Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SSM 54601
Service Bulletin/Repair Instructions
Ford and Lincoln vehicles equipped with wired keyless entry keypad systems and accessory wireless keyless entry keypad systems may or may not come with a wallet card containing the master code. Unlike the integrated wired keypad, the accessory wireless keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool or from the label printed on the body control module (BCM). The Factory Keyless Entry Code application within the diagnostic scan tool will not provide an applicable master code for the accessory wireless keypad. If the wallet card for an accessory keypad is not available, the "Wireless RF Keypad Diagnosis Guide" can be referenced and provides direction on how to retrieve the master code. This guide is located under the Workshop Manual tab > Accessories > Installation > Wireless RF Keypad Diagnosis Guide > PPT C > Step C2.<br /><br /> Note: The only available keypad for some vehicles from the assembly plant is the accessory wireless keyless entry keypad. The integrated wired keypad cannot be installed on vehicles not equipped from the factory with a wired keyless entry k
24L05
Other
Certain 2011-2022 Model Year Super Duty Vehicles Equipped with 6.7L Engine - Emission Control Information Label Update for Qualified Vehicles
SSM 52476
Service Bulletin/Repair Instructions
All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
22N14 S1
Service Bulletin/Repair Instructions
Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine State Inspection and Maintenance Test Failure Due to DTCs P2073 and/or P2074 Adding owner letter and corrected dealer bulletin. First Part submitted 11/01/23
23B63
Service Bulletin/Repair Instructions
Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with 6.7L Diesel Engine State Inspection and Maintenance Testing Failure Due to DTCs P2073 and/or P2074
SSM 51691
Service Bulletin/Repair Instructions
2011-2023 F-Super Duty and 2016-2024 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
SSM 51536
Service Bulletin/Repair Instructions
For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
SSM 51251
Service Bulletin/Repair Instructions
Some 2011-2022 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 ðF (65 ðC) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
22N14
Service Bulletin/Repair Instructions
Certain 2011-2012 Model Year F-Series Super Duty Vehicles Equipped with a 6.7L Diesel Engine Powertrain Control Module Reprograming for Inspection and Maintenance Testing
21M04
Service Bulletin/Repair Instructions
Certain 2011-2014 Model Year Super Duty Vehicles Equipped with a 6.7L Diesel Engine Exhaust Gas Recirculation Cooler with Diagnostic Trouble Codes P0401 and/or P2457 - In some of the affected vehicles, customers may experience an illuminated malfunction indicator light due to the EGR cooler becoming plugged with hydrocarbon or soot at high mileage. Diagnostic trouble codes (DTCâÂÂs) for EGR cooler efficiency below threshold (DTC P0401) and/or insufficient EGR flow at idle (DTC P2457) are stored when the malfunction indicator light is illuminated.
SSM 50636
Service Bulletin/Repair Instructions
2011-2022 F-Super Duty and 2016-2023 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit an elevated idle condition. During prolonged idle time, vehicles may experience this elevated idle to reduce unburned hydrocarbons from the SCR. The powertrain control module estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 RPM for ambient temperatures near 26°C (80°F) and may increase to 1200 RPM at -40 °C (-40°F). Vehicles may exhibit exhaust smoke and diesel exhaust fluid smell during elevated idle condition. Exhaust smoke and smell condition will not affect reliability or durability of the engine. Power take-off (PTO) use and idle set point control will disable elevated speed. It is required that the operator monitor the vehicle and adhere to any Exhaust Filter warning messages.
TSB 22-2115
Service Bulletin/Repair Instructions
Some 2011-2012 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P2073 and/or P2074 stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.
SSM 50330
Service Bulletin/Repair Instructions
Some 20112014 F-Super Duty vehicles equipped with 6.7L diesel engine may experience an exhaust leak due to broken exhaust manifold studs. New parts have been released to service this condition. Replace the exhaust manifold on the side with a broken stud. On cylinders 1,2,3,5,6 and 7 use stud part number W715713-S431. If replacing the studs on cylinders 4 and/or 8 use stud part number W717172-S900 and replace both studs and install new spacers and heat shields on the affected side(s). Refer to Workshop Manual, Section 303-01. Part numbers: heat shield left side, FC3Z-9Y427-A and DC3Z-9A462-B for the right side. Spacer part number FC3Z-00810-A. Exhaust manifold part numbers: DC3Z-9430-A (right) and DC3Z-9431-A (left). Exhaust Manifold Gasket FC3Z-9448-A. Exhaust Manifold Nut W701706-S430.
SSM 49805
Service Bulletin/Repair Instructions
Some 2011-2021 vehicles equipped with a diesel engine may have engine oil in the exhaust after turbocharger replacement for various reasons. To correct the condition, remove the exhaust and stand the exhaust up with the turbocharger inlet side facing down using a suitable drain pan. Allow the exhaust to drain for at least 24 hours and reinstall. Do not perform a manual exhaust regeneration.
SSM 49495
Service Bulletin/Repair Instructions
Some 2005-2021 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
SSM 49430
Service Bulletin/Repair Instructions
2011-2021 F-Super Duty and 2016-2021 F-650/F-750 vehicles equipped with a 6.7L engine may exhibit a high/elevated idle condition. During prolonged idle time, vehicles may experience this high/elevated idle to reduce buildup of unburned hydrocarbons from the SCR system. The powertrain control module (PCM) estimates hydrocarbon levels in the SCR and may increase idle speed to remove them. Idle speed will be increased to 1000 revolutions per minute (rpms) for ambient temperatures near 26C (80F) and may increase to as high as 1200 rpms at -40 C (-40F). These elevated idle periods can last from 20-40 minutes, depending on ambient temperatures. During power take off (PTO) use and already using idle set point control, the elevated speed is disabled. It is required that the operator monitor the vehicle and adhere to the Exhaust Filter warning messages.
SSM 49065
Service Bulletin/Repair Instructions
Some 2011-2020 F-Super Duty, 2015-2019 Transit, 2016-2021 F-650/F-750 and 2018-2020 F-150 vehicles equipped with a 6.7L, 3.2L or 3.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P207F, P20EE, P229F, P2201 and/or P24AE. This may be a result of using aftermarket cleaning liquids or tools for the exhaust gas recirculation (EGR) cooler or intake. Ford does not recommend the cleaning of diesel intakes or EGR coolers using any aftermarket tool that injects a cleaning foam or liquid substance into the EGR cooler or intake. Using these types of fluids can result in sodium poisoning of the NOx and particulate matter (PM) sensors resulting in degraded operation and permanent damage to the after treatment system. Use of these cleaning tools may void the emissions warranty of the hot end after treatment exhaust system and the attached emissions sensors.
