Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SSM 46900
Service Bulletin/Repair Instructions
Some vehicles may exhibit a no start condition with an illuminated malfunction indicator lamp (MIL) and a DTC P161A after PCM replacement. This may be due to the parameter reset procedure not being properly completed. To clear this DTC, use the Ford Integrated Diagnostic System (IDS) service tool or Ford J2534 Diagnostic Software, select - Toolbox - Body - Security - PATS Functions - Parameter Reset. Follow the on-screen instructions to complete the procedure. This procedure will transfer the existing Key ID information between the modules without the need of having 2 programmed PATS keys present. There is no need to program keys when the PCM is going to be replaced. Additional information can be found in the Workshop Manual (WSM), Section 419-01. Missing or lost keys are not warrantable.
44863
Service Bulletin/Repair Instructions
FORD: NO SERVICE ACTION IS RECOMMENDED FOR THIS CONDITION. PLEASE USE AT YOUR DISCRETION. VARIOUS 2010-2015 VEHICLES MAY EXPERIENCE A TURBULENCE NOISE, SIMILAR TO AN HELICOPTER NOISE, AT HIGHWAY SPEEDS WHEN THE REAR DOOR WINDOW(S) OR SUNROOF ARE OPEN. *TA
44848
Service Bulletin/Repair Instructions
FORD: CERTAIN 2011-2015 FORD F-SUPER DUTY WITH 6.7 DIESEL ENGINES MAY EXPERIENCE A VIBRATION BUZZ NOISE FROM THE DIESEL FUEL CONDITIONING MODULE (DFCM) AND/OR MAY 10/1/1 PRESSURE FUEL LINES W/O DIAGNOSTIC TROUBLE CODE POOSA. *TA
15-0042
Service Bulletin/Repair Instructions
FORD 2011-2012 F250, F350, F450, F550 : INFORMATION REGARDING F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L ENGINE AND BUILT BEFORE 10/11/2011 MAY EXHIBIT A MIL ON WITH DTCS, P207F, P20EE, P2200, P2201, P2209, P164A, P2A00 OR P0133. *LJ