Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SSM 54937
Service Bulletin/Repair Instructions
Some 2025-2026 Police Interceptor Utility hybrid vehicles may have previously set a "Procedure Unsuccessful" message in the Ford Diagnosis and Repair System (FDRS) scan tool during the passive anti-theft system (PATS) parameter reset. This may have occurred after replacing the body control module (BCM), powertrain control module (PCM), electric brake booster (EBB) and/or secondary on-board diagnostic module C (SOBDMC). To correct this condition, download the latest version of the "PCM - Passive Anti-Theft System (PATS) Programming" application using the latest software version of the FDRS scan tool either by clicking the blue "Download" button in FDRS to the right of the application name, or by clicking the green refresh button (2 arrows in a circle) to the right of the application name, then run the application again and follow the prompts to perform "Module Initialization (Parameter Reset)".
SSM 54787
Service Bulletin/Repair Instructions
Some 2020-2023 Aviator and 2025-2026 Explorer/Police Interceptor Utility hybrid vehicles may exhibit a "Refuel Error See Manual" message in the instrument panel cluster (IPC) after installing a replacement fuel filler door assembly (7827936). This may be due to a concern with the replacement fuel filler door assembly. This condition does not affect vehicle durability and no additional diagnosis or service is required for this condition at this time. Inform customers that they can continue to drive the vehicle and Ford is currently working on a solution for this condition that is expected Q3 2026. Further replacement of the fuel filler door assembly will not resolve this condition at this time. Monitor Professional Technician System (PTS) for additional information and schedule service appointments for customers once the repair becomes available.<br /><br /> If a customer vehicle exhibits this concern, submit a Vehicle Concern Report. To submit a report, click on the "Submit Global Concern Report (GCR)" link at the upper right of the PTS Vehicle ID screen (vehicle identification number ÝVIN¨ required) a
SSM 54783
Service Bulletin/Repair Instructions
Some 2021-2023 F-150 vehicles equipped with a 3.5L PowerBoost engine and 2020-2026 Explorer vehicles equipped with a 3.3L hybrid engine may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble code (DTC) P0A1E stored in the powertrain control module (PCM). The vehicle may be unable to enter electric-only drive modes as expected during normal drive cycles. This may be due to the software within the belt integrated starter generator (BISG). For vehicles with this condition, follow Pinpoint Test G located in the Workshop Manual (WSM), Section 303-06D and repair the vehicle as necessary. Note that the BISG is on backorder status at the time of this publication and Ford is working to make parts available. Engineering is investigating this concern. Monitor PTS for updates.