Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SSM 55100
Service Bulletin/Repair Instructions
For Various Ford and Lincoln vehicles, if diagnostics lead to the replacement of the front seat cushion cover J-clips, lower-level service parts are now available. Use service part W709919-S901 if the J-clip is completely detached from the seat cover and W715386-S424 if the clip is still partially attached. It is not necessary to replace the seat cover if only the J-clip is separating from the cover. Refer to PTS Home > Technical Assistance > Technical Support Videos > Section 501- Body and Paint > Seat J-Clips. For claiming, use causal parts from list below and labor operations 63100A and 63100A5. Causal Parts for claiming: Bronco/Bronco Sport/Escape/Explorer/Expedition/Navigator: 7862900 or 7862901 F-150/F-Super Duty: 1562900 or 1562901 Ranger/Maverick: 6062900 or 6062901
SSM 54808
Service Bulletin/Repair Instructions
The instrument panel cluster (IPC) in 2023-2026 Escape and 2025-2026 Maverick hybrid vehicles has a power gauge section on the left side of the display. This power gauge section has a white or gray engine icon that is specifically used to indicate when the vehicle is operating in a specific hybrid mode. The white or gray engine icons are a normal function of the vehicles hybrid display and do not indicate that there is a malfunction and no service actions are necessary to address it. The Owners Manual and Workshop Manual, Section 413-01 > Description and Operation are expected to be updated by the end of Q2 2026.
SSM 54631
Service Bulletin/Repair Instructions
Some 2020-2026 Escape and 2022-2026 Maverick 2.5L Duratec hybrid vehicles may require various repairs on the exhaust system. This may require removal of the exhaust heat exchanger. WSM, Section 309-00 Exhaust System > 2.5L Duratec hybrid > Removal and Installation > Exhaust Heat Exchanger has been revised to eliminate the need to remove the muffler assembly. The procedure steps and labor times have been updated to reflect this adjustment.