SSM 48494
Service Bulletin/Repair Instructions
Some 2005-2020 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
SSM 48139
Service Bulletin/Repair Instructions
Some remanufactured 6.7L diesel engines recently installed in 2011-2014 F-Super Duty vehicles may exhibit a lack of power with engine oil temperature (EOT) exceeding 125Ã
âC (257Ã
âF) under loads. This may also be accompanied by REDUCED ENGINE POWER being displayed in the message center and the coolant temperature gauge indicating H. This symptom may be due to a missing metering cup plug in the upper oil pan causing reduced oil flow through the oil cooler. Remanufactured engines built on 1-Mar-2019 and through 13-May-2019 may be affected. If a vehicle exhibits this concern, use the Report a Vehicle Concern link at the bottom of the OASIS tab and submit a report. Include the engine serial number and engine build date in the report. The dealership may be contacted for further details and possible repair direction.
SSM 48130
Service Bulletin/Repair Instructions
Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
18M05
Service Bulletin/Repair Instructions
Customer Satisfaction Program 18M05 Certain 2011-2012 Model Year F-450 and F-550 Vehicles Equipped with a 6.7L Engine Turbocharger Extended Warranty Coverage
SSM 48044
Service Bulletin/Repair Instructions
Some 2011-2019 F-Super Duty vehicles equipped with a 6.7L engine may come in for scheduled maintenance on the engine mounted fuel filter. When reconnecting a fuel line quick connect fitting back onto the engine mounted fuel filter housing, push the connector all the way onto the fuel filter connection port. For some vehicles, you may need to depress a retainer clip to lock the quick connect port into place. Once the fitting is latched fully onto the connection port, pull straight backward on the fuel line to verify it is fully latched onto the connection port. Do not bend the fuel line connection when pulling to verify it is connected. Refer to Workshop Manual sections 310-00 for details on quick connect fittings.
SSM 47979
Service Bulletin/Repair Instructions
Some 2005-2019 F-Super Duty 4x4 vehicles operated in extreme dust, mud or tar sand conditions may exhibit accelerated 4x4 vacuum hub seal and or wheel bearing wear as a result of harsh operating conditions. A knuckle seal shield kit is now available for customer purchase. The kit is designed for severe duty and is non warrantable. The knuckle seal shield kit GC3Z-54024A38-A includes an installation instruction sheet
SSM 47976
Service Bulletin/Repair Instructions
On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
TSB19-2143
Service Bulletin/Repair Instructions
Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a lack of power and/or illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0299 in the powertrain control module (PCM). This may be due to the charge air cooler (CAC) outlet tube assembly becoming disconnected at the throttle body or a separation at the CAC tube crimp clamp. To resolve this concern, follow the Service Procedure steps to replace the CAC outlet tube assembly.Follow the service procedure steps to correct the condition.
SSM 47948
Service Bulletin/Repair Instructions
SSM 47948 - 2010-2019 Various Vehicles - Turbocharged Engines - Oil Supply Filter Replacement When Replacing The Turbocharger Or The Turbocharger Oil Supply Tube For 2010-2019 vehicles equipped with turbocharged engines, when diagnosing and/or replacing turbo related concerns, all steps within the Workshop Manual (WSM) procedure must be followed including replacement of all mandatory discarded parts. When specified in the WSM, the turbocharger oil supply filter must be replaced whenever the turbocharger or the turbocharger oil supply tube are replaced. Turbocharger bearing failure may occur if oil starvation occurs due to a restricted filter.
SSM 47836
Service Bulletin/Repair Instructions
Some 2011-2019 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking/tapping noise traced to the reductant injector.
18M04
Service Bulletin/Repair Instructions
Certain 2011-2012 Model Year 6.7L F-450-F-550 Chassis Cab Vehicles Over 14K GVWR - NOx Sensor Extended Warranty Coverage
SSM 47641
Service Bulletin/Repair Instructions
Some 2011-2019 F-Super Duty, 2015-2019 Transit, 2016-2019 F-650/F-750 and 2018 F-150 vehicles equipped with a 6.7L, 3.2L or 3.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P207F, P20EE, P229F, P2201 and/or P24AE. This may be a result of using aftermarket cleaning liquids or tools for the exhaust gas recirculation (EGR) cooler or intake. Ford does not recommend the cleaning of diesel intakes or EGR coolers using any aftermarket tool that injects a cleaning foam or liquid substance into the EGR cooler or intake. Using these types of fluids can result in sodium poisoning of the NOx and particulate matter (PM) sensors resulting in degraded operation and permanent damage to the aftertreatment system. Use of these cleaning tools may void the emissions warranty of the hot end aftertreatment exhaust system and the attached emissions sensors.
SSM 47402
Service Bulletin/Repair Instructions
When performing diagnostics for DTCs P2201, P2452, P2459, P246C and/or P2463, a manual regeneration and diesel particulate filter (DPF) parameter reset using the appropriate scan tool may need to be performed. To perform the manual regeneration, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Manual Regeneration. The scan tool may indicate that a regeneration of the DPF is not recommended at this time, selecting YES on this screen will allow the regeneration process to complete. To perform the DPF parameter reset, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Parameter Reset.
tsb18-2190
Service Bulletin/Repair Instructions
Some 2011-2012 F-250/F-350 and 2011-2015 F-450/F-550 vehicles equipped with a 6.7L diesel engine built on or before 9-Dec-2014 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2043, P205C and/or P205D. Follow the Service Procedure steps to correct the condition.
SSM 47080
Service Bulletin/Repair Instructions
2010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
SSM 47028
Service Bulletin/Repair Instructions
Some 2011-2018 F-Super Duty 6.7L diesel equipped vehicles may exhibit a ticking noise at idle after an engine oil change. It is often referred to as Typewriter Noise because of its similarity to the sound of a mechanical typewriter. When engine temperatures reach 150 Å?F (65 Å?C) or higher, (from engine idle up to approximately 1700 RPM's), this noise can typically be heard at the front wheel well and is often isolated to the transmission bell housing or oil pan area. Typewriter Noise is not detrimental to engine function or durability and has no short or long term effects on the engine. Do not attempt repairs to eliminate this noise. This noise is characteristic of the 6.7L diesel engine and will typically cease or diminish significantly within the oil change maintenance interval.
