Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SSM 54601
Service Bulletin/Repair Instructions
Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
SSM 52476
Service Bulletin/Repair Instructions
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
SSM 51909
Service Bulletin/Repair Instructions
When performing any transmission fluid changes or topoffs involving MERCON SP, MERCON LV has replaced all versions of MERCON SP and can be used going forward. Mixing MERCON LV and MERCON SP in the same transmission is acceptable. After 30-Jun-2023, MERCON SP ATF will no longer be manufactured and will only be available until inventory depletes.
SSM 49495
Service Bulletin/Repair Instructions
Some 2005-2021 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
SSM 48494
Service Bulletin/Repair Instructions
Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
SSM 48157
Service Bulletin/Repair Instructions
Some 2002-2008 F-Super Duty, F-150 and Mark LT vehicles may exhibit concern during or after programing the VSM. The programming may fail or vehicle symptoms such as inoperative door locks, dome lamps, door ajar indicators or auto lamps may occur after successful programing. To ensure the VSM is configured correctly, use the Integrated Diagnostic System (IDS) scan tool and select the blue ball and socket icon in the upper left corner. Select the utility knife in the bottom left corner. Select Update/Special Function and enter 53061 in the blue box then press the tick mark. The screen will go back to the system utilities page. Navigate to the toolbox tab and run the Programmable Module Installation (PMI) on the VSM. The procedure will prompt you to manually enter the as-built into the VSM. Obtain the as-built data from PTS > OASIS > As-Built.
SSM 47979
Service Bulletin/Repair Instructions
Some 2005-2019 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
SSM 47009
Service Bulletin/Repair Instructions
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
SSM 46345
Service Bulletin/Repair Instructions
SOME 2005-2017 F-SUPER DUTY 4X4 VEHICLES OPERATED IN EXTREME DUST, MUD OR TAR SAND CONDITIONS MAY EXHIBIT ACCELERATED 4X4 VACUUM HUB SEAL AND OR WHEEL BEARING WEAR AS A RESULT OF HARSH OPERATING CONDITIONS. A KNUCKLE SEAL SHIELD KIT IS NOW AVAILABLE FOR CUSTOMER PURCHASE. THE KIT IS DESIGNED FOR SEVERE DUTY AND IS NON WARRANTABLE. THE KNUCKLE SEAL SHIELD KIT GC3Z-54024A38-A INCLUDES AN INSTRUCTION SHEET.
TSB150164
Service Bulletin/Repair Instructions
Exterior Mirror - Tubular stainless steel west cpast style mirror - Loose mounting bracket
ASI-45219
Service Bulletin/Repair Instructions
