Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
M1490
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1490 (V 26.8.3): DIGITAL TECHNICIAN II - UPDATES AND RELEASE NOTES. PURPOSE: Revision. This bulletin informs dealers that Harley-Davidson has made a software update to Digital Technician II (DT II). DIGITAL TECHNICIAN II (PART NUMBER: HD-48650). Version Version 26.8.3, Release Date: Week of July 24, 2026. NOTE: Software version (26.4.3) will need to be manually installed only if current software version of DT II is (26.0.2). After (26.4.3) is manually installed, automatic updates will bring DT II to the latest software version. Refer to bulletin M1713 for instructions. New Features - Harley-Davidson: 2023-2024 Touring: Updated Electronic Control Module (ECM) calibration offerings. LiveWire: S2DM/MH/AP: Calibration bundle 10.2.28: Telematic Control Unit (TCU) reflash updates. Change: Vehicle Setup: Body Control Module (BCM) – Tire Pressure Monitoring System (TPMS) Replacement: Correct issue where tire size selections were not available. System Info – Auxiliary Load Controller (ALC): Added Bike configuration field. Data Items – Trike ECM: Improved display of Gear Position when in reverse. Amp – Added support for (Part No. 76001619).
M1727
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1727: BIG TWIN INNER PRIMARY SEAL CHANGES. PURPOSE: Initial release. This bulletin informs dealers of changes to the Inner Primary Seal (Part No. 12052). The seal part number was changed from (Part No. 12052A, black in color) to (Part No. 12052B, brown in color). A new Inner Primary Seal (Part No. 12052C) has been released and the color has been changed back to black.
M1679
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1679: AFTERMARKET EXHAUST HEADER DEBRIS. PURPOSE: Initial release. This bulletin informs dealers that Harley-Davidson has identified instances of premature engine failure due to abrasive particle wear, specifically from debris inside new aftermarket exhaust headers. Recent evaluations have identified that certain newly manufactured exhaust headers may contain residual hard particles that, if not removed prior to installation, can migrate through the engine system and cause accelerated component wear or severe mechanical damage.
M1713
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1713 (REV C): DTII UPDATE PROCEDURE FOR SOFTWARE VERSION (26.4.3). PURPOSE: Revision C. This bulletin informs dealers that an issue was discovered in the Digital Technician II (DT II) software version (26.0.2), released on November 18, 2025. The issue prevents automatic software updates to be installed on your DT II computer. A manual installation of the latest DT II software version (26.4.3) will need to be performed if current DT II software version is (26.0.2), to allow future automatic updates. If a manual update to (26.1.5) or (26.3.2) has previously been completed, DT II will automatically update to (26.4.3) and no additional action is needed.. Revision C. Updated: Purpose for Service Bulletin and Required Dealer Action. Updated to Software Version (26.4.3).
M1391A
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1391A (REVU): MIDTRONICS GRX-3110 AND DCA-8000 SOFTWARE. PURPORSE: Revision U. The purpose of this bulletin is to inform the dealer network that a software update to the GRX-3110 and DCA-8000 is now available. DYNAMIC DIAGNOSTIC CHARGER SYSTEM (PART NUMBER: DCA-8000). [Rev U] Added: Description of improvements made to the testing algorithm for GRX software Version P and DCA-8000 software Version E.
PAB1171
Service Bulletin/Repair Instructions
GENUINE MOTOR PARTS AND ACCESSORIES BULLETIN PAB1171 (REV B): SOFTWARE UPDATE FOR SCREAMIN EAGLE PRO STREET TUNER. PURPOSE: Revision B. Updated: Summary. The App has returned to the Apple App Store. This bulletin informs dealers that a recent software update to the Screamin' Eagle Pro Street Tuner application will require the use of a Personal Computer (PC) to complete a Bluetooth Communication Interface (BCI) firmware update.
M1684
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1684: MARKET SPECIFIC BATTERY INTRODUCTION. PURPOSE: Initial Release. This bulletin informs dealers of the availability of new batteries for new Original Equipment (OE) vehicle production and in the Parts and Accessories (P&A) catalog. Availability of the new Absorbed Glass Mat (AGM) batteries will vary by market and will be transitioning over the next few months. NOTE: The ring terminal screws are not compatible between Leoch and East Penn batteries. The new batteries will include new ring terminal screws, which must be used. The ring terminal screws from the old battery need to be discarded.
