CXA_10_25_TufTrac M12
Other
CX Advocate for TufTrac M12 Bolts (TSB-32-057-FTL)
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
CXA_10_25_TufTrac M12
CX Advocate for TufTrac M12 Bolts (TSB-32-057-FTL)
TSB32-057-FTL
Technical Service Bulletin for TufTrac M12 Bolts
ICI23-010
Important Campaign Information letter communicating that SF660 Field Service Campaign is Replaced by FL967.
SF660A
Revised Field Service Campaign for Drag Link Tapered Joint
SF660
Field Service Campaign for Drag Link Tapered Joint
SF613
ConMet Front Hub to Rotor Fasteners. On certain vehicles, the front rotor nuts may not be torqued to manufacturer specification. Loose components could cause damage to the ABS tone rings, the ABS sensors, and the anchor plate mounting fasteners.
WI21-009
Warranty Information letter announcing that DTNA is increasing the Standard Diagnostic Times (SDTs) shown. The updated after treatment system (ATS) diesel exhaust fluid (DEF) pump times will be applied to repair orders opened on or after April 12, 2021.
WI21-008
Warranty Information Letter announcing DTNA is adjusting the Standard Repair Times (SRTs) shown. The updated times will be applied to repair orders opened on or after April 5, 2021.
SB35-036
Revised Freightliner Service Bulletin for Axle Flange Gasket Replaced with O-Ring. Revision removed steps instructing removal and installation of wheels. Daimler Trucks North America has released a new axle shaft to hub rubber O-ring (part number 11-30728-000) as a replacement for the paper gasket (part number 11-14418-000). The new O-ring will provide better sealing and is reusable. It is quicker and easier to use compared to the paper gasket, because using a paper gasket requires cleaning the hub when the axle shaft is removed.
SB60-171
Service Bulletin for Guidelines for Cleaning and Disinfecting Cab Surfaces. The following guidelines are for cleaning and disinfecting commonly touched surfaces on the inside and outside of a vehicle. For best results, follow cleaning and disinfecting procedures fully and consistently. Ensure there is adequate ventilation when using chemicals. NOTICE: Wipe down fragile components carefully to avoid damaging the vehicle.
D20M3
Detroit Field Service campaign for DETROIT Export DD15 and DD13 Valve Lash Adjustment, Throttle Connector O-ring, and TC Air Line Spacer Installation.
SS1033638
SS 1033638 - Power Window Express Down Module Discontinued
SS1032974
SS 1032974 High Oil Pressure on 2017 DTNA Vehicles Instrument Cluster Display
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.