FORD: DIESEL ENGINE RUNS ROUGH, ENGINE KNOCKING, HARD START, CRANK BUT NO START DUE TO HEIGHT OF IMPROPER PEDESTAL THAT CAUSES EXHAUST OR INTAKE VALVES BE HUNG OPEN. MODEL 2008-10 F SUPER DUTY. *PE
ASI-49219
Service Bulletin/Repair Instructions
FORD: AFTER ROCKER PEDESTAL REPLACEMENT, SOME DIESEL TRUCKS ARE EXPERIENCING KNOCKING ENGINE, ROUGH RUNS, HARD START, CRANK NO START BECAUSE OF IMPROPER PEDESTAL HEIGHT CAUSING TO HANG OPEN THE INTAKE OR EXHAUST VALVES. MODEL 2008-10 F SUPER DUTY. *PE
ASI-44716
Service Bulletin/Repair Instructions
FORD: DUE TO RESTRICTIONS FROM COOLING SYSTEM CONTAMINATION, DIESEL ENGINE OIL COOLERS PRIMARILY ARE BEING REPLACED BECAUSE OF OTHER COMPONENTS IN COOLING SYSTEM. MODEL 2008-10 F-SUPER DUTY. *PE
ASI-44664
Service Bulletin/Repair Instructions
FORD: THERE ARE EXHAUST LEAKS, CAUSED BY WARPED EXHAUST MANIFOLD, EXPERIENCE BY DIESEL ENGINE. MODEL 2008-10 F SUPER DUTY. *PE
ASI-44534
Service Bulletin/Repair Instructions
FORD: WHEN SHIFTING BETWEEN PARK, REVERSE AND/OR DURING 2-3 SHIFT, AN INTERMITTENT CLUNK OCCURS WITH A TORQSHIFT TRANSMISSION. MODEL 2003-2014 F-SUPER DUTY, E SERIES, EXCURSION, F-53 MOTORHOME CHASSIS, LOW CAB FORWARD. *PE
TSB-13-6-7
Service Bulletin/Repair Instructions
FORD: WHEN TURNING, THERE IS A POPPING OR CLUNKING NOISE THAT IS HEARD OR FELT, UNDER FLOOR PAN, IN SOME VEHICLES AND MORE NOTICEABLE WHEN WEATHER IS COLD. MODEL 2008-2012 F-SUPER DUTY. *PE
TSB-12-6-8
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS, EQUIPPED WITH 6.4L DIESEL ENGINE WILL LACK POWER WITH DIAGNOSTIC TROUBLE CODES (DTCS) P246C AND P2463 WITH A MALFUNCTION INDICATOR LAMP. *PE
ASI-22277
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS MAY EXHIBIT A SITUATION WITH DIESEL ENGINE SUCH AS ENGINE KNOCKING, LOW POWER, EXHAUST SMOKE, LONG OR NO CRANK START AND RUNS ROUGH. *PE
TSB-11-4-22
Service Bulletin/Repair Instructions
FORD: SOME FORD SUPER DUTY TRUCKS MAY EXHIBIT A LACK OF POWER WITH A DIAGNOSTIC TROUBLE CODE DURING ACCELERATION. *RM
TSB-11-4-15
Service Bulletin/Repair Instructions
FORD: SOME FORD SUPER DUTY TRUCKS MAY EXHIBIT A LACK OF POWER WITH A DIAGNOSTIC TROUBLE CODE AT FULL OPERATING TEMPERATURE DURING ACCELERATION. *RM
CSP-11B23
Service Bulletin/Repair Instructions
FORD SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THERE ARE MULTIPLE PROBLEMS WITH THE VEHICLE. POSSIBLIY INCLUDING: MALFUNCTION LIGHT ON, RUNS ROUGH, REDUCED POWER, EXCESSIVE SMOKE FROM THE EXHAUST, FUEL SMELL FROM THE CRANKCASE, COOLANT LOSS, AND ENGINE NOISE. *RM
AS-21769
Service Bulletin/Repair Instructions
FORD: IF THERE IS AN INTERMITTENT LACK OF POWER, SURGE, OR HESITATION WHILE DRIVING THE BRAKES WILL OVERRIDE ACCELERATION. *RM
TSB-10-23-6
Service Bulletin/Repair Instructions