SSM 47009
Service Bulletin/Repair Instructions
The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
SSM 46900
Service Bulletin/Repair Instructions
Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
SSM 46892
Service Bulletin/Repair Instructions
Some 2011 2014 SuperDuty vehicles equipped with 6.7L Diesel engine may experience an exhaust leak due to broken exhaust manifold studs. New parts have been released to service this condition. Replace the exhaust manifold on the side with a broken stud. On cylinders 1,2,3,5,6 and 7 use stud part number W715713-S431. If replacing the studs on cylinders 4 and/or 8 use stud part number W717172-S900 and replace both studs and install new spacers and heat shields on the affected side(s). Refer to Workshop Manual Section 303-01. Part numbers: Heat shield left side, FC3Z-9Y427-A and DC3Z-9A462-B for the right side. Spacer part numbers: FC3Z- 00810-A. Exhaust manifold part numbers: DC3Z-9430-A (RH) and DC3Z-9431-A (LH). Exhaust Manifold Gaskets: FC3Z-9448-A. Exhaust Manifold Nut: W701706-S430
SSM 46451
Service Bulletin/Repair Instructions
2009-2017 VEHICLES EQUIPPED WITH A 6R80, 6R100, 6R140 AUTOMATIC TRANSMISSION HAVE AN UPDATED MAIN CONTROL VALVE BODY OVERHAUL PROCEDURE. REFER TO WORKSHOP MANUAL (WSM), SECTION 307-01 FOR MAIN CONTROL VALVE BODY (7A100) OVERHAUL PROCEDURES. NOT ALL VALVE BODIES REQUIRE REPLACEMENT. INSPECT THE VALVE BODY BORES, SPRINGS AND VALVES AS DIRECTED DURING DIAGNOSIS AND REPAIR. REFER TO GENERAL SERVICE BULLETIN (GSB) G0000093 AUTOMATIC TRANSMISSION MAIN CONTROL INSPECTION FOR A VIDEO CLIP TO AID IN THE DIAGNOSIS OF THESE REPAIRS.
SSM 46407
Service Bulletin/Repair Instructions
SOME 2011-2017 F-SUPER DUTY 6.7L DIESEL EQUIPPED VEHICLES MAY EXHIBIT A TICKING NOISE AT IDLE AFTER AN ENGINE OIL CHANGE. IT IS OFTEN REFERRED TO AS TYPEWRITER NOISE BECAUSE OF ITS SIMILARITY TO THE SOUND OF A MECHANICAL TYPEWRITER. WHEN ENGINE TEMPERATURES REACH 150 ÅF (65 ÅC) OR HIGHER, (FROM ENGINE IDLE UP TO APPROXIMATELY 1700 RPM'S), THIS NOISE CAN TYPICALLY BE HEARD AT THE FRONT WHEEL WELL AND IS OFTEN ISOLATED TO THE TRANSMISSION BELL HOUSING OR OIL PAN AREA. TYPEWRITER NOISE IS NOT DETRIMENTAL TO ENGINE FUNCTION OR DURABILITY AND HAS NO SHORT OR LONG TERM EFFECTS ON THE ENGINE. DO NOT ATTEMPT REPAIRS TO ELIMINATE THIS NOISE. THIS NOISE IS CHARACTERISTIC OF THE 6.7L DIESEL ENGINE AND WILL TYPICALLY CEASE OR DIMINISH SIGNIFICANTLY WITHIN THE OIL CHANGE MAINTENANCE INTERVAL.
SSM 46345
Service Bulletin/Repair Instructions
SOME 2005-2017 F-SUPER DUTY 4X4 VEHICLES OPERATED IN EXTREME DUST, MUD OR TAR SAND CONDITIONS MAY EXHIBIT ACCELERATED 4X4 VACUUM HUB SEAL AND OR WHEEL BEARING WEAR AS A RESULT OF HARSH OPERATING CONDITIONS. A KNUCKLE SEAL SHIELD KIT IS NOW AVAILABLE FOR CUSTOMER PURCHASE. THE KIT IS DESIGNED FOR SEVERE DUTY AND IS NON WARRANTABLE. THE KNUCKLE SEAL SHIELD KIT GC3Z-54024A38-A INCLUDES AN INSTRUCTION SHEET.
SSM 46332
Service Bulletin/Repair Instructions
REPLACING THE ORIGINAL EQUIPMENT SYNC/NAVIGATION SYSTEM WITH EITHER AN AFTERMARKET SYNC/NAVIGATION KIT OR MODIFYING ORIGINAL SYNC/NAVIGATION PARTS TO PROVIDE ADDITIONAL FEATURES IS NOT RECOMMENDED NOR SUPPORTED ON ANY FORD, MERCURY OR LINCOLN VEHICLE. ONLY APPROVED GENUINE FORD ACCESSORIES OR ORIGINALLY INSTALLED SYSTEMS ARE SUPPORTED AND CERTIFIED TO FUNCTION CORRECTLY WITH OTHER VEHICLE SYSTEMS. IF YOU SUSPECT A SYSTEM HAS BEEN MODIFIED, THE FOLLOWING RESOURCES CAN BE USED TO VERIFY ORIGINAL EQUIPMENT: MONRONEY LABEL (WINDOW STICKER), PROFESSIONAL TECHNICIAN SOCIETY (PTS) OASIS TAB SELECT SYNC OR HVBOM. FOR GENUINE FORD ACCESSORIES USE: PTS WORKSHOP TAB SELECT DEALER INSTALLED ACCESSORY OR ACCESSORY INSTALLATION.
DOR-G6X2Z-01
Service Bulletin/Repair Instructions
This SKU is a filter cap kit. Based on feedback from our Customers, additional o-rings would need to be purchased separately by them to replace worn or aged seals. This Customer communication requested return of unsold inventory to add the three o-rings to the kits to improve Cusotmer satisfaction.
