26-01-073G DCS
Warranty Program/Extension
Certain G70 (IK) vehicles may develop brake disc surface rust due to extended storage prior to delivery. This condition may affect braking smoothness or generate minor noise.
Vehicle report
2025 GENESIS G70
Service bulletins
21 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
26-01-073G TSB
Warranty Program/Extension
Certain G70 (IK) vehicles may develop brake disc surface rust due to extended storage prior to delivery. This condition may affect braking smoothness or generate minor noise. This bulletin provides instructions to perform brake disc burnishing or machining on the affected front and/or rear brakes as necessary, to restore proper braking performance.
26-BE-016G TSB
Service Bulletin/Repair Instructions
Some G70 (IK) vehicles may exhibit a false notification from the front Parking Distance Warning (PDW) sensors when there is no object nearby. This may occur when the parts housing the sensor become loose, causing the sensor to falsely detect objects. There is no functional effect on the vehicle other than the false notification. This bulletin provides the procedure to inspect the vehicle and apply repair(s) as needed.
26-GI-002G TSB
Service Bulletin/Repair Instructions
This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
DTN DCS
Other
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
DTN DL
Other
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
26-AD-001G
Service Bulletin/Repair Instructions
Some 2020MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
25-BD-012H TSB
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-BE-020G TSB
Service Bulletin/Repair Instructions
This bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
25-HA-002G TSB
Service Bulletin/Repair Instructions
Certain Genesis vehicles may experience insufficient cooling in the cabin due to leakage at the evaporator core. This bulletin provides instructions to inspect the A/C system for leaks and replace the evaporator core, if necessary.
25-01-046G
Service Campaign
Certain G70 (IK) vehicles may exhibit communication issues with the Blind-Spot Collision Warning System caused by the Rear Corner Radar units. This bulletin contains instructions on replacing the Rear Corner Radar units (LH/RH), performing radar calibration, and variant coding.
25-BD-001G-1 TSB
Service Bulletin/Repair Instructions
This bulletin provides repair information for the dark chrome trim when stains are present. Some stains may occur from hard water or cleaning chemicals used during a car wash. Follow the procedures below to replace the affected dark chrome moldings.
25-BE-002G TSB
Service Bulletin/Repair Instructions
This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater and updated by USB. The NAU website is https://update.genesis.com/US/EN/navigationUpdate. For certain models equipped with a relevant Genesis Connected Services (GCS) package, the software may be downloaded and applied via OTA update.
25-01-024G-1 TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection by resetting the AVN unit.
25-GI-009G
Service Bulletin/Repair Instructions
Certain Genesis vehicles may experience an inoperable horn from moisture or carbonization at the contact point. This bulletin provides a guide to inspect and replace the horns.
25-01-024G EM
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Genesis Connected Service functions. This may be due to an irregular disconnection on Verizon's communication network.
25-01-024G TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Services functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection by resetting the AVN unit.
25-BD-001G TSB
Service Bulletin/Repair Instructions
This procedure provides repair information for the dark chrome trim when stains are present. Some stains may occur from hard water or cleaning chemicals used during a car wash. Follow the procedures below to replace the affected dark chrome moldings.
24-01-061G-1
Service Campaign
This bulletin describes the procedure to inspect and replace the rear combination lamp garnishes that may begin to detach from the vehicle. The inspection and repair procedure involves confirming if the garnishes have separated and if necessary, removing the garnish and replacing with new parts.
24-DS-003G
Service Bulletin/Repair Instructions
This bulletin provides information to inspect and replace the front or rear wheel bearing hub assemblies for all Genesis vehicles. This procedure is applicable when noise (whirring, roaring, grinding, rumbling, etc.) is present which gets louder when driving with more speed.
24-01-061G
Service Bulletin/Repair Instructions
This bulletin describes the procedure to inspect and replace the rear combination lamp garnishes that may begin to detach from the vehicle. The inspection and repair procedure involves confirming if the garnishes have separated and if necessary, removing the garnish and replacing with new parts.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.