167-T2406-1
Service Bulletin/Repair Instructions
After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
Vehicle report
2007 HINO CONVENTIONAL MODELS
Service bulletins
29 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
167-T2406-2
Service Bulletin/Repair Instructions
This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
167-T1910-01
Service Bulletin/Repair Instructions
This design change of the idler gear case and idler gear bolt is to address the idler gear bolt loosening under abnormal loading from fuel supply pump and the gear train. The redesigned idler gear case and idler gear bolt are designed to increase their robustness and prevent the idler gear bolt from loosening.
Floor Mats Flyer
Service Bulletin/Repair Instructions
Floor mats sale for Hino Conventional (MY 2005-2017) & COE (My 2012-2017)
TT-16-010
Service Bulletin/Repair Instructions
Suspension - Air spring shield - Conventional Trucks equipped with a Comfort Ride rear air suspension.
PA-2016-022
Service Bulletin/Repair Instructions
BOSTROM - LTSS (LIGHT TRUCK SUSPENSION SEAT) DESIGNED TO FIT THE HINO 155 & 195 COE ? Proven to reduce vibration to the occupant compared to the conventional static seat = LESS FATIGUE ? The suspension system can easily be adjusted to the weight of the driver
PA-2016-002
Service Bulletin/Repair Instructions
Hino Trucks floor mats. Black durable rubber floor mats with the red Hino Trucks emblem. Easy to shake out the dirt and debris or clean it with soapy water.
TT-15-024
Service Bulletin/Repair Instructions
2005-07 Conventional Light Duty Truck (LDT) with a J05E engine. During engine performance diagnostics, comparative readings from a like engine can be useful data points from a known good engine to use for comparisons (refer data in PDF documents).
SB-15-009
Service Bulletin/Repair Instructions
Fluid Leak from Allison Housing Breather in Cold Conditions at Startup. This bulletin provides the corrective action for a fluid overflow condition from the main housing breather at startup in cold ambient temperatures at or below +5f (-15c). 2005-2008 model year Hino Conventional trucks equipped with Allison 1000 or 2000 family series automatic transmissions.
TT-14-033
Service Bulletin/Repair Instructions
When replacing an engine block with service part no., 11401E0380 there is potential that 2 rear oil passage plugs may be missing in the rear of the replacement engine block. In the event your replacement engine block does not have these 2 oil passage plugs, you will need to install them before proceeding
SB-14-019
Service Bulletin/Repair Instructions
In the event that one of the subject vehicles is driven while the ABS warning lamp is illuminated, operation of the torque converter clutch will be suspended. Driving the vehicle with an ABS warning lamp illuminated can lead to overheating of the transmission fluid due to the torque converter clutch not functioning. A jumper harness has been made available that will allow operation of the torque converter clutch in the event that the vehicle is driven while the ABS warning lamp is illuminated.
SB-14-003
Service Bulletin/Repair Instructions
The following is to inform you of the revision of the inspection procedure for the DTC?s P0340 and P0341. You are kindly requested to attach this service data to the relevant pages of the workshop manuals for maintenance and to use for servicing.
09-005
Service Bulletin/Repair Instructions
ABS light on and Trans Shifts Erratically.
LT-0010
Service Bulletin/Repair Instructions
Hino Quick Reference Guide 2005-2010 Model Years
LT-0013
Service Bulletin/Repair Instructions
Napschart
08-004
Service Bulletin/Repair Instructions
ECU File Downloading, Reprogramming and INF File Uploading via HinoNet
08-003
Service Bulletin/Repair Instructions
INJECTOR CLAMP BOLT TIGHTENING TORQUE AND PROCEDURE
08-001
Service Bulletin/Repair Instructions
DAVCO FUEL FILTER CHANGE AND PRIMING PROCEDURE
SB -07-006
Service Bulletin/Repair Instructions
This bulletin provides diagnostic information for monitoring the engine running data to determine if the Suction Control Valve is defective, and a service procedure for replacing the Suction Control Valve when necessary. The SCV should be tested and replaced when necessary before replacing the supply pump assembly for a fuel pressure related concern.
PTB-01-08
Service Bulletin/Repair Instructions
Complete Engine Assembly Part Numbers
Exchange Turbo A
Service Bulletin/Repair Instructions
Introduction of Exchange Turbocharger Program
07-003
Service Bulletin/Repair Instructions
The information applies to the installation of a customer supplied and commercially available Electric Trailer Brake Controller for all 2007-2008 Hino trucks.
06-012
Service Bulletin/Repair Instructions
Rear Axle gear ratio change or change in tire size
Lock Assembly Ki
Service Bulletin/Repair Instructions
Lock Assembly Kit (Keyed Alike)
SB 07-001
Service Bulletin/Repair Instructions
The document is to inform the dealers about the design change in the aligning marks on the flywheel.
TB-001-07
Service Bulletin/Repair Instructions
Racor and Davco - Fuel/Water Seperators
06-011
Service Bulletin/Repair Instructions
Fuel diluting engine oil
SB 05-004
Service Bulletin/Repair Instructions
This document is to inform of the procedure to calibrate the Pulse Adjust Module when needed (ex. tire size change, rear carrier ratio change) .
SB-05-006
Service Bulletin/Repair Instructions
This document is to inform of the following information regarding the replacement and installation of the Aisin 450-43 LE Automatic Transmissions.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.