FORD: THE MALFUNCTION LIGHT MAY BE ON WITH A LACK OF POWER. HTERE MAY BE MULITPLE TROUBLE CODES STORED. 2008 F-250/350/450/550. *RM
SB-21410
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS WITH 6.4L ENGINE WILL RUN ROUGH, SMOKES, OR NO START DUE TO GASOLINE OR ALCOHOL IN THE FUEL. GASOLINE/ALCOHOL LACK THE LUBRICITY OF DIESEL FUEL AND WILL CAUSE FUEL SYSTEM FAILURE. *PE
SB-21434
Service Bulletin/Repair Instructions
FORD: SUPPLY/RETURN LINES INSTALLATION AT HIGH PRESSURE PUMP-REVISED WASHER FOR TRUCKS EQUIPPED WITH 6.4L ENGINES. WHEN INSTALLING SUPPLY OR RETURN LINES AT HIGH PRESSURE PUMP ON DIESEL ENGINES, DO NOT USE THE BONDED STYLE WASHER (W302870), USE ONLY THE HYBRID STYLE WASHER (W303659). *PE
TSB-09-16-7
Service Bulletin/Repair Instructions
FORD SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER.SOME VEHICLES EQUIPPED WITH A 6.4L DIESEL ENGINE MAY REQUIRE A CALIBRATION UPDATE WHICH WILL COVER SEVERAL DIFFERENT CONCERNS. *PE
TSB-09-16-10
Service Bulletin/Repair Instructions
FORD: SOME VEHICLES EQUIPPED WITH A 6.4L DIESEL ENGINE AND BUILT BETWEEN 8/3/07 AND 1/2/08 MAY REQUIRE A CALIBRATION UPDATE WHICH WILL COVER SEVERAL DIFFERENT CONCERNS. *PE
TSB-09-16-9
Service Bulletin/Repair Instructions
FORD: SOME VEHICLES EQUIPPED WITH A 6.4L DIESEL ENGINES AND BUILT PRIOR TO 8/2/07 MAY REQUIRE A CALIBRATION UPDATE WHICH WILL COVER SEVERAL DIFFERENT CONCERNS. *PE
CSP-08B06
Service Bulletin/Repair Instructions
FORD SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. CERTAIN 2008 MODEL YEAR F SUPER DUTY VEHICLES EQUIPPED WITH A 6.4L DIESEL ENGINE COOLING SYSTEM VENTURI TEE INSTALLATION. *PE UPDATED 5/5/09. CSC LETTER WAS RECEIVED. *PE UPDATED 12/30/09. CSC LETTER WAS REC'D. 8PE
CSP-09B08
Service Bulletin/Repair Instructions
FORD SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. VEHICLES FUEL INJECTOR O RINGS CAN PREMATURELY WEAR. AS A RESULT, FUEL MAY LEAK INTO CRANKCASE CAUSING OIL LEVEL TO RISE. HIGH OIL LEVELS CAN CAUSE DRIVABILITY CONCERNS AND ULTIMATELY LEAD TO ENGINE DAMAGE. CSC LETTER WAS RECEIVED. *PE UPDATED 12/08/09. CSC LETTER WAS REC'D. *PE
TSB-08-10-2
Service Bulletin/Repair Instructions
FORD: 6.4L DIESEL ENGINE. VEHICLES BUILT BETWEEN 1/3/08 AND 5/5/08 DIAGNOSTIC TROUBLE CODES (DTCS) P0128, P0196, P1335, P0404 AND P0406. *PE
TSB-08-18-6
Service Bulletin/Repair Instructions
FORD TRUCK: SOME TRUCKS EQUIPPED WITH A 6.0L DIESEL ENGINE MAY EXHIBIT A HARD START/LONG CRANK OR NO START CONDITION DUE TO LOW INJECTION CONTROL PRESSURE (ICP). *PE
SSI-08-T-01
Service Bulletin/Repair Instructions
FORD SUPER DUTY: DEMONSTRATION/DELIVERY HOLD S008 F SUPER DUTY VEHICLES; 6/4L DIESEL ENGINE COOLING SYSTEM VENTURI TEE INSTALLATION UPGRADE. AFFECTED VEHICLES, THE RADIATOR MAY DEVELOP CRACKS FROM A REVERSE FLOW OF COO AIR/COOLANT FROM THE DEGAS BOTTLE TO THE RADIATOR. *PE
