511435
Service Bulletin/Repair Instructions
Generic instructions for Xantrex - Freedom X Inverter Configuration "Adjusting Feature Settings in Configuration Model".
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
511435
Generic instructions for Xantrex - Freedom X Inverter Configuration "Adjusting Feature Settings in Configuration Model".
511323
Rear wall backer locations for installation of rear ladders at dealerships.
511213
This is a document that describes how to take the required photos to assess the slideroom mechanism for adjustment and function.
041104
The 42DL model has a potential of the side wall bowing when the sliderooms are in the deployed position. Add decorative gussets per notice.
510692
Per the service bulletin from Dometic ?The nuisance issue enunciates by either blowing the protective fuse, opening the circuit breaker in the furnace circuit, or rendering the furnace inoperative. Our testing has shown that in ALL instances the furnace fails in a safe manner.?
510780
Per the service bulletin from Dometic ?Dometic Corporation has identified a visual cosmetic defect that has occurred on our Dometic DM2652 refrigerators up in the freezer compartment. This does NOT occur on all units, but may be present on units with serial numbers starting with MB between 805xxxxx and 820XXXXX. The visual cosmetic defect in no way affects the performance, operation, safety, or function of the refrigerator and does not represent a non-compliance issue to one or more of the FMVSS standards or result in a risk of personal injury, death, vehicle crash, or property damage.?
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.