M1650
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1650: MILWAUKEE EIGHT AND TWIN CAM CAMSHAFT DRIVE GEAR RETENTION KIT CHANGES. PURPOSE: This bulletin informs dealers that changes have been made to the Camshaft Drive Gear Retention Kit and service proceduresfor the Milwaukee-Eight and Twin Cam applications. In an effort to increase the clamp load of the camshaft drive sprocket bolted joint and prevent the drive bolt from loosening in high lift camshaft applications, the following changes have been made: a. The camshaft drive bolt final torque has been increased to 40 ft-lbs (54 N·m) for all Milwaukee-Eight and certain Twin Cams models. See Vehicles Affected. This increase in torque will make the bolt a one time use application. Never re-use a camshaft drive bolt for service after tightening to the increased specification. See service manual for updated procedure. b. A new camshaft drive gear retention kit (Part No. 91800088) has been created. This new kit is compatible with all Milwaukee-Eight and Twin Cam engines using Parts and Accessories (P&A) camshaft and Original Equipment (OE) camshaft applications. See Instruction sheet for specific fitment on Twin Cam OE camshaft applications. The new kit utilizes friction washers to prevent unwanted rotation of components in the drive sprocket bolted joint under stress. The use of liquid threadlocker on the threads of the bolt and pre-lube to the head of the bolt flange and outside of the washer help the bolt reach full stretch when tightening. NOTE: Engines produced at all Harley-Davidson Motor Company (HDMC) plants will not come with the new kits installed. They will continue to be produced with (Part No. 25566-06).
M1555
Warranty Program/Extension
SERVICE BULLETIN M1555 (REV E): BATTERY WARRANTY GUIDELINES. PURPOSE: Revision E. Added: Added procedures for the DCA-8000 E Battery Tester.* Updated: All sections. This bulletin informs the dealership network that Harley-Davidson has provided guidelines for battery warranty.
PAB1158
Service Bulletin/Repair Instructions
GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1158: OIL FILTER PACKAGING AND CASE QUANTITY UPDATE. PURPOSE: To inform dealerships that Harley-Davidson has made updates to oil filters including new part numbers, packaging design, and bulk case quantity changes.
M1612
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1612 (REV A): MILWAUKEE-EIGHT AND TWIN CAM TRANSMISSION GEAR PACKS. Purpose: Revision. Update: Notes for Table 3 and 4. * Updated: Part Numbers. This bulletin informs dealers that all: Twin Cam gear packs on CVO, Dyna, Police, Softail, Touring & Trike models and Milwaukee-Eight gear packs on CVO, Police, Softail, Touring & Trike models ordered after December 04, 2023 will not come with the shift drum, forks, shafts and related hardware. Models Affected: 2006-2017 Twin Cams: Dyna models 2007-2016 Twin Cams: CVO, Police, Touring and Trike models 2007-2017 Twin Cams: Softail models 2017-2024 Milwaukee-Eight: CVO, Police, Touring and Trike models 2018-2024 Milwaukee-Eight: Softail models
PAB1146
Service Bulletin/Repair Instructions
GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1146: 68193-95 BULB WEDGE, FENDER TIP LAMP. Purpose: To inform dealers of an issue with the bulb wire terminals not being to specification. The light bulbs were used in numerous front and rear fender tip light assemblies for domestic and international applications.
TA0016
Service Bulletin/Repair Instructions
TECHNICAL TIP BULLETIN TA0016: 2014 and Later Touring Steering Head Bearing Adjustment. PURPOSE: REVISION. Updated: 2014-2019 to 2014 and later Touring vehicles, and VEHICLES AFFECTED. Harley-Davidson motorcycles are designed, manufactured and tested to be operated with both of the riderâs hands on the handlebar. If you or a customer are experiencing a handling concern, refer to the TROUBLESHOOTING, HANDLING, IRREGULARITIES found in the MAINTAINANCE chapter of the appropriate service manual. The service manual process is not intended to validate factory settings, but rather to be used if a concern is presented. Through extensive testing, Harley-Davidson has developed the service manual specification and adjustment procedure as the optimum steering head bearing adjustment and verification method to achieve the desired handling characteristics across all speeds and conditions. Addressing a perceived feel of low speed wobble, oscillation or free play by adjusting the steering head bearings beyond the service manual specification may have an adverse effect on motorcycle stability.