20232
Service Bulletin/Repair Instructions
2005-08 F250-550 SUPER DUTY MANUAL TRANSMISSION - CLUTCH PEDAL CONCERN. *NJ
08-4-8
Service Bulletin/Repair Instructions
6.4L AIR INDUCTION SYSTEM RESTRICTION--SNOW--BUILT BEFORE 9/18/2007. *NJ
08-5-3
Service Bulletin/Repair Instructions
AXLE WHINE NOISE BETWEEN 50-60 MPH (80-97 KM/H) WIDE FRAME WITH PICKUP BOX--DANA S110. *NJ
20170
Service Bulletin/Repair Instructions
2008 F-SUPER DUTY 6.4L - P040D DTC WITH A LACK OF POWER OR LACK OF BOOST. *NJ
SB-20720
Service Bulletin/Repair Instructions
FORD SD TRUCKS; THIS NON MIL DTC WILL BE STORED IN THE POWERTRAIN CONTROL MODULE (PCM) WHEN THE ENGINE OIL TEMPERATURE (EOT), ENGINE COOLANT TEMPERATURE (ECT) AND INTAKE AIR TEMPERATURE (IAT) ARE BELOW -15F (-26C) AT START UP AND ENGINE BLOCK HEATER IS NOT UTILIZED. *PE
20124
Service Bulletin/Repair Instructions
2008 E-SERIES AND F-SERIES SUPER DUTY - STEERING GEAR LEAK. *NJ
20127
Service Bulletin/Repair Instructions
2008 F-SERIES SUPER DUTY DIESELS EXHIBITING DTC P0528 DUE TO SNOW PLOW INSTALLATION ON VEHICLES WITHOUT FACTORY INSTALLED SNOW PLOW PACKAGE. *NJ
20129
Service Bulletin/Repair Instructions
2008 F-SUPER DUTY 6.4L DIESEL - MIL, P006B, P2563, P2263 WITH OR WITHOUT A DRIVABILITY COMPLAINT. *NJ
20131
Service Bulletin/Repair Instructions
2008 F-SUPER DUTY 6.4L DIESEL - VREF CODES P1335, P0193, P0642, P0643, OR P0652. *NJ
07166
Service Bulletin/Repair Instructions
THE 2008 F-SUPER DUTY VEHICLE IS EQUIPPED W/ A SMART JUNCTION BOX (SJB) OR GENERIC ELECTRONIC MODULE (GEM) AND ITS FUNCTION IS TO PROVIDE PROTECTION AGAINST EXCESSIVE CURRENT LOADS, TYPICAL OF A SHORT CIRCUIT, BY SHUTTING DOWN CIRCUIT OPERATION. THE SJB/GEM STRATEGY MAY INTERPRET THE SWITCHING BETWEEN FORD HEADLAMPS AND EMERGENCY VEHICLE LIGHTING, AND VICE-VERSA AS A SHORT-TO-GROUND, CAUSING THE POWER FEEDING A HEADLAMP CIRCUIT THROUGH THE SJB TO BE TURNED OFF. *NJ
07312
Service Bulletin/Repair Instructions
WATER IN THE FUEL TANK BEHIND REAR AXLE - 6.0L, 6.4L AND 7.3L DIESEL ENGINE. *KB UPDATED 2/29/08. *NJ
07231
Service Bulletin/Repair Instructions
HPL SERIES WRECKER APPLICATIONS. JERR-DAN *KB UPDATED 12/12/07. *NJ
20052
Service Bulletin/Repair Instructions
1999-2008 F250-F550 SUPER DUTY 4X4 WITH ELECTRONIC SHIFT TRANSFER CASE NOT ENGAGING 4X4. *NJ
06221
Service Bulletin/Repair Instructions
HELIX ANGLE AND TOOTH PRESSURE ANGLE COUNT AND LOOK THE SAME. INSTALLING A Z92 GEAR ON THIS TRANSMISSION WILL RESULT IN PREMATURE FAILURE. *KB UPDATED 12/12/07. *NJ
07192
Service Bulletin/Repair Instructions
