Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
21B09 S2
Service Bulletin/Repair Instructions
Certain 2014-2020 Model Year Multiple Vehicle Lines 3G Telematics Control Unit to 4G Upgrade Kit REASON FOR THIS SUPPLEMENT Program Terms & Urgency / Expiration Date: Program extension until July 31, 2023. Service Action: o IDS level 128 or higher is now required to address various programming issues encountered. o C-MAX Energi vehicles are now serviceable with new software and hardware. Labor Allowances: C-MAX labor has been updated. Parts Requirements / Ordering Information: o The C-MAX 4G Upgrade Kit is now orderable at this time with a new part number. o MKX Rear seat backrest nut claim quantity updated. Technical Information updates: o Ensure IDS level 128 or higher is used. o Toggling Valet Mode is no longer required. o C-MAX Energi instructions are now available. Owner Notification: Non-repaired vehicle owners will be mailed the week of April 17, 2023. Pickup and Delivery: Added Customer Acknowledgement Form - Review form contents with customer prior to kit ordering and obtain customer signature prior to installation for Focus BEV, C-MAX, and Fusion Energi vehicles.
21B09-S1
Service Bulletin/Repair Instructions
Certain 2014-2020 Model Year Multiple Vehicle Lines - 3G Telematics Control Unit to 4G Upgrade Kit. The North America 3G cellular service began decommissioning in August 2021 and a complete shutdown of the 3G network took place in February 2022. Vehicles on the road equipped with a 3G telematics control unit (TCU) / embedded modem will lose mobile app functionality/connectivity.
21B09
Service Bulletin/Repair Instructions
Certain 2014-2020 Model Year Multiple Vehicle Lines 3G Telematics Control Unit to 4G Upgrade Kit The North America 3G cellular service began decommissioning in August 2021 and will be fully decommissioned in February 2022. Vehicles on the road equipped with a 3G telematics control unit (TCU) / embedded modem will lose mobile app functionality/connectivity. Some owners are still within the *complimentary trial period (depending on model year and brand, see table below) for connected services.
TSB 20-2140
Service Bulletin/Repair Instructions
Some 2012-2016 Focus Electric vehicles built on 15-Sep-2011 and through 9-Dec-2015 may exhibit a Stop Safely Now message displayed in the instrument panel cluster (IPC) message center. This may be due to either an internal coolant leak on the upper or lower high voltage battery or corrosion on the lower high voltage battery connector caused by water ingress. If this occurs, the vehicle may not restart once it has been shut off. To resolve the condition, follow the Service Procedure to replace the upper and lower high voltage battery or apply corrosion protection.
SSM 48243
Service Bulletin/Repair Instructions
Some 2012-2016 Focus Electric vehicles may abort the battery energy control module (BECM) on demand self-test but pass the network test. This is the result of a module software limitation and does not indicate an issue is present in the BECM. If the vehicle has the stop safely now message and no other observable symptoms are present, continue with normal diagnostics. If there is a symptom present in addition to the stop safely now message, perform individual self-tests on the other high voltage (HV) modules including the PCM, transmission control module (TCM), secondary on board diagnostic module (SOBDM), air conditioning control module (ACCM), and direct current to direct current (DC/DC) converter modules. Diagnose any DTCs as necessary. If there are no DTCs in other modules but CMDTCs are reported by the BECM, diagnose these DTCs.
