17-NA-073
Service Bulletin/Repair Instructions
This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
Vehicle report
1999 GMC BLAZER
Service bulletins
13 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
16NA260
Service Bulletin/Repair Instructions
THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPROGRAM THE MEDIA DISC PLAYER WITH THE LATEST CALIBRATIONS TO CORRECT A CONDITION OF THE REAR ENTERTAINMENT SYSTEM NOT OPERATING AS INTENDED IN COLDER AMBIENT TEMPERATURE AREAS DUE TO CALIBRATION CONCERNS.
Recalls
Service Bulletin/Repair Instructions
Vehicle Recalls
99-08-51-007F
Service Bulletin/Repair Instructions
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
PI0281D
Service Bulletin/Repair Instructions
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
130089009
Service Bulletin/Repair Instructions
Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
SB-06-02-32-013B
Service Bulletin/Repair Instructions
SAAB/HUMMER/GM: DIAGNOSTIC TIPS/RECOMMENDATIONS WHEN POWER STEERING PUMP REPLACEMENT IS NECESSARY. ANALYSIS OF RETURNED POWER STEERING (PS) PUMPS THAT HAD BEEN REPLACED FOR NOISE, NO POWER ASSIST, NO OR LOW PRESSURE AND LEAKING CONDITIONS HAS INDICATED A HIGH NUMBER OF NO TROUBLE FOUND RESULTS. ALL 1997-2010 VEHICLES AND LIGHT TRUCKS; 2010 AND PRIOR HUMMERS H2/H3 AND SAAB 9-7X VEHICLES. *PE
01225
Service Bulletin/Repair Instructions
ENGINE COOLANT LEAK AT INTAKE GASKET. * MJ
010866011
Service Bulletin/Repair Instructions
SUBJECT REGARDING REAR ROOF PERFORATION (INSTALL NEW REAR ROOF SECTION) INCLUDING 1995-1997 GMC BLAZER.*JG
181000
Service Bulletin/Repair Instructions
BRIEF INFORMATION ON DIAGNOSING EASY ENTRY SEAT NO LOCK CONDITIONS TO MAKE SURE THE SEAT TRACKS ARE TIMED. *TT
990421003
Service Bulletin/Repair Instructions
SOME OWNERS MAY COMMENT ABOUT A SLIPPING TYPE CONDITION AT THE FRONT WHEELS WHILE THE VEHICLE IS IN FOUR WHEEL DRIVE (4WD). *TT
990844002
Service Bulletin/Repair Instructions
SOME CUSTOMERS MAY COMMENT THAT THE CD CHANGER WILL NOT RELEASE WHEN DEPRESSING THE EJECT BUTTON. *TT
3300
Service Bulletin/Repair Instructions
4WD MODELS WITH NOISE, VIBRATION ON DRY PAVEMENT. *EH
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.