TSB 16-0154
Service Bulletin/Repair Instructions
SOME 2011-2016 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE, MAY EXHIBIT AN ILLUMINATED MIL WITH DTCS P208E AND/OR P218F STORED IN THE POWERTRAIN CONTROL MODULE (PCM) MEMORY DUE TO UREA CRYSTALS FORMING ON THE REDUCTANT INJECTOR NOZZLE. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
TSB 16-0136
Service Bulletin/Repair Instructions
SOME 2011-2016 F-SUPER DUTY PICKUP VEHICLES BUILT ON OR BEFORE 23-FEB-2016 AND EQUIPPED WITH A 6.7L DIESEL ENGINE MAY EXHIBIT A RUNS ROUGH/MISFIRE CONDITION ONLY DURING THE EXHAUST REGENERATION PROCESS. THIS CONDITION TYPICALLY OCCURS ON LIGHT THROTTLE TIP IN BETWEEN 64-113 KM/H (40-70 MPH) AND WILL NOT SET DIAGNOSTIC TROUBLE CODES (DTCS). THE CONCERN MAY BE INTERMITTENT AND A KNOCKING NOISE MAY BE PRESENT DURING THE CONCERN. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
TSB16-0098
Service Bulletin/Repair Instructions
SOME 2011-2016 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE THAT ARE PRIMARILY IN A STATIONARY OR OFF-HIGHWAY LOW SPEED USE MAY EXHIBIT FREQUENT EXHAUST REGENERATION ATTEMPTS, DRIVE TO CLEAN MAINTENANCE MESSAGES, THE WRENCH LIGHT ON AND/OR DIAGNOSTIC TROUBLE CODE (DTC) P2459 FOR FREQUENT REGENERATION. IF REGENERATION ATTEMPTS ARE UNSUCCESSFUL, DTC P2463 MAY SET AS A RESULT OF SOOT ACCUMULATION IN THE DIESEL PARTICULATE FILTER (DPF). VEHICLES OPERATED IN THIS MANNER MAY NOT EASILY ALLOW FOR NORMAL EXHAUST REGENERATION AND MAY BENEFIT FROM OCR CAPABILITY SO THE UNIT CAN PERFORM COMPLETE REGENERATION CYCLES IN A STATIONARY SETTING. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
SSM 45900
Service Bulletin/Repair Instructions
2011-2016 F-SUPER DUTY EQUIPPED WITH OPTIONAL RUNNING BOARDS - OPERATING VEHICLE OFF-ROAD OR LOW GROUND CLEARANCE - DAMAGE TO SIDE SILL
16B24
Service Bulletin/Repair Instructions
CERTAIN 2011-2012 MODEL YEAR F-SUPER DUTY CHASSIS CAB VEHICLES EQUIPPED WITH A 6.7L DIESEL ENGINE - POWERTRAIN CONTROL MODULE REPROGRAMMING
TSB-16-0087
Service Bulletin/Repair Instructions
SOME 2011-2016 F-SUPER DUTY CREW CAB PICKUP VEHICLES EQUIPPED WITH AN 8 FOOT BOX AND A FACTORY TRAILER HITCH MAY EXHIBIT A VERTICAL VIBRATION, OFTEN DESCRIBED AS HOPPING, FROM 68-112 KM/H (42-70 MPH).
TSB160064
Service Bulletin/Repair Instructions
6.7L Diesel - fuel knock at idle with malfunction indicator lamp (MIL) Illulminated with multiple diagnostic trouble codes (DTCS)
16-0049
Service Bulletin/Repair Instructions
6.7L DIESEL - FUEL KNOCK AT IDLE WITH MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED WITH MULTIPLE DIAGNOSTIC TROUBLE CODES (DTCS) ISSUE Some 2011-2016 F-Super Duty vehicles equipped with a 6.7L diesel engine may exhibit a fuel knock type noise at idle, illuminated MIL with one or more of the following DTCs: P0263, P0266, P0269, P0272, P0275, P0278, P0281, P0284, P02DA, P02D0, P02D1, P02D2, P02D3, P02D4, P02D5, P02D6, P02D7, P02D8, P02D9, P02CC, P02CD, P02CE and/or P02CF stored in powertrain control module (PCM) memory.
TSB160049
Service Bulletin/Repair Instructions
6.7L Diesel - Fuel knock at idle with malfunction indicat or lamp (MIL) Illuminated with multiple diagnostic trouble codes (DTCSF)
TSB160034
Service Bulletin/Repair Instructions
6.7L Malfunction indicator Lamp (MIL) Illuminatedc with diagnostic trouble codes (DTCS p208E, p218F, p204F
LTR3756
Service Bulletin/Repair Instructions
49 CFR Part 579.5 Monthly Communications - January 2016
TSB160001
Service Bulletin/Repair Instructions
49 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
TSB160057
Service Bulletin/Repair Instructions
Torqshift Transmission - Malfunction indicator lamp (MIL) diagnostic trouble codes (DTCS) P0751, P0730 and/or P2700
TSB150164
Service Bulletin/Repair Instructions
Exterior Mirror - Tubular stainless steel west cpast style mirror - Loose mounting bracket
SB-45306
Service Bulletin/Repair Instructions
FORD 2011-2016 F-SUPER DUTY: VARIOUS DIAGNOSTICS TROUBLE CODES; FUEL KNOCK NOISE AT IDLE WITH CONTRIBUTION OF CYLINDER *CN
44863
Service Bulletin/Repair Instructions
FORD: NO SERVICE ACTION IS RECOMMENDED FOR THIS CONDITION. PLEASE USE AT YOUR DISCRETION. VARIOUS 2010-2015 VEHICLES MAY EXPERIENCE A TURBULENCE NOISE, SIMILAR TO AN HELICOPTER NOISE, AT HIGHWAY SPEEDS WHEN THE REAR DOOR WINDOW(S) OR SUNROOF ARE OPEN. *TA
ASI-45222
Service Bulletin/Repair Instructions