SOME 2008 F-SUPER DUTY VEHICLES BUILT BEFORE 5/10/07 AND EQUIPPED WITH A 5.4L OR 6.8L ENGINE AND SINGLE REAR WHEELS (SRW), WITH A CUSTOMER CONCERN OF POWER STEERING PUMP NOISE WHILE DRIVING AND WITH HOTTER THAN NORMAL POWERING STEERING FLUID, REPLACE THE POWER STEERING PRESSURE LINE. *NJ
19967
Service Bulletin/Repair Instructions
2008 F-SUPER DUTY - 6.4L AIR INDUCTION SNOW RESTRICTION. *NJ
19989
Service Bulletin/Repair Instructions
2005-2008 F-SUPER DUTY MANUAL TRANSMISSION- CLUTCH PEDAL CONCERN. *NJ
20020
Service Bulletin/Repair Instructions
SOME 2008 F-SUPER DUTY - 6.4L DIESEL EGR VALVE AND DPF FAILURES DUE TO HIGH SULFUR DIESEL FUEL. *NJ
SI-20024
Service Bulletin/Repair Instructions
FORD: DUAL REAR WHEEL (DRW) SIDE MARKER LAMPS LOOSE. SOME VEHICLES (F350-550 SD) EQUIPPED WITH DRW MAY EXHIBIT SIDE MARKER LAMPS THAT ARE LOOSE/FALLING OFF. IF A SIDE MARKER LAMP MUST BE REPLACED F81Z-15442-BA (RED) AND F81Z-15442-CA (AMBER), DISPOSE OF THE BULB THAT COMES WITH THE SERVICE LAMP AND REPLACE W/ THE BULB WITH PART NUMBER C2AZ-13466-C. *PE
07238
Service Bulletin/Repair Instructions
DIESEL EXHAUST MODIFICATION ON 2008 FORD SUPER DUTY F-SERIES FOR MPL SERIES WRECKERS. *NJ
004
Service Bulletin/Repair Instructions
BLIZZARD SNOWPLOWS - ON 2008 FORD SUPER DUTY TRUCKS (SNOWPLOW HEADLAMP SWITCH OPERATION W/SNOWPLOW HEADLAMPS CONNECTED (6-PIN HEADLAMP KIT). *NJ
19918
Service Bulletin/Repair Instructions
(WIRING FAULT ON TRAILER) DISPLAYED IN MESSAGE CENTER WITH DTC C2806 - MY 2008 F-SUPER DUTY. *NJ
003
Service Bulletin/Repair Instructions
ISOLATION MODULE - INSTALLATION LOCATION FOR ALL 2008 FORD SUPER DUTY TRUCKS. BLIZZARD SNOWPLOWS. *NJ
789
Service Bulletin/Repair Instructions
INSTALLATION LOCATION FOR ALL 2008 FORD SUPER DUTY TRUCKS (ISOLATION MODULE). WESTERN PRODUCTS. *NJ
19891
Service Bulletin/Repair Instructions
SOME 2008 F-SUPER DUTY - WIRING FAULT ON TRAILER DISPLAYED IN MESSAGE CENTER WITH DTC C2806. *NJ
0707
Service Bulletin/Repair Instructions
IN SOME OF THE AFFECTED VEHICLES, THREE FUEL INJECTORS WERE SUBJECTED TO A REVERSE POLARITY VOLTAGE DURING ENGINE TESTING THAT MAY HAVE DAMAGED THE INJECTOR RESULTING IN REDUCED FUEL FLOW. THIS MAY POTENTIALLY CAUSE THE VEHICLE TO RUN ROUGH, HESITATE, OR STUMBLE ON ACCELERATION. *NJ
19786
Service Bulletin/Repair Instructions
DISTANCE TO EMPTY (DTE) AND FUEL GAUGE SERVICE TIP. *NJ
19807
Service Bulletin/Repair Instructions
AIR INDUCTION SNOW RESTRICTION. VEHICLE OPERATED IN HEAVY SNOW CONDITIONS MAY EXPERIENCE A LACK OF POWER DURING ACCELERATION. THIS COULD CAUSE THE CHECK AIR FILTER MESSAGE ON DASH. *NJ
19813
Service Bulletin/Repair Instructions
INJECTOR CIRCUIT OPEN- DTC(S) P0201-P0208 WITH A MISFIRE/ROUGH RUNNING/LACK OF POWER CONDITION. *NJ
19815
Service Bulletin/Repair Instructions
2008 F-SUPER DUTY - 6.4L DIESEL ENGINE - THE FUEL COOLING PUMP NOISE. *NJ
19817
Service Bulletin/Repair Instructions
2008 F-SUPER DUTY - SOFT OR INCREASED BRAKE PEDAL TRAVEL - PERFORM BOTH MASTER CYLINDER BYPASS TEST AND PINPOINT TEST F. *NJ
19849
Service Bulletin/Repair Instructions
UVC 15-WAY CONNECTIONS THAT ARE SECURED BY AN O-RING. *NJ
19850
Service Bulletin/Repair Instructions
DANA S110 REAR - AXLE FLUID LEAK. *NJ
19852
Service Bulletin/Repair Instructions
WIRING FAULT ON TRAILER DISPLAYED IN MESSAGE CENTER WITH DTC C2806. *NJ
07230
Service Bulletin/Repair Instructions
MPL SERIES WRECKER APPLICATION. JERR-DAN. *KB
07227
Service Bulletin/Repair Instructions
STANDARD DUTY CARRIER APPLICATIONS. *KB
07228
Service Bulletin/Repair Instructions
AFTER MARKET FUEL TANKS. *KB
07229
Service Bulletin/Repair Instructions
RAPID FLASHING TURN LIGHTS. *KB
19768
Service Bulletin/Repair Instructions
STOP/TURN LAMP SEPARATION. *KB
19703
Service Bulletin/Repair Instructions
POWER FOLDING MIRROR. *KB
19704
Service Bulletin/Repair Instructions
WIRING FAULT ON TRAILER, DISPLAYED IN MESSAGE CENTER WITH DTC C2806. *KB
19715
Service Bulletin/Repair Instructions
INSTRUMENT PANEL LIGHTS DIM - SPDJB MUST LEARN RESISTANCE VALUES OF DIMMER. *KB
19728
Service Bulletin/Repair Instructions
LACK OF POWER DUE TO LOW FUEL PRESSURE - FUEL TANK LINER SEPERATION. *KB
19730
Service Bulletin/Repair Instructions
WIRING FAULT ON TRAILER DISPLAYED IN MESSAGE CENTER WITH DTC C2806. *KB
19612
Service Bulletin/Repair Instructions
MALFUNCTION INDICATOR LAMP ON WITH CODE P132B. *KB
19614
Service Bulletin/Repair Instructions
AIR FILTER WATER INGESTION / SNOW PACKING WITH CODES P0103. *KB
19620
Service Bulletin/Repair Instructions
INJECTOR CIRCUIT OPEN CODES P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208 WITH A MISFIRE / ROUGH RUNNING / LACK OF POWER CONDITION. *KB
19621
Service Bulletin/Repair Instructions
LACK OF POWER DUE TO LOW FUEL PRESSURE, FUEL TANK LINER SEPERATION. *KB
19622
Service Bulletin/Repair Instructions
IDS UNABLE TO COMMUNICATE WITH THE PCM. *KB
071110
Service Bulletin/Repair Instructions
BRAKE BOOSTER SYSTEM MAY EXHIBIT A BRAKE PEDAL KICKBACK AND/OR GRABBING CONDITION WHEN APPLYING THE BRAKES. *NJ
0772
Service Bulletin/Repair Instructions
REAR OF VEHICLE IS TOO HIGH/LOW -5TH WHEEL AND GOOSE NECK APPLICATIONS. *KB
0777
Service Bulletin/Repair Instructions
EXHAUST SMOKE FROM FRONT OF VEHICLE. EXHAUST ODOR INSIDE THE VEHICLE. *KB
0791
Service Bulletin/Repair Instructions
LIGHTING ON SNOW PLOW EQUIPPED VEHICLES. *KB
07910
Service Bulletin/Repair Instructions
6.4L-PCM UPDATE- BUILT BEFORE 7/-30/2007- INTERMITTEN P0342 AND/OR P1326, UPDATE-PTO FUNCTION, TURBO PROCTECTION, HIGH IDLE, SHIFT QUALITY AND IC. *KB UPDATED 11/05/07. *NJ