M1464
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1464: BOOM! AUDIO - GENERAL INFORMATION AND SOFTWARE UPDATE 1.22.X. PURPOSE: Revision. This bulletin helps the dealer locate needed information to update and service Boom! Box Audio Infotainment systems. It also lists software revisions and the fixes addressed in each revision. This bulletin also replaces the following documents: TT431A: Software Download and Warranty Information, M1346: Boom! Box Audio System Software Update, M1344E: Boom! Box Infotainment System General Information and Procedures, M1442: Box Infotainment System General Information and Software Release 1.21.X Description, and The Boom! Box Infotainment System Job Aid located on h-dnet.com
TT413
Service Bulletin/Repair Instructions
TECHNICAL TIP BULLETIN TT413: 2009 - 2020 TOURING REAR FORK RUSTY WATER LEAKAGE. PURPOSE: Revision. Some 2009 - 2020 Touring, Touring CVO, Touring Police models exhibit drainage of rusty water from the rear fork (where the debris deflector mounts), which has raised customer concern. Updated Model Years. NOTE: This is a cosmetic concern and not an indication of an internal issue.
PAB1097
Service Bulletin/Repair Instructions
GENUINE MOTOR PARTS AND MOTOR ACCESSORIES BULLETIN PAB1097 INTERNATIONAL FITMENT: THE BOOM! BOX GTS SOFTWARE UPDATE. PURPOSE: To notify International dealers that International GTS radios are now available to be ordered and installed in 2014-2018 Touring, CVO Touring and Trike models previously equipped with 6.5 GT radios as retrofittable with additional parts and software as noted. Markets Affected: Only international markets are affected.
M1492
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1492: 2017 - 2019 TOURING - MILWAUKEE EIGHT - INNER PRIMARY VENT. Purpose: Revision. Harley-Davidson has learned that a small percentage of dealers and customers are finding low transmission oil levels and high primary oil levels during normal maintenance intervals. This could indicate that oil is transferring from the transmission case to the primary housing through the transmission mainshaft. A inner primary vent service kit (Part No. 26500027) is now available to address this issue. The kit allows the primary to breath and prevents excessive pressure. All markets are affected.
M1476
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1476: 2014 - 2016 TWIN-COOLED COOLANT PUMP REPLACEMENT. Revision: Added Dealer inventory instructions. Purpose for Service Bulletin: To inform dealers of a new coolant pump replacement kit for 2014 - 2016 Twin Cooled vehicles. Markets Affected: All markets are affected.
M1450
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1450: MILWAUKEE-EIGHT EQUIPPED VEHICLES - LOSS OF POWER OR HIGH ENGINE BRAKING. REVISION. Purpose: 2017 - 2019 model motorcycles equipped with a Milwaukee-Eight? engine can experience a condition known as sumping during extended periods at high rpm or under heavy engine load. Sumping is when an excessive amount of oil is suspended in the engine crankcase and the flywheel must travel through the oil, resulting in loss of power or a high degree of engine braking and potential engine component damage with extended use under these conditions. This bulletin provides the diagnostic procedure for determining if sumping is occurring.
1HDS2L3U02
Service Bulletin/Repair Instructions
TECH ARTICLE TA0016: 2014 and Later Touring Steering Head Bearing Adjustment. Purpose: During recent dealer visits to observe steering head bearing adjustment process, Harley-Davidson staff observed that some dealers are not correctly following the service manual steering head bearing adjustment process. Issue: Steering head bearings on 2014 and later Touring, CVO Touring and Police Touring motorcycles which may not have been adjusted correctly using the service manual procedure at dealerships. Resolution: Never make adjustments by feel. Always follow the process in the appropriate service manual.
1HDM5V2A05
Service Bulletin/Repair Instructions
TECH ARTICLE TA0023: TA0023: Crankshaft Rod Bearing. Purpose: Technicians have been falsely identifying connecting rod bearings as failed due to a perception of resistance as the rods are rotated. The clearance of the Twin Cam and Milwaukee-Eight® crank pin bearings are maintained to a very tight range. This optimizes performance and maintains low mechanical noise in operation. The connecting rod bore can also distort slightly in operation due to stress relaxation. As a result, bearing clearance decreases due to the contact zone broadening and the load being distributed over more rollers. The combination of a bore being slightly out of round and reduced bearing clearance can result in varying degrees of resistance through the range of motion. Axial clearance is also tightly controlled for proper alignment. For these reasons, zones of resistance can be found when the connecting rods are rotated by hand through their range of motion. Resistance during rod motion, by itself, is not an indication of a performance or durability concern.
M1416
Service Bulletin/Repair Instructions
The purpose of this service bulletin is to communicate updates and corrections to certain 2008-2016 service literature.
1HD-Q2X5R-12
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1426D: SAFETY RECALL CODE 0169 - 2016 BLACK CLUTCH MASTER CYLINDER (REVISION). Reason for Revision: Due to improved kit availability, and for customer and dealer convenience, the "Quarantine and Inspection" process has been removed for all remaining vehicles affected by Safety Recall 0169. All remaining 0169 repairs can proceed directly to the "Wash and Rebuild" process. See Required Dealer Action. Original bulletin release date was July 11, 2016.
1HDB6S5W11
Service Bulletin/Repair Instructions
TECH ARTICLE TTA0016: 2014 and Later Touring Steering Head Bearing Adjustment. Revised. Issue: Steering head bearings on 2014 and later Touring, CVO Touring and Police Touring motorcycles which may not have been adjusted correctly using the service manual procedure at dealerships. Resolution: NOTE - Never make adjustments by feel. Always follow the process in the appropriate service manual. When submitting warranty claim information for steer head bearing adjustment, Harley-Davidson requires the following data: 1) What was the original steering head bearing swing back result found on the vehicle? (see service manual), 2) What was the swing back result after the steering head bearing adjustment was performed? (see service manual).
1HDS3A5B11
Service Bulletin/Repair Instructions
TECH TIP CRUISE CONTROL AND PTT BUTTON CONFIGURATION USING DIGITAL TECHNICIAN II. Issue: Some CB (Citizens band) radio equipped Touring model customers have expressed concern about manipulating the PTT (Push to talk) button on the right hand control, while operating the throttle control. Symptom: Rider's comfort. Resolution: To address this concern, a new feature is included in DIGITAL TECHNICIAN II (PART NUMBER: HD-48650) software version 11.0 that allows the configuration of the PTT and cruise control buttons to be interchanged. This will allow CB radio customers the option to move PTT function to the LHCM (Left hand control module) and the cruise control function to the RHCM (Right hand control module). If a customer requests this change in configuration, the kit in Table 1 must be installed. These buttons are gray to visually differentiate them from the OE (Original equipment) buttons.
1HDV7W6E11
Service Bulletin/Repair Instructions
TECH ARTICLE TA0022: Transmission to Primary Oil Transfer. During service intervals, customers or dealers may find oil level in the primary above the clutch cover opening. This also is accompanied by low transmission oil level. 2014 - 2016 Vehicles:For Twin-Cam models, replace the oil seal (Part No. 12068) and sprocket shaft spacer (Part No. 24009-06). 2017 and Later Vehicles: Check the primary and transmission oil levels and adjust the oil volumes as needed. Verify oil levels again in 1,600 km (1,000 mi).
1HDG3S9W10
Service Bulletin/Repair Instructions
SERVICE BULLETIN M1442: BOOM! BOX INFOTAINMENT SYSTEM GENERAL INFORMATION AND SOFTWARE RELEASE 1.21.X DESCRIPTION. This bulletin helps the dealer locate needed information to update and service Boom! Box Audio Infotainment systems. It also lists software revisions and the fixes addressed in each revision.
1HD-R7V8M-09
Service Bulletin/Repair Instructions
PARTS & ACCESSORIES BULLETIN PAB1067: SCREAMIN? EAGLE SMART TUNE PRO RELEASED FOR SHIPMENT. Purpose is to notify dealers that the Smart Tune PRO ? Automatic Tuning Module is 50-state U.S. EPA approved and released for shipment.
1HD-F6Q5V-04
Service Bulletin/Repair Instructions
Technical Article TA0016: MY14-17 Touring and CVO Touring Vehicles with fork mounted fairings; Steering head bearings on 2014 and later Touring and CVO Touring motorcycles which may not have been adjusted correctly using the service manual procedure at dealerships. During recent dealer visits to observe steering head bearing adjustment process, Harley-Davidson staff observed that some dealers are not correctly following the service manual steering head bearing adjustment process. Harley-Davidson motorcycles are designed, manufactured and tested to be operated with both of the rider?s hands on the handlebar. If you or a customer are experiencing a handling concern, refer to the TROUBLESHOOTING, HANDLING, IRREGULARITIES found in the MAINTAINANCE chapter of the appropriate service manual.
1HD-H9M2Q-03
Service Bulletin/Repair Instructions
Phone Campaign. MY16 Touring Clutch Master Cylinder Part Return from dealers for inspection.
1HD-Y6J2F-02
Service Bulletin/Repair Instructions
TECH ARTICLES: INSTALLATION OF BOOM! INFOTAINMENT SOFTWARE RELEASE 1.20.2 MAY CAUSE THE INFOTAINMENT SYSTEM TO FREEZE AND BECOME NON-RESPONSIVE TO INPUTS FROM THE HAND CONTROLS, SOFT KEYS, OR TOUCH SCREEN. AN IGNITION CYCLE OFF-ON MAY GET THE SYSTEM TO RESPOND OR IT MAY NOT. IF A CUSTOMER IS EXPERIENCING THIS ISSUE, UPDATE SOFTWARE TO RELEASE 1.20.3.
1HD-Q4H7G-02
Service Bulletin/Repair Instructions
Service Bulletin M1430B: BOOM! BOX INFOTAINMENT SYSTEM GENERAL INFORMATION AND SOFTWARE RELEASE 1.20.X DESCRIPTION informs the dealer network that Boom! software version 1.20.3 released December 19, 2016 and is now available to download. This also provides notice that revision 1.20.2 was found to be corrupt. Do not install version 1.20.2 and delete any stored copies.
1HD-K5W9P-01
Service Bulletin/Repair Instructions
THIS BULLETIN HELPS THE DEALER LOCATE NEEDED INFORMATION TO UPDATE AND SERVICE BOOM! BOX AUDIO INFOTAINMENT SYSTEMS. IT ALSO LISTS SOFTWARE REVISIONS AND THE FIXES ADDRESSED IN EACH REVISION.
1HD-J3E4M-01
Service Bulletin/Repair Instructions
DUE TO IMPROVED KIT AVAILABILITY, AND FOR CUSTOMER AND DEALER CONVENIENCE, THE QUARANTINE AND INSPECTION PROCESS HAS BEEN REMOVED FOR ALL REMAINING VEHICLES AFFECTED BY SAFETY RECALL 0169. ALL REMAINING 0169 REPAIRS CAN PROCEED DIRECTLY TO THE WASH AND REBUILD PROCESS. SEE REQUIRED DEALER ACTION. ORIGINAL BULLETIN RELEASE DATE WAS JULY 11, 2016.
TA0006
Service Bulletin/Repair Instructions
Harley-Davidson is aware of conditions that may result in a streaking appearance or film residue on the inside of some instrument gauges including speedometer and tachometers. This may occur after exposure of the vehicle to humid conditions. This condition may remain even after the moisture has evaporated.
M1409A
Service Bulletin/Repair Instructions
This bulletin is to inform dealers of the steps to perform after performing the Touring and Trike Rear Shock absorber callback return. The shipping plug must be transferred from the new shock to the return shock. When oil is allowed to leak during the return process, the call-back issue cannot be properly diagnosed. Installing the plug in the return shock contains the oil in the shock during the shipment to the supplier. This information applies to 2014-2016 Touring and Trike models with rear air shock absorbers.