Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
HTB2604
Service Bulletin/Repair Instructions
KTM AG concluded the recall of Continental TKC80 tire replacement (HTB2207 - 09_2044774) on April 2nd, 2026. All customers who have not yet had this recall carried out can therefore contact the Continental customer relations line directly. Consumer/motorcycle owner calls Continental customer relations line 1-800-847-3349 Continental Customer Relations will analyze case by case and if an existing recall tire is identified, the subject tire(s) will be collected for physical inspection and final disposure in the Continental Service Center. Once subject recall tire(s) pass physical inspection and is/are accepted, the consumer will receive a reimbursement FROM CONTINENTAL based on the remaining tread depth (pro-rata reimbursement). For tire(s) rejected during inspection, the consumer/motorcycle owner will be informed, and no further actions will take place. Note: Please be aware that it is not possible for Continental to reimburse a dealer or distributor. Reimbursements are exclusive to end-consumers/motorcycle owners.
HTB2207
Service Bulletin/Repair Instructions
Continental Tire the Americas, LLC (CTA) has determined that certain TKC 80 tires fail to conform to Federal Motor Vehicle Safety Standard No. 119, "New pneumatic tires - other than passenger cars." CTA has initiated a tire safety recall to remove these tires from service. The Husqvarna motorcycle models listed above were originally equipped with TKC 80 brand tires. CTA has determined that groove cracks in the tread rubber developed during internal testing. Groove cracking may appear during the tire service life and can lead to tread separation, increasing the risk of a crash. On the specified 701 Enduro Models listed above only the originally equipped TKC 80 front tire is affected and needs replaced. On the specified FE 250, 350, and 501 Models listed above both the originally equipped TKC 80 front and rear tires are affected and need replaced. Customers that still have originally equipped TKC 80 tires mounted on their motorcycle are eligible to have the recall tire replacement performed by an authorized Husqvarna Motorcycles dealer.
HTB2110
Service Bulletin/Repair Instructions
Husqvarna Motorcycles North America, Inc. has determined that a defect which relates to motor vehicle safety exists with certain 2018, 2019 and 2020 motorcycles listed above pertaining to the clutch slave cylinder. On affected motorcycles there is a possibility that the bellow style gasket can be damaged caused by deviations during assembly. Damage to the bellow gasket may affect the function of the clutch slave cylinder. This could result in the rider noticing a change in shifting behavior and the clutch becoming inoperable to the point where the clutch will not disengage when the clutch lever is pulled in. To ensure the highest level of safety, performance, reliability and customer satisfaction, it is necessary to replace the clutch slave cylinder on all affected motorcycles that have a bellow style gasket clutch slave cylinder mounted (Fig. 1).
HTB2105
Service Bulletin/Repair Instructions
Husqvarna Motorcycles North America, Inc. has decided that a defect which relates to motor vehicle safety exists with the 2020 701 Enduro LR where abrasion may occur on both fuel lines located on the front fuel tank. To ensure the highest level of safety, performance, reliability and customer satisfaction, it is necessary to install two newly designed fuel lines with an additional clamp that position the fuel lines away from the contact points on the front fuel tank that could cause abrasion.