FORD: WHEN SOME DIESEL TRUCKS ARE IDLING, WOULD EXPERIENCE A TYPE OF FUEL KNOCKING NOISE WITH ONE OR MORE CYLINDER CONTRIBUTION BALANCE. MODEL 2011-16 F-SUPER DUTY. *PE
ASI-45226
Service Bulletin/Repair Instructions
FORD: ON SOME DIESEL TRUCKS, VARIOUS COMBINATION OF DIAGNOSTIC TROUBLE CODES (DTC) FOR LOOSE, MODIFIED, DAMAGED OR MISSING GROUND G400 WHICH WAS RELOCATED BY BODY BUILDERS OUTFITTERS ON VEHICLE MODIFICATION. MODEL 2011-16 F SUPER DUTY. *PE
ASI-45227
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS WILL OR MAY EXPERIENCE A LEANING TO ONE SIDE OF THE PICK UP BED OR BODY CAB AND MAYBE AFFECTED BY LOADING VEHICLE. MODEL 2011-16 F-SUPER DUTY. *PE
ASI-45188
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TSB-15-0088
Service Bulletin/Repair Instructions
FORD: WHEN IDLING FOR LONG PERIODS OF TIME OR DRIVING SHORT DISTANCES, DURING EXHAUST REGENERATION PROCESS, SOME VEHICLES WILL EXPERIENCE A ROUGH RUN CONDITION AND DRIVE CYCLE INSUFFICIENT. MODEL 2011-15 F SUPER DUTY. *PE
15M01
Service Bulletin/Repair Instructions
THIS TSB CONTAINS AN OWNER LETTER NOTIFICATION. SEE DOCUMENT SEARCH BUTTON BELOW. ON CERTAIN MODEL TRUCKS, WITH 6.7L DIESEL ENGINE EXHAUST GAS SENSORS, HAS EXTENDED COVERAGE APPLIED DUE TO ILLUMINATION OF SERVICE ENGINE SOON INDICATOR MALFUNCTIONING WITH EGT SENSORS. MODEL 2011-12 F-SUPER DUTY. *LJ UPDATED 9/10/15. *PE
ASI-45112
Service Bulletin/Repair Instructions
FORD: FLUID PRESSURE MALFUNCTIONS AND TRANSMISSION DAMAGE DUE TO FAILURE TO REMOVE MAIN CONTROL (7A100) AFTER PUMP REMOVAL AND REPLACEMENT (7A103). MODEL 2011-15 F-SUPER DUTY. *PE
ASI-45121
Service Bulletin/Repair Instructions
FORD: ON SOME TRUCKS WITH ELECTRONIC 4WD SHIFT, AXLE SEAL (3254) NEEDS REPLACEMENT DUE TO VACUUM LEAKS AND IF REQUIRES REPAIR OR SERVICE, AXLE SEAL KIT IS AVAILABLE. MODEL 2011-15 F SUPER DUTY. *PE
TSB-15-0010
Service Bulletin/Repair Instructions
FORD: DELAYED REVERSE ENGAGEMENT, A 2-3 SHIFT FLARE AND/OR MALFUNCTION INDICATOR LIGHT (MIL) MAY BE EXHIBIT AFTER AN EXTENDED SOAK. MODEL 2011 F-SUPER DUTY. *PE
44848
Service Bulletin/Repair Instructions
FORD: CERTAIN 2011-2015 FORD F-SUPER DUTY WITH 6.7 DIESEL ENGINES MAY EXPERIENCE A VIBRATION BUZZ NOISE FROM THE DIESEL FUEL CONDITIONING MODULE (DFCM) AND/OR MAY 10/1/1 PRESSURE FUEL LINES W/O DIAGNOSTIC TROUBLE CODE POOSA. *TA
TSB-14-0177
Service Bulletin/Repair Instructions
FORD: THERE IS A DELAYED TRANSMISSION ENGAGEMENT, INTERMITTENTLY, IN EITHER DRIVE OR REVERSE DUE TO ENGINE BEING OFF FOR 2-3 HOURS OR PUMP IS LOSING PRIME. MODEL 2011-12 F SUPER DUTY. *PE
TSB-14-0174
Service Bulletin/Repair Instructions
FORD: WITH MULTIPLE DIAGNOSTIC TROUBLE CODES (DTC) STORED IN POWERTRAIN CONTROL MODULE, THE MALFUNCTION INDICATOR LAMP (MIL) WILL ILLUMINATE. MODEL 2011-12 F-SUPER DUTY. *PE
TSB-14-0171
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS EXPERIENCING AN EXHAUST REGENERATION ATTEMPTS, DRIVE TO CLEAN MESSAGES, WRENCH LIGHT ON, WHEN PRIMARILY IN STATIONARY OR OFF HIGHWAY LOW SPEED USE. MODEL 2011-15 F-SUPER DUTY. *PE
ASI-44705
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS EXPERIENCING VARIOUS DIAGNOSTIC TROUBLE CODES (DTCS) STORED IN POWERTRAIN CONTROL MODULE (PCM) MEMORY AND DTCS CAN NOT BE DIAGNOSE UNTIL PCM MEMORY IS CLEARED OF DTCS. MODEL 2011-2015 F SUPER DUTY. *PE
CSP-14N02
Service Bulletin/Repair Instructions
FORD/LINCOLN: THERE IS AN EXTENDED WARRANTY COVERAGE FOR THE LOSS OF ABS SPEED SIGNAL RELATED COMMUNICATION THAT DISABLE OBDII SYSTEM MONITORS FOR PCM REPROGRAMMING. MODEL 2011-14 F-SUPER DUTY, ESCAPE, TAURUS, FUSION, MKT, MKZ. *PE
ASI-44669
Service Bulletin/Repair Instructions
FORD/LINCOLN: THERE WILL BE 2 NEW PIECE RECEIVER DRYER DESICCANT BAG THAT WILL REPLACE 1 PIECE RECEIVER DRY CARTRIDGE, WHICH ARE INTERCHANGABLE, FULLY, DO NOT AFFECT FORM, FIT, OR FUNCTION. MODEL 2011-14 F-SUPER DUTY, 2009-14 F150, 2007-14 EXPEDITION/NAVIGATOR. *PE
ASI-44681
Service Bulletin/Repair Instructions
FORD: FUSE 33 NEED INSPECTING IN BATTERY JUNCTION BOX (BJB) FOR OPEN CONDITION IF TRUCKS EXHIBITING MALFUNCTION INDICATOR LAMP ILLUMINATION AND VARIOUS DTC WITH CRANK NO START OR ROUGH IDLE CONDITION. MODEL 2011-15 F SUPER DUTY. *PE
TSB-14-0127
Service Bulletin/Repair Instructions
FORD: DUE TO A BROKEN EXHAUST VALVE, ON SOME TRUCKS, IT WOULD HAVE A NO CRANK OR RUNS ROUGH AND MULTIPLE DTC MAY BE STORE IN POWERTRAIN CONTROL MODULE (PCM) DUE TO DAMAGED GLOW PLUG. MODEL 2011 F-SUPER DUTY. *PE
CSP-13B16
Service Bulletin/Repair Instructions
