Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
HTB2608
Service Bulletin/Repair Instructions
Husqvarna Mobility North America, Inc. has determined that a defect which relates to motor vehicle safety exists with certain model motorcycles listed above. During backwards rolling, the rear brake caliper may crack near the primary pin casting, which may cause the caliper to break when riding. Cracks or breaks in the rear brake caliper can reduce braking ability, increasing the risk of a crash. To remedy this defect, the rear brake caliper including the caliper bracket must be replaced on all affected motorcycles.
HTB2604
Service Bulletin/Repair Instructions
KTM AG concluded the recall of Continental TKC80 tire replacement (HTB2207 - 09_2044774) on April 2nd, 2026. All customers who have not yet had this recall carried out can therefore contact the Continental customer relations line directly. Consumer/motorcycle owner calls Continental customer relations line 1-800-847-3349 Continental Customer Relations will analyze case by case and if an existing recall tire is identified, the subject tire(s) will be collected for physical inspection and final disposure in the Continental Service Center. Once subject recall tire(s) pass physical inspection and is/are accepted, the consumer will receive a reimbursement FROM CONTINENTAL based on the remaining tread depth (pro-rata reimbursement). For tire(s) rejected during inspection, the consumer/motorcycle owner will be informed, and no further actions will take place. Note: Please be aware that it is not possible for Continental to reimburse a dealer or distributor. Reimbursements are exclusive to end-consumers/motorcycle owners.
HTB2502
Service Bulletin/Repair Instructions
Husqvarna Mobility North America, Inc. has determined that a defect which relates to motor vehicle safety exists with certain 2022, 2023 and 2024 Husqvarna motorcycles equipped with BRAKTEC front brake calipers. Irregularities were found in the casting structure of one of our brake supplier's subcontractors. In the worst case, this can lead to the front brake caliper cracking in the area around the upper guide pin. See Figures 1 and 2. If the front brake caliper cracks at the upper guide pin it may reduce the braking systems effectiveness. For this reason, the manufacturer of the brake caliper casting must be checked on affected vehicles and replaced if necessary. The differentiation between the suppliers of the cast raw parts of affected vehicles can be seen directly on the brake caliper, see Figures 3 and 4.
HTB2207
Service Bulletin/Repair Instructions
Continental Tire the Americas, LLC (CTA) has determined that certain TKC 80 tires fail to conform to Federal Motor Vehicle Safety Standard No. 119, "New pneumatic tires - other than passenger cars." CTA has initiated a tire safety recall to remove these tires from service. The Husqvarna motorcycle models listed above were originally equipped with TKC 80 brand tires. CTA has determined that groove cracks in the tread rubber developed during internal testing. Groove cracking may appear during the tire service life and can lead to tread separation, increasing the risk of a crash. On the specified 701 Enduro Models listed above only the originally equipped TKC 80 front tire is affected and needs replaced. On the specified FE 250, 350, and 501 Models listed above both the originally equipped TKC 80 front and rear tires are affected and need replaced. Customers that still have originally equipped TKC 80 tires mounted on their motorcycle are eligible to have the recall tire replacement performed by an authorized Husqvarna Motorcycles dealer.
HTB2205
Service Bulletin/Repair Instructions
Due to inconsistencies in the assembly of the engine in the model listed above, some screw plugs on ignition covers were not tightened with the specified torque. For this reason, the screw plugs on affected motorcycles must be inspected for the correct torque.