061843
Service Bulletin/Repair Instructions
Reference document in the event a dealer needs to inspect an "in wall slide mechanism".
Vehicle report
2021 FOREST RIVER SALEM
Service bulletins
7 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
511435
Service Bulletin/Repair Instructions
Generic instructions for Xantrex - Freedom X Inverter Configuration "Adjusting Feature Settings in Configuration Model".
511377
Service Bulletin/Repair Instructions
As per Lippert Components Technical Service Bulletin 11-004-21. The slide room actuator was assembled incorrectly, which may cause the room to become stuck in the out position and prevent from fully retracting.
511384
Service Bulletin/Repair Instructions
How to change a LCI Schwinteck Slide Mechanism.
831334
Service Bulletin/Repair Instructions
It was discovered that the manufacturing plant did not cut a stress relief line in the upper deck Driver Side and in on certain models, Passenger Side under the slide room(s). The upper deck in the Impression Fifth-Wheel needs to flex, without the "stress relief cut" the sidewall filon may crack under the slide room(s).
511323
Service Bulletin/Repair Instructions
Rear wall backer locations for installation of rear ladders at dealerships.
67A1222
Service Bulletin/Repair Instructions
The thermostat is wired incorrectly at the air conditioning control box located at the ceiling assembly. This condition will cause the fan to not run when using the low setting only. However, the compressor will still run.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.