LINCOLN/FORD: IN POWERTRAIN CONTROL MODULE (PCM), THAT ALLOWS ANTI LOCK BRAKE SYSTEM (ABS) AND OUTPUT SHAFT SPEED SENSOR (OSS) SIGNAL FAULTS, A SOFTWARE ERROR HAS OCCUR AND DISABLED ON BOARD DIAGNOSTIC (OBD) MONITORS WITH NO ILLUMINATION OF MALFUNCTION INDICATOR LAMP (MIL). MODEL 2011-2014 F-SUPER DUTY, ESCAPE, TAURUS,FUSION, MKT, MKZ. *PE
ASI-44528
Service Bulletin/Repair Instructions
FORD: AFTER COLD START IN AMBIENT TEMPERATURES, THE ENGINE MAY EXPERIENCE A GROWLING, HISSING, METALLIC KIND OF NOISE. MODEL 2011-2015 F-SUPER DUTY. *PE
ASI-44531
Service Bulletin/Repair Instructions
LINCOLN/FORD: ON SOME VEHICLES AND TRUCKS, THERE IS A POPPING, SQUEALING, BINDING OR GRINDING NOISE COME FROM POWER SEATS WHEN MOVING BACKWARDS OR FORWARD. MODEL 2009-2015 F-150, TAURUS, FLEX, MKT, MKS, F-SUPER DUTY, EXPLORER. *PE
ASI-44534
Service Bulletin/Repair Instructions
FORD: WHEN SHIFTING BETWEEN PARK, REVERSE AND/OR DURING 2-3 SHIFT, AN INTERMITTENT CLUNK OCCURS WITH A TORQSHIFT TRANSMISSION. MODEL 2003-2014 F-SUPER DUTY, E SERIES, EXCURSION, F-53 MOTORHOME CHASSIS, LOW CAB FORWARD. *PE
ASI-44543
Service Bulletin/Repair Instructions
FORD: DUE TO POSSIBLE CONTAMINATION OF METAL, DIESEL EXHAUST FLUID (DEF), GASOLINE, A HIGH PRESSURE FUEL SYSTEM KIT IS NOW AVAILABLE, WHEN REPLACEMENT IS REQUIRED FOR DIESEL ENGINE. MODEL 2011-2014 F-SUPER DUTY. *PE
ASI-44568
Service Bulletin/Repair Instructions
FORD: DURING MODIFICATIONS OF VEHICLE, MISSING, MODIFIED, DAMAGED, OR LOOSE GROUND G400, CAUSED MALFUNCTION INDICATOR LIGHT (MIL) ON AND MAY RELOCATE, FROM ORIGINAL LOCATION, BY BODY BUILDERS/UPFITTERS. MODEL 2011-2015 F-SUPER DUTY. *PE
TSB-14-0092
Service Bulletin/Repair Instructions
FORD: THE INSTRUMENT PANEL CLUSTER (IPC) IS ILLUMINATED WITH WARNING MESSAGE DISPLAYING EXHAUST FLUID SYSTEM FAULT AND POWERTRAIN CONTROL MODULE (PCM) SOFTWARE HAS IMPROVED MONITORS WITH AVAILABLE CALIBRATION. MODEL 2011-2012 F-SUPER DUTY. *PE
TSB-14-0093
Service Bulletin/Repair Instructions
FORD: THE EXHAUST REGENERATION MAY HAVE FREQUENT WARNING MESSAGES AND/OR WRENCH LIGHT ICON, IN INSTRUMENT PANEL, DUE TO DIESEL CHASSIS CAB BEING USED AS STATIONARY OR OFF-HIGHWAY. MODEL 2011-2012 F-SUPER DUTY. *PE
TSB-14-0094
Service Bulletin/Repair Instructions
FORD: THE POWERTRAIN CONTROL MODULE (PCM) SOFTWARE MAY CAUSE DIESEL ENGINE TO HESITATE AT LOW SPEED OR HAVE AN INTERMITTENT SURGE TIP IN ACCELERATION. MODEL 2011-2012 F-SUPER DUTY. *PE
TSB-14-0095
Service Bulletin/Repair Instructions
FORD: DUE TO POWERTRAIN CONTROL MODULE (PCM), ON SOME TRUCKS, EXHIBITS MALFUNCTION INDICATOR LAMP (MIL) AND DIAGNOSTIC TROUBLE CODE (DTC) P054F OF UNEXPECTED HIGHER QUANTITY OF FUEL AND IDLE CONTROL SYSTEM. MODEL 2011-2012 F-SUPER DUTY. *PE
TSB-14-0084
Service Bulletin/Repair Instructions
FORD/LINCOLN: SOME TRUCKS ARE EXPERIENCING DIAGNOSTIC TROUBLE CODES (DTC) P2270 OR P2272, MALFUNCTION INDICATOR LAMP (MIL) COMES ON. MODEL 2010-2011 RANGER, 2010-2012 E SERIES, EXPEDITION, F-150, F-SUPER DUTY, NAVIGATOR. *PE
TSB-13-6-24
Service Bulletin/Repair Instructions
FORD: THE MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATES WITH DIAGNOSTIC TROUBLE CODES (DTCS), ON SOME TRUCK ENGINES, P207F, P2033, P2200, P2201, P2209, P164A, P2100 AND/OR P0133. MODEL 2011-2012 F-SUPER DUTY. *PE UPDATED 1/15/14. *PE
ASI-44118
Service Bulletin/Repair Instructions
FORD: THERE MAY BE VIBRATION OR BUZZING OR GROWLING NOISE, IN SOME TRUCKS, FROM DIESEL FUEL CONDITIONING MODULE (DFCM) AND/OR LOW PRESSURE FUEL LINES WHEN TRUCK HAS 1/4 LEVEL OR BELOW FUEL IN TANK AND IS CONSIDERED NORMAL. MODELS 2011-2014 F-SUPER DUTY. *PE
ASI-44120
Service Bulletin/Repair Instructions
FORD: AFTER AN ENGINE OIL CHANGE, THE TRUCK WOULD MAKE A TICKING NOISE WHEN IDLING AND COMING FROM THE FRONT WHEEL WELL. MODELS 2011-2014 F-SUPER DUTY. *PE
ASI-44121
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS, WHEN ENGINE OIL TEMPERATURE, FOR DIESEL, IS BELOW 150F (65C) AND/OR OSCILLATING TURBO WHINE AT IDLE, A TURBO SPOOL DOWN (HOOT) NOISE IS HEARD ON THROTTLE TIP OUT. MODEL 2011-2014 F-SUPER DUTY. *PE
ASI-44122
Service Bulletin/Repair Instructions
FORD: DUE TO DESIGN DIFFERENCES OF TURBOCHARGER AND AIR INTAKE SYSTEMS, SOME DIESEL TRUCKS MAY EXPERIENCE, WHEN ACCELERATING FROM A STOP, A CHARACTERISTIC TURBO LAG. MODEL 2011-2014 F250, F350, F450, F550. *PE
ASI-44125
Service Bulletin/Repair Instructions