SSM 47425
Service Bulletin/Repair Instructions
Some 2016 C-MAX and Focus Electric vehicles built on or after 11-May-2016 may exhibit a false activation of the alarm system. Reprogram the body control module (BCM) to the latest level using Integrated Diagnostic System (IDS) release 110.03 or higher. To correct the concern Make sure you are connected to the internet when entering module programming to obtain the latest updates. Use the applicable labor operation in section 10 of the Service Labor Time Standards manual and causal part 14A068 when claiming repair. Calibration files may also be obtained at www.motorcraftservice.com
SSM 47428
Service Bulletin/Repair Instructions
Some 2013-2018 Fusion Energi, 2012-2018 Focus Electric and 2013-2017 C-MAX Energi vehicles equipped with a TCU built on or before 11-Oct-2017 may exhibit a discharged battery, inoperative remote features via MyFord Mobile app, incomplete user authorization and/or accessory protocol interface module (APIM) DTC U0198 with no modem electronic serial number (ESN) displayed. To correct this condition, perform any open TCU field service actions (FSAs). If U0198 DTC still remains, remove the TCU fuse for 5 minutes then reinstall. Reprogram the TCU using IDS or Ford J2534 Diagnostic Software (FJDS) release 110.03 or higher. An internet connection is required. Calibration files may also be obtained at www.motorcraftservice.com. For claiming, use causal part 14G229 and applicable labor operations in section 10 of the SLTS manual
tsb18-2216
Service Bulletin/Repair Instructions
Some 2012-2018 Focus Electric, 2013-2017 C-Max Energi, and 2013-2018 Fusion Energi plug-in hybrid electric vehicles (PHEV) may exhibit the high voltage (HV) battery failing to charge while connected to the second Generation 120-volt electric vehicle service equipment (EVSE) charge cord. Follow the Service Procedure steps to correct the condition.
17B07
Service Bulletin/Repair Instructions
Certain 2016 C-MAX Energi, 2016 Focus Electric and 2016-2017 Fusion Energi - Telematics Control Unit Reprogramming
SSM 46371
Service Bulletin/Repair Instructions
SOME 2012-2017 FOCUS ELECTRIC/2013-2017 CMAX ENERGI/FUSION ENERGI/2015-2017 MKC/MKZ/2016-2017 MKX AND 2017 CONTINENTAL VEHICLES OPERATING WITH A 3G TCU ON OR BEFORE 16-JAN-2017 MAY NOT RESPOND TO CUSTOMERS REMOTE COMMANDS VIA MYLINCOLN/MYFORD MOBILE PHONE APPLICATIONS. 2G NETWORKS WERE DECOMMISSIONED ON 16-JAN-2017. IF THE 3G TCU WAS OPERATING ON A 2G NETWORK, IT WILL NOT AUTOMATICALLY ATTEMPT TO RECONNECT TO THE REPLACEMENT 3G NETWORK. TO CORRECT, RESET THE TCU BY REMOVING ITS POWER FUSE FOR 5 MINUTES. IF THE CONCERN IS STILL PRESENT, FOLLOW NORMAL DIAGNOSTICS IN WORKSHOP MANUAL (WSM), SECTION 415-00. REFER TO PTS OASIS HOME PAGE FOR TCU VERSION IDENTIFICATION. FOR CLAIMING, USE CAUSAL PART 14G229 AND APPLICABLE LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
15N04-S2
Service Bulletin/Repair Instructions
CERTAIN 2015 MODEL YEAR MKC AND MKZ VEHICLES EQUIPPED WITH THE RESERVE EQUIPMENT GROUP, AND CERTAIN 2012-2016 FOCUS ELECTRIC, C-MAX ENERGI, AND FUSION ENERGI VEHICLES - EMBEDDED MODEM REPLACEMENT.
SSM 46176
Service Bulletin/Repair Instructions
SOME 2016 C-MAX AND FOCUS ELECTRIC VEHICLES MAY EXHIBIT A FALSE ACTIVATION OF THE ALARM SYSTEM. A WORK AROUND UNTIL THE SOFTWARE IS UPDATED(4TH QTR. 2016), PROCEDURE IS AVAILABLE. 1. PUT THE VEHICLE IN PARK. 2. TAKE YOUR FOOT OFF THE BRAKE PEDAL AND KEEP IT OFF. 3. TURN THE VEHICLE OFF (PUSH BUTTON START/STOP. 4.EXIT VEHICLE AND LOCK THE DOORS TO ACTIVATE THE ALARM. NOTE: IF THE BRAKE IS TOUCHED AFTER TURNING THE KEY OFF THEN JUST TURN THE CAR ON AGAIN AND START THIS PROCEDURE AGAIN.
TSB 16-0129
Service Bulletin/Repair Instructions
Some 2011-2016 Fiesta and 2012-2016 Focus vehicles equipped with a DPS6 transmission may exhibit intermittent concerns of loss of transmission engagement while driving, intermittent no start or a loss of power. These symptoms are usually accompanied by an illuminated Check Engine lamp. Additional symptoms may include messages in the message center indicating hill start assist is not available, that parking aid malfunction/service is required or the transmission PRNDL/S gear selector on the instrument cluster may flash. Diagnostic trouble codes (DTCs) U0100, U0101, U1013 and/or P0606 will be present or stored in the powertrain control module (PCM) memory. Follow the Service Procedure steps to correct the condition.
SSM 46048
Service Bulletin/Repair Instructions
Some 2016-2017 Ford and Lincoln vehicles equipped with SYNC 3 may have DTCs U3000:04, B108E:12 and/or U1A00:87 present in the APIM. If these DTCs are present and no other symptoms are reported by the customer, then clear the DTCs and retest. If the DTC(s) do not return then no further repairs should be attempted. If one or more DTCs return as current faults and/or the customer reports other symptoms, then refer to Workshop Manual, Section 415-00 for further diagnostics. The SYNC version can be confirmed via OASIS.
SSM 46032
Service Bulletin/Repair Instructions
SOME 2016 C-MAX AND FOCUS ELECTRIC VEHICLES MAY EXHIBIT A FALSE ACTIVATION OF THE ALARM SYSTEM. A WORK AROUND UNTIL THE SOFTWARE IS UPDATED(4TH QTR. 2016), PROCEDURE IS AVAILABLE. 1. PUT THE VEHICLE IN PARK. 2. TAKE YOUR FOOT OFF THE BRAKE PEDAL AND KEEP IT OFF. 3. TURN THE VEHICLE OFF (PUSH BUTTON START/STOP. 4.EXIT VEHICLE AND LOCK THE DOORS TO ACTIVATE THE ALARM. NOTE: IF THE BRAKE IS TOUCHED AFTER TURNING THE KEY OFF THEN JUST TURN THE CAR ON AGAIN AND START THIS PROCEDURE AGAIN.
TSB16-0109
Service Bulletin/Repair Instructions
SOME 2011-2015 FIESTA VEHICLES BUILT ON OR BEFORE 10/15/2014 AND 2012-2016 FOCUS VEHICLES EQUIPPED WITH A DPS6 AUTOMATIC TRANSMISSION MAY EXHIBIT EXCESSIVE TRANSMISSION CLUTCH SHUDDER ON LIGHT ACCELERATION. SOME VEHICLES MAY OR MAY NOT EXHIBIT TRANSMISSION FLUID LEAKING FROM THE CLUTCH HOUSING. FOLLOW THE SERVICE PROCEDURE STEPS TO CORRECT THE CONDITION.
SSM 45939
Service Bulletin/Repair Instructions
SOME 2016 C-MAX ENERGI AND FOCUS ELECTRIC VEHICLE BUILT ON OR BEFORE 4/18/2016, MAY HAVE 12-VOLT AND/OR HIGH VOLTAGE BATTERY WITH A LOW STATE OF CHARGE AND/OR AN INTERMITTENT BATTERY DRAW. REPROGRAM THE TELEMATICS CONTROL UNIT (TCU) TO THE LATEST CALIBRATION USING IDS RELEASE 101.02 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM. USE CAUSAL PART 14G229 AND 12561D04 LABOR OPERATIONS IN SECTION 10 OF THE SERVICE LABOR TIME STANDARDS (SLTS) MANUAL.
16B10
Service Bulletin/Repair Instructions
In some of the affected vehicles, the front control/display interface module (FCDIM) may have been unintentionally programmed for the European market instead of the North American market
16B02
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
16B02C
Service Bulletin/Repair Instructions
Delivery Hold - Customer Satisfaction Program 16 B02 Certain 2012-2016 Model Years Focus Electric vehicles High voltage Lower battery connector corrosion.