Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
23-BD-002H
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
21-EM-003H
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
20-BR-002H
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
20-SS-004H
This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the âTire Balance Data Sheetâ must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
20-EE-003H
This bulletin provides information on identifying dealer stock vehicles with either: ⢠A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. ⢠A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
19-BE-011H-1
The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
19-GI-006H
This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
0140010
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODE P0711, P0712 AND P0713. *TT
058
CAMPAIGN 058 . CUSTOMER NOTIFICATION. LOWER CONTROL ARM INSPECTION/REPLACEMENT. *TT
062403
LOWER CONTROL ARM INSPECTION/REPLACEMENT. ROAD SALT MAY RESULT IN CORROSION OF THE FRONT LOWER CONTROL ARMS. SEVERE CORROSION MAY RESULT IN PERFORATION OF THE FRONT LOWER CONTROL ARM. *TT
0290009
SUBJECT REGARDING DIAGNOSTIC GUIDE FOR CLIFFORD AND DEI SECURITY SYSTEM. *JG
071298
SOME VEHICLES MAY EXHIBIT SHIFTING OR CRACKING IN THE UNDERBODY LEFT AND / OR RIGHT LOWER ARM MOUNTING MEMBERS. *TT
9820002
EXPERIENCING A TICKING/COLLAPSED LASH ADJUSTER CONDITION. *YC
97100180001
SERVICE PROCEDURES AND INFORMATION ON WINDOW ADJUSTMENT. *YC
9750002
POWER STEERING RESERVOIR MOUNTING BRACKET DESIGN CHANGE. *TW
9709001
HDS ADAPTER CABLE HY02 INSTALLATION PROCEDURE. *TW
9750001
ACCENT BRAKE BOOSTER CHECK VALVE (SHOP MANUAL CORRECTION). *TW
9760003
TIBURON/ACCENT REAR SPOILER CENTER HIGH MOUNTED STOP LAMP. *TW
9720001
ENGINE MOUNT BRACKET TORQUE SPECIFICATION (SHOP MANUAL CORRECTION). *TW
9720002
THE CYLINDER HEAD TORQUE SEQUENCE FOR IN-LINE 4 CYLINDER ENGINES NOTED IN THE LISTED SHOP MANUALS IS INCORRECT. *JD
9740002
SHIFT CONDITION CAUSED BY SHORT CIRCUIT IN INHIBITOR SWITCH. *TW
9790001
RADIO REMOVAL AND INSTALLATION FOR ACCENT. *TW
9640024
IMPROVED REVERSE GEAR SHIFT QUALITY. *TW
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.