FORD: CONTAMINATION OF DIESEL EXHAUST FLUID (DEF) FROM PETROLEUM BASED PRODUCT (SUCH AS DIESEL FUEL), TRUCKS MAY EXHIBIT MALFUNCTION INDICATOR LIGHT (MIL) WITH DTC P20E8, P202D AND/OR P207F, CAUSING RUBBER SEALS AND O RINGS TO SWELL AND/OR LEAK, IN SYSTEM. MODEL 2011-2014 F SUPER DUTY. *PE
ASI-44126
Service Bulletin/Repair Instructions
FORD: ON SOME TRUCKS, DUE TO A LOOSE, MISSING, MODIFIED OR DAMAGED GROUND G400, THE EXHAUST REDUCTANT SYSTEM OR NOX CONTROL MODULE MAY EXHIBIT VARIOUS MIL DTCS RELATED TO GLOW PLUG CONTROL MODULE (GPCM) AND THE G400 SHOULD BE RELOCATED, NOT ON CROSS MEMBER OR WELDED EXTENSION BUT MAIN FRAME RAIL. MODELS 2011-2014 F SUPER DUTY. *PE
ASI-44140
Service Bulletin/Repair Instructions
FORD: ON SOME TRUCKS, THE TRANSMISSION BELLHOUSING AREA IS EXPERIENCING A FLUID LEAKAGE FROM FRONT COVER AND DUE TO OIL, COOLANT AND OTHER FLUIDS COLLECTING AND DRAINING, IN AND OUT, OF FRONT OR REAR ENGINE VALLEY. MODEL 2011-2014 F-SUPER DUTY. *PE
TSB-13-6-5
Service Bulletin/Repair Instructions
FORD: ON SOME TRUCKS, A MALFUNCTION INDICATOR LAMP (MIL) WITH DTC P0401, CAUSES A RESTRICTION OF EXHAUST GAS RECIRCULATION (EGR) COOLER CORE. MODEL 2011-2012 F-SUPER DUTY. *PE
TSB-13-6-7
Service Bulletin/Repair Instructions
FORD: WHEN TURNING, THERE IS A POPPING OR CLUNKING NOISE THAT IS HEARD OR FELT, UNDER FLOOR PAN, IN SOME VEHICLES AND MORE NOTICEABLE WHEN WEATHER IS COLD. MODEL 2008-2012 F-SUPER DUTY. *PE
ASI-32252
Service Bulletin/Repair Instructions
LINCOLN/FORD: ON CERTAIN VEHICLES AND TRUCKS, THE MULTIFUNCTION INDICATOR LAMP (MIL), WILL ILLUMINATE WITH DIAGNOSTIC TROUBLE CODE (DTC) P1636 (INDUCTIVE SIGNATURE CHIP COMMUNICATION ERROR) PRESENT IN PCM OR TCM. MODELS 2011-2013 F-150 EXPEDITION, NAVIGATOR, F-SUPER DUTY, 2010-2014 MUSTANG. *PE
TSB-13-5-17
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS WITH DIESEL ENGINE, WOULD EXPERIENCE A MISFIRE OR RUNNING ROUGH CONDITION DURING EXHAUST REGENERATION PROCESS. MODELS 2011-2013 F-SUPER DUTY. *PE
TSB-13-5-9
Service Bulletin/Repair Instructions
FORD: SOME TRUCKS, DURING THE EXHAUST REGENERATION PROCESS, THE DIESEL ENGINE MAY MISFIRE OR HAVE RUN ROUGH CONDITION. MODELS 2011-2013 F-SUPER DUTY. *PE
AS1-32241
Service Bulletin/Repair Instructions
FORD: ON VARIOUS VEHICLES WITH MY TOUCH,AFTER ANY APIM PROGRAMMING, REPLACEMENT OR DISCONNECT FROM FRONT DISPLAY INTERFACE MODULE (FDIM), TOUCHSCREEN CALIBRATION MUST BE PERFORMED. MODEL YEARS 2011-2013. NO MODELS LISTED. *PE
ASI-32203
Service Bulletin/Repair Instructions
FORD: IN SOME SUPER DUTY TRUCKS, THERE IS A CHARACTERISTIC TURBO NOISE WHEN ENGINE OIL TEMPERATURE (EOT) IS BELOW 150F (65C) AND/OR AN OSCILLATING TURBO WHINE AT IDLE WHEN EOT IS BELOW 50F (65C). MODEL 2011-2013 F SUPER DUTY. PE
ASI-32204
Service Bulletin/Repair Instructions
FORD: ON SOME SUPER DUTY TRUCKS, DUE TO OIL, COOLANT OR OTHER FLUIDS COLLECTING IN ENGINE VALLEY AND DRAINING OUT, FLUID IS LEAKING FROM FRONT COVER AND/OR TRANSMISSION BELLHOUSING AREA. MODEL 2011-2013 F-SUPER DUTY. *PE
ASI-32209
Service Bulletin/Repair Instructions
FORD: SOME VEHICLES MAY EXPERIENCE VARIOUS MIL DTC'S RELATED TO GLOW PLUG CONTROL MODULE (GPCM), EXHAUST REDUCTANT SYSTEM OR NOX CONTROL MODULE DUE TO LOOSE, MISSING, MODIFIED OR DAMAGED GROUND G400. NO MODELS OR YEARS LISTED. *PE
ASI-32247
Service Bulletin/Repair Instructions
FORD: ON SOME TRUCKS, THE REPLACEMENT OF (7A100) MAIN CONTROL ASSEMBLY IS NO LONGER NECESSARY WHEN NORMAL DIAGNOSTICS LEAD TO TRANSMISSION SOLENOID REPLACEMENT WHERE A BAND 1 SOLENOID IS USED. MODELS 2011-2013 F-SUPER DUTY TRUCK. *PE
CSP-12B33
Service Bulletin/Repair Instructions
FORD: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THE DIESEL ENGINE POWER MAY BECOME REDUCED IF THE NITROGEN OXIDE (NOX) SENSOR IS INOPERATIVE, IN THE EXHAUST SYSTEM, AND CAUSE CHECK ENGINE LIGHT TO COME ON. *PE
12-3-15
Service Bulletin/Repair Instructions
FORD: SOME 2009- 2011 E-SERIES, F-SUPER DUTY-F-53 MOTORHOME AND F-59 STRIPPED CHASSIS VEHICLES EQUIPPED WITH A TORQSHIFT TRANSMISSION MAY EXHIBIT MIL WITH DTCS P0751, P0730 AND/OR P2700. *JS
ASI-22262
Service Bulletin/Repair Instructions
FORD: VEHICLE MAY EXPERIENCE EXHAUST SMOKE, ENGINE KNOCKING, LOW POWER, LONG CRANK HARD START, RUNS ROUGH OR NO CRANK START WHICH MAY BE CAUSED BY CONTAMINATED FUEL. *PE
SB-22261
Service Bulletin/Repair Instructions
FORD: WHEN IDLING FOR EXTENDED TIME OR IN EXTREMELY DUSTY ENVIRONMENT, DIRT/DUST WOULD COME OUT OF VENTS. TO RECIRCULATE AIR, USE VENTILATING AIR CONDITION, HEATING (HVAC) CONTROLS TO PREVENT INGESTION OF DUST/DIRT. *PE
12-2-5
Service Bulletin/Repair Instructions
FORD: SOME VEHICLES EXHIBIT A 4X4 NOT ENGAGING, NOT STAYING ENGAGED AND/OR UNLOCKING IN EXTREME COLD TEMPERATURES BELOW -18 DEGREES CELSIUS OR 0 DEGREES FAHRENHEIT. INCLUDE FORD MODEL F250, F350,F450, AND F550 MODEL YEARS 2011-2012. *JS
ASI-22198
Service Bulletin/Repair Instructions
FORD: A TEST IS REQUIRED FOR HIGH PRESSURE PUMP TO PUSH DEBRIS OUT OF FUEL RAILS FOR INSPECTION. *PE
TSB-11-8-14
Service Bulletin/Repair Instructions
FORD: WHEN MAKING EITHER LEFT OR RIGHT TURNS, THERE IS A LACK OF STEERING ASSIST OR AN EXCESSIVE STEERING EFFORT INVOLVED. *PE
TSB-11-4-14
Service Bulletin/Repair Instructions
FORD: SOME VEHICLES DO NOT UNLOCK USING THE INTELLIGENCE ACCESS KEY OR THE INTEGRATED KEYHEAD TRANSMITTER. *RM
SIS-21828
Service Bulletin/Repair Instructions
FORD: THERE MAY BE HIGH STEERING EFFORT OR LACK OF ASSIST. *RM
SIS-21841
Service Bulletin/Repair Instructions
COMM-TRANS LUND: SOME 2009-2011 MODELS MAY HAVE THE AIR BAG INICATOR FLASHING WITH A STORED TROUBLE CODE. THIS IS A SOFTWARE PROBLEM. *RM
SIS-21847
Service Bulletin/Repair Instructions
FORD: 2011 F-SUPER DUTY. THE MALFUNCITON LIGHT IS ON. THE VEHICLE MAY HAVE A HARD START, NO START, LACK OF POWER, OR MAY RUN ROUGH. *RM
AS-21766
Service Bulletin/Repair Instructions
FORD: IN COLD WEATHER THERE IS A FRONT HUB ENGAGEMENT CONCERN. 2011 F SUPER DUTY. *RM
AS-21769
Service Bulletin/Repair Instructions
FORD: IF THERE IS AN INTERMITTENT LACK OF POWER, SURGE, OR HESITATION WHILE DRIVING THE BRAKES WILL OVERRIDE ACCELERATION. *RM
AS-21820
Service Bulletin/Repair Instructions
FORD: THERE MAY BE FUEL CONTAMINATION CAUSING DAMAGE TO THE FUEL SYSTEM. THE VEHICLE MAY NOT START, HAVE A HARD START, RUN ROUGH, HAVE EXHAUST SMOKE, OR THE ENGINE MAY KNOCK. 2011 F SUPER DUTY. *RM
TSB-11-2-12
Service Bulletin/Repair Instructions
FORD: THE MALFUNCTION LIGHT IS ON WITH THREE POSSIBLE TROUBLE CODES. 2011 F250/F350/F450/F550. *RM
AS-21686
Service Bulletin/Repair Instructions
FORD: MALFUNCTION LIGHT IS ON WITH TWO POSSIBLE TROUBLE CODES STORED. 2011 F SUPER DUTY. *RM
AS-21687
Service Bulletin/Repair Instructions
FORD: THERE MAY BE A LOSS OF POWER, HESITATION, SURGE, OR LACK OF THROTTLE RESPONSE WHILE DRIVING. THE BRAKE OVER ACCELERATOR FEATURE MAY BE ACTIVATING. *RM
TSB-10-22-9
Service Bulletin/Repair Instructions
FORD: THE MALFUNCTION LIGHT IS ON DUE TO AN EXHAUST LEAK AT THE EGR PIPE. THERE ARE TWO POSSIBLE TROUBLE CODES STORED. 2011 F-250/350/450/550. *RM
AS-21579
Service Bulletin/Repair Instructions
FORD: MALFUNCTION LIGHT IS ON WITH A STORED TROUBLE CODE. IT IS A VOLTAGE PROBLEM. 2011 F-SUPER DUTY. *RM
AS-21532
Service Bulletin/Repair Instructions
FORD: THERE MAY BE A LOSS OF POWER, ENGINE SURGE/ HESITATION WHILE DRIVING. THE PCM COULD BE GETTING SIGNALS FROM THE BRAKES AND ACCELERATOR AT THE SAME TIME CAUSING THE BRAKES OVERRIDE TO ACTIVATE. *RM
TSB-10-18-6
Service Bulletin/Repair Instructions
FORD: ON SOME 2010-2011 FORD TRUCKS THERE IS A BRAKE DRAG CONDITION. THERE IS AN IMPROPERLY ADJUSTED STOPLAMP SWITCH. *RM
TSB-10-18-2
Service Bulletin/Repair Instructions
FORD: 2011 F-SUPER DUTY. THERE ARE MANY DIAGNOSTIC TROUBLE CODES. THERE MAY ALSO BE A LOW SPEED ENGINE SURGE, LOW POWER ON ACCELERATION, KNOCKING NOISE, AND HARSH TRANSMISSION SHIFTS. *RM
SB-21483
Service Bulletin/Repair Instructions
FORD: SOME VEHICLES MAY HAVE UNITIATED MYKEY ACTIVATION OR THE CAR ALARM/SOS WILL ACTIVATE. *RM
TSB-10-16-5
Service Bulletin/Repair Instructions
FORD: TRAILER HITCH VEHICLES DURING INSTALLATION OF GOOSENECK BALLS MAY NOT LOCK IN PLACE. 2011 F250/350/450/550. *RM
AS-21448
Service Bulletin/Repair Instructions
FORD: THE VEHICLES MAY EXHIBIT AN OIL LEAK FROM THE TOP OF THE LEFT SIDE OF THE ENGINE. IT MAY COLLECT AROUND THE FUEL INJECTORS. *RM
AS-21457
Service Bulletin/Repair Instructions
FORD: THERE MAY BE AN OIL LEAK FROM THE TURBOCHARGER SUPPLY LINE. 2011 VEHICLES.*RM
AS-21460
Service Bulletin/Repair Instructions
FORD: THE MALFUNCTION LIGHT IS ON WITH A STORED TROUBLE CODE. THERE IS A PROBLEM WITH THE TURBOCHARGER. 2011 F-SUPER DUTY. *RM
AS-21476
Service Bulletin/Repair Instructions
FORD: THE TIRE WEAR MAY BE EXCESSIVE WITH LOW TIRE MILEAGE. THIS MAY BE CAUSED BY HIGHER HORSE POWER AND TORQUE WHILE ACCELERATING AGGRESSIVELY. 2011 F SUPER DUTY. *RM