and Installation has been updated to eliminate the need to remove and install the A/C compressor to change out the A/C Compressor clutch assembly.
TSB 25-2200
Service Bulletin/Repair Instructions
Some of the vehicles listed in the Model statement above may exhibit an upper engine ticking or tapping noise at idle. Customers may also report experiencing rough engine performance, engine misfire, or a malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0301-P0308 in the powertrain control module (PCM). This may be due to camshaft and/or valve tappet having excess wear within the engine assembly.
SSM 53764
Service Bulletin/Repair Instructions
Some 2020 Continental, 2020-2024 Edge/Nautilus, 2020-2025 Explorer/Aviator/Escape/Corsair/F-150/F-Super Duty/Ranger/Transit/E-Series, 2021-2025 Bronco, and 2022-2025 Maverick vehicles may require an engine cooling system flush to be performed for various concerns. Workshop Manual (WSM), Section 303-03 has been updated to eliminate the need to remove and install the radiator assembly to perform a radiator flush.
SSM 53040
Service Bulletin/Repair Instructions
While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
24B27 S3
Service Bulletin/Repair Instructions
In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Reason for supplement: software now available/additonal technician information
24B27 S2
Service Bulletin/Repair Instructions
Certain 2020-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or 7.3L Gasoline Engine Powertrain Control Module (PCM) Software Update REASON FOR THIS SUPPLEMENT • Software Availability Update: Software is now available to repair 2021-2022 and 2025 Model Year Econoline vehicles. The service action has been updated accordingly. • Technical Information: IDS programing information has been added for 2021-2023 Model Year Econoline Vehicles.
24N03
Service Bulletin/Repair Instructions
Certain 2021-2022 Model Year Econoline Vehicles Equipped with Dual Rear Wheels Hydroboost or Hydromax® Power Steering Pressure and Jumper Line Replacement Affected vehicles were inspected and passed inspection for inadequate connection of the Hydroboost power steering pressure and jumper lines in safety recall 22S08, before January 29, 2023. This program provides coverage to the Hydroboost power steering pressure and jumper lines should they require replacement due to inadequate connection to the brake Hydroboost unit.
24B27 S1
Service Bulletin/Repair Instructions
Certain 2020-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or 7.3L Gasoline Engine Powertrain Control Module (PCM) Software Update In affected vehicles, the Variable Displacement Oil Pump (VDOP) delivers oil to the engine at low pressure/capacity during idle conditions. Routine occurrences of prolonged idle time may result in excess wear to the engine camshaft lobes and valve tappet surfaces due to reduced lubrication. Over time, the engine may progressively run rough due to cylinder misfire. Additionally, customers may hear engine tapping noises and the Check Engine Light (CEL) may illuminate
24B27
Service Bulletin/Repair Instructions
Certain 2023-2024 Super Duty and 2021-2025 Model Year Econoline Equipped With a 6.8L or 7.3L Gasoline Engine - Powertrain Control Module Software Update
SSM 52476
Service Bulletin/Repair Instructions
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
22N15
Service Bulletin/Repair Instructions
Customer Satisfaction Program 22N15 Certain 2020-2023 Model Year Bronco Sport, Escape, Corsair, E-Series, F-650/F-750, F-53 Motorhome Chassis, F-59 Commercial Stripped Chassis Vehicles Equipped with Smart Data Link Connector (SDLC) Gateway Module Reprogramming for Inspection and Maintenance (I/M) Testing Adding Not OTA Capable Owner letters. Other documents submitted 01/02/24 & Received OTA letters submitted on 02/01/24
SSM 52314
Service Bulletin/Repair Instructions
During service and repair requiring removal and replacement of a crankshaft bolt and/or crankshaft damper, achieving proper torque of the crankshaft pulley bolt is critical. Incorrect torque may allow the bolt to loosen resulting in the timing gear breaking and engine damage. Replacement of the bolt is critical to the repair and accurately following the installation procedure in the Workshop Manual (WSM) Section, 303-01 is extremely important. The bolt torque procedure can be found in the crankshaft front seal removal and installation procedure or in the engine assembly procedure.
TSB 23-2288
Service Bulletin/Repair Instructions
This article supersedes TSB 23-2258 to update the Parts List, TSB Issue, and Service Procedure. Some 2021-2023 E-Series vehicles may exhibit a lack of air flow due to an inoperative heating, ventilation, and air conditioning (HVAC) blower motor. This may be due to a damaged fuse F2 (50A) in the battery junction box (BJB). To correct the condition, replace the BJB, pigtail connector, and replace fuse F2 in the new BJB with the listed service replacement part.
22L03
Service Bulletin/Repair Instructions
Certain 2021-2022 Model Year Econoline, Super Duty Chassis Cab, F53 Motor Home, F59 Step Van, and F650/F750 Medium Duty Chassis Cab Vehicles Equipped with a Premium Rated 7.3L Engine - Engine Horsepower Credit
TSB 23-2258
Service Bulletin/Repair Instructions
Some 2021-2023 E-Series vehicles may exhibit a lack of air flow due to an inoperative heating, ventilation, and air conditioning (HVAC) blower motor. This may be due to a damaged fuse F2 (50A) in the battery junction box (BJB). To correct the condition, replace the BJB and replace fuse F2 in the new BJB with the listed service replacement part.
SSM 51719
Service Bulletin/Repair Instructions
Some 2021-2023 F-Super Duty/E-Series vehicles equipped with a 6.2L, 6.8L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 and/or P0455 stored in the powertrain control module (PCM). This may be due to a improper fuel filler cap installation and/or outside contamination on the fuel cap sealing surface. The fuel filler cap requires multiple turns to seal properly and should be clean of any debris on sealing surface. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. If the DTCs return after the fuel filler cap is cleared of debris and properly seated, refer to Workshop Manual (WSM), Section 303-13 > pinpoint test HX.
SAN-Vol1 I1
Service Bulletin/Repair Instructions
The Service Awareness Newsletter is an informal communication that contains information that may not be presently available in a TSB, SSM, GSB, or other electronic communication. This article includes information on warranty, technical service tips and other service information.
SSM 51254
Service Bulletin/Repair Instructions
Some 2020-2022 Escape/Corsair/F-53 Motorhome/F-59 Commercial Stripped Chassis, 2021-2023 F-650/F-750/E-Series, and 2021-2022 Bronco Sport vehicles may exhibit an intermittent no crank/no start condition and/or an intermittent blank instrument panel cluster (IPC)/SYNC touchscreen. This may be due to the software in the gateway module (GWM). To correct the condition, reprogram the GWM using the latest software level of the appropriate Ford diagnostic scan tool. For claiming use causal part 14F642 and the applicable labor operations of Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 51210
Service Bulletin/Repair Instructions
Some 2020-2022 F53 Motorhome built on or before 06-Oct-2022 and 2021-2022 E-Series vehicles built on or before 09-Mar-2021 may exhibit a Service AdvanceTrac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperative. To correct the condition, reprogram the ABS module using the latest software level of the Integrated Diagnostic System (IDS). For claiming, use causal part number 2C219 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 51111
Service Bulletin/Repair Instructions
Some 2020-2022 F53 Motorhome built on or before 06-Oct-2022 and 2021-2022 E-Series vehicles built on or before 09-Mar-2021 may exhibit a Service AdvanceTrac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperative. To correct the condition, reprogram the ABS module using the latest software level of the Integrated Diagnostic System (IDS). For claiming, use causal part number 2C219 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 50974
Service Bulletin/Repair Instructions
Some 2020-2022 Escape/Corsair/F-53 Motorhome/F-59 Commercial Stripped Chassis, 2021-2023 F-650/F-750/E-Series, and 2021-2022 Bronco Sport vehicles may exhibit a communication fault with emissions inspection equipment. This may be due to the software in the gateway module (GWM). To correct this condition, reprogram the GWM to latest software level using the appropriate Ford diagnostic scan tool. Use causal part 14F642 and applicable labor times from Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 50977
Service Bulletin/Repair Instructions
Some 2021-2022 F-Super Duty and 2021-2023 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design has changed, requiring multiple turns to seal properly. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. For further diagnostics, refer to Workshop Manual (WSM), Section 303-13 - pinpoint test HX.
SSM 50804
Service Bulletin/Repair Instructions
Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive calls for data through the vehicle network keeping it in an activated state. Recommend that the customer uninstall the app to ensure this is not contributing to battery symptoms experienced. Advise the customer that unaffiliated third-party app developers do not work directly with Ford to adhere to security, vehicle communication, and privacy requirements.
SSM 50733
Service Bulletin/Repair Instructions
Some 2021 and 2022 Ford and Lincoln vehicles may experience a tire sidewall wavy/indentation appearance in the radial direction on one or both sidewalls. Sidewall wavy/indentation appearance is a common cosmetic characteristic of radial tire construction and will not affect the performance of the tire.
SSM 49785
Service Bulletin/Repair Instructions
Some 2021 F-Super Duty and 2021-2022 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design has changed, requiring multiple turns to seal properly. Advise the customer to turn the fuel filler cap clockwise until there is at least one audible click to seal properly. For further diagnostics, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual, pinpoint test HX.
SSM 49778
Service Bulletin/Repair Instructions
Some 2021 F-Super Duty/F-650/F-750 and 2021-2022 E-Series vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design changed for 2021 to require three full turns to properly tighten. Advise the customer of the design change. For further diagnostics, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual, pinpoint test HX.
SSM 49692
Service Bulletin/Repair Instructions
Some 2021-2022 E-Series vehicles built on or before 09-Mar-2021 may exhibit a Service Advance Trac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperable. To correct the condition, reprogram the ABS module using the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part number 2C215 and applicable labor times in Section 10 of the Service Labor Time Standards (SLTS) Manual.
SSM 49485
Service Bulletin/Repair Instructions
Some 2021 E-Series/F-Super Duty/F-650/F-750 vehicles equipped with a 6.2L or 7.3L gasoline engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0457 stored in the powertrain control module (PCM). This may be due to a loose fuel filler cap. The fuel filler cap design changed for 2021 to require one full turn to properly tighten. Advise the customer of the design change. For further diagnostics, refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual, pinpoint test HX.
SSM 49349
Service Bulletin/Repair Instructions
Some 2021 E-Series chassis vehicles may exhibit a Service Advance Trac and Pre-Collision Assist Not Available message in the cluster with diagnostic trouble code (DTC) C0051 stored in the anti-lock brake system (ABS) module. Cruise control may also be inoperable. If this concern is still present after normal diagnosis, clear the DTC with the appropriate Ford diagnostic scan tool and schedule a follow-up appointment for service in March 2021. Inform the customer that engineering is working to implement a solution for this condition and advise the customer that they can continue to drive the vehicle. This condition does not create drivability concerns and has no effect on long-term durability. Once the solution becomes available, contact the customer and confirm a service appointment. Monitor OASIS for updates.
SSM 49147
Service Bulletin/Repair Instructions
Some 2021 E-Series/F-650/F-750 vehicles may exhibit inoperative RKE key fobs resulting in key fob replacement or some customers may seek service to program additional key fobs to the vehicle. A new IDS procedure has been released with IDS version 119.01 to allow for RKE key fob programming. Start a vehicle session and click on the Toolbox Tab. Click on Body > Security > Remote Keyless Entry to begin programming new and/or additional key fobs. Only 4 RKE key fobs total can be programmed to each vehicle. All vehicles are equipped with a wired in connectivity device. If the customer elects to program this connectivity device it will take up 1 of the 4 available slots. The Workshop Manual procedure for RKE programming is also being updated.
SSM 48976
Service Bulletin/Repair Instructions
Some 2021 E-Series/F-650/F-750 vehicles may exhibit inoperative RKE key fobs or some customers may seek service to program additional key fobs to the vehicle. Inform customers that Ford is developing an IDS procedure that is expected late August 2020, which will restore RKE function and allow for programming additional RKE key fobs. The Workshop Manual procedure for RKE programming is also being updated. Because these vehicles have a new generation body control module (BCM), replacement of the BCM is no longer the recommended repair procedure. Advise the customer they can continue to drive the vehicle and schedule a follow-up appointment for service in late August. Once the update becomes available, contact the customer and confirm the service appointment is going forward. Monitor OASIS for updates.
SSM 48915
Service Bulletin/Repair Instructions
2020 Transit, F-Super Duty, F-53 Motorhome/F-59 Commercial, 2021 F-650/F-750/E-series incomplete, chassis Cab, cutaway and stripped chassis vehicles equipped with a lane keeping or departure system are not calibrated from the factory to support final modifications. The final stage manufacturer is responsible for verifying that the lane keeping or departure system camera sensor is properly calibrated within Ford specifications once vehicles are completed. Calibrating the lane keeping or departure system utilizes the Ford FDRS scan tool to calibrate the front view camera. Refer to Workshop Manual (WSM) section 419-01. Do not submit a claim for this condition.
20B15
Service Bulletin/Repair Instructions
In some of the affected vehicles , a piston oil cooler bracket may have been damaged during engine assembly. A damaged piston oil cooler bracket may allow the piston oil cooler to detach. This can lead to low engine oil pressure and may result in intermittent engine noises and/or illumination of the check engine light due to diagnostic trouble code(s).