Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
HTB2110
Service Bulletin/Repair Instructions
Husqvarna Motorcycles North America, Inc. has determined that a defect which relates to motor vehicle safety exists with certain 2018, 2019 and 2020 motorcycles listed above pertaining to the clutch slave cylinder. On affected motorcycles there is a possibility that the bellow style gasket can be damaged caused by deviations during assembly. Damage to the bellow gasket may affect the function of the clutch slave cylinder. This could result in the rider noticing a change in shifting behavior and the clutch becoming inoperable to the point where the clutch will not disengage when the clutch lever is pulled in. To ensure the highest level of safety, performance, reliability and customer satisfaction, it is necessary to replace the clutch slave cylinder on all affected motorcycles that have a bellow style gasket clutch slave cylinder mounted (Fig. 1).
HTB2106
Service Bulletin/Repair Instructions
Husqvarna Motorcycles North America, Inc. has decided that a defect which relates to motor vehicle safety exists with the motorcycle models and years listed below in which the alignment of the gear teeth on the license plate holder and swingarm may be positioned incorrectly. This can lead to twisting of the license plate holder and subsequently to the loosening of the rear wheel axle collar nut. For this reason, the correct mounting position of the license plate holder and torque of the rear axle collar nut must be checked. 2018, 2019, 2020 â VITPILEN 701 2019, 2020 â SVARTPILEN 701
HTB2012
Service Bulletin/Repair Instructions
Husqvarna Motorcycles North America, Inc. has decided that a defect which relates to motor vehicle safety exists with the motorcycle models and years listed above in which the fuel may seep or leak from the fuel level sensor mounting area and fuel pump mounting area. To ensure the highest level of safety, performance, reliability and customer satisfaction, it is necessary to install a newly developed fuel tank that has an increased wall thickness along with new gaskets for the fuel level sensor, fuel pump, and fuel tank insert on all affected models. The new fuel tank with thicker walls has an improved sealing behavior.
TB1806
Service Bulletin/Repair Instructions
During the course of quality controls, Husqvarna Motorcycles North America, Inc has found that the tolerances between the decompression weight and decompression screw (marked in blue) are not in specification on select 2018 701 model motorcycles. These auto-decompression system components must be replaced